Can't access some web sites with version 4.0

I recently installed version 4.0 and am in test phase of the server.
With or without ACL's turned on, I can't access the following web site
https://www.sunnet.sunlife.com/member/signin/index.asp?
or
https://www.sunnet.sunlife.com/member/
In Internet Explorer, it sits on a blank page with the little world logo spinning around until it finally times out after a few minutes. I've tried accessing these sites with both IE6 and IE 5.5 and get the same problem.
As a footnote, the web access to these sites works fine with our current Web Proxy version 3.6.
Does anyone have any ideas why this isn't working through the new Proxy 4.0?
Thanks

I did some additional testing through Proxy 4. All web sites and web pages including secure sites that I tried accessing over the past couple of days all appear to work fine with the exception of the forementioned sites. Access to these specific web pages (which I cannot currently access) are part of our day-to-day business requirements, and therefore will prevent me from using Proxy version 4.0 as our production proxy unless I can figure out why these web pages won't load, and how to fix the problem.
As an experiment, I tried to access these web pages through Proxy 4 with Mozilla FireFox and Netscape 7. None of these web browsers (including Internet Explorer) will bring up these web pages when going through Proxy 4. But bypassing the proxy or going through our v3.6 proxy works fine for these web pages everytime, and with all browsers. This leads me to believe that this web page access problem is not a browser specific problem, but something in Proxy 4 isn't processing the request to display the page properly.
As a reference, the web site in question is http://www.sunlife.ca. On the left hand side of the page go to "Sign In" then "Plan Members". Thats where the request hangs through Proxy 4 no matter which browser I use, including Netscape... but works perfectly fine with Proxy v3.6.
Can someone who is running a version 4 Proxy also please try to access the SunLife Members login page and see if it works or fails for you?
Thanks

Similar Messages

Can't access some web sites with safari

Can't access financial web site since time before last of safari update. Any help?

In my original post, not today's, I had said I was having the issues on the Mini, running OSX 10.6.8 and Safari v.5.1.5 for my bank's pill pay. I should have been more specific as to which machine and OSX Safari browser I'm having the T-Mobile problem with. My mistake.
It is on both the MacMini and now the Air too. A moment ago, I was able to log in to my.t-mobile.com on the Air, but after putting into my Bookmarks folder, I can't do it anymore. The Log in button comes up greyed out instead of green.
I'm also still having trouble with my bank's bill pay section on both computers too.
I wonder if it's related to the saving of the log in info or putting in the Bookmark Folder?

TS3274 I can't access some web pages with safari like, forever 21, express. Even though I used to access them previously. Why?

I can't access some web pages with safari like forever 21, express .com. Even though I used to access them previously

Ashlee...
Since the apps you mentioned require an internet connection try running the connectivity tests > iTunes for Windows: Network Connectivity Tests

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. Hoy can I go back?

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?

Sorry, you cannot downgrade iOS software.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Can't access some secure sites through proxy?

can't access some secure sites through proxy server on osx it just keeps going local authority couldn't be contacted, i had the same problem with parental controls, but now that is off and its still doing it, is there a setting or something i need to enable?

In my original post, not today's, I had said I was having the issues on the Mini, running OSX 10.6.8 and Safari v.5.1.5 for my bank's pill pay. I should have been more specific as to which machine and OSX Safari browser I'm having the T-Mobile problem with. My mistake.
It is on both the MacMini and now the Air too. A moment ago, I was able to log in to my.t-mobile.com on the Air, but after putting into my Bookmarks folder, I can't do it anymore. The Log in button comes up greyed out instead of green.
I'm also still having trouble with my bank's bill pay section on both computers too.
I wonder if it's related to the saving of the log in info or putting in the Bookmark Folder?

Can only access one web site

I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
when I try to connect to any other site the page Hangs during load and neve displays.
I can ping all of the web sites that do not come up
I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

Hello!
I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
I have an edmx file in a WCF webservice which feeds a silverlight app. The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model. The view is basically { ID, ParentID, Name, ... }. In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure. The edmx and the service build without any errors - hurrah! However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'. Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
Tim
Web Developer at Terrapinn

Using Mac OSX 10.7.1: recently replaced our DSL modum & wireless router and suddently I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing historty, forms, cookies and cache but it continues to happen.

Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

Can not open some web site

Can not OPen some web site such as www.studioclassroom.com

It opens fine on my iPad using Safari. What happens when you try to open it?

I can not open some internet sites with my ipad

since i download new apple software 7.2 i can not open some internet sites with my ipad! it lets me open only english sites nothing else...

Try a soft reboot and see if that helps.
1. Press and hold power + home button until screen goes off and apple logo appears.
2. Once the apple logo appears release both buttons and let the phone reboot.
This helps clear temporary files. I assume you've tried deleting safari from multitasking?
You could always try using a different app top browse the internet.
VPN is another solution as it has helped me out before.
Hope this helps.

What is missing when I get a blank white screen when I try to Access some web sites?

On some web sites, I get a blank white screen when I try to access them.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Safari Does Not Allow Access to Web Sites With Wildcard X.509 Certificates

I'm really getting irritated with the Safari browser in OSX Mavericks. One of the more irritating features involves the inability to access web sites that use improperly constructed wildcard X509 certificates. By improperly constructed, I mean that the X.509 certificate does not contain the host name of the system being accessed in the Subject Alternate Name list.
Earlier versions of Safari would, at least, allow me to examine the X.509 certificate and determine whether I wanted to proceed with the connection. The current version of Safari doesn't provide that option. It simply displays a screen stating that it can't establish a secure connection to the web site. If you actually have a need to access the web site, you need to use a web browser like Firefox.
What's really irritating about this is that Safari had improved to the point where it was reliable enough to be used as the default browser.
Is there a Safari.plist setting that will allow me to change the behavior of Safari when it encounters an improperly constructed X.509 certificate and provide me the opportunity to examine the certificate to decide whether to proceed or not?

Hi
Have a look in your Networks panel in System Preferences. Click on the Advanced button, then Proxies. There may be an errant proxy present blocking the site load.

RTP300-NA v1.1 slow to some web sites with Vista (XP ok)

I have a RTP300-NA VoIP router (v1.1) which works perfectly with Windows XP, but not with Windows Vista. With Vista some web sites work OK, while others have a ~2 min delay. These web sites appear completely and quickly after the initial 2 min. It seems as though something is timing out. It may be coincidental, but the web sites that did not seem to work also did not respond to a ping. (cnn.com has the 2 min delay, but yahoo.com does not.) All web sites work from both XP and Vista using my old router (SMC Barricade SMC7004BR).
I updated the firmware in my RTP300. This did not make a difference, but it may have also been a mistake. I realized later that I have v1.1, while the update was for a v1.0 (there is no update for v1.1)
I also tried various MTU sizes, as suggested by the Linksys web site, with no improvement. My internet connection is via a cable modem.
Any thoughts?
Thank you.

What is the difference between version 1 and 1.1 of the RTP300-NA router?

Internet explore can not open some web site!!

Internet explore cannot open some web site including yahoo game.
whenever opening it, it says that i need to download java virtual machine
and it leads me to Microsoft to download MS virtual machine
but after intalling it, the problem does not disappear.
Some people suggest that using opera, but it is not working, either!!
What is the problem? Does anyone know the solution?
Please reply me!!

Hi,
Internet explore cannot open some web site including yahoo game. whenever opening it, it says >that i need to download java virtual machine and it leads me to Microsoft to download MS virtual
machine but after intalling it, the problem does not disappear.Explorer not opening some web sites indicated that you are not able to open those sites which
do have applets in homepage,probabily you are able to download the applet but that cannot be
executed due to lack of environment(JVM).Although the Explored does have the inbuilt JVM but
I believe in the latest versions they are not providing.
i hope yours is not that case.The other alternative can be explorer getting corrupt or change
in the setting(which I believe you must not have changed)
See if the application comes on different machines explorer.
vickyk

How to enter a secure address in security so i can have access to web site

I used to be able to enter an address from a secure website and be able to access when I had internet explorer and with firefox I dont know where to enter address so I can access the secured we site.

Firefox doesn't have security zones like Internet Explorer. There's no Trusted Sites list to add sites to. Normally, web sites simply work, whether they're secure or not.
If secure websites don't load, see the following article.
* [[Websites don't load - troubleshoot and fix error messages]]
If the website does load but you're having some other problem with it, see the following article.
* [[Websites look wrong or appear differently than they should]]
If neither of those answer your question, please post a link to the site and or a description of what doesn't work, or whatever error message is displayed.

Can't access the web-site in my home folder from the internet. Need help.

I am trying to publish a website from the Sites folder in my home directory. The website is made and I can access it from from every computer within my ethernet. But despite a couple attempts I made I can not get the website published on the internet.
I have an Airport Express station. Two Macs and one PC are using the ethernet. As far as I can tell the Airport Express station is directly connected to the internet. I live in a brand new apartment which has Lan outlets in every room next to the electricity outlets. I have a single designated internet IP address.
To open my computer to the internet I set the "Default Host Option" in the Airport Administrator Utility and selected the default three digits for the "Default Host option" IP address. Then I updated the Airport Express station, manually set the IP address in the Network preferences on my Mac to the "Default Host option" IP address and activated Personal Web Sharing in the Sharing preferences. By doing so I lost my internet connection. It turned out I still had the same IP address that I had before I selected Default Host Option.
As I understand with the Default Host Option I designate one IP address within the ethernet to receive all traffic from outside. But how do you now tell the Airport Express station which computer on the ethernet will be the host for the incoming traffic carrying the Default Host Option IP address? Apparently just setting the IP address manually in the clients computer Network preferences to the "Default Host Option" IP address doesn't tell the Airport Express station to change the IP address it has assigned to this client to the Default Host Option IP address.
In another attempt to make my website accessible on the internet I removed the Default Host Option and instead opened Public Port 80 and Private Port 80 for the IP address of the client computer in the Port Mapping tap of the Airport Administrator Utility. But again, no access to my website from the internet.
To access the website from within the ethernet I use the following web-link, which works fine:
http://192.xxx.x.x/~user/index.html
The internet of course doesn't see the 193 IP address. It only sees the Public IP address. Therefore I used the Public address instead of the Private IP address to connect to my website from the internet:
http://222.xxx.xxx.xxx/~user/index.html
But as I said, I still can't access the website from the internet.
I have the feeling that I conceptually don't understand something correctly. I would appreciate if somebody could help me with this problem.

See this article:
http://support.apple.com/kb/HT1866
Sometimes My Music does not show up in special folders in TweakUI.
If so, see this post:
http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188##
If you would rather not mess with the registry you can often work round with a shift key start.
Hold down the shift key and start iTunes, keep holding down the shift key until you are asked to choose or create a library. If you already have one, navigate to your iTunes folder and choose iTunes Library.itl. Otherwise create a new library in My music.

Can't access some web sites with version 4.0

Similar Messages

Maybe you are looking for