Can't access some websites from XP machines on the network, but Win7 PC's ok

Hi,
We have a SBS installation with both XP and 7 PCs on it. Within the last couple of weeks the XP units have become unable to access certain websites, although others are ok. Windows 7 PC's are fine. Pings to the affected sites are also ok from either XP or
7. Despite a lot of effort trying to discover the reason we are not any closer to a solution. Could anyone suggest how we might track down the source of the issue ?
Many thanks

Hi,
Please try to reset the IE on the XP client. This issue may be caused by misconfiguration of the Internet Explorer.
Please check if there is any firewall rule block the TCP port 80 of the specified website.
To check if the TCP port 80 is open, please use the portqry tool.
To download the portqry, please click the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=24009
If the TCP port 80 is block on the specified website, please check the network settings. Normally, this issue is caused by the misconfiguration of the firewall. Also, incorrectly configured proxy or router will cause this issue too.
If the TCP port 80 is open, we may need to perform a network capture on the XP client.
To download Network Monitor, please refer to the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Can you access ~\Users\Sharing from a PC on the network?

    I have a mixed home network of 3 PCs and one Mac Mini. I want to store all the digital music on the Mac Mini and share it with the PCs.
    I have successfully created networking links between the PCs and the Mac. For example, I setup a MYPC account on the Mac and I can map a PC network drive to \\MacMini\MYPC\Music. This works fine, and survives a reboot. BUT IT ONLY GETS ME INTO THE FOLDER ON THE MAC WITH THAT USER'S FILES (MYPC), NOWHERE ELSE. So it's not a directory everyone can use (public).
    I am trying to map \\MacMini\Users\Sharing and I can't get to it from the PC at all. I've tried using the IP address also. Nothing gets me there. This is after being connected in as an authorized account on the Mac. I thought that folder was open to all? Any suggestions?
    I've also tried using a public folder on the Mac account to share. Also unsuccesful. Each PC user can easily see their own public folder (and more). Sometimes after I'm logged in, I can directly type in the address \\MacMini\MacUser\Public and see it, but it's intermittment and unpredicatable. I'm, open to this route, if I could get it to work.
    This is a real head-scratcher. Please help me out.

    You will need to use Sharepoints in order to share specific folders
    http://www.hornware.com/sharepoints/
    iFelix

  • I can't access some websites

    I have a brand new macbook air and for some reason out of the blue I can't access some websites everything worked fine up till now.

    Down For Everyone Or Just Me -> Check if your website is down or up

  • HT201250 Can I restore photo files from Time Machine without the use of an external drive?  I'm trying to restore lost photo files and I see them listed in Time Machine (without use of an external drive), but when I try to restore I get a error code 36.

    Can I restore photo files from Time Machine without the use of an external drive?  While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean!  When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message:  "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"

    Thanks so much Terence.  I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
    http://pondini.org/TM/E9.html
    That worked like a charm.  I really appreciate it. 

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • Can you access time capsule from a mac over the internet

    Can you access time capsule from a mac over the internet?

    Yes. See this thread about how to access the disk attached to a Time Capsule.  Access to the Time Capsule itself can be done similarly.

  • Can't access some websites. Possibly DNS problem.

    This problem only started to occur a couple of days ago. I found that I can't access certain websites,but all the other computers in exactly the same network environment have no problem accessing them. I tried changing my DNS server settings from the servers my ISP provided to the Google DNSs, 8.8.8.8 and 4.4.4.4, and those websites I couldn't access before became accessible immediately, but some other websites, which I was able to access with the DNS provided by my ISP before, became inaccessible again. I tried using another set of DNS addresses, the same thing happened: some websites that I couldn't access before became accessible, but some others become inaccessible again. All these DNS servers that I used work perfectly on other computers in my network, so it has to be the problem of my computer. This has nothing to do with the browser, as all of the browers in my system have the same problem, even including the Internet Explorer in my VMware Windows virtual machine. I tried flushing the DNS cache with dscacheutil -flushcache, and it didn't work.
    I'm using Lion 10.7.3 on MacBook Pro MC371. Please help!

    Please give an example of a site you can't access now.

  • Can't access some websites and speed problem

    Hi guys,
    I hope to find some help here please as I am desperate! 
    It has been a week now that I am having problems with my broadband, suddenly I can't access some italian's websites (which I was able to access before). The browser tries to load up the page but nothing happens (it doesn't even give me an error). I tried those website on both my laptops (one windows and one mac) and on 3 different browsers but I have the same problem. 
    I even tried to use Google DNS on my mac but that didn't solve the problem, I have already tried to reset my BT home hub but again that didn't help.
    Any ideas?
    The other thing is that my broadband speed is really strange, because before it used to be very fast during the day (500-600 kb/s download) and really slow during peak-hours (which I know is normal). But for the past month it has been really slow (70kb/s download) even during the day, it has some brief moments when it's slightly faster but not as fast as before. Any suggestions on what would be the problem or what I can try?
    I will really appreciate your help.
    Thank you all 
    Robbie

    Blade79 wrote:
    Thanks for your reply.
    These are 2 websites I know I can't access:
    www.deejay.it
    www.gazzetta.it
    These are the adsl stats from my router and the speedtest:
    I hope this helps,
    Thanks a lot
    Robbie
    Hi there,
    Both sites load almost instanty for me on my Infinity connection.
    Below's a traceroute output
    Last login: Tue Nov 30 18:02:04 on ttys000
    ds9:~ Kev$ traceroute -I www.gazzetta.it
    traceroute: Warning: www.gazzetta.it has multiple addresses; using 194.20.158.242
    traceroute to www.gazzetta.it (194.20.158.242), 64 hops max, 72 byte packets
    1 api (192.168.1.254) 1.083 ms 0.672 ms 0.637 ms
    2 217.32.146.68 (217.32.146.68) 6.721 ms 6.462 ms 6.458 ms
    3 217.32.146.110 (217.32.146.110) 8.307 ms 8.792 ms 8.140 ms
    4 213.120.177.42 (213.120.177.42) 7.336 ms 7.540 ms 7.961 ms
    5 217.32.24.30 (217.32.24.30) 7.040 ms 7.009 ms 7.224 ms
    6 217.32.24.178 (217.32.24.178) 7.280 ms 7.126 ms 7.241 ms
    7 acc1-10gige-0-2-0-4.l-far.21cn-ipp.bt.net (109.159.249.97) 7.724 ms 7.619 ms 7.111 ms
    8 core1-te0-4-0-6.ealing.ukcore.bt.net (109.159.249.1) 8.806 ms 8.123 ms 8.569 ms
    9 core1-pos1-0-0.telehouse.ukcore.bt.net (62.6.201.82) 8.686 ms 8.687 ms 8.642 ms
    10 ge-0-0-1.londra32.lon.seabone.net (195.22.209.45) 8.965 ms 8.785 ms 8.998 ms
    11 te4-1.milano52.mil.seabone.net (195.22.205.255) 33.067 ms 33.454 ms 33.081 ms
    12 infracom.milano52.mil.seabone.net (195.22.205.62) 32.753 ms 33.112 ms 32.629 ms
    13 milano-1-tge-3-1.ita.tip.net (62.196.4.250) 34.502 ms 34.290 ms 33.722 ms
    14 * * *
    15 *^C
    ds9:~ Kev$ traceroute -I www.deejay.it
    traceroute to www.deejay.it (213.92.16.220), 64 hops max, 72 byte packets
    1 api (192.168.1.254) 1.066 ms 0.634 ms 0.673 ms
    2 217.32.146.68 (217.32.146.68) 6.687 ms 6.515 ms 6.647 ms
    3 217.32.146.94 (217.32.146.94) 7.512 ms 7.312 ms 7.501 ms
    4 213.120.177.34 (213.120.177.34) 7.361 ms 7.232 ms 7.339 ms
    5 217.32.24.30 (217.32.24.30) 6.593 ms 6.573 ms 6.927 ms
    6 217.32.24.178 (217.32.24.178) 7.148 ms 7.152 ms 6.948 ms
    7 acc1-10gige-0-2-0-7.l-far.21cn-ipp.bt.net (109.159.249.103) 7.578 ms 7.565 ms 7.629 ms
    8 core2-te0-4-0-6.ilford.ukcore.bt.net (109.159.249.5) 8.223 ms 8.114 ms 8.850 ms
    9 transit2-xe-0-1-0.ilford.ukcore.bt.net (194.72.20.250) 43.650 ms 7.958 ms 8.104 ms
    10 t2c2-ge8-0-0.uk-ilf.eu.bt.net (166.49.168.113) 8.729 ms 8.506 ms 8.561 ms
    11 t2c1-p3-1-1.uk-lon1.eu.bt.net (166.49.164.97) 8.668 ms 8.553 ms 8.333 ms
    12 t2a1-ge4-0-0.uk-lon1.eu.bt.net (166.49.135.102) 8.736 ms 8.937 ms 8.829 ms
    13 166-49-211-38.eu.bt.net (166.49.211.38) 8.638 ms 8.829 ms 9.038 ms
    14 so-5-0-0.mil19.ip4.tinet.net (213.200.82.30) 37.702 ms 37.824 ms 37.312 ms
    15 inet-gw.ip4.tinet.net (213.200.68.22) 47.007 ms 46.396 ms 46.148 ms
    16 ge3-0-28.wf1-kwcore.wf.inet.it (212.239.110.34) 49.292 ms 49.117 ms 51.695 ms
    17 www.deejay.it (213.92.16.220) 47.686 ms 47.109 ms 47.052 ms
    ds9:~ Kev$
    I hope this info helps.

  • Can't access some websites - URL is hijacked by "unotelly" - ??

    This has a virus-like feel to it... I can't access certain websites,. When I do, I'm bumped to a site for Untotelly.
    I type: www.bbc.co.uk
    And I go to:  http://quickstart3.unotelly.com/?origin=http://www.bbc.co.uk/
    At the top of that page I'm asked to "please update your IP address"  (among other things) .. which I'm reluctant to do.
    The question is: how do I stop this from happening?

    I'd think that the DNS settings on your computer or router have been changed to unotelly's ones.
    How to remove UnoDNS : UnoTelly Customer Service

  • Can't access some websites using time capsule

    Everything has been working just fine with my time capsule and my imac and just today I couldn't access some websites for some reason. I tried many other sites including this one and can get to them no problem. I have been through all of the airport settings and trouble shooting and can't find any problems, also the other 2 computers and my blackberry can't access some of the same sites either, I am stumped. Does anyone out there have any idea whats going on? Thanks for your help!

    Welcome to the discussions!
    Suggest that you contact your ISP. It sounds like their DNS server is overloaded at the moment, but also unlikely that they will ever admit it.
    It wouldn't hurt to power cycle your complete network as well. Just power everything down, order is not important.
    Start the modem first and let it run a few minutes by itself.
    Then start the next device connected to the modem, probably your Time Capsule, and let it run a few minutes.
    Then start your computers and devices one by one the same way.
    Message was edited by: Bob Timmons

  • How can we read some bytes from every line of the file

    How can we read some bytes from the every line of the file moving on to the next line
    without using the read line

    Actualiy readLine() takes more execution time
    for reading a part of line if we can do so without
    readLine() we can save some time...Well, if you knew, beforehand, the length of each line, you could use RandomAccessFile and its seek method, but, since you don't, you would have to read the rest of the line character-by-character, checking to see if it is a newline, in order to place the "cursor" at the beginning of the next line in order to read the next few characters you want.
    So, as you can see, you will need to read the entire line anyway (and if you do it yourself you also have to do the checking yourself considering all three possible end-of-line sequences), so you just as well use readLine().
    Some people may suggest Scanner and it's nextLine() method, but that also needs to read the rest of line (as evidenced by the fact that it returns it), so that is no different than the readLine() (or read it yourself) solution.

  • How can i select some row from multiple row in the same group of data

    I want to select some row from multiple row in the same group of data.
    ColumnA        
    Column B
    1                  OK
    1                   NG
    2                   NG
    2                          NG
    3                          OK
    3                          OK
    I want the row of group of
    ColumnA if  ColumnB contain even 'NG'
    row , select only one row which  Column B = 'NG'
    the result i want = 
    ColumnA         Column B
    1                         NG
    2                   NG
    3                          OK
    Thank you

    That's some awful explanation, but I think this is what you were driving at:
    DECLARE @forumTable TABLE (a INT, b CHAR(2))
    INSERT INTO @forumTable (a, b)
    VALUES
    (1, 'OK'),(1, 'NG'),
    (2, 'NG'),(2, 'NG'),
    (3, 'OK'),(3, 'OK')
    SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
    FROM @forumTable f
    LEFT OUTER JOIN @forumTable f2
    ON f.a = f2.a
    AND f.b <> f2.b
    GROUP BY f.a

  • After 10.9.4 update can't access certain websites from any browser

    I just updated to 10.9.4 Saturday evening the 26th.   Sunday morning I noticed that I was unable to get to some websites but they worked from the ipad and other devices in the house so I rebooted thinking something odd was going on post update.   It happened again a few times until I realized a pattern.  I can not get to facebook, mail.google.com, google.com or most SSL only websites.  Sites that redirect you to an SSL URL just sit there until they eventually time out.  I can go to cnn.com but I can't load apple.com
    if I try to go to bing.com which surprisingly doesn't force you to SSL it loads every time.   This is reproducible in SafarI, Firefox, and Chrome consistently.  Rebooting no longer resolves the issue and I couldn't even come here to post this from the iMac because the discussion website eventually forces you to use SSL. (Actually, while posting this that URL eventually appeared after a very long wait.  Other websites eventually time out entirely.  Safari fails to load Facebook at all)
    EtreCheck version: 1.9.12 (48)
    Report generated July 28, 2014 at 12:31:05 AM EDT
    Hardware Information:
    iMac (27-inch, Late 2012) (Verified)
    iMac - model: iMac13,2
    1 3.4 GHz Intel Core i7 CPU: 4 cores
    8 GB RAM
    Video Information:
    NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
    iMac 2560 x 1440
    DELL 2208WFP 1680 x 1050 @ 60 Hz
    System Software:
    OS X 10.9.4 (13E28) - Uptime: 0 days 1:9:53
    Disk Information:
    APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
    EFI (disk1s1) <not mounted>: 209.7 MB
    disk1s2 (disk1s2) <not mounted>: 999.35 GB
    Recovery HD (disk1s3) <not mounted>: 650 MB
    APPLE SSD SM128E disk0 : (121.33 GB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    disk0s2 (disk0s2) <not mounted>: 120.99 GB
    Boot OS X (disk0s3) <not mounted>: 134.2 MB
    Hitachi HDS723020BLA642 disk2 : (4 TB)
    disk2s1 (disk2s1) <not mounted>: 66 KB
    G-RAID (disk2s3) /Volumes/G-RAID: 4 TB (1.38 TB free)
    USB Information:
    Seagate Backup+ Desk 3 TB
    EFI (disk5s1) <not mounted>: 314.6 MB
    disk5s2 (disk5s2) <not mounted>: 3 TB
    Boot OS X (disk5s3) <not mounted>: 134.2 MB
    Seagate Backup+ Desk 3 TB
    EFI (disk4s1) <not mounted>: 314.6 MB
    disk4s2 (disk4s2) <not mounted>: 3 TB
    Boot OS X (disk4s3) <not mounted>: 134.2 MB
    SCM  USB3.0 CF SD 
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. iPhone
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
    Apple Inc. thunderbolt_bus
    LaCie eSata Hub
    Gatekeeper:
    Mac App Store and identified developers
    Kernel Extensions:
    [not loaded]at.obdev.nke.LittleSnitch (3883 - SDK 10.8) Support
    [not loaded]com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
    Startup Items:
    ciscod: Path: /System/Library/StartupItems/ciscod
    ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    Launch Daemons:
    [loaded]com.adobe.fpsaud.plist Support
    [loaded]com.bombich.ccc.plist Support
    [running]com.cisco.anyconnect.vpnagentd.plist Support
    [loaded]com.google.keystone.daemon.plist Support
    [loaded]com.microsoft.office.licensing.helper.plist Support
    Launch Agents:
    [not loaded]com.adobe.AAM.Updater-1.0.plist Support
    [running]com.adobe.AdobeCreativeCloud.plist Support
    [running]com.brother.LOGINserver.plist Support
    [running]com.canon.MFManager.plist Support
    [loaded]com.cisco.anyconnect.gui.plist Support
    [loaded]com.citrix.AuthManager_Mac.plist Support
    [running]com.citrix.ReceiverHelper.plist Support
    [running]com.citrix.ServiceRecords.plist Support
    [loaded]com.google.keystone.agent.plist Support
    User Launch Agents:
    [loaded]com.adobe.AAM.Updater-1.0.plist Support
    [loaded]com.adobe.ARM.[...].plist Support
    User Login Items:
    iTunesHelper
    Arq Agent
    VLCStreamer
    Dropbox
    ImageTransferUtility
    WirelessCameraService
    AdobeResourceSynchronizer
    Internet Plug-ins:
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 10.1.6 Support
    AdobePDFViewer: Version: 10.1.6 Support
    Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
    Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
    CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
    WebEx64: Version: 1.0 - SDK 10.6 Support
    3rd Party Preference Panes:
    Citrix ShareFile Sync  Support
    Flash Player  Support
    Flip4Mac WMV  Support
    FUSE for OS X (OSXFUSE)  Support
    fuse-ext2  Support
    Printopia  Support
    Time Machine:
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    G-RAID: Disk size: 4  Disk used: 2
    Destinations:
    Seagate Backup Plus RAID [Local] (Last used)
    Total size: 5 
    Total number of backups: 62
    Oldest backup: 2014-01-20 04:06:23 +0000
    Last backup: 2014-07-28 03:53:23 +0000
    Size of backup disk: Too small
    Backup size 5  < (Disk used 2  X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
    Top Processes by CPU:
         2%Google Chrome
         2%WindowServer
         1%fontd
         0%firefox
         0%hidd
    Top Processes by Memory:
    279 MBFinder
    275 MBfirefox
    221 MBcom.apple.ShareKitHelper
    188 MBWindowServer
    180 MBcom.apple.IconServicesAgent
    Virtual Memory Information:
    3.43 GBFree RAM
    3.24 GBActive RAM
    376 MBInactive RAM
    975 MBWired RAM
    922 MBPage-ins
    0 BPage-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Can't Access Some Websites

    Hi there!
    I've searched all over the forums and the internet for help on this topic, but none of the solutions I've found prove to be anything more than false hope. 
    I have had this problem for 2 days now and it's driving me nuts! For some reason, I can't access my personal website (http://www.the-visionary.net) or the host (http://www.rigrag.com) but both are up and working. Friends can access it, I can access it at work, but I cannot access it at home. I've tried getting to both websites from multiple computers (a total of 4, plus an iPod Touch) and nothing seems to be able to access them which leads me to believe it's the included FiOS wireless router.
    I've tried using free services such as OpenDNS.com and a few others, both by way of changing the router settings and personal computing settings, though none have been able to fix the situation. i honestly have no clue where to go from here. I've looked over the router settings, restarted, reset - nothing. 
    Does anyone have any idea what I can do to get my website back! 
    Thanks in advance,
    Mitchell

    Both websites you mention run on the same IP address.
    Enter 69.10.57.170 into your browser and see if you see a blue Apache screen. 
    If you do see that page it's likely a DNS issue.
    If you can't get that site to launch then it could be that your IP address is blocked from that site.  You could try reaching the webmasters of those sites and asking them to unblock your IP

  • I can't access some websites, log in on some websites or have some websites remember my username and password.

    Before I asked this question, I went through all the questions and answers and guides that were about problems similar to these but they never worked.
    For some websites, it's as simple as not being able to log in. I will enter my account details but it will take me back to the log in page.
    Some websites say that they can't 'redirect properly'.
    I've looked up the solutions to these problems, but they didn't work. I think I'm experiencing another problem because one of the solutions that I think might work isn't being completed properly. When I try to do the 'use custom settings for history' fix, Firefox never remembers my settings.
    The only add-on I have is AdBlock Plus.

    This issue can be caused by corrupted cookies or cookies that are blocked.
    *check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for