Can't access ssl pages

My friend got a PowerBook G4 from a family member. It runs 10.4.11. First thing off the bat: It wont connect using WPA2-Enterprise. Browsing works, but not for any SSL pages. (Safari and Firefox)
I am told it worked just fine. So I suspect someone deleted vital keychain information prior to giving it to him. Could someone direct me how to recover from this.

Hello,
If it's the original 802.11b Airport card, it's limited to WEP or WPA, no WPA2.
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might try reapplying the big 10.4.11 combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Repair Permissions afterwards, reboot.

Similar Messages

I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc.

I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc. Who have ever found this problem,
pls. help.
The pop up error msg. is "Sorry, you don't have access to this page"

Hi,
According to your description, after you cleared job queue about force check-in then you can't access some pages in PWA.
Maybe you need to check in the pages which has been checked out.
If you have administrative rights, it is possible to override the check-out via the View All Site Content page:
Site Actions->View All Site Content->Pages->Hover the item you want to check in, and from the context-menu (arrow-down next to the filename), choose "Discard Check Out"
Besides, to troubleshooting the error “Sorry, you don't have access to this page”, refer to the following articles:
http://sharepoint.rackspace.com/sharepoint-2013-troubleshooting-an-access-issue-with-a-custom-master-page
http://technet.microsoft.com/en-us/library/ff758656(v=office.15).aspx
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

it may be your browser. CHeck the folloinwg
1) Turn on Compatibilty mode
2) Security Options / Make it a local trusted site
3) Turn of Protected Mode in the browser under Security
and have you tried it from Chrome
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Can I undo iCloud Drive? I can't access my Pages docs on iMac since I upgraded to OS 8, unless I upgrade to OS X Yosemite. I don't need ICloud!

Can I undo iCloud Drive? I can't access my Pages docs on iMac 10.9.5 since recent upgrade, unless I also upgrade to OS X Yosemite. I don't need iCloud for docs.

Hi ..
Unfortunately, you're stuck between a rock and a hard place until Yosemite is released this fall. Hopefully sometime in October.
http://www.tuaw.com/2014/09/16/be-aware-be-careful-be-prepared-for-icloud-drive/

How can I access eBay pages marked "blocked due to legal restrictions of some countries"/ All other browsers do not block.

Using Vista Ultimate 64x and Firefox (any version) I keep hitting eBay page blocks that read "Unfortunately, access to this particular item has been blocked due to legal restrictions in some countries..." These same pages can be accessed with IE or Chrome so it is not really a legal restriction.
How can I get Firefox to allow these eBay pages to display? I include the url of one blocked page.
This happens on eBay and eBay-UK

Prohibited and restricted items over view for eBay...Link to
http://pages.ebay.ca/help/policies/items-ov.html
Beware of items as they relate to Cuba... Some Cuban items can be sold in the US, while others cannot be sold in the US....based on US government regulations.
No restrictions for Canada...with respect to anything from Cuba
Then there are country restrictions as identified by Canada Post... Link to
http://www.canadapost.ca/tools/pg/manual/PGcustoms-e.asp
A most interesting situation
A box that originally contained Cuban Cigars, was overprinted to read Coban Cigars, an obvious overprint, missed on first inspection...
It is always important to know what is not acceptable....
another situation..
France has a restriction on receipt of toys made in China.... always state country of origin
Also be aware of country specific restrictions
Sometimes things may not be too obvious such a publisher with a Canadian address, that had a book printed in China....Hong Kong or elsewhere....not in Canada

Can't access login page in IE

Hi,
Some of my participants/customers, from the same
organization, can’t access the login page when they are going
to participate in a meeting. They can access the login screen for
Connect Pro Central but not for the meeting. For example the can
access
http://wezupport.emea.acrobat.com
but not
http://wezupport.emea.acrobat.com/support.
They just get a message that the site cannot be displayed. This
happens with Internet Explorer (6.0) but not with Firefox.
Has anyone experience this problem?
Dan

Björn, I too log in from Sweden and have the same issue: open the forums' page, log in and I am sent automatically to the "sorry, this page is not available" alternatively I get an error 404. As soon as I am sent to the "sorry, this page is not available" I too get automatically loggen in, but if I go back to the forums page (doesn't matter how, if I refresh, go back or open in a new window), I am not inlogged and the process continues.
I have to go through that at least 3 times before this jumping to and fro ends and the forum recognizes me.

Can't access FB page on MacBook pro or on iPhone5

I haven't been able to view the FB page for two days now. I keep getting this message; This webpage is not available. When I click on the "more" button I read the following: Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.
There is nothing wrong with my internet, I can access any other webpage without any problem. I also hadnt experienced any problems before.
For a while I could still access the page on my iphone 5 app, though it kept experiencing "network error" problems, but now the app wont even load my newsfeed or let me see my profile. What is going on?

It has happened a few times since I changed some account information (billing address and phone number) a couple of days ago.
Every time I purchased a song or an album via Music app on my iPod touch, I couldn't access App Store or iTunes Store on my MacBook Air or iPod. Then I went to bed and got up the next day, finding out everything back to normal.
Since it happened several times and I lost all my access to both App Store and iTunes Store on both my devices every time, I think the problem may be related to my Apple ID. It's really strange.

How can call/access ADF page in OAF rich container

Hi,
I want to access ADF page it's typicall have some graphs in OAF region
for this i have create the one function in EBS and added that in respective responsibility.
i have creted one region--->item in my page and for item i put itemStyle as richContainer and in Destination attribute i given the fucntion which i created in EBS.
When i try to run the page i got the page not found message in region.
is any thing i missed out.?
Please let me know how can i acchive this.
Please help me on this.
Thanks,
Madhava

Hi Keerthi .
Thanks for u'r reply.
My ADF app deployed in Weblogic server it's different server.
I am able to call the ADF page after clicking the Button.
I am facing the issues the calling ADF page in richContainer.
i got msg leike below.
The webpage cannot be found
HTTP 404
Most likely causes:
•There might be a typing error in the address.
•If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to and look for the information you want.
More information
Please help me on this.
thanks,
Madhava

ASA Clientless SSL VPN can't access login pages on websites

When I'm doing a clientless SSL VPN to my ASA and using the ASA to browse websites, I can pretty much go on to just about any website except specificly login websites. I can go on google and yahoo but when I click the "mail" button it just gives me an error message "Connection Failed - Server (site name) unavailable. When I go onto hotmail.com, it says server hotmail.com unavailable. When I browse by entering hotmail's IP address in, it says "Bad Request." Same happens on ebay, youtube, etc. Funny thing is, the ONLY login page I can get onto is Cisco's website's login page. I tried changing DNS servers, nothing changed. Here is my configuration:
show run
: Saved
ASA Version 8.4(4)1
hostname PatG
domain-name resolver4.opendns.com
enable password aDvdtQE/ih5t061i encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa844-1-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group Comcast
name-server 75.75.75.75
domain-name cdns01.comcast.net
dns server-group DefaultDNS
name-server 208.67.220.222
name-server 208.67.220.220
domain-name resolver4.opendns.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Remote1 protocol radius
aaa-server Remote1 (inside) host 192.168.1.8
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console Remote1
aaa authentication http console Remote1 LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain redtube.com
dhcpd auto_config outside
dhcpd option 150 ip 192.168.1.15 192.168.1.5
dhcpd address 192.168.1.5-192.168.1.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
tunnel-group-list enable
group-policy Eng internal
group-policy Eng attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value EngineerMarks
group-policy RemoteHTTP internal
group-policy RemoteHTTP attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value Test
customization value Extra
username user1 password mbO2jYs13AXlIAGa encrypted privilege 0
tunnel-group Browser type remote-access
tunnel-group Browser general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST type remote-access
tunnel-group TEST general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST webvpn-attributes
group-alias testing enable
group-url https://24.19.162.53/testing enable
tunnel-group Engineering type remote-access
tunnel-group Engineering general-attributes
authentication-server-group Remote1 LOCAL
default-group-policy Eng
tunnel-group Engineering webvpn-attributes
group-alias engineering enable
group-url https://209.165.200.2/engineering enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect http
policy-map map
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
password encryption aes
Cryptochecksum:843e718c8d4b23b5f421f82fc0a0c255
: end
Can anyone please help me? Thanks

In your crypto ACLs for the site-to-site tunnels, add the ASA's public IP destined to the remote network, and mirror this ACL on the remote end VPN device.
Example:
ASA public IP: 2.2.2.2
Remote network: 192.168.1.0/24
access-list vpn_to_remote_network permit ip host 2.2.2.2 192.168.1.0 255.255.255.0
Mirror the above acl on the remote end router.
PS. If you found this post helpful, please rate it.

Can't access SSL-secured web content from Remote Desktop Server

I am running RDS on Windows Server 2008R2. No Remote App or Gateway Services, just straight up Remote Desktop.
After making a RDP connection to the server, when trying to access any SSL-secured website, Internet Explorer displays the error "Internet Explorer cannot display the webpage" with a button labeled "Diagnose Connection Problems." It's the same generic
IE message that appears when DNS lookups fail. This failure to make SSL connections also manifests itself with Exchange autodiscover not working.
Strangely enough, Administrator is able to make SSL connections just fine, just not any other users. The server is otherwise completely functional.

Hi cyborganic,
To narrow down this issue, Would you like to confirm the following questions:
1.
Does this issue exist when accessing all secured web sites or just some of them? Please try to access
https://www.microsoft.com.
Does it work?
2.
Does this issue exist when a user logs on to the console of the problematic server and then access a secure web site? In this way, we can isolate whether the problem is related
to RDS.
3.
You mentioned that administrator can access properly. As a test, can a problematic user be able to access the SSL site properly if you add him/her to the Administrators group
temporarily?
Meanwhile, Please help to make sure the “Cryptographic services” is set to Automatic Start.
Here, There are some suggestions for
General troubleshooting
Suggestion #1:
=====================================================================
Run the Network Diagnostics tool in Internet Explorer
To do this, follow these steps:
1.
Start Internet Explorer, and then try to access the Web page that is displaying the error message.
2.
On the page that displays an Internet Explorer error message, click the
Diagnose Connection Problems link. The Network Diagnostics tool will run. When the tool has finished running, it will report one of the following results:
o
It was unable to find a problem.
o
It has detected a problem. Additionally, the tool will provide guidance about the next steps to take to troubleshoot the problem.
Note
Internet Explorer 6 users click Detect Network Settings
3.
Click
IP Address, and note the IP Address. You may need it for future troubleshooting.
4.
Follow the steps in the Network Diagnostics tool to fix any connection problems.
5.
Start Internet Explorer.
If you receive the same error message, go to the next method.
Suggestion #2:
=====================================================================
Use the Delete Browsing History feature
If resetting the modem or the router did not resolve the problem, deleting your browsing history might help. Follow
these steps to remove your temporary Internet files, history, and form data:
Internet Explorer 8
1.
Start Internet Explorer.
2.
On the
Tools menu, click Internet Options.
3.
Under
Browsing history, click Delete.
4.
Select the check box next to
Preserve Favorites website data.
5.
Select the check box next to
Temporary Internet Files.
6.
Select the check box next to
Cookies.
7.
Select the check box next to
History.
8.
Select the check box next to
Form data.
9.
Select the check box next to
InPrivate Filtering data.
10.
At the bottom of window, click
Delete.
11.
Close Internet Explorer, start Internet Explorer again, and then try to access the Web page.
Suggestion #3:
=====================================================================
Use the Internet Explorer (No Add-ons) mode
To do this, click
Start, point to All Programs, point to
Accessories, point to System Tools, and then click
Internet Explorer (No Add-ons).
Note Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.
If this resolves the issue, follow these steps to isolate the browser add-on that is causing the issue:
1.
Click
Tools, and then click Internet Options.
2.
Click the
Programs tab, and then click Manage add-ons.
3.
Click an add-on in the
Name list, and then click Disable.
4.
Repeat step 3 until you identify the add-on that is causing the issue.
If this issue still persists, Pls refer to the following link for
Advanced troubleshooting
You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage”
http://support.microsoft.com/kb/956196

Can't access SSL site in Firefox.

A am attempting to access a Cisco server with a self-signed certificate. I can access it in MSIE.
When I try to access the server, I get the Firefox error “This Connection is Untrusted”.
I choose the option to “Add Exception”.
The following dialog box says; “Valid Certificate. There is no need to add an exception”, and does not give me the ability to “Confirm Security Exception” like it normally would. My only option is to “cancel” and go back to the previous error “This Connection is Untrusted”.
How do I get Firefox to allow me to access this web server?
== URL of affected sites ==
http:// private

Yes! This is exactly my problem today. I keep getting "This Connection is Untrusted" for a server with a "wrong domain" certificate. (We're using https to get SSL encryption, not authentication.)
Normally, I click "I understand the risks" and tell it to "permanently store this exception", and it lets me through, at least for an hour.
Long-term problem: I've done this about two hundred times over the last several years, and it *still* coughs up this warning about one out of three attempts. (Yes, the system time is correct on my laptop. No, I don't do anything complicated about restoring settings or deleting cookies or anything like that.) I need a "really, really, REALLY permanently store this exception" button, not the "maybe sometimes store this exception for a while" button.
Today's problem:
I'm trying to get to foo.bar.com.
It chokes on an "untrusted" certificate, claiming that the certificate is valid only for www.bar.com. When I click it reloads the certificate and says... "This site provides valid, verified information"... to baz.bar.com.
Okay, so let's reload the page... and I'm back to "This Connection is Untrusted" — it's unhappy about the www.bar.com certificate again.
Seriously, I've done this cycle more than a dozen times in the last hour. How the heck do I get it to let me through to my server? And in the bigger picture, will we ever have a setting that says, "When going to foo.bar.com, just use SSL and do not even ask for the bleeping certificate"?

How do I / Can I access "prior" pages in a PDF Doc in iBooks?

I am producing a pdf document that is a decisiopn tree that is to be used on an iPad or iPhone in, of course iBooks for species identifications. I create the book in Pages (for the vector graphics & text) and am placing links using Acrobat. I would like to allow the reader/ user to retrace their steps back through the decision tree the same as is inherent to Acrobat & Reader. But of course the menuing items to do this are not accesible in iBooks nor in any other implementation of a PDF reader that I have found in ios. Is this something (prior page stack - does it exist?) I can access through the developers toolkit?

See your other post.
Peter

Can't access Google pages

Has anyone else had trouble accessing gmail, Google search engine, or anything else Google-related over the past three days? I can't load anything. When I try with Safari I get:
The error was: “lost network connection” (NSURLErrorDomain:-1005)
I have a free Netscape browser that I downloaded because Safari won't open things like RealPlayer within a webpage sometimes, and when I tried to get on Google.com this morning with the Netscape Navigator, it told me "The document contains no data."
Has anyone else had trouble getting onto Google sites? I figured this was Google's problem because I can access all other websites.

So it was a problem with my service provider all along, and there appears to be nothing I can do about it.
Have you spoken with your ISP? Not sure why you think they cannot help you?
Usually, where there is a specific page not loading, the problem indicators are either a cache or cookie problem if it's OS related, or cable box or cable line if originating from the ISP.
The other day, I Archived and Installed (my first in Tiger) due to an unrelated problem, so I empathize with you about the frustration of going down that path. I have bootable clones set up on my firewire external, one being a very basic "pure" version of Tiger having a few utilities and Safari. Seems my problem migrated to my regular system clone before I realized what was going on. Booting from the "pure" clone showed me the problem was with the OS. Rather than dissect it further, I opted for the A & I. So, clones can be very helpful diagnostic tools for figuring out where a problem originates. Of course, the alternative is "time on the telephone", which is in my top 3 of things I do not like to do! You may want to consider having a similar backup strategy. I use SuperDuper for creating the backups.
If you are complete with this thread, please mark it as answered, and if you are so inclined, assigning either a helpful or solved next to my name. Seeing the thread "answered" helps others searching for a solution to a similar problem.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.6) LaCie 160gb d2 HD Canon i960 printer

I can't access my pages documents when i downgraded from yosemite to maverick

So i do a backup before i get yosemite and then i get yosemite. i also get the update for pages. a week later i decide i do not want yosemite so i downgrade by restoring the time machine backup i did before i got yosemite but in the week i had yosemite i made some page documents and i knew they wouldn't be there when i went back to maverick so i copied them onto a usb. i now have maverick but it won't let me open the files on that usb because they were made using the new version of pages. is there a way so i can access them again? please help. also i am using a macbook air if that helps.

The only way you'll be able to access them is to use Time Machine to revert back to a version that was saved before you updated Pages.
If you still had the newest version of Pages you could export the documents to Pages '09 format, and then update them to the version of Pages you have.

Weird! Can't access any page on my iPod but Google??

The only page I can access is Google on Safari. This is weird.
The error message I keep getting is that the server stopped responding.
This is the case with all websites accept the home page on Google's search engine site.
My Computer has not problems at all with any pages.
Please help?

Hi Gallon,
Thank you for your reply.
I have checked the WiFi Settings, and there are bars showing a WiFi Connection.
I have also checked all of the numbers under the DHCP in the connection settings and they are identical to my computer, accept the IP address is 10.0.1.5, whereas on the computer it is 10.0.1.4. Otherwise, everything looks the same.
Is there anything else I need to do to check these settings?
Thank you for your assistance.

Can't access ssl pages

Similar Messages

Maybe you are looking for