Can't access the console - Authentication failed

Hi,
I've just finished with DS and AM setup (consecutively).
The AM setup was done with Configure Now JES wizard, with Webserver, everything on the same machine - remote doesn't work. Everything fine.
When I try to access the console, I always get the message:
"Authentication failed.
Return to Login page"
I've tried admin, amldapuser, amadmin, amAdmin.
The logs in Directory Server says:
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - SRCH base="dc=caverna,dc=net" scope=2 filter="(uid=amadmin)" attrs="dn uid"
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - RESULT err=0 tag=101 entries=0 etime=0
amAuthentication.access:
"2006-11-01 02:47:25" "Login Success|module_instance|Application" Application AUTHENTICATION-105 dc=caverna,dc=net 31329a31876dc65001 INFO "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available" "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available"
and amAuthentication.error:
"2006-11-01 02:50:44" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
"2006-11-01 02:50:52" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
Any suggestions?
Best regards,
Luiz Felipe.

I can't remember very well, but I think I reinstalled AM and DS, But I can't remember very well.
BTW, I'm gently answering your question suggesting this tip, but I've gave up about JES. So, don't trust me a lot ;)
Maybe I will try the 2006 version... maybe.
Message was edited by:
luizfox

Similar Messages

  • I can not access the console reports the ESSO

    I configured the console reports the ESSO but I can not access, I set the permissions on the database to access and still can not access, can someone tell me how to do these steps.
    ----------------------------------ERROR------------------------------------
    [Async_ExceptionOccurred]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.0.50524.0&File=System.dll&Key=Async_ExceptionOccurred
    at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
    at Reporting.PLXReportService.LogonCompletedEventArgs.get_Result()
    at Reporting.ReportService.logonCallback(Object sender, LogonCompletedEventArgs e)
    at Reporting.PLXReportService.PLXReportServiceClient.OnLogonCompleted(Object state)
    Thanks.
    Edited by: JLK on Oct 4, 2011 1:48 PM

    Hi
    U need to login to the reporting web console with a local SQL user account. Will not work with a Windows domain account.
    Also need to ensure steps in Pg 10 of DBConfig guide is completed to enable "local system" account to access db.

  • I can not access the switch through the console (solved)

    Hello,
    I'm having a problem.
    I can not access the switch through the console. The web interface is working properly.
    Model: SRW224g4
    Below some pictures.
    The HyperTerminal settings
    error:
    If anyone can help me?
    Thank you and excuse the bad English.

    Hello Rumenigue,
    It looks to me like you are using a console cable.  The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself. 
    Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
    So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
    Hope I have helped,
    Christopher Ebert
    Network Support Engineer - Cisco Small Business Support Center

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • I have my iCloud backed up to a college email account that is no longer active.  I can't access the password information to reset/change it!

    I have my iCloud backed up to a college email account that is no longer active.  I can't access the password information to reset/change it!

    If you know the answers to your security questions for the account, you can reset the password without using email authentication by following the steps in the first section of this article: http://support.apple.com/kb/HT5787.  If you don't, you'll need to contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Can't access the zGesture Bester,zSensor view,zStart KITL and zSysteminfo in my lg-c900 windows 7 phone by AT&T

    I tried to update my phone but i got an error twice so i stopped the process,since that day i can't access the stated apps above instead the phone turns off while the keypad light is on please help
    phone model lg lg-c900
    AT&T wireless
    OS version 7.0.7403.0
    windows 7 phone

    If those Apps exist on your phone it means that you own a phone that was provisioned for provider testing and which should not have been sold. This is likely the cause for the inability to update it.
    Without an updated version the phone won't be able to access the store at all. Developer unlocking of 7.x phones is also no longer possible since the start of 2015.
    You might be able to get the Apps working again by resetting the phone to factory defaults (thereby losing all data) although given that it has failed updates it might also brick the device - there's not really a way to tell.
    This forum also isn't really concerned with end user questions - it deals with questions on Third Party App development - so I doubt anyone here can give you more specific help with fixing that issue.

  • My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • JAAS: How can I access the JAAS subject in an EJB?

    Hello,
    I try to understand the JAAS integration in J2EE 1.3.
    I know:
    J2EE defines a role-based container managed authorization for the web and ejb container. Roles, users and their relationship are defined in the realm.
    JAAS has a more sophisticated policy-based authorisation model. Since J2EE1.3 I can define a realm using JAAS having the role-based authorization of the container managed security.
    My question:
    How can I access the JAAS subject object in an EJB or servlet to use the policy-based authorization?
    Thank you for your answers
    Peter

    May be I should redefine my question:
    If I use JAAS as J2EE-Realm, how can I receive the subject?
    All JAAS-Tutorials contains code fragments like
    LoginContext lc = new LoginContext("entryFoo");
        try {
            // authenticate the Subject
            lc.login();
            System.out.println("authentication successful");
            // get the authenticated Subject
            Subject subject = lc.getSubject();But if I use JAAS as J2EE-Realm the container creates the LoginContext.
    Whom can I ask for the subject now?
    There is no such method implemented in the EJBContext, the HttpServlet or HttpServletRequest!
    Peter

  • Getting the error "Authentication failed."

    Hi,
    I am getting the error +"Authentication failed. If problem persists, please contact the system administrator"+ while login to OEM12c grid console as sysman user.
    I thought it was sysman password related and set the new password at DB level and OMS level too.
    Changed the SYSMAN user password at DB level as: alter user sysman identified by qmpzla102;
    Changed the SYSMAN user password at Grid level (OMS level) as: emctl config oms -store_repos_details -repos_host ushdc8951.us.deloitte.com -repos_port 1521 -repos_sid OER -repos_user SYSMAN -repos_pwd qmpzla102
    Though I am getting the same error while login to the OEM console.
    Please help me in getting the solution.
    Thanks,
    Mahipal

    Similar thread
    Error while login to 12c R2 OEM grid

  • I have enabled cookies, but I still can't access the website. HELP!

    I have enabled cookies, but I still can't access the website. I keep getting a pop up asking me to enable cookies. How do I fix this?? See screenshots. HELP!!!

    See also:
    *http://kb.mozillazine.org/Websites_report_cookies_are_disabled
    Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
    You can also check if DOM Storage is enabled.
    *http://kb.mozillazine.org/dom.storage.enabled
    You can check to make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
    *https://support.mozilla.org/kb/Private+Browsing
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    You can also try to crop images and only keep the relevant part(s) and possibly save them with a higher compression value.

  • I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!

    I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!
    I've disabled the firewalls, the virus protection, the application protection - nothing helps.

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • Can not access the Instance Data of a Singleton class from MBean

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

  • Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

    Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • How can I access the Attribute Values from the Search Region

    Hi all,
    I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
    I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
    Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
    I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
    Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
    If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
    SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
    I don't know how can I access the data from the Search Region.
    Please Help.
    Regards,
    Ranjith

    you could access the parameters entered in search region by the user as follows:
    You can get handle to the value entered by the user using queryListener method in af:query.
    You can intercept the values entered as described
    public void onQueryList(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
    for ( Criterion c : searchList) {
    if (c instanceof AttributeCriterion ) {
    AttributeCriterion a = (AttributeCriterion) c;
    a.getValues();
    for ( Object o : a.getValues()){
    System.out.println(o.toString());
    //call default Query Event
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    public void onQueryTable(QueryEvent queryEvent) {
    // The generated QueryListener replaced by this method
    //#{bindings.ImplicitViewCriteriaQuery.processQuery}
    QueryDescriptor qdes = queryEvent.getDescriptor();
    //get the name of the QueryCriteria
    System.out.println("NAME "+qdes.getName());
    invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
    private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
    FacesContext fctx = FacesContext.getCurrentInstance();
    ELContext elctx = fctx.getELContext();
    ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
    MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
    me.invoke(elctx, new Object[]{queryEvent});
    Thanks,
    Navaneeth

Maybe you are looking for