Can;t access Touchpad Settings - Just installed Windows 10 Pro

I just installed Windows 10 Pro and can't access my touchpad settings to get the scolling feature back.  A short while ago, when I connected my basic Microsoft mouse, the system did install a new driver for the mouse - could this be the problem? Or is it Windows 10?  Thanks for any help you can give. Toshiba Laptop Satellite C55-B
Windows 10 ProTouchpad Driver : 19.0.16.3 7/21/2015 SynapticsMouse Driver: Microsoft 9.5.172.0

I had the same problem. The settings would crash. The synaptics driver update fixed that for me. However after adjusting some settings a new problem emerged. Three Finger Gestures have changed from the default Windows 10 ones to the old Synaptics gestures. There doesn't seem to be a way to change it back. I think the Synaptics driver needs another update.

Similar Messages

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • Just installed windows 7 on my macbook (os x snow leopard) using bootcamp.  I can't get back to my mac now.  I've tried logging off of windows and shutting it down.  when i restart it comes back on in windows.  How do I get back to my os x?

    Just installed windows 7 on my macbook (Mac OS X Snow Leopard) using bootcamp.  Windows 7 works great, but I can't get back to my Snow Leopard.  When I log off or shut down Windows and try to start up again, all I get is Windows.  How do I get back to my mac operating system?

    If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
    If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

  • Just installed windows 8.1. when I try to access contacts in outlook get "the set of folders cannot be opened."  Did not have problem in 8.0

    I just installed windows 8.1 on my pc.  When I try to access iclod contacts in outlook I get a message " the set of folders cannot opened". What to do?

    Hi,
    Please create a new Outlook profile to check whether the issue persists:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • Can I just install windows 7

    I have a new lenovo laptop installed with windows 8 (I don't have the model number), sold in the US. I have a completely  legitimate windows 7 disc (sold in the UK).  Can I just install windows 7, assuming I don't care about windows 8 (I have no interest in dual booting, and have no data on the laptop)?
    Speculation about legal issues not required.

     Yes, just turn off secureboot in the BIOS. Windows 7 will not boot on a new windows 8 machine that has secureboot on.
    nothing legal to speculate on, as you bought a retail DVD.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • How to access BIOS settings in Bootcamp Windows 7?

    I need to reset the BIOS boot order in my Bootcamp partition to boot first from a DVD/CD, such as a Windows 7 repair disk.  What are the steps to get there?

    There is no BIOS, so you can't access the settings.

  • I can't access iTunes store on my Windows desktop since yesterday.

    I got a new Windows 7 allienware desktop this week, and I installed iTunes at the first time. I can access iTunes store via the software at the first day I installed, but I can't access iTunes store on my Windows desktop since yesterday. It always says there is a problem and I need to close iTunes when I try to access iTunes store. I tried to uninst all the related files of iTunes and reinstalled, but it still donesn't work. Now I can't download anything via my new desktop. What should I do to fix it?

    Looks like we are not alone...... Must be some problem with the software! Hope it can be solved soon!

  • Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

    Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
    Do anybody out there has an ideal of what to do to solve this issue.
    Thanks
    Pierre317

    Hi Pierre,
    more tips can be found here ...

  • Can't access print settings

    Hi.  Whenever I save a set of print settings for printing I can no longer access Print Settings again.  I searched the forum and found this response. This works but then the problem represents itself the next time I go to print.  It is rather tedious to reset all my preferences every time I want to print a document.
    Mac 10.6.8. I have the latest version of CS5 fully updated. Printing to an Epson 4800.
    Help appreciated.
    Steve
    9. Oct 8, 2011 11:40 AM (in response to lajeunefille) 
    Re: Can't access 'print settings' in Photoshop...
    gabevf wrote:
    It's a corrupted preferences file.
    What i got from another thread, is that you have to launch PS while holding down a certain combination of keys (i think it was shift+alt+cmd), and it'll reset your preferences.
    It worked like a charm.
    gabevf had the correct answer! I tried it and everything is working fine now!
    The combination is indeed shift+alt+cmd and then double-click on the Photoshop app icon.
    Greets!

    32 versus 64 doesn't make a difference.
    "I've seen similar issues on httP://feedback.photoshop.com You should maybe post there to report the bug."
    Thanks.  I searched there and found what might be a workaround. I think this is simply a bug in CS5. If (as indicated in posts revealed by searching the forum you linked me to) I temporarily change Printer Manages Color to Photoshop Manages Color in the PS window, I can then access Print Settings again to make changes, Save and then change Photoshop Manages Color back to Printer Manages Color.
    Go figure.
    Thanks a lot for the help.
    What I don't understand is why everyone isn't experiencing the same issue.

  • Just installed 7 pro, how can I import my bookmarks which I saved on a different drive?

    just installed windows 7 pro. I saved my bookmarks on a second drive but can not find how to import into my new copy of firefox. Why is this not an option when I go to import? Only option is IE.

    It depends on the format you saved the bookmarks in.
    If it was an HTML file see [[importing bookmarks from an HTML file]]
    If you used the JSON format to backup the bookmarks see [[backing up and restoring bookmarks]]. (Use the Restore - Choose file option)
    If you saved the places.sqlite file, you can place that file in your new [http://kb.mozillazine.org/Profile_folder_-_Firefox profile folder], replacing the file that is already there. This will replace the bookmarks and history with those from your previous version.

  • Can't access modem settings

    can't access modem settings, from safari,i after updating to mavericks,

    You need to put your dsl modem into bridge mode. Then enter your PPPoE settings into the router. You might have to powercycle (unplug power for 30seconds) your modem when connecting diifferent devices to it. You said that  you can't connect to the router @ 192.168.2.1 ?
    You can use this as a guide after you put the modem into bridge mode. 
    I don't work for Cisco. I'm just here to help.

  • My i phone is left somewhere,can i access my photo stream on windows pc

    My i phone is left somewhere,can i access my photo stream on windows pc.please help...

    Yes if you have Photo Stream enabled with your iCloud account settings on your PC.
    http://support.apple.com/kb/ht4486

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • How can i access security settings to stop PDF being copied?

    How can i access security settings to stop PDF being copied?
    I'm trying to secure my documents so others can not convert file to word or copy and paste information to edit

    Keep in mind (and Acrobat will alert you to this fact) that protections that you set in Acrobat are enforced by all Adobe products but the 3rd-party PDF Viewers may ignore them. There are even Web sites that will strip protections that you set in Acrobat. This is not a reliable technology these days. Acrobat keeps it mostly for backward compatibility for those users who use only Adobe Acrobat/Reader.

  • I just installed windows 8.1 and it wouldn't work

    What do I need to do to get iTunes to work again. Since I just installed Windows 8.1. This is stressing me out try to get it work. HELP!!!

    That's awesome wonder!
    Hey, I haven't experienced any problems with flash player square yet. Is it to "experimental" for the official repos? I've tested many flash sites and have yet to crash the browser. I think most users will not mind it in the official repos.

Maybe you are looking for