Can't access webacc on server public ip address

This is new server with a fresh SLES11sp2 OES11sp1 install with GW2012 sp2.
All is working well except even a local workstation cannot access webacc using the server public ip. Server is behind a router. Makes no difference if firewalls are on or off. Same issue from a remote workstation on another network, i.e., cannot connect to webacc using the test server's public ip from a browser. Just one nic in the server and one private ip.
FYI, same issue exists for imanager, i.e., no public ip address access even from a local workstation, so I am thinking it may be a SLES network card configuration issue, but that's just because I seem to remember under Netware 6.5 I had to make some inetcfg configurations to relay through the router. Router is an older Linksys WRT610N as this is just a test system for the time being.
I started an SR and they couldn't suggest any fixes other than to tinker with the router. I have both the to default values and open in the router's port forwarding section.
Ideas? Including switching to a newer router (I'm trying to keep it under $300.00) if you have any suggestions. This server will be for no more than 10 workstations local (mixed wireless and wired) and/or remote workstations for very trusted users.
Help Mr. Wizard!!!
thanks.
johnb

On 10/04/2013 16:26, jbeuhler wrote:
> The sp2 is not a typo. I had a SR with a GW2012 sp1 problem during
> install, encountering a "line173 error" involving a python subdirectory,
> even using the --text switch. The engineer (the SR went up) gave me the
> link to try sp2. It installed okay, still a little glitch but I figured
> out how to get around the line 173 error by installing all of the GW
> products one after another without configuring in between product
> installs and then going back to do the product configurations, instead
> of install, configure, etc for each product. The SR said the line 173
> install error is a known error but not currently under review for a
> fix.
>
> If you would pass this post on the beta reporting or send me that
> direction I would appreciate it.
>
>
> I am assuming from your response that my problem is not a recognized
> problem?
I wouldn't assume that but since you're running software that's not
publicly released I'd go back to your SR/contact with this issue.
HTH.
Simon
Novell Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Technology Transfer
Partner (TTP) program. See novell.com/ttp for more details.

Similar Messages

Can't access my Directory Server using the Console installed on a machine

can't access my Directory Server using the Console installed on a remote server, lookied into knowledge base article 4693, but still same any idea ?

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Can users access iPlanet Calendar Server 2.0 (iCS 2.0) from anywhere?

Can users access iPlanet Calendar Server 2.0 (iCS 2.x) from anywhere?
<P>
Regardless of whether you are a remote user, mobile user, or in the
office every day, you need access to your calendaring information anytime from
anywhere. iCS 2.x provides a personal calendar and event solution that can be
any device that includes a web browser. iCS 2.x works with other Alliance
solutions such as Sun Internet Mail Server and Netscape Messaging Server
software to ensure complete access to your calendar data regardless of location,
platform, or browser.

Hi,
Thank you for your suggestion. I have tried with your option also. Still I am getting the second time userid/password dialogue box.
Is there any other solution to avoid the second time user authentication dialogue box?
Do you want to see the ACL file?
Thanks & Regards,
Murthy

Can T3Client access the WebLogic Server Workspace.

Hi,
a couple of questions ....
Can the T3Client access the Weblogic Server Workspace ???
If so,how ???
The reason for this that I want to get access to the Weblogic Server Cache.
Is there any other way of getting access to the WebLogic Server Cache ???
Kindly let me know if you find the answer.
Thanks & regards,
Karan.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

How can i access mac mini server from iPad?

how can i access my files in mac mini server using an ipad2? what apps do i need?

Hi,
I found an App called iTeleport. Have a look.

Deploying Jira using Weblogic 10.3 - Can't access new jira server

I was able to install WL 10.3, create a new domain named, 'atlassian', and add a new server to that domain named 'jira'. I add a datasource to 'jira' then deployed jira via a .war to the new server. By default the new domains AdminServer comes up and is accessable via port 7001/console, but the managed server, jira requied that I start nodemanger before it would allow me to start 'jira' sever. Now, jira sever, datasource and app are all running, but I can not access via URL.
The Jira Server is running on port 7011, but I get a 404 when attempting to connect to http:\\<myserver>:7011 or http:\\<myserver>:7011\jira. Any ideas here are appreciated since Jira is not certified on 10.3, they aren't much help.
Edited by: user9952700 on Mar 25, 2009 3:54 PM

Atlassian has pretty good user forums, you might be able to get additional help there:
http://forums.atlassian.com/forum.jspa?forumID=46
Does the deployment screen show it has "Running". What does the deployment screen for the app show its context root as?
Also, why not just JIRA standalone? (it comes out of the box running in embedded tomcat).

Issues with Sydney server? Intermittently I can't access the Australian server

I can be working along on a number of my sites, all hosted on the Sydney server, when all of a sudden I can't access any front or back end of my sites, but at the same time I can get onto other non BC sites without and issue. When I try other BC partners sites on the Australian server they also dont work? this can last 10 15 mins and then they all work again! Can anyone shed some light on it please.

http://status.businesscatalyst.com/
I am not having any issues.

Domain Joined Workstations Can't Access Internet When Server is Off

I have two Windows 7 Ultimate workstations joined to a server running Server 2012 R2 Foundation. Whenever the Server is powered off the workstations can't access the internet via a web browser from neither a domain account nor a local
account, even though the network icon in the system tray indicates "Internet Access".
Is this a normal situation, or am I missing some settings? This is a big problem because there are times when the server will be off, but the workstations still need to be able to work in a web browser.
I'd be very grateful for a solution to this problem.
Capt. Dinosaur

Hi again SenneV, and thanks for the fast response; I wish the Dell community would get back even half that quickly.
"No i mean that after a while, the nla status icon on system tray will no longer state there is internet acces while there isn’t."
I was afraid that's what you meant, but I wanted to find out for sure.
"I would recommend doublechecking the bios and management ui for power options as I cannot imagine a server that would not be configurable to boot after power loss."
I couldn't imagine that either, but I've checked several time, and unless the setting is in Aramaic or mentioned in the Rosetta Stone, I couldn't find a setting for that. There is a setting for restarting after a crash,
but not just for a return after a power failure. I have the server on a battery backup so that it doesn't crash when a power failure occurs, but I can't even coax the server to restart after power is restored.
The server is a Dell PowerEdge T110 II, and it has BMC in the BIOS in which I've made all the necessary settings. Unfortunately BMC doesn't have a web GUI like IDRAC, and only (supposedly) responds to IPMI. However, I've not been able to get
that to work either. I've downloaded Intel's "ipmiutil" and installed it on one of the workstations and the server, but I can't get the utilities to work. I feel like I'm in the twilight zone.
I've posted questions on the Dell Community, but as yet (after almost a week) not a peep out of anyone there. I guess I'll have to contact Dell Tech Support.
Anyhoo, thank you for your help. I do appreciate it.
P. S. I tried logging into the workstations via LogMeIn while the server was shut down, and guess What! It worked. I was able to access both workstations even though the server wasn't running. Now, if I can just get IPMI/BMC to work,
my problem w/be solved.
Capt. Dinosaur

ApplicationLifeCycleListener can't access Runtime MBean Server

Hi all,
I have encountered quite a strange behaviour in Weblogic 9.0. I am actually trying to deploy an application originally developed on Weblogic 9.2 to Weblogic 9.0. Everything works fine, except the ApplicationLifeCycleListener. The Post Start method tries to register MBeans to the Runtime MBean Server and deregisteres them when the application stops in Pre Stop. In Weblogic 9.2, it works fine. I can access the MBean Server with a local connection as described here: [url http://e-docs.bea.com/wls/docs90/jmx/accessWLS.html#1119237]
The documentations on this for WL 9 and WL 9.2 do not differ significantly. Anyway, WL 9 quits any attempt to make local connections to the Runtime MBean Server with an Exception:
javax.naming.NameNotFoundException: While trying to look up comp/env/jmx/runtime in .; remaining name 'comp/env/jmx/runtime'
It works when I move the establishment of a connection into an EJB. I suppose that the ApplicationLifeCycleListener just can't see the Runtime MBean Server in Weblogic 9.0.
What do I do wrong? :-)
Thanks,
S?ren

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Can't access ex495 mediasmart server

My HP EX495 media smart server is runnng Windows Home Server. The device went off-line the other day and I could not connect to the device through ethernet nor USB. The nick has a solid green light and a flashing yellow lignt. My guess is it is sending out a signal but not receiving one. Any idea how to fix the problem? I've tried rebooting; sending WOL messages; reseating the drives; but still can not access it.
Any guidance would be apprciated. Thank you.

Try this? HP MediaSmart Server EX490 - Solution to LAN going offline at boot-up ‎05-18-2013 03:09 AM After swapping out a defective Netgear router, I started to experience problems with my MediaSmart server going offline immediately after boot-up. I could also see from the router stats that the EX490 established an Ethernet connection at 10Mbps when powered off, but not following boot-up. I could even use WOL to start the server, but it would drop the LAN connection shortly afterwards, without ever coming online. I tried various Cat-5 cables and 3 different routers, but I could not get the aqua LAN LED to stay on for more than about 30 seconds after boot. I could see the yellow LED on the RJ45 NIC port flash very occasionally, but that was about it. I managed to establish a PC to EX490 direct connection and so could get into the server via Remote Desktop, which again suggested there was nothing fundamentally wrong with the NIC port or cables. I tried upgrading the Realtec PCIe driver to no effect, checked there were no conflicting LAN addresses, DHCP services, etc., etc., and even considered doing a server rebuild. Eventually, I found a solution that works for me. Using the peer-to-peer LAN connection and Remote Desktop, go to the EX490 Device Manager, select the Realtek PCIe GBE Family Controller Properties, Advanced Tab and scroll down through the Property window to Speed and Duplex. Change Auto Negotiation to 100Mbps Full Duplex, save and reboot the server. It seems in my case that the EX490 is no longer coping with negotiating connection to a Gigabit LAN (still not sure why), but slowing the card down to 100Mbps is giving me a rock-solid connection. I hope this post will help others who may be contemplating using their MediaSmart as an expensive bookend or doorstop.

Can't access Software Update Server

I have 3 macs in my house, all connected to a wireless router. 2 of them have no problem using Software Update. The third returns the message:
"Software Update can't connect to the update server. Make sure you're connected to the internet, then try again."
I know that I am connected to the internet. Is there some setting, software firewall, that is preventing me from accessing the update server?

I even pulled my boot drive, installed it in an external firewire case, attached it to an iMac that has no problem with software update. Then I booted the iMac with the external drive and now it can't access SU from that drive. I deleted SU preferency from the Library, but it didn't work.

With Mountain Lion Server, can users access the Messages Server from outside your network?

I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
Thanks

If you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever.

Wireless bridge can't access windows certificate server

We have 10 Cisco 1200 wireless APs. The VLAN 1 use Windows certificate as authentication and VLAN 100 for the public. They work fine. We just bought two 1310 wireless bridges for outdoor use. We contact Cisco support for setup these two bridges. The wireless can receive the signal but can't logon. The IP is 169.254.x.x. The Certificate server receive Event ID 2 as below. The Cisco engineer can't make it work and he said the setup Windows IAS is not his expertise. Any suggestions how can we fix this issue?
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Date: 4/13/2007
Time: 7:41:21 PM
User: N/A
Computer: DEVICES
Description:
User blin was denied access.
Fully-Qualified-User-Name = chicagotech.net/Users/Bob Lin
NAS-IP-Address = 10.0.20.54
NAS-Identifier = Outdoor_1300_2
Called-Station-Identifier = <not present>
Calling-Station-Identifier = <not present>
Client-Friendly-Name = Root Bridge1
Client-IP-Address = 10.0.20.54
NAS-Port-Type = Async
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = All
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....

There are too many variables at play here, and too many unknowns...both on the server and client side...so it would be hard for anyone to offer suggestions other than the face you should talk to your system/network admins.

Can't access BI 11g server from local network.

I have a problem..
Hope someone can tell me the solution.
I've installed BI Publisher 11g in my server. From the server, I can access it via web browser with URL http://localhost:7001/xmlpserver/servlet/home
The problem is, when I try to access it from other PC in my local network with URL http://10.11.9.190:7001/xmlpserver/servlet/home, the page fail to show and there's connection timed out error.
I'm using Windows7 in my server.
Is there any configuration that I missed?
Thanks for helping me..

The best way around firewalls is to stream using port 80. This is a preference setting in QuickTime Streaming Server and QuickTime Broadcaster. This will allow the stream to pass through the hole in the firewall usually used for HTML (web page) traffic. HOWEVER, you cannot use this port if you are also running web server services (Apache) on the same computer/server since they need to use port 80 also. If you need to host a web site AND stream QuickTime using port 80, you will need two computers (or at least two IP addresses; one for each service which is a little tricky. If both services are trying to use port 80, weird things will happen, most often the HTML data will rule and the streams won't work. This has been my experience. Good luck!

[SOLVED] Can't access my home server from the outside

Hi all,
I have installed Arch on a Raspberry Pi and am trying to set up a home server. Right now, I am running a simple HTTP server (using node.js, if that matters) on port 8080. From my LAN, I can access the server all right.
From the outside, it seems that the traffic does actually reach the computer (I conclude this from the blinking diode indicating network traffic). However, all requests time out. Interestingly, if I kill the server while a request is pending, the timeout occurs right away.
I have no idea what is causing this. I have checked for iptables rules, but there seem to be none. What is blocking the traffic and how can I find out?
EDIT: Nevermind, I was testing incorrectly -- the traffic did reach the Raspberry Pi, but the return traffic did not reach my test computer because it was blocked by the router's firewall. Testing from TOR works just fine.
Last edited by MrAllan (2013-12-24 12:01:42)

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Can't access webacc on server public ip address

Similar Messages

Maybe you are looking for