Can't Access WVC200 with the Cisco Video Monitoring System

I have contacted the help desk but nothing is forthcoming.
I need help to configure a WVC200 to with the Cisco video monitoring system. In the camera configuration there is no drop down item for a Linksys wvc200 camera only the WVC210 camera. Thus access is not possible. With my other camera WVC 210 there is no problem. Who can help?
Also the Cisco video monitoring system cannot reduce in size (drag smwller) but only full screen or nothing.. how can I move the monitor to my other video screen.
Mike

Steven
I know it is not a bug and that WVC 200 is not supported anymore but I find that a lame excuse. I only bought this 18 months ago and now Cisco does not support this. If it had been 5 years ago then I could accept.
Why you can't add a wvc200 template in the Cisco video monitoring systemn I just do not know.
Even the latest WVC200 fireware is only released this year.
WVC200_EU_V1.2.2R00.bin
Release Date: 20/APR/2010
Size: 4096.00 KB (4194304 bytes
Mike

Similar Messages

Cisco Video Monitoring System won't connect

Hi,
I have two PVC-300 cameras and I'm using the Cisco Video Monitoring System. I installed the Monitoring System to my laptop and everything worked fine.
Now I'm tring to install it to our receptionist's laptop (with same config file) and it won't work. I've even re-installed Windows and still nothing. I can ping both cameras and I can even login to the web-based GUI, but I can't get the video feed to show from the Monitoring System. The Monitoring System's search finds both cameras, but won't show the video feed. It just keeps "Connecting..."
All the devices are on the same network/subnet. The cameras are on v.1.0.1.13 and Video Monitoring System on v.1.2.1. The laptop (Sony Vaio) runs WindowsXP SP3.
What to do, what to do?
-Petri

I feel like I just answered this question recently, lol
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9692/ps9944/ps9950/data_sheet_c78-508956.html
Take note of the section "Network".
RTP: http://en.wikipedia.org/wiki/Real-time_Transport_Protocol
The issue could be a couple different problems, but the most likely is that RTP traffic is not allowed by the firewall. Since they are on the same subnet it is most likely a software firewall. Like windows firewall.
Make sure the systems have windows firewall disabled and retry. If it works you can re-enable the windows firewall and then configure it properly. Here is a article that lists some information that may help you configure the firewall properly:
http://www.microsoft.com/windows/windowsmedia/forpros/serve/firewall.aspx
Much of that document is for windows media server, but windows media server uses the same ports and such as the camera. (thats from memory)

HT1338 Hi, I have accidently sent my iPhoto from the dock to the trash, can I get it back? I've searched the trash but can't find it, my photos are still in the computer, but I can't access them with the iPhoto icon in the dash.

Hi, I have accidently sent my iPhoto from the dock to the trash, can I get it back? I've searched the trash but can't find it, my photos are still in the computer, but I can't access them with the iPhoto icon in the dash.

See this,
I lost my Safari /other on the Dock! "poof" "?"

Forgot the password of Video Monitoring System

Hi There,
How can I change the password for the admin account of the Cisco Video Monitoring System? I have to hold a demo next week and I forgot the password and I cannot get in. I Tried to uninstall the software but still requires the same username password, it wont let me give new password during the installation.
Please advise!
Thanks,
Gergely

Hi Gergely,
We have heard of this happening before.
Yeah, if you dont see the login screen prompting you to set a PW, then there is one set.
1st time install looks like this...
So this means you probably need to reset the user account via registry, here is the steps and let me know if this can fix it:
(Always consult with your System Administrator if not famaliar with this).
Uninstall SWVMS SW. Then...
1.       Click Start, click Run, type regedit in the open box, and then click OK
2.       Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\NUUOIP\UserAccount
3.       Double click on file UserCount, and change value data box to 0, and then click OK
This should allow you to reinstall and reset password for access to SWVMS (NUUO under the covers).
I hope this helps.
Steve DiStefano
Systems Engineer
U.S. Field Channel Sales

Video Monitoring System

I have just downloaded the Cisco Video Monitoring System. The look and feel are GREAT! BUT... I cant seem to figure out how to make it work for me
I have 2 monitors i would like the Cisco Video Monitoring System on SCREEN #2 not Screen #1.. and there are no setting in the program to make this happen or at least i have not found one. I have tried to run the program with the argument -window and it does not seem to respond to that does anyone have a work around for this? to make this program work for me i must be able to work on screen 1 and have the cisco monitoring program on screen #2 Please help!!!!! ASAP

I am not 100% I understood the question so let me restate it to be sure.
You have a IP based video camera and you want to know if you can use a dynamic DNS service to remotely manage/view the camera.
As long as the video camera is IP based then the use of a dynamic DNS service to remotely access it is possible. In order to do this there are a couple critical steps to make sure happen.
1) Setup the camera so it can be accessed locally via a static IP
2) Configure your border router, for SMB this is usually the firewall, to forward the correct traffic to the camera. If you only have 1 global ip address then you may want to look at PAT aka NAT overloading. If you have multiple global ip adddress' then using 1 via NAT is probabally your best option. Make sure that when your doing this step you also create the access-list rules to allow the traffic to pass.
Now steps 1 and 2 is what you would normally do for any connection from outside the office. The next step is where dynamic DNS will come into play.
3) Setup your dynamic DNS entry. This step will vary from vendor to vendor but generally the people who use a Dynamic DNS service only have 1 Dynamic IP address. If this matches your situation then you can place the dynamic DNS client, or whatever the service uses to identify your current ip address, on a workstation or server that is using the same global ip as the camera. Normally this means anywhere, but if you have more than 1 dynamic global address then be aware of where it is going as you don't want the wrong ip populated for dynamic dns.
Now your done. You should be able to go to access it from your dynamic dns entry i.e. securitycam.dynamicdnsservice.com
Cisco is currently donating money to the Haiti earthquake appeal for every rating so please consider rating all helpful posts.

LINKSYS VIDEO MONITORING SYSTEM 2.0.2.1 SWVMS16

I have been using this software for quite sometime, very good, but my external HD failed and i had to get a replacement.
Unfortunately, when I tried to use the monitoring system again, it was asking for my password, which i forgot. I have uninstalled the software few time and tried to re install, but everytime it is asking for my password. Is there a way to re install the software and give another username and password. Or could i just delete the file that contains the username and password and re create a new one. thanks for your help

Hi Noelandre42,
Browse to Program Files\Cisco\Video Monitoring System. Look in that folder for RegEx.exe. If the file is there, open it and select Invalidate Password. This will allow you to use the default password: admin
If the RegEx.exe file is not in the folder, please call Small Business Support and ask for assistance. If the person you speak with is not sure where to get the file, please reference this post and I can assist.
You can find a support number at the following link: www.cisco.com/go/sbsc

. I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

Hello:
I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
Please Help
maxsdad

B-Rock:
Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
I was able to encode 5 full length music videos, but the results were distorted (video and audio).
I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
Thanks again for all your help.
maxsdad

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

I installed a new airport express and made it part of my existing home network... now the PCs can't access internet through the airport extreme or the cisco access points

Everything works perfect with Macs, iPhone, iPads but I have 2 pcs that now can't access internet. The PCs connect to the airport and my other access points but no internet- The PCs sent an error of DNS

Yes, as we already said, it will do all of this if you have a good wireless signal reaching the bedroom.
Remember that an extender or repeater or whatever you want to call it can only extend the quality of signal that it receives.
The Ethernet signal that the Express delivers will only be as good as the quality of the wireless connection between the AirPort Extreme and AirPort Express.
If you have doubts, make sure that you understand the store's return policy before you buy.

Can't access sites with video's on page

I can't access any site that has video's on page. like ESPN.com for example. Anyone have any idea why?

That video IS Flash, try Uninstalling what you have now and install Flash 9 Player again ...
To check what you have installed use this link, it should say "You have version 9,0,115,0 installed"
http://www.macromedia.com/software/flash/about/

A flash game was accidently blocked on a website, and now I can't access any of the flash games on it. Can that website be unblocked?

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
A flash game was accidentally blocked on the website http://www.oyunlar1.com Now I can't access any of the games there. Is there anyway to unblock the flash settings for that website?
== Troubleshooting information
==
Application Basics
Name Firefox
Version 3.6.7
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
1-ClickWeather 1.1.9.1 true
Adblock Plus 1.2.1 true
Adobe Contribute Toolbar 5.0 true {01A8CA0A-4C96-465b-A49B-65C46FAD54F9}
AIM Toolbar 5.96.5.1 true
Ask Toolbar for Firefox 2.1.0.5 true
BatchDownload 1.2.4 false [email protected]
Big Fish Games Toolbar 2.0.0 true {6847DFAE-037A-400c-A524-27F0A281B692}
CheckPlaces 2.2.2 false [email protected]
Cooliris 1.12.0.36949 true [email protected]
DownloadHelper 4.7.4 true
DownThemAll! 1.1.10 true
Fast Video Download (with SearchMenu) 3.1.1 true
Fast Youtube Downloader 1.2.2 true [email protected]
Firefox ImageGrabber 1.0.6 false {546d2a00-2bbf-11dc-8314-0800200c9a66}
Flashblock 1.5.13 false {3d7eb24f-2740-49df-8937-200b1cc08f8a}
FlashGot 1.2.1.27 true {19503e42-ca3c-4c27-b1e2-9cdb2170ee34}
FoxyProxy Standard 2.21.3 true [email protected]
Google Toolbar for Firefox 7.0.20100326W true {3112ca9c-de6d-4884-a869-9855de68056c}
Googlepedia 0.6.3 true {1ABADB6E-DC4B-11DA-9F70-791A9CD9513E}
HP Smart Web Printing 4.60 false [email protected]
ImageHost Grabber 1.6.4 true
InvisibleHand 2.4 true [email protected]
iWinGames Plugin 1.0 false {98e34367-8df7-42b4-837b-20b892ff0847}
Java Console 6.0.07 true
Java Console 6.0.04 true
Java Console 6.0.10 true
Java Console 6.0.12 true
Java Console 6.0.13 true
Java Console 6.0.14 true
Java Console 6.0.15 true
Java Console 6.0.17 true
Java Console 6.0.16 true
Java Console 6.0.19 true
Java Console 6.0.20 true
Java Quick Starter 1.0 true [email protected]
MegaUpload DownloadHelper 1.0.2 true [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
MSN Toolbar 4.0 false [email protected]
myBabylon English Toolbar 2.6.0.15 true
myibay Firefox extension 1.1.7 true [email protected]
NoScript 1.10 false {73a6fe31-595d-460b-a920-fcc0f8843232}
Ookong 1.5 true {95969329-aa35-473a-b537-3f6f62c0ba23}
Rapidlibrary Search ToolBar 1.0.0 true {2832ABCD-4444-1012-2D45-132D5447C445}
RapidShare DownloadHelper 1.0 false [email protected]
RDown - Rapidshare Downloader 0.6.0 true dave2x@download
Remove It Permanently 1.0.6.7 true {1dbc4a33-ea62-4330-966c-7bdad3455322}
RSFind! 1.1.2 false [email protected]
Search Helper Extension 1.0 true {27182e60-b5f3-411c-b545-b44205977502}
Shareaholic 1.9.9.5 true [email protected]
SkipScreen 0.4.12s false SkipScreen@SkipScreen
Skype extension for Firefox 2.2.0.102 false
Status-bar Scientific Calculator 4.9.2 true ststusscicalc@sunny
StumbleUpon 3.64 true
The Browser Highlighter 1.0.19126 false [email protected]
UnPlug 2.026 true unplug@compunach
Xmarks 3.7.9 true [email protected]
Yahoo! Toolbar 2.1.3.20100310105313 true {635abd67-4fe9-1b23-4f01-e679fa7484c1}
Adobe DLM (powered by getPlus(R)) 1.6.2.63 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.fixup.alternate.enabled false
browser.history_expire_days.mirror 180
browser.places.smartBookmarksVersion 2
browser.startup.homepage http://www.refdesk.com/
browser.startup.homepage_override.mstone rv:1.9.2.7
extensions.lastAppVersion 3.6.7
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729; .NET4.0E)
javascript.options.showInConsole true
keyword.URL http://slirsredirect.search.aol.com/slirs_http/sredir?sredir=2706&invocationType=tb50-ff-aim-ab-en-us&query=
network.protocol-handler.warn-external.aim false
network.protocol-handler.warn-external.dnupdate false
places.last_vacuum 1279652142
privacy.sanitize.migrateFx3Prefs true
security.warn_viewing_mixed false
== Firefox version
==
3.6.7
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.7) Gecko/20100713 Firefox/3.6.7 GTB7.0 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Cooliris embedded in a tab
*getplusplusadobe16263
*np-mswmp
*Contribute Firefox IBE Plugin DLL
*6.0.12.69
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*1.9.0009.1
*npdnu
*npdnupdater2
*NPTURNMED
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
*Default Plug-in
*Shockwave Flash 10.1 r53
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Delivery Network Acceleration by BitTorrent™
*GEPlugin
*Picasa plugin
*4.0.50524.0
*MSN® Toolbar
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Java(TM) Platform SE binary
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Thanks, Eric. I'm not sure what I should be checking using your suggestion--as I said, I'm an utter novice with the iMac. However, I saw a reference to problems with the Library entries, so I checked mine and the iWork files were missing, something confirmed when I checked the crash log. In desperation, I did another software update, and that seems to have fixed the problem completely. Now wondering if I dare upgrade to Lion!

HT201335 Can i use airplay with the apple tv and airport express without an internet connection? Basically Set it up as a closed network?

I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
No internet connection is available at the location.
Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
I know I can do this wired with the HDMI adapter but would like to do it wireless.
Thanks for any help!

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

Making a VoIP call with the Cisco 837 ADSL router

I would greatly appreciate if could please provide some technical assistance to my questions below:
Is it possible to make a VoIP call between two 837 ADSL Cisco routers over a 1Mbps ADSL broadband connection?
If so, can I configure this VoIP connection using either a PPPoE or ATM WAN link?
Is it possible to make a VoIP call using a Cisco 837 Router while simultaneously surfing the Internet? In other words do I need two public IP addresses i.e. one for accessing the internet and one for making the VoIP call or is one static IP address obtained from my ISP sufficent.
It is possible to configure QoS parameters (e.g. RSVP, Voice precedence, Voice codec selection) on this 837 router using PPoE or can it only be done using an ATM WAN interface?
Does the Cisco 837 router support both the H.323 and SIP communication protocols? Do I need to purchase a certain IOS operating system version for VoIP calling?
Does the VoIP dial peers need to be configured with both a POTS and VoIP phone numbers or is only one number required?
Do I need to obtain a special VoIP number from my VoIP service provider? or can I use existing POTS numbers or made up numbers within the dial peers as this situation involves making a private VoIP call between two branch offices using 837 ADSL routers and not via a VoIP service provider.
Finally, can I use POTS ordinary telephones with the Cisco 837 for making VoIP calls or do I strictly need to purchase VoIP phones?
My apologies for the number of questions asked here but I currently need to know the technical ability of the Cisco ADSL 837 as I am thinking of employing these routers in my company organisation.
I await your feedback in due course.
Thanks,
Martin Healy

Hi,
I give you a sample config of my router.
class-map voice
match access-group 101
policy-map mypolicy
class voice
priority 128
class class-default
fair-queue 16
ip subnet-zero
gateway
interface Ethernet0
ip address 20.20.20.20 255.255.255.0
no ip directed-broadcast (default)
ip route-cache policy
ip policy route-map data
interface ATM0
ip address 10.10.10.20 255.255.255.0
no ip directed-broadcast (default)
no atm ilmi-keepalive (default)
pvc 1/40
service-policy output mypolicy
protocol ip 10.10.10.36 broadcast
vbr-nrt 640 600 4
! 640 is the maximum upstream rate of ADSL
encapsulation aal5snap
bundle-enable
h323-gateway voip interface
h323-gateway voip id gk-twister ipaddr 172.17.1.1 1719
h323-gateway voip h323-id gw-820
h323-gateway voip tech-prefix 1#
router eigrp 100
network 10.0.0.0
network 20.0.0.0
ip classless (default)
no ip http server
access-list 101 permit ip any any precedence critical
route-map data permit 10
set ip precedence routine
line con 0
exec-timeout 0 0
transport input none
stopbits 1
line vty 0 4
login
voice-port 1
local-alerting
timeouts call-disconnect 0
voice-port 2
local-alerting
timeouts call-disconnect 0
voice-port 3
local-alerting
timeouts call-disconnect 0
voice-port 4
local-alerting
timeouts call-disconnect 0
dial-peer voice 10 voip
destination-pattern ........
ip precedence 5
session target ras
dial-peer voice 1 pots
destination-pattern 5258111
port 1
dial-peer voice 2 pots
destination-pattern 5258222
port 2
dial-peer voice 3 pots
destination-pattern 5258333
port 3
dial-peer voice 4 pots
destination-pattern 5258444
port 4
end

I enrolled in weight watchers online only to find out I can't access some of the options because I need adobe flash player is there anything I can do?

I enrolled in weight watchers online only to find out that I can't access some of the tools I need because I need adobe flash player is there anything I can do. I've already paid for the service!!!!

Send a stiff email to Weight Watchers to suggest they need to remove their software videos from the FAT and BLOATED Flash container and trim down to HTML5 in the future if they want to stay on program.
In the mean time you are going to have to employ work arrounds with your iPad.
Try the Skyfire browser app, This can convert some flash content remotely into a viewable format playable by Quicktime on your iPad.
Its not however guaranteed to work on DRM protected material and its very likely these Weight Watchers videos are so protected I am afraid to say.
Other apps such as iSwiffer attempt streaming of flash but are slowed due to band width.
You could also use a VNC type app such a Splashtop to stream direct from your PC to your IPad however sound is not guarranted to work with these apps.
Finally the most satisfactory solution at the moment plunk yourself down in front of a PC/Mac or Linux box and watch the flash their.

Can't Access WVC200 with the Cisco Video Monitoring System

Similar Messages

Maybe you are looking for