Can't activate after system restore and reinstall

I recently installed adobe acrobat pro on my laptop, everything was working perfectly until I faced another unrelated issue that meant I needed to perform a system restore to a point before I had installed adobe acrobat.
After the system restore obviously my registry had been rolled back quite a bit and so I needed to reinstall acrobat. After reinstallation (downloaded the installer from the acrobat site on my acrobat.com account and let it install the same as last time) when I launch acrobat I get an error that my acrobat subscription cannot be validated.
This is the only PC I have installed acrobat on so it doesn't seem to make sense, even if it considered this to be a new installation then it should at least activate as my second installation.
Any advice would be much appreciated.

I am not familiar with the limitations on the subscription set, but you may have to contact Adobe and explain the issue. It may be they have to reset your activation or whatever is done with the subscription. Typically when you start, you would be asked to provide your ID that you used to purchase Acrobat.

Similar Messages

  • After system restore i reinstalled firefox, how to get back bookmarks etc with old firefox data?

    After system restore the only thing i have is old firefox data on desktop if all bookmarks, passwords are recovered it will be great help.
    P.S
    i reinstall firefox from drive other than c ,that was in downloaded form.
    Thanks

    The "Old Firefox Data" folder on the desktop has been created as the consequence of resetting Firefox.
    Doing a Session Restore may have reverted the profiles.ini file to a previous version that hasn't registered the new profile folder that a reset had created, so you may need to check for this.
    * C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\
    The "Application Data" folder in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    If you have a profile folder that is more recent than the "Old Firefox Data" on the desktop then you can use edit the profiles.ini file and change the path of the currently default profile to the name of the profile folder as you find in Document and Settings.
    *http://kb.mozillazine.org/Recovering_a_missing_profile
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    It is always best to be cautious with using System Restore as this can cause some file to be replaced with older copies, i.e. your Firefox installation and profile folder can get inconsistent and you may have to reinstall Firefox as well.

  • Office 2013 Pro from O365 can't activate after a restore from backup

    Office 2013 downloaded from O365 account and activated on windows 7 pro computer.
    After a virus, restored computer from full system backup from 3 weeks prior using Storage server essentials server computer backup.
    Everything (Adobe, W7) else is fully intact but the Office 2013 install warns about activation.
    The problem is that the activation window has activate by phone disabled and the internet activation is not working.
    Was looking for any suggestions before I uninstall and reinstall office 2013.
    TIA
    Glenn
    GB

    Hi,
    If you are using Office 365, can you just activate it using your Office 365 account?
    In any Office application, go to FILE -> Office Account -> type in your Office 365 account and password, try if this helps fix the problem.
    If you are using Office 2013, is it a volume license edition? Or you are using a product key?
    I'd like to know what error it prompts when the internet activation is not working, it helps to determine the cause.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I have dloaded and reloaded firefox 7 b4 i had firefox 5 now after system restore and proxy setting changes an d default settings fire fox still will not open what am i doin wrong

    ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

    ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

  • Audit Issue in QA after system restore and client copy

    Hi Experts,
    We have an audit issue and need your advise on that.
    Our QA system was audited and auditors were looking for the approval tickets on which a user was created. I found that several users that were not created in QA and do not even exist in QA have their change logs in QA showing that user was created.
    I researched it and found the steps that Basis and DBA's do when creating a new QA client.
    1. Basis export user master and authorizations using SAP_USER profile from the target QA environment.
    2. Then DBA's restore the QA Environment from the Production Backup.
    3. Basis import back the preserved User master and roles using SAP_USER profile.
    But when reading about this profile, I came to understand that change documents ( USH* ) tables are not exported and imported back. So that is why we have change logs in our QA from Production system.
    So my question is how to solve this issue, where Auditors look at the change documents in QA and ask for the documentation though in reality these change documents are coming from Production. Should we ask for DBA team to truncate USH tables or is there a client copy profile that saves the change logs that we can export and import back.

    Hi,
    as you know the USH* tables belong to delivery class L. The tables in this class are never copied during client copy but you don't do client copy. Idea of deleting records from L tables after backup restore does not sound good because you will loose all data. As a workaround you could backup content of tables with delivery class L, export users SAP_USER, restore production backup, import users and import backup for tables with delivery class L. There is around 5000 L tables in ECC. Another approach could be to restore production on different box and do proper client copy to QA system.
    Cheers

  • Data recovery after system restore and corrupt user account.

    A few months ago I was in the middle of a school assignment and my HP laptop started acting strange. I would try to move an image and a copy of it would remain in its place. I couldn't delete the picture either, but I could "cut" the image. Well,
    I ended up restarting the computer and when I logged on it logged me into a temporary account because my account failed to log on. Not knowing exactly what was going on or what to do we ended up doing a system restore like a dummy and restarted the computer.
    Well, when I logged back in everything was gone, all my school stuff was gone. What do I do can I get these back without having to pay a lot of money to do so? I am a single mother of two and there is no way I can afford anything.

    I'm assuming that, since this post is 2 years old, rachbutterfly81 has already moved on with her life. But, since this is the second time I've run into this problem, and this is the first time I've found a solution that worked, I thought I would add my two
    cents. Of course I do agree that the original response was a little heavy for a mother of two, but it did work for me (with some slight variation that I will get to).
    I definitely disagree with Mr. Malotte's statement that all her files were deleted by the system restore. She was obviously logged in under a temporary account, and so all her original files were fine and stored under the same location they always were.
    There was no need for her to purchase additional software to "recover" her files when they were all there under her original account name. All she would have had to do to find her files (assuming she was running Windows Vista or 7) was to open her "C:" drive
    and navigate to the "C:\Users\" directory and look for the folder with her account name.
    Anyway, the first solution worked for me, BUT there is absolutely no reason to delete the original account folder as Magon suggests in step 3!
    Simply rename it. Once you finish step 5 and delete the original registry key (I recommend backing it up by right clicking on the key and selecting export), there is no reason to reboot your machine. There are some additional steps to make
    life a little easier though. I've added them to a modified version of the original:
    1. If you know you have another administrative account you can use, go ahead and restart your PC to release the locks on your profile. If you don't have another account to use, you can create one by going to "Add or remove user accounts" in the control panel.
    Select "Create a new account," name it whatever you want, check the Administrator box, and click "Create Account" (you may want to consider adding a password to this account as well). Now you can restart.
    2. Log on with another administrative account
    3. Rename your original profile to something different. For the sake of simplicity, we'll pretend it was called "myaccount." So, you would rename "C:\Users\myaccount" to "C:\Users\myaccount.original." It really doesn't matter what you name it, so long as it
    is different than it was and you can still find it again.
    4. Delete C:\Users\TEMP
    5. Delete the registry key matching your SID from
    "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\ProfileList". Check the value "ProfileImagePath" to make sure you pick your own profile.
    6. Log off and then log into your original account. Everything will still look messed up, like before, but it will not warn you that you are logged in under a temporary account.
    7.While logged in, navigate to your user directory (not C:\Users\myaccount.original, but the current one you are logged in under, C:\Users\myaccount) and copy any files you see that say "ntuser" in them into your original profile directory (C:\Users\myaccount.original).
    Most likely, you won't be able to see any, so you will need show hidden files. Hit
    Alt on your keyboard, and you should see the menu bar appear. Select "Tools" and then "Folder Options". Select the "View" tab, and under "Hidden files and folders" check the option to "Show hidden files, folders, and drives." While you are
    at it, uncheck the box next to "Hide protected operating system files."
    8.Once you've copied the files over, go ahead and log out. You will need to log into your other administrative account once more.
    9.Rename the new account (or delete it if you want), and rename your original account back to what it was (so "C\Users\myaccount.original" will be renamed to "C:\Users\myaccount").
    10. Log out and now log in using your original account. Some things may not work as they originally did (for instance, I had to log into dropbox again and go through the setup process), but most things will. Most importantly, all your files should still
    be there.

  • I can only print first 80 or so pages after I download firefox - if I do a system restore and uninstall firefox, the problem goes away... until I download firefox again and then I again can only print the first 80 or so pages - even if I am using IE!

    This began when business increased in January and our print jobs got big (printing invoices off the internet). It can print any small job no problem but if it's over 80 or so pages, it will stop and show a spooling error. I have done system restores and uninstalled firefox and then Internet Explorer will print the big jobs UNTIL I REINSTALL FIREFOX. Then the problem resurfaces whether using firefox or IE!!! Why?! I don't care why - how do I fix it? All 13 other computers use firefox and that is how my staff is trained. I hate IE.

    -> '''Is my Firefox problem a result of MALWARE ??'''
    * Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
    -> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
    * Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
    * SuperAntispyware - http://www.superantispyware.com/
    * Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
    * Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
    Check and tell if its working.

  • After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

    after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
    Cont-8096688758

    hi Jain,
    you may need to check the transfer structures,
    right click infosource and 'change', click 'comm.structure'/expand,
    click 'transfer', move the 0BASE_UOM from left to right side,
    or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
    hope this helps.

  • How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    Hi,
    You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
    If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
    Here are the links that will guide you through the process:
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Performing an HP System Recovery (Windows 7)
    Order USB Recovery
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • After removing system fonts and reinstalling fonts, FireFox will not start

    After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
    == This happened ==
    Every time Firefox opened
    == After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

    The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
    The file names will begin with '''bp-'''
    There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
    One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
    See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
    To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

  • I have uploaded an old itunes library by mistake - any way that I can go back to my previous library.  Unable to do a system restore and I don't know where to find an up to date music/playlist file.

    I have uploaded an old itunes library by mistake - any way that I can go back to my previous library.  Unable to do a system restore and I don't know where to find an up to date music/playlist file.  I was originally trying to recover a playlist that vanished after I had updated one of the ipads, did an online search, followed the instructions only to discover that I had loaded an itunes library from 2 years ago.  Stupidly I thought that it had updated itself and didn't realise I had to do it.  Any he

    See Empty/corrupt iTunes library after upgrade/crash. Hopefully you have a more recent library file that you can restore.
    tt2

  • I accidentally deleted QuickTime from my computer. Then I did a system restore and retrieved it. Now Itunes can't find QuickTime and will not open. Is there a fix for this without my Ipod?

    I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
    Thank You
    T-BILL

    Hmmm. There's a couple of things that might be going on with that one.
    Let's try an uninstall and reinstall of QuickTime first.
    If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
    If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
    You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
    http://support.apple.com/kb/DL837
    Does your iTunes launch properly now?

  • After system restore to back up have lost texts, photos and app data

    Speakers not working on iphone all of a sudden and volume switches not working (just the volume comes up but no bars at the bottom).  So did system restore and more problems.
    After I did this restore (to my backup done today) to my iphone 4s, I now have no text messages on my phone, no photos and no data on my nike running app (6months of records of runs).  Have searched through these forums and still stuck.
    I think I'm going to have to take my iphone somewhere for the speaker issue, but have no idea where as optus sent it out to me directly via mai l(Adelaide, Australia).  
    In the meantime, I really want my texts, photos and app data back on my phone.
    any help HUGELY appreciated..

    thanks for your reply.  I am trying the restore again now.
    But no, I still have no sound, so it was all for naught.  Its fine if I have headphones in, and fine if its in a dock or connected to bluetooth, the phone also rings and I can hear people on the phone:  the only sound that doesnt work is music playing through the speaker, and video.  Also when I press the volume up and down buttons, nothing works.  I suspect there is something wrong with the docking connection as far as I can see from other peoples questions on here.
    But the loss of texts and app data is just the icing on the cake

  • Is iphone activation server down? can't activate after restore..

    is iphone activation server down? can't activate after restore..

    No not yet. Still trying. Please tell mé if you Solve it :)

  • After i update to 36.0.1 my mac becomes extrimly slow. Can i uninstall 36.0.1 and reinstall 35.0.0?

    I use firefox since long. I update to new versions regularly on my mac os x 10.8 . After i update firefox from 35 to 36 and than 36.0.1 my mac becomes net turned very very slow. I need to go back to version 35.
    i clean my mac , check internet connections , all r ok.
    how can i uninstall 36.0.1 and reinstall 35
    ur support will be appreciated.
    thanks
    mayank rathod
    dubai , uae

    You can create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Maybe you are looking for

  • Error in mapping or source ?

    Hello Experts, I hope you can help me with following issue ... I trying to set-up an file to idoc scenario using file content conversion but I have an issue in my mapping and I know what is missing but don't know how to fix it... My source xml is mis

  • How do I place on ID a halftone image made in PS and keep the halftone?

    I'm really not finding anything about this, so i'm starting to think I can't do it. I'm using CS5. Here it goes: I'm making a magazine layout as a college excercise. I want to use halftone images in one or two ink (some only black, others only cyan,

  • Use of XMLTYPE is bpel

    Hi All, I have a requirement in which I am polling a table through DB Adapter which has xmltype column in it.After polling, I want to enrich the xml type column through some operations in BPEL.But when I look the xmltype column in bpel input variable

  • Mini BASIS Installation from the Book ABAP Objects by KELLER & Kruger

    Hello People I have installed the Minibasis CD's and both One by one KERNEL and the DATA. My system description is as follows: Intel P4  CPU 2.4 Ghz 256 MB RAM Microsoft XP Profssional Version 2002 Service Pack 1 Operating system's drive is NTFS syst

  • PAragraph Direction Selection Option is missing in CS6

    Hello, I just downloaded CS6 specifically to do some testing on our Arabic fonts. Even thought I have selected the Adobe World Composer option, I do not have the option that lets me choose the paragraph direction like Adobe's website document shows: