Can't activate my iphone, I connected to wifi and can't reach the activating system
I connect the iphone to wi-fi and get a message that says that Iphone can't reach the activationg system, please help!!!!this happens after I restore the Iphone
Was your phone ever locked to a different phone carrier?
Similar Messages
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung. I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S. How do I switch the 4 to her number once I make the switch to a new 4S?
Just call yur provider and they will set it up with you.
This is what I do, when I get a new iphone and give mine to my wife. -
How can we reset the active system status when we are trying to change
Hello SAP,
I am using the transaction code 'CJ20N' .
For this transaction code, I need to put one validation when user is trying to change the system status to 'TECO'.
Once, user changed the system status and trying to save , we need to put the previous system status.
For e.g. : system status is 'REL'. Now user set to 'TECO' and CLICK on save button, system status need to change 'REL'.
Could you please explain me that how can we delete the buffer system status 'TECO' and reset to active status 'TECO '.
Thanks and Regards
SriniYou can't delete an account, you can only stop using it. If you're getting that error message you won't be able to create a new account on your device. Your only options are to re-use one of the accounts previously created, or create a new account on a different iOS device or Mac (running OS X Lion or higher), if you have one.
-
i can not activate my iphone, just bought. the answer is activation service cannot be reached
I had a similar problem some time back when I bought one from the store.
I suggest you try and plug it in to a computer with itunes installed and an internet connection on the computer. then you should be fine.
Hope this solves your problem -
My Ipod Touch 4th Generation is connected to wi-fi and will not open the app store. Says it cannot connect to iTunes Store. I can get on the internet but for some reason it won't connect to the app store or the Software Updates.
Can't connect to the iTunes Store
For the socal sites, are y using a home network?
Did it work before?
Some work networks block sits like social sites. -
I clicked on "update all" on my apps and all updated but my TRX FORCE App. it kept asking me to retry even after I connected to WIFI and downloaded/updated to the latest itunes. Am I missing something else? This was an expensive app that I use everyday for my line of work. ??
It says that the feature I am trying to use it on a network resource that in unavailable. It then asks me to enter an alternative path to a folder containing the installation package 'iTunes64.msi'
That's perfect, thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????
Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Hi there, I bought my mac and my iphone 5 in Colombia and now I am living in UK, my question is can I buy the UK adaptors and connect my computer and my mobile to the energy?
Yes. You just need an appropriate adapter. Apple products work across the full voltage range of 100 to 220v.
-
Good time of day! I can not activate your iPhone. Because I forgot password to bind to the device number. Kam I delete all reference to the device my apple id using the find iPhone! Thank you!
IF he can't remember his infomation he sold you a brick, get your money back and buy it from a retail store.
-
Just got iphone 4 yesterday. I can text to iphone users but not to non-apple users. I am connected to wifi and the imessage is on. What else can I try?
o2_Team wrote:
Settings - Messages - Send As SMS is on?
That setting is only related to iMessage. It causes iMessages to be resent as SMS if iMessage fails. -
I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanksCan anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta. -
i have ios 4.3.3 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?
p.s.: i don't have any cinnection problem.....It could be the fact that your hosts file is directing itself to gs.apple.com Cydia not gs.apple.com Apple,
Hope it helps
http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Why don't some of the photos I took with my iPhone 4S appear on my iPad 3? Both are connected to WiFi and iCloud is activated on both devices.
Welcome to the Apple Community.
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.
Maybe you are looking for
-
Urgent Help Needed for WVC210 camera setup :)
Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not muc
-
Help on cellphones applications ...please...
Hi. I am intending to develop an application to be run on your cellular phones.. Currently I have an algorythm and a prototype written in Visual Basic. Of course, that prototype cannot be run on a cellular phone. I thought the most useful tool to tra
-
BUG: Indesign CC 2014 - significant image artifacts with 'export as JPG'
Issue Spreads exported from InDesign as maximum quality JPGs have heavy artifacts not present in PDF's with equivalent image compression settings. Steps Export spread to JPG (max, baseline, 300ppi) Export spread to PDF (image compression set to JPG,
-
XML parser working with MediaWiki API
I have a little helper for a MediaWiki server. It intended to work the following way: Client side [GWT] ←rpc→ Server side [GWT] JWBF ←http→ MediaWiki API+ GWT - Google Web Toolkit 2.0.4 JWBF - Java Wiki Bot Framework 1.3.2 MediaWiki 1.16 XML JDK1.6
-
How can I get Activity Monitor to work?
I've searched the discussions to no avail, so I have this question: how can I get Activity Monitor to work? It launches and its window opens but then the spinning beachball appears. I've checked the Console and it shows that the Activity Monitor is a