Can't activate the COMPARE function for object DNL_CUST_TVAST for Adapter

Hello
I've applier OSS note 866824 to enable the exchange of the sales area flag deletion. I had to do the initial download for the customizing object DNL_CUST_TVAST but it failed because the no intial load was permitted as the data distribution was active. So I've applied note 887696 to enable the intial load for this object : I've deleted the COMPARE function for this object with transaction R3AC3. I've done the initial load for this object and now I can't add the COMPARE function : the error message is enter linked bdoc type for synchronisation load. and I don't know what to do...
if somebody can help me...
thanks a lot

Thanks for your tip but it does not work, I need to fill this field.
I just have an answer from SAP support, this value COMPARE is relevant for loading data in CDB.
there no sense to add the compare value for this object : the compare load can never be used for this object. It was a delivery error
Edited by: Jerome Munier on Dec 5, 2008 7:13 PM

Similar Messages

Mailbox 'rebuild' is greyed out. How can i activate the rebuild function.

I have 3 mailboxes, one stopped working. I wish to rebuild it but the rebuild function is greyed out. how to I activste it to rebuild my defunt mailbox.

Click the disclosure triangle beside the inbox to show all folders.
Best.

3rd Party Keyboard - How can I activate the backlight functionality?

Hi,
I just got myself a 3rd party monoprice gaming keyboard for my intel iMac (Mid-2011). As you might have guessed, it's a PC keyboard, which is fine, since I've remapped all the keys to work with my Mac. However, one thing I cannot figure out is how to turn on the LED backlighting. Is there anything I can do to get it on?
The keyboard in question:
http://www.amazon.com/Monoprice-Mechanical-Keyboard-Microphone-109181/dp/B0081TQ 83K/ref=cm_cr_pr_product_top

Contact the manufacturer to see if they can assist, I'm reasonably sure no one here would have any idea how to support that product.

How I can activate the tethering function on my Torc 9800

I'm tring to activate the tethering function on my torc 9800 to allow tomtom Go500 to get access to internet for traffic information. I'm not able to find a place explaing how I can set up my Torc 9800. the current version of Torc Software is 6.0 - pck 695. Thanks in advance for any help,
Orlando

Tethering, the act of allowing internet access to your PC or laptop using your phone's wireless network connection, is set up with BlackBerry Desktop Software. Plug your phone in to your PC and open BDS. Once your phone has been recognized, look at the top left for Internet Options or similar. That's where you'll find the control panel to do this.
NOTE: Tethering might not be allowed on your account. Some carriers do not allow this feature and if it can be proven that you've done it against your contract, your service could be cut off. Please make sure tethering is permitted on your account before proceeding.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

HT201441 i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

Welcome to the Apple community.
Contact AppleCare (or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
I'm not exactly sure what procedures are in place for such events, but it may take a while and you may need to provide a death certificate and a note from the executor that the iPad has been willed to yourself.

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

I am having the same problem. I did download the two files and started the .exe file. The .exe file appears to run downloading files. When the bar is full the window dissapears without any options. Both files are in the same folder. any thoughts?

I can't activate my programs even though I paid for a subscription. I did a chat with the help desk and they didn't solve my problem. I want to cancel my account. Please contact me since the chat is down

I can't activate my programs even though I paid for a subscription. I did a chat with the help desk and they didn't solve my problem. I want to cancel my account. Please contact me since the chat is down

Activating after a Find My iPhone lock bricks the device if you don't know the password used by Find My iPhone.
Read through this article to find if your device has an activation lock.
http://www.macworld.com/article/2048739/get-to-know-ios-7-activation-lock.html
If this is what you have - the news is bad:
http://www.cultofmac.com/246755/why-ios-7s-activation-lock-is-a-disaster-waiting -to-happen/

Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite ph

Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
& IMEI is : *****
Br-----------------------
Fazlur
<Personal Information Edited By Host>

It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.

Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.
After I sign on with email address and password, I am also asked to enter a serial number which I was not given...

Hello,
In order to activate the product should get the following option:-
- Use trial or subscription
- I have a serial number
Please select the option - Use trial or subscription and click next- Restart Acrobat and sign in with your Adobe ID
Also, you may refer to the following for more information on activation issues:- Activation & Deactivation Help
Regards,
Nakul

I cannot activate the radio function, no connection is possible, any tipps?

Hey you, can somebody help me to activate the radio function ?
i bought a nano but there is no connection possible between nano and headphones
/ radio. after claiming that I got a new one but there is still the same problem.
what is wrong ? Any idea ?

The first thing you'll want to do is double check to make sure the headset is plugged all the way in. The white part of the headset should be flush with the body of the Nano.
Next, reset the iPod by pressing and holding both the Sleep/Wake and Volume Down buttons together long enough for the Apple logo to appear.
B-rock

How can i activate the auto tag complete

Hi,
where can i activate the function that automatically suggesting tags?
for example after i type in <div alg .... it show me the alternative options for this tag...
it was standard activated but i don't find where i have deactivate this function
Thanks

Hi Ken,
thanks for the answer. But i don't look for auto close.
in looking for he option "automatically suggesting tags"..
bevor it was like this: i insert <div style="f then it shom me the
alternative tags for al options with f...
or when i typ in & it show me all possibilities for &....
like here:

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

Satellite U200-115 - CD Rom error - can't activate the drive from windows

Hi everyone,
I'm having some problems with my DVD rewriter drive on my Satellite U200-115.
It works very intermittently and whenever I power up the machine, the first notice I get is 'cd-rom error' even though there is no disc in the drive.
I can't activate the drive from windows either (icon in system tray).
There is the odd occassion when the drive does work in windows but this is so infrequent that I can't remember the last time (I think it was back in Nov 08).
I want to restore the system as I am getting a lot of windows file icons instead of the proper icons for images e.g. pdf, doc, etc. but am worried that the drive wont read the disc or will stop working during the recovery process.
Any ideas would be gratefully received.
Best WIshes
Nick

If its a software issue the drive will not stop working during the recovery procedure.
Do you get a CD-ROM error in Windows?
You could try to boot from a Linux boot disk. If this work it would be a software problem and not a hardware problem.
Maybe this article from the Microsoft Knowledge Base can help you:
http://support.microsoft.com/kb/314060

Can't activate the COMPARE function for object DNL_CUST_TVAST for Adapter

Similar Messages

Maybe you are looking for