Can't active a datasource
Hi,supers,
I want to activate a DS 0CO_OM_XXXX,but the "Active" botton is gray,and I can't change it(only display on the right mouse menu),the version of this DS is "modified",I want it "Active",what can I do?
thanks!
Hi,
Try using this program to activate if available
RSDS_DATASOURCE_ACTIVATE_ALL
After replication right click on data source "Display Data source in Source System" then come back, this would activate the data source
Try with Inactive version check boc, checked and unchecked,?
Check whether entry is available in table RSDS for your data source.
If available, the program should work, you just need to use the values from these table entries. If entry is not available in RSDS that means that your data source is not transported good.
Regards
Sudheer
Similar Messages
-
Hi,expers,
In next couple of days we will go live, but I hit a strange issue today,Could someone help me?
The case is like this:
We have client 210 and 280 in the same sever, we do the datasouce modify and active in 210 and it auto change in 280, sometimes we use scc1 to copy the request from 210 if it can't auto change in 280 when we enhance the LO datasorce in lbwe.
But today when I add one more field from lbwe for dataource 2lis_02_scl and copy request in scc1, it doen't work at all. So the this datasource can't active in 280 from where we extract data to bw system.
The error log in scc3 is like below:
Table ROOHIECOM is not client-specific
Table ROOSFIELD is not client-specific
Table ROOSOURCE is not client-specific
Table ROOSOURCET is not client-specific
Table ROOSSEG is not client-specific
Error in object R3TR OSOA
Table TMCEXCFS is not client-specific
Table TMCEXCFZ is not client-specific
Program ended with error or warning, return code: 4
Message no. TA146
I will very appreciate if someone could help me to fix the issue.
Thanks.Here are also some error log from scc3,but I can't understand what's the problem. Maybe it could help for you:
Post-import method RSA2_DSOURCE_AFTER_IMPORT started for OSOA L, date and time: 20091216211807
Message no. PU122
Diagnosis
The function module RSA2_DSOURCE_AFTER_IMPORT has been called. It carries out processing
required after the import for the object OSOA of the type L in the edited request.
Error in object R3TR OSOA
Message no. TA360
Thanks. -
Error while activating BC datasources
Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....make sure that the server from which ur data source gets the values are also logged on
-
2LIS_04_P_MATNR - Prob in activating the Datasource in R/3
Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this. -
Gwtting error while activation of datasource
Hi
i am using demo version . while activating my datasource ( flat file and , r/3 datasources)
i am getting this error. please let me know this error will be system related or we can solve our self also
function module SDF/AL_MAP_TRANSID_LOGH DOENT NOT EXIST
please let me know solutionImplement note 1114719. Not sure though, whether this also fixes your other issues mentioned
-
No active writeable datasource found for user creation, check your Persiste
HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay PatelDear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user. -
Regarding Activation of Datasource error
We have replicated datasource from R3 source system and while trying to activate it was posting error
of while activation of transfer structure with conversion exits., We are using 7.0 datasource only.
We checked at RSA3 of datasource and data is coming successfully., we tried with program transferstruc activate program
and rsds-datsource program but couldnt able to get rid of error.
Can you please help me to resolve the issue of what to be done for activation oferror while activation of datsource: Generation of conversion exits and PSA update...
Error when creating transfer structure /BIC/CCGNZP31_MM01_DS in source system Z370_110
Error when activating DataSource ZP31_MM01_DS Z370_110
These are the above errors mentioned while activating the datasource in 7.0. -
Activated all datasources by mistake
Hi all,
I have the following problem - while I was trying to activate in RSA5 an FI data source, by mistake (I didn't click on the Select the Subtree +/- Button) I Activated ALL datasources (around 1046) which were added in a request.
In order to solve this I compared the Development with the Production, and deleted all the Data sources which were not in Production, and also deleted all the objects from the request.
Everything seemed ok. But, now that i did the replication of Data Sources from that system, in the BI system, I encounter the following problem: no data source has "arrived", other than the ones already existing, but for the ones already there, it has added a modified version (by me).(status changed from active to modified)
How can I undo this? It does not bother me, but the next time someone does a change here, problems may occur.
Please help!!!
Thank you so much,
ADHi
Use the program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources.
now goto R3 system --> RSA6 check the data source which you want are active or not.
If not activate them and replicate them into BI system.
Regards,
Venkatesh -
BI Content Remote Activation of Datasource - Transports
During the process of installing BI content in the Dev BW Environment, I am promted to login to the source system (CRM DEV in this case) so that the BI content datasources can be activated and replicated remotely. This process works fine.
The question I have is the following.
When I tranpsort all the BW BI content objects from our DEV BW environment to the BW QA environemt, do I still need to collect the activated datasources in the source system (CRM DEV ) and also transport them to CRM QA ?
Or does the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically when i transport the BW BI content objects from DEV BW to BW QA.
ThanksI don't think, the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically BW QA.
In BI 7.0, the general practice is, first u have transport datasources from ECC Dev to ECC QA...Then replicate these datasources in BI QA.
In most of the cases, these replicated datasources becomes inactive in BI QA.
To over come this, after the replication, u should transport Datasources from BI DEV to QA, so that this DS overwrites replicated (inactive) ones from ECC.
Re: DataSource getting inactive after transport -
Activation of datasource in SBIW
Hi experts
I have activated the datasource 0TCTATYPE_TEXT in development system.
This object has not been assigned to a transport order.
In development system this object is in both object version available: A and D.
In test system only object version D is available.
Any ideas what's wrong?
ThanksI assume you generated this in development class or package (as they call it these days) $TMP
you can change it as follows:
open your DataSource (via RSA1)
follow menu path: Extras > Object Directory Entry
click Display/Change (or F6)
change $TMP to a valid (transportable) package
hit the green tick
you'll either have to assign a transport request then or create a new one -
Activation of datasource :Error modified version
Hi All , Change icon is greyed out is there any program that i can run to activate the real estate datasource. or what is the other way to fix it
1. i activated the datasource in rsa5
2. it comes in rsa6
3. then in bi 7.0 i replicate the datasource but it shows modified version and change and activate button is greyed out.
please help me asap since its a BMW first deliverable and all my datasoources are in modified version. Kindly help
thanks
Soniya KapoorHi, I've seen this problem before. I deleted the datasource in BW and then replicated again.
Regards
Dave -
I tried to update my old iPhone 3GS and is giving me a message that it can be activated. This is my old phone and it shouldn't have a line but I Still like to use it as an iPod. What can I do.
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
Error while activating a datasource
Hi All,
We have created a generic datasource. While we are activating the datasource, its throwing up a message saying: "Error in database while accessing a table." And also "Generation of conversion exit and PSA update". Please advice.
Thanks & Regards,
SanjeevHi All,
There are issues still pending in our report design. Besides the above issue, we have also got another issue related to Absenteeism column.
Example:
The report needs to show the absenteeism column on a monthly basis. If an employee goes on a unscheduled leave for 10 days which are scattered in two months (Ex: he takes leave from 28th April till 7th May), then if the report is executed for April, for that Employee, it should show only 3 days, i.e. 28th, 29th & 30th. The remaining days have to be displayed in the Absenteeism column of May report, i.e 1st, 2nd...till 7th.
There is one record whenever an employee goes on an unscheduled Leave.
Emp ID From Date To Date No of Days
111 28/04/2011 07/05/2011 10
Hence this record has to be split into two, based on the no. of days the employee has gone on an unscheduled leave in both the months like below.
April
Emp ID From Date To Date No of Days
111 28/04/2011 30/04/2011 3
May
Emp ID From Date To Date No of Days
111 01/05/2011 07/05/2011 7
Any inputs are most welcome.
Regards,
Sanjeev. -
Error while activating the datasource during migration
Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
DonivVoodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy
Maybe you are looking for
-
How do i get my email footer to show in the email
I want to send emails and have my email footer appear at the bottom of the email. What actually happens is my email footer appears as an attachment! Its really annoying. How do i make it so that my footer appears at the bottom of every email?
-
Error Code 0x80040fb3 - FIX (8520)
It got ERROR CODE 0x80040fb3 after I updated my desktop software to version 6. I tried to sync with Outlook (2007) and before it completed I got this error message. I uninstalled and went back to previous version. That didn't work. I reinstalled ev
-
Hi - I think I screwed something up and am looking for a quick hand. * G6 .NET box lives at https://www.mydomain.com/portal/server.pt * Collab appears to think the gateway URL is https://www.mydomain.com/server.pt (NOTE that key bit - lacking "/porta
-
I was invited to upgrade to Firefox 8.1 but my old computer decided it didn't like it & kept messing up so I uninstalled it. Now Firefox 8.1 is continually popping up for me to download & is frankly a blinking nuisance. How do I get it to stop doing
-
[OSB Security - OWSM:387183]Invalid CSF Key 'basic.credentials'
[OSB Security - OWSM:387183]Invalid CSF Key 'basic.credentials' set for override 'csf-key' on the service: OWSMTest/OWSMTestBS. This CSF Key does not exist in the Credential Store. I am getting the above error when trying to add a SAML client policy