Can't add a Linux computer, failed to resolve IP address.

I have a Linux computer on workgroup, SCOM on a domain, when I try to add the Linux computer to SCOM, the Discovery Wizard send me a an error: "Unable to discovery"
I put the IP address on the Discovery Scope, I set the credentials with User name and password of root, select the pool and when try to discovery, the Wizard send me a message: "Undiscoverable addresses, Reason: DNS configuration, Details:"Failed
to resolve IP address (x.x.x.x) to name.
x

SCOM needs the name when it generates the certificate for the SSL connection. You can work around this by adding the hostname of the Linux computer to your hosts file with the IP address on the SCOM server.
- On the Linux server run the 'hostname' cmd. You will use this in the hosts file on the SCOM server.
- On the SCOM server edit the C:\Windows\System32\Drivers\etc\hosts file and add the following:
<IP Address of Linux server> <hostname or Linux server>
Run the Discovery Wizard again and it should work. Note that you also need to make sure port 1270 is open on the Linux server.
Regards,
-Steve

Similar Messages

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Apple sells adapters from either 30-pin or Lightning connectors to either HDMI or VGA. Check them out in the Apple Store at http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks or your national equivalent "iPad Cables & Docks" store page.
Be sure to read the comments on whichever adapter is appropriate to your iPad model and your monitor model. Not every user has found satisfaction using them (though many have).

Help! I can't add iCloud to my new ipad. The address it has sent verification to us incorrect. How can I rectify please.

Help! I can't add iCloud to my new ipad. The address it has sent verification to us incorrect. How can I rectify please.

Aw, come on, please... ):

3750x Stack is repeatedly showing error " %ADJ-3-RESOLVE_REQ : Adj resolve request: Failed to resolve IP Address vlan ID ..

Good Morning,
I have a 3750x stack running 15.0(2)SE6.
Today I started seeing some weird problems in the logs
" %ADJ-3-RESOLVE_REQ : Adj resolve request: Failed to resolve <IP Address> <vlan ID>..
To my knowledge no changes have been made except updating the NTP and Timezone settings of the switch.
The problems is that before I rebooted a vmWare - Host all communication with said host worked like a champ. After reboot of said host, the only communications that work are from the host outward. Anyone have any ideas? I would love to reboot, but as this is production hours that is not an option.

Seems that if your logged in you can't search this bug. If you google it while your logged out google will come up with a hit and you can read the bug.
The the text under conditions does not make any sense to me. Nobody wants to see a log message every time the device needs to resolve an arp entry. You shouldn't have to disable something the makes the switch perform better just to avoid filling up the log with garbage.
The message interpreter tells you
Explanation An internal software error occurred.
The details tell you to open a tac case.
Bottom line is..Will it be fixed, and in what code level will it be fixed.

How can I deactivate a computer in iTunes if I don't have access to it? Computer crashed and now I'm at my limit of 5 and can't add my new computer

I'm trying to upgrade the iOS for my iPad 2 and I can't because it will delete all my purchased apps since the computer I'm using can't be activated. My old desktop has no access to the Internet anymore and my laptop is fried so I don't have the ability to deactivate either of them. iTunes says that I've reached my limit of 5 and I have no idea what the other three are, but I need to activate my new laptop so that I can upgrade the iOS on my iPad. How can I deactivate computers that are either not online or dead?

1. open itunes
2. click "itunes store" on left side
3. click "account" on right side
4. login
5. click "deauthorize all" button
this will obviously deauthorize all computer associated with your account, then you can re-add the ones you need afterwards.
note: i've heard (i dont know this for a fact) that you can only do this once per year.

How can I get the local computer's ID and IP address in Labview?

I want to get the local computer's ID and IP address, but i found i can't do it in labview.
Could anybody do me a favor to give me some guidance?
Thank very much!

Under the Communication palette, under TCP, there are two functions you need to get this info': 'String to IP' and 'IP to String.'
1. Drop the String to IP function on the diagram.
2. Do not wire any input to it.
3. Take its Output and wire it to the 'net address' input of the 'IP to String'
5. Display the Output of the 'IP to String'
Depenging on the True/False input to the 'IP to String' function, you get the machine name versus IP address.
See attachemnt... guess it's easier than explaining
Hope this helps.
-Khalid
Attachments:
ip.png ‏2 KB

Can't add a new computer to Apple Remote Desktop

When trying to add an iMac to ARD the add computer window drops down then disappears right back up. I can't even type in my username or password. I tried clicking the iMac in the bonjour list and the add computer window just flashes. I've had this before with a Mac Pro. I swapped network ports and then it worked. Upon swapping back I was able to remote and add via both network interfaces. Since it's an iMac I cannot apply that trick. I did try something similar with airport on the iMac but was unsuccessful. Anyone else have this issue?

Thank you so much that worked perfectly.
I tried searching before posting, but couldn't find a thread that resolved this issue. Discussion search seems to be a bit useless.

HT201303 I recently bought a MacBook Pro and want to purchase music in iTunes. Can I add my new computer to the computer list from which I can purchase music? I could switch computers if necessary.

I recently bought a MacBook Pro and am trying to purchase music from iTunes. For security, it says that I have a different computer trying to purchase music. Can I switch the computer I purchase my music from?

You can purchase music from up to 5 computers at once.
Just sign in and buy

Can't add a second computer to Time Capsule, not enough space

I have a 500 GB Time Capsule and two macs (IMac and Macbook) that I would like to back up. My IMac is backed up, but every time I try and back up the mac book, it tells me I don't have enough space. I have read about deleting individual back ups on time capsule (I have some going back to August), but I figured there has to be an easier/quicker way. What are my other options? Are there settings I can change were it will allow me to back up the macbook as well without going in and individually deleting files off the time capsule? There is only about 30 GB of info on the macbook and 100 GB of info on the Imac so I should have more than enough storage.

Jackson Hole wrote:
I have a 500 GB Time Capsule and two macs (IMac and Macbook) that I would like to back up. My IMac is backed up, but every time I try and back up the mac book, it tells me I don't have enough space. I have read about deleting individual back ups on time capsule (I have some going back to August), but I figured there has to be an easier/quicker way. What are my other options? Are there settings I can change were it will allow me to back up the macbook as well without going in and individually deleting files off the time capsule? There is only about 30 GB of info on the macbook and 100 GB of info on the Imac so I should have more than enough storage.
Time Machine will, by design, fill up all the empty space available to it before it starts deleting old backups to make room for new ones. That's most likely what's happened to you.
One option is to delete a large number of the oldest backups via the procedure in #12 of the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. Note that you'll have to manually compact the sparse image to actually get the space back, as detailed in the pink box there.
The other is to erase the entire HD and let TM start over with both Macs (I'd be inclined to do the initial full backups one at a time, via Ethernet).
Use the +*Airport Utility+* app, in your Applications/Utilities folder.
Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
If you have other data there that you want to keep, you should be able to delete the sparse bundle via the Finder.

Can't connect to XP computer by name, only IP address

Hello. I have a Windows XP Pro computer with a shared folder and a shared printer. When I try to connect using //smb:[computername] to view the shares, the Mac tries for about 30 sec and then says "connection failed. server may not exist etc etc." However, when I use the XP machine's IP address //smb:xxx.xxx.xxx.xxx, then it works - I get the login prompt, and I can then view the share.
I used to be able to use the XP computer name when connecting in Tiger. Anyone know why this stopped working in Snow Leopard? I have 10.6.1
Thanks
David

try installing Bonjour for windows
Another workaround would be add the computer name to your host file.
edit /etc/hosts
add an entry such as
192.x.x.x computername
obviously replace the entries with actual IP address and hostname of the pc.

How do I add my husbands computer as an authorized computer

I have a "family share" account, and I have 4 authorized computers, but for some reason, my husband's computer suddenly gives him the message that his is not authorized for my iTunes account.
How can I see what computers are authorized?
How can I add an new computer/subtract an old one?
How can we share music that, technically, we both pay for, but happen to be on my computer?

iTunes Store: Authorize or deauthorize your Mac or PC - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
iTunes application window (not Finder or a browser) > menus at top > Store menu > drag down to Authorize This Computer. (In earlier versions of iTunes access this option from the Advanced menu). Step-by-step instructions - https://discussions.apple.com/message/16569470
Deauthorize your computer using iTunes - http://support.apple.com/en-us/HT6283
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing

Can't add music to ipod touch even though computer and itunes recognize it

I have an ipod touch 4th generation that has suddenly stopped allowing me to add any music to it. It worked absolutely great with no problems for about a year and suddenly when I load it up on itunes I can't add any music to it at all. if I try and drag any music from my computer on to it, I get this no icon as you can see
Same if I try and add music from my itunes library.
I've done pretty much everything I can think of to try and fix this, I've completely wiped itunes from my computer and re-installed, I've made sure that my ipods ios is up to date, I've reset my ipod, I've completely erased my ipod and restored it to factory settings. I have an old backup but it fails every time I try and restore it, saying that the backup session failed. I've tried resetting the lockdown folder as recommended but when I delete it, itunes can't connect to my ipod, so I ended up restoring the lockdown folder back to where it was from my trash can. I've made sure all my drivers are up to date and my computer is AMD so i know its not an intel chipset/ipod issue. I've turned off my antivirus and computer security programs and that made no difference at all.
These problems are the same when tried on another computer and I'm sure I've done other things as well but I'm drawing a blank trying to think them up.
I have an old ipod mini that has absolutely no problems at all using the same itunes and computer so I'm pretty sure this issue is located just on this ipod. I bought it used on amazon so the warranty and service coverage have already expired, so I kinda have to figure out how to fix it myself..
Anybody help at all with this would be greatly appreciated

I don't see how it could be windows causing the issue since my other ipod works fine with this installation of windows on this computer and I don't at the moment have anyway to back up what I have on my computer in order to re-install windows, but maybe if nobody else has another solution I'll look into it. Thank you for your help and suggestions

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? Can I sync my ipod to a new computer if I allow all the songs to be erased?

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.

Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

HT4352 how can I add an additional apple tv to my computer

How can I add an aditional apple tv to my computer and my remote on my phone?

Hello bardlight. Welcome to the Apple Discussions!
Based on your configuration description, the Logitech TV is physically connected properly to the 802.11n AirPort Extreme Base Station (AEBSn). You do want it connected to one of the available LAN ports on the AEBSn.
By default, the AEBSn, is performing as a DHCP server. Also, by default, most computing devices are configured as DHCP clients. What this means is that the AEBSn should be providing the proper IP addresses to any connected (wired or wireless) in order for that device to access both the network and on to the Internet.
It sounds like that Logitech TV is just not configured properly as a DHCP client.

How can I add contacts from my computer to my Icloud?

How can I add contacts from my computer to my Icloud?

http://help.apple.com/icloud/?lang=en#mmfba7481b

Can't add a Linux computer, failed to resolve IP address.

Similar Messages

Maybe you are looking for