Can't add a new Firewall Rule

I have a very curious issue: I cannot add any new firewall rules at all! Clicking on the New Button does nothing and on the console I get
System Preferences[487] * -[NSCFString objectForKey:]: selector not recognized [self = 0x3f11b0]
I have flushed the firewall with ipfw, deleted the plist file, repaired permissions but the problem ist still there. Any suggestions? (apart from reinstallation)
Adding Firewall Rules through ipfw works...

Whenever I use ipfw I lose the ability to use System Preferences. At first I thought that it compared kernel memory with the plist file and if it found a difference, assumed another firewall was running and disabled itself. But I also deleted the plist file (assuming it would build one from kmem) but that didn't work. Right now I assume there's another file somewhere. It wouldn't make any sense to keep another table in kmem. The weird part is that rules can be the same, but different sequence numbers will cause this problem. There weren't sequence numbers in the plist file, so there's probably another file somewhere.
I think your error is from the missing plist file. A reboot should clear it up.

Similar Messages

Can I add a new phone user to my itunes account without overriding my phone data?, can I add a new phone user to my itunes account without overriding my phone data?

Can I add a new phone user to my itunes account without overriding my phone data?

Read this
http://support.apple.com/kb/HT1495

Can't add a new event to iCal on my iMac - but the event sync's to my iPad - is this a Lion problem? iCloud is on.

Can't add a NEW EVENT to my iCal on my iMac- however the event is sync'd to my iPad with no problem. iCloud is turned on for iCal. Is this a Lion problem or something turned pff. I cannot find an answer. Help?
Williamfronsc

William,
It is a possibility that you are adding new events to your "On My Mac" calendars.
"On My Mac" calendars will not sync with iCloud. After backing up the "On My Mac" calendars, and ensuring that all events are duplicated on your iCloud calendars you can delete any "On My Mac" calendars.
For further troubleshooting advice read iCloud: Troubleshooting iCloud Calendar.

I can't add a new event to my calendar on iPhone.

I can't add a new event to my calendar on iPhone. The plus sign is greyed out and even when I try it with Siri it says "Sorry. I can't do that right now". I did my due diligence and searched all over the forums and internet and I can't fix this. There was a listing in a forum where a lady had this same symptom but it looks like toggling iCloud worked for her. Not for me. I went into Settings>iCloud and turned off Calendar and then turned it back on. Still nothing. I even went to iCloud Backup and turned it on then back off and still nothing. Anyone have any suggestions? Thanks!

See if you can go to your Calendars App and select a previous event to see what Calendar the event was added to (iCloud or Yahoo). After that is determined you can go to www.iCloud.com or calendar.yahoo.com and add the event there to see if it will populate on your device. Another troubleshooting step is deleting the iCloud account from your device and also deleting the Yahoo account. Then check to see if you can add an event without it syncing to a email. If you can then it may have just been a bug and you can add both accounts back and try adding the event again. I would also recommend only using one service to sync your Contacts, Calendars, Reminders, etc. Such as either iCloud only or Yahoo only, as using multiple accounts means your data is spread around and can be hard to isolate when something goes wrong.

ICal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

iCal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

We are all entitled to our own opinions. So I respect you there brother
But then again, Apple has its own basis. iOS is what's selling like pancakes not Macs, so if the gazillions out there are using iOS device and have gotten used to the calendar in their iOS devices. Wouldn't you think it made sense if Lion has the same calendar look and feel?
Everything was considered and weighthed when they developed Lion. They even mentioned it in the press, They were blown away with the success of iOS so they are extending it to OSX.
Quite frankly, I like the old iCal but yeah I don't expect anything in SL to stay in Lion otherwise it'll be another Cat name related to Leopard
People should start looking at this perspective and not get STUCK in the old OS.

How can I add a new filed to standart SAP Screen

Hi eveybody,
I am using ima11 t-code and I need to add A new screen field to standart SAP screen(program No SAPLAIA1 Screen:1001 ).I have found five user-exits(AAIR0001,AAIR0002A,AIR0003,AAIR0004,AAIR0006) but there is no screen-exit. How can I add a new filed to standart SAP Screen.Is it possible? If it is possible, how can I do that?

hi
yes you can add a search help for a filed on the screen
but you need to find out for the USER EXIT available for that T-CODE
because it is a standard T-CODE we can't add code directly to the standard T-code
1st we need to find out for a user exit and then add code in that user exit
reward if usefull

How can i add a new 53 rd week to calendar

Hi All,
we have requirment i need to add a new week to fiscal year 2011 for septemebr,2011
Please let me know how can i add a new week to this month,
Thanks & regards,
Chand

Hi All,
we have requirment i need to add a new week to fiscal year 2011 for septemebr,2011
Please let me know how can i add a new week to this month,
Thanks & regards,
Chand

How can i add a new characteristic to Sap standard InfoObject?

Hi Experts,
Please anyone let me know how can I add a new characteristic or a key figure into an SAP standard InfoObject in order to add it to the standard InfoCube? The situation is I would like to add region and business unit to the characteristics of the Industrial Hygiene and Safety. After that, I would like to add them to the InfoCube called Accidents: Person Involved [0EIH_C02] that is located in the MultiProvider called Accidents: Complete View [0EIH_MC01]. Is it feasible to do this way?
I just learned the BW/BI, so please help me with this. I would really appreciate your responses.
Thanks,
-Napadol

Hi Napadol,
To add a attribute in a char:
1) Go to info object/char in change mode and add the additional attribute you want and select navigational attribute in attribute tab if you want. (Create these additional attribute first in info object catalouge)
2) Activate the Object/Char
3) open info cube in change mode and pick the characteristic from left panel to info cube dimension.
4) Activate infocube.
5) Go to multi provider add the char in one of the dimension and do identification for this char and activate.
Regards,
Kams

How can I add a new entry for determining a requirement type

Dear Friends,
How can I add a new entry for determining a requirement type
via Item Category + MRP type, I see no new entries selection.
This is in Avb Check & TOR-> TOR-> Determination of req type using transaction.
Please help.
Regards
Ravi.

Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
Just one node above?
Never mind, you need to add entry on item category:S

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

How can I add a new column in compress partition table.

I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected]

How can I add a new column to Grid view under Tests tab

I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks Katherine

I don't think this is possible.
Regards,
Jamie

How can I add a new message(custom text message) to the holiday approval em

How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIA

The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

How can i add a new user and change user'password with javamail?

how can i add a new user and change user'password from a mailserver with javamail?
email:[email protected]

Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
if it is linux...u have to use some shell programming\
bye for now let me know if this guides you or if you need some more stuff.
bye

How can I add a new column to an Attachments Table

How can I add a new column to an Attachments Table??
And I want to remove the usage column also!
Thanks!

I tried to remove the usage column doing this:
OAAttachmentTableBean attachTable = (OAAttachmentTableBean)webBean.findChildRecursive("attachTable");
if (attachTable != null)
attachTable.findChildRecursive("UsageTypeColumn").setRendered(false);
but I'm getting null pointer exception on "UsageTypeColumn"...
:(

Can't add a new Firewall Rule

Similar Messages

Maybe you are looking for