Can't add a slideshow, change name

I have had nothing but problems with Idvd. Now with version 6 I can't even add a slideshow. When I click the add button I get the text that says My Slideshow but when I click it to change the name it selects the title above. I cannot get it to open to add slides. Basically it doesn't work at all like it is supposed to. It looks like I could have one slideshow called My slideshow but that is no fun. Anyone have any ideas why this is happening. I already reinstalled it, deleted preference files and no luck. Ideas?

It's the Video card on the G4. Apple tech support confirmed that our systems (older G4) dont have the power to exploit the new software. I just upgraded to an ATI Redeon 9200 MAC Edition and the problem went away. About $137 at Other World Computing. It's worth the money. But I agree, what a pain in the butt to see our older systems being put out to pasture. I figure this will stretch my MAC out for another 12-24 months (already did the 400mhz to 1.25ghz upgrade last year.
Keith

Similar Messages

  • Views in MM03, how can I add fields and changes fields labels

    Hi !!
      I need to change some labels that appear on Sales: Sales Org  2 (view on MM03, MM02..MM01)...
       Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
       example: when I enter on MM03..I select differents views(including Sales: Sales Org  2), later I specify  sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org  2).
      When I access in tab: Sales: Sales Org  2, I can see one Group that it's called
    Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example:  Material Group 1 (MVKE.MVGR1 )... I would like to know :
    1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
    2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
      I will appreciate your help!!! 
      I will give you points for your answer
    Alice

    Hi Alice,
    And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
    If I need to add some values???
    After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well.  Give it try.
    And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
    I do not understand your questions. Can you elaborate more?
    Regards,
    Ferry Lianto

  • Can't add signature or change signatures in Mail

    I hadn't changed signatures in a very long time so I don't know when this started but...
    I tried to add a signature and it will not show up in the pop-up menu in the New Message "signature" menu.
    Also I can not edit previously created signatures.
    I realize that trashing my mail preference file may correct this but it will, I assume, delete all of my signatures and probably reset many other things.
    Any ideas on how I can fix this with the minimum amount of rebuilding of preferences?
    Thanks.
    RonL

    How did you fix it? I expierience the same problem on my old Panther (10.3.9). Whenever I open my 'mail preferences'window, the only tab I can see and change is 'Accounts'. The tabs 'General, RSS, Fonts&Colors, Viewing, Composing, Signatures and Rules' all disappeared.

  • Messages Doesn't Communicate with AIM Server - Can't add/delete buddies, change privacy settings

    This has frustrated me and I think I've diagnosed the problem but I need help!
    The problem occurs in Messages for Mountain Lion. I've set up my AIM buddy list and everything seems like it's working. But, when I try to add a buddy, it doesn't matter whether they are online or not, they appear to be offline. Then, when I quit Messages and launch it again, that entry has disappeared from the buddy list altogether. The same thing occurs when I try to delete a buddy or anything else that involves a change at the AIM server.
    The problem is the Contacts app. I know that. If I trash my address book, everything works perfectly! If I add cards back one by one, the card that breaks Messages is always a different one. There isn't one "culprit." I also know that it's probably because I have had these contacts for years and I have migrated them from platform to platform. It's not a local problem though: if I trash my address book and then sync with iCloud to get my contacts back, it happens again.
    There's something about the way Contacts and Messages handle AIM that doesn't allow changes to propagate to/from the AIM server and I can't discern any pattern that would lead to a solution.
    Does anyone have any insight here? Is this just a bug in Messages?

    Note: These instructions are for OS X 10.8 or later. In OS X 10.7, the procedure is the same, but the application is named "Address Book" instead of "Contacts."
    Step 1
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Caches/com.apple.AddressBookSourceSync
    Right-click or control-click the highlighted line and select 
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash.
    Log out, log back in, and test. If there's no change, go to the next step.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    A. If you use iCloud, uncheck the box marked Contacts in the iCloud preference pane. Press return to confirm, or click  Keep on Mac in the dialog that opens.
    B. From the list of groups on the left side of the Contacts window, select All On My Mac. If that group doesn't exist or is empty, skip this step. Otherwise, from the menu bar, select
    File ▹ Export ▹ Export vCard
    Save the exported contacts to the Desktop.
    C. Quit Contacts. Triple-click the text on the line below on this page to select it, then copy it to the Clipboard (command-C):
    ~/Library/Application Support/AddressBook
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, paste into the box that opens (command-V), and press return.
    A Finder window will open with a folder selected. Move the selected folder to the Desktop, leaving the window open for now.
    D. Launch Contacts. Your contacts will be gone. If you took Step 2, then double-click the file you created in that step and confirm that you want to import from it. Your contacts will reappear.
    E. Re-enable Contacts in the iCloud preference pane, if you disabled it. Test. If the issue is resolved, delete the AddressBook folder and the vCard file on the Desktop and close the open folder window.
    Otherwise, quit Contacts again and put the AddressBook folder back where it was, overwriting the newer one that will have been created in its place. Post your results.

  • Can you add a word or name to the spell checker in pages for iPad?

    I'm looking for a way to add a word, alternate spelling or proper name to the spell checker for the newest version of pages for iPad so they won't keep showing up as "misspelled".
    Can you help?

    No, the ability to add a word to spell check dictionary is not a current feature.

  • How can I add a slideshow banner in Dreamweaver CS4?

    I am relatively new to Dreamweaver and am looking for a way to make a simple banner that will display several images at a time interval and move to the next image.  I have tried looking for different tutorials, but haven't really found a good one yet.

    Do a Google search for jQuery banner rotator.  There are dozens of them on the web.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Add the carrier description/name on a sales order

    On sales order in Tax tab when a carrier is selected, it´s only shown the field with carrier cod without his description/name.
    How can I add the carrier description/name on a sales order?

    Marcio,
    This should be simple.
    Save this SQL Code and attach it to the Transport Name User field /  any other field where you want the shipping name.
    SELECT T0.[TrnspName\] FROM  [dbo\].[OSHP\] T0 WHERE T0.[TrnspCode\] = $[ORDR.TrnspCode\]
    When I use $[ORDR.TrnspCode\] it refers to a field value on the form.  I am presuming this is the field you are using.  If your TrnspCode is in a different field.  From the View Menu click System Information.  This will enable you see the table and field information on the Status Bar
    Use this information instead of $[ORDR.TrnspCode\]
    Suda

  • Difficulty to add, delete or change music on an iPhone

    Hello, since I bought a new PC and downloaded iTunes, I can't add, delete or change the informations of any song on my iPhone 5s. How can I fix that problem?
    Thank you!

    Was the music copied to your phone by syncing with your computer? If so do another sync and deselect all music. Then when you click on apply or sync all music previously synced will be removed.

  • Please can you help my Register of names... I want a formula that simply adds numbers in a horizontal row of cells that increase as I add them. Thanks..

    Please can you help my Register of names... I want a formula that simply adds numbers in a horizontal row of cells that increase as I add them. It can not be a range of selected cells  because as I add new cells they are not in the range. Thanks..

    Hi Dave,
    Any formula that references its own row will return the error message you see unless it is in a Header column.
    Convert columns B, C and D to Header Columns, and Jerry's formula will work just fine:
    One caution, though—multiple header columns are a known factor in slowing Numbers down as the table gets larger. You can avoid adding header columns by specifying a 'fixed' range of cells from wich to get the sum and count values in C2 and D2.
    Make sure the range includes at least one 'extra' column. As more runs are added, add columns by inserting them before this 'extra column. If the new columns are inside the range specified in the formula, Numbers will adjust the formula to add the new columns. If they are outside the range, you will need to edit the formulas yourself.
    Note revised formula:
    To add four more runs, click on any cell in column L, then press option-left arrow four times to insert four new columns. Note the change in the formula:
    The last column is always included in the formula, but never gets counted (or summed) because its content is interpreted as a Text value, not a number.
    Note: Except for the change formulas and added columns, this is your original table, with one Header row and one Header column.
    Regards,
    Barry
    Regards,
    barry

  • HI Can I add a child node to an Element Node with a name that  exists

    HI,
    Can I add a child node to an Element Node with a name that is already existing in the Element Node.
    Let me explain what I need exactly.
    My Existing element Node looks like this:
    <form>
    <name>
    <FirstName></FirstName>
    <LastName></LastName>
    </name>
    </form>
    Can I add another child node with hte name 'FirstName' to the 'name' node ..?
    I want to put a attribute rvsn with a value 1 for the original 'FirstName' element Node.
    so the new Element Node should look like the foloowing:
    <form>
    <name>
    <FirstName rvsn="1"></FirstName>
    <FirstName></FirstName>
    <LastName></LastName>
    </name>
    </form>
    Hopefully this is valid XML !!
    when I tried to use appendChild, it removed the previous node and put the new one. Thats what is the documentation also said.. I read it after I tried it :(
    Anyway, ther should be another way to add a node like that.
    Any hints, ideas will be of great help.
    -Thanks in advance !!
    Murthy

    // this method will start marking the old values with a revision number.
         private void saveNodeDetails (Node node) {
    String Content = "";
    String nodeName = "";
    int rvsn = getRvsn();
    int type = node.getNodeType();
    int tempRvsn = 0;
    String tempNodeName = "";
    String tempParentNodeName = "";
    Node tempParentNode = null;
    // check if element
    if (type == Node.ELEMENT_NODE) {
    Node traverseNode = node;
    nodeName = getNodeName(traverseNode);
    if (nodeName != null && nodeName.trim().length() > 1)
    nodeName = nodeName.substring(0, nodeName.length() - 1);
    if (_debug)
    System.out.print("2. ELEMENT_NODE name## " + nodeName);
    // if the element has no children, its leaf node.
    // if its there in the Hashtble, then update the value from the hashtable.
    if (reqParams.containsKey(nodeName)) {
    if (_debug) System.out.println("3. Hash Value = " + reqParams.get(nodeName).toString());
    if (traverseNode == null)
    if (_debug) System.out.println("3A. traverseNode == null ");
    if (node == null)
    if (_debug) System.out.println("3B. node == null ::(((((");
    // get the node children
    NodeList children = node.getChildNodes();
    // end of getting children for the Node.
    if (_debug) System.out.println("4. Got ChildNodes ");
    if (children != null) {
    int length = 0;
    length = children.getLength();
    if (_debug) System.out.println("5. Got children Length = " + length);
    if( ((Element) node).hasAttribute("rvsn") ){
    System.out.println(" node has Attribute(rvsn) ");
    tempRvsn = Integer.parseInt( ((Element) node).getAttribute("rvsn") );
    if( tempRvsn == rvsn){
    // user is changing the same data again and again.
    // so remove the text node and append the new value as text node finally
    for (int index = 0; index < length; index++) {
    if (_debug) System.out.println("6. index = " + index);
    if (_debug) System.out.println(index + ": children.item( index )@saveNodeDetails@ContainerDoc = " + children.item(index).getNodeType() + " -- " + children.item(index).getNodeValue());
    if (children.item(index).getNodeType() == Node.TEXT_NODE)
    node.removeChild(children.item(index));
    }else{
    int l= 0; // do not do any thing if the current node rvsn is different from the rvsn of the DOM
    // programme logic could enter this part when ther are multiple revisions of the NODe in the DOM,
    // and we are traversing through the previous versions of it.
    } else{
    System.out.println(" node has no Attribute(rvsn) ");
    // the node has no rvsn attribute.
    // it is the initial version of the dom.
    // add the rvsn from the DOM to this NODE for the first time.
    ((Element) node).setAttribute("rvsn", (new Integer(rvsn)).toString() );
    // get parent node and add a new child node with the same name as current node.
    // so parent node will have the previous node with a rvsn and a new node without the rvsn !!
    tempNodeName = node.getNodeName();
    tempParentNode = node.getParentNode();
    tempParentNodeName = tempParentNode.getNodeName();
    System.out.println(" adding node: " + tempNodeName + " to : " + tempParentNodeName);
    node = addNode(tempParentNode, tempNodeName, "");
    getNodeName(node); // print the name of the node after modifying it !!!
    printSiblings(node);
    //System.out.println(" After adding the node : " + getNodeName(node));
    } else if (_debug) {
    System.out.println("7. Node name exist in the Hash but has no children to be removed..!!:: @saveNodeDetails ");
    if (_debug) System.out.println("7B. Update the dom from the hash value " + nodeName + ", " + reqParams.get(nodeName).toString());
    node.appendChild(document.createTextNode(reqParams.get(nodeName).toString()));
    if (node != null) {
    if ( ( (Element) node).hasAttribute("rvw"))
    ( (Element) node).removeAttribute("rvw");
    if ( ( (Element) node).hasAttribute("msg"))
    ( (Element) node).removeAttribute("msg");
    if ( ( (Element) node).hasAttribute("dor"))
    ( (Element) node).removeAttribute("dor");
    }// end of if (type == Node.ELEMENT_NODE)
    NodeList children = node.getChildNodes();
    if (children != null) {
    for (int i = 0; i < children.getLength(); i++) {
    saveNodeDetails(children.item(i));
         } // end of saveNodeDetails method
    public Node addNode(Node parentNode, String nodeName, String value){
    Node newNode = null;
    try{
    newNode = parentNode.appendChild( document.createElement(nodeName) );
    newNode.appendChild( document.createTextNode( value ) );
    }catch(Exception Ex){
    System.out.println("2. Exception@addNode@ContainerDoc = " + Ex);
    return newNode ;
    } // end of addNode method

  • How can I add/change art work to albums where the art work isn't available at iTunes?

    How can I add/change art work to albums where the art work isn't available at iTunes?

    Go to google and search for the artwork.  When you find it, save it to your computer.  Right click the album and select get info.  Drag the image you saved to the empty box for album art.

  • How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts if changes on all computers.

    How can I uniquely identify computers on the same network/account specifically for airdrop use?  When I change name on one computer under contacts it changes on all computers.  I would like to change icon and name for each computer.

    you would need to setup a VPN and tunnel into your office.
    FYI..the default ports are 3283 and 5900.

  • How can i add a new user and change user'password with javamail?

    how can i add a new user and change user'password from a mailserver with javamail?
    email:[email protected]

    Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
    if it is linux...u have to use some shell programming\
    bye for now let me know if this guides you or if you need some more stuff.
    bye

  • When I try to add a new event to iCal a dialog says "you can't add or change events in the Birthday Calendar". How do I cancel this?

    When I try to add a New Event to iCal a dialog box keeps saying "you can't add or change events in the Birthday Calendar". iCal is, however, receiving up-dates from my other devoces via iCloud. Can anyone help unblock this for me please?

    You can not add events to the birthday's calendar. To add birthday's to the birthday calendar you need to add the birthday to a contact in the Contacts app.
    You can set your default calendar here:
    iCal > Preferences > General  > Default Calendar and chose the calendar you want to default to.

  • Framemaker uses $filename for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen?

    Framemaker uses <$filename> for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen? In compiling our books it would be helpful to not have this extension appear as it then requires us to create extra files without them.

    See: System Variables

Maybe you are looking for