Can't add any devices to iSync

Hi - i've recently stoppped using my Mac Mini and gone back to my 12" Powerbook. I'd like to be able to sync my phone to my Mac, but I can't. I have the latest version of OSX and iSync 2.1, and I know my Sony Ericsson phone is compatible because I've used it with the same software on my Mac Mini.
The phone pairs with my Powerbook, and I can use Bluetooth file exchange, but when I open iSync, and select NEW DEVICE from the menu, nothing happens. no windows appear at all.
I've tried...
- rolling back to an earlier iSync version (it wouldn't let me since there was a newer version installed
- trashing iSyncs preferences (the ones i could find anyways)
- reinstalling 10.4 and reupgrading
- reinstalling iSync 2.1
So any ideas??

Yes, I figured out that iPod syncing moved to iTunes.
However, iSync does NOT recognize my phone (v265) via the USB cable. System profiler sees the phone fine. I guess this is a problem since Tiger for my supposedly supported phone:
http://www.macfixitforums.com/php/showflat.php?Cat=&Board=Forum23&Number=676983& page=0&view=collapsed&sb=5&o=31&fpart=1
So now I'll have to jump through all these hoops using USB Prober and self-editing of the app just to get it to work the way it did right before the upgrade to Tiger. Good thing I'm technically savvy. Others in my situation might not have it as easy.

Similar Messages

Reinstalled Network Monitor - Now I can't add any devices

Hey GuysI've been trying to troubleshoot a time sync issue I've been getting on one of my networks I'm managing.The error I'm getting on all machines is:
Log Name : SystemLog Source : Microsoft-Windows-Time-ServiceLog EventID : 50Log Time Generated : 5/07/2015 4:54:18 PMLog Message : The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization I'm 1x host with 3x VM servers. Host OS is VMWare. I've disabled the VM Host time sync in the VM settings. The host time is correct and holding.On the DC I've run the following command and it seems to be keeping time.net stop w32timew32tm /config /syncfromflags:manual /manualpeerlist:"au.pool.ntp.org, tic.ntp.telstra.net, toc.ntp.telstra.net"w32tm /config /reliable:yesnet start w32timew32tm /resync...

At DEF CON 23 this summer, an information security consultant plans to unveil ProxyHam, a hardware device that bears much promise for the future of web anonymity. Benjamin Caudill, who is founder and Principal Consultant for Rhino Security Labs, developed the product in response to the growing threats against web privacy, particularly those arising from […]…Read MoreThe post ProxyHam: A 2.5-Mile Leap for Web Anonymity appeared first on The State of Security.
Read More

When plguging my iPad into my mac nothing happens at all. looking at iTunes there is no devices and I can't add any. Hope you can help. Vic Donovan

When plguging my iPad into my mac nothing happens at all. looking at iTunes there is no devices and I can't add any. Hope you can help. Vic Donovan

If you are using iTunes version 11...
See Here first...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/
If no joy... See these 2 links...
For Mac > http://support.apple.com/kb/ts1591
iPhone not appearing in iTunes

Can't add any file

Hello.
i can't add any file to my itunes.when i wanted add a music,folder or file to my library,itunes crashed And i get the error message "iTunes has stopped working" and the only option I have is to close the program. I looked around the Apple suppport site and did everything they recommended. Like:uninstalling iTunes,Apple Software Update,adding the path and disconnecting internet.I get the newest version of itunes But nothing, I still can't add a file.unfortunately i should restore my iPhone but i can't add thr firmware. I have the same problem with itools and ifunbox.I am using Windows 7.
What should i do?
Thank you for reading

read iM08's manual..
drag'n drop isn't supported in iM08 ..
follow the 'Import...' routine ..
note: iM08 is meant for camcorders (and similiar devices), not a 'all kind of video-files'..

My iphone is registered to my old macbook. How do I link it to my new computer? I can't add any new music to it.

My iphone is registered to my old macbook. How do I link it to my new computer? I can't add any new music to it.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Can not add IPS devices to IME 7.0.1, 7.0.2, 7.0.3 or 7.1.1

Hi!
On a new XP SP3 machine with Java 1.6.0.27, I can not add any IPS devices (AIP-SSM-20). I can log in on them with ssh or ASDM.
I always get this error:
"Error response from IME Server - IOException: Read Time Out. IME IME Server is not responding. Please check if it is running"
IME Server service is running (IMEServer.exe and IMEJava.exe process are running on the PC). Trying to restart services it hungs on "Stoping" ... have to kill both process with taskkill and then, restart the Cisco IPS Manager Express service. MySQL-IME servies is up and running
I tried with IME 7.0.1, 7.0.2, 7.0.3 and 7.1.1 with same result.
NO firewall on PC, full access allowed on ASA, PC-ASA-IPS are on the same subnet/VLAN
Tried to re-create the IPS certificates, same error.
On Java properties, Direct Connection option on Network configuration is selected.
Any idea what's wrong or what I can try to get IME working?
Thanks

In most cases I have encountered exhibiting this behavior, IME is being affected (denied/blocked/conflicting/stopped/etc.) by a HIPS software product installed on the system. If you are able to identify such a product, then try temporarily disabling/removing it and testing again. Some antivirus products can cause this type of behavior as well (including some level of basic HIPS functionality), so you may find that to be the culprit.
If you are unable to identify the cause, test on a clean OS install (not an existing pre-made image or IT-created image that includes modifications/domain membership/packages/etc.); a completely clean OS install with IME 7.1.1.

I can not add any content from my computer to the iPhone through iTunes

I can not add any content from my computer to the iPhone through iTunes

syncing itunes windows
first open itunes on windows computer
there's a small shaded box in upper left corner click it and show menu bar
now go under view and show side bar
go under help and check for updates (11.1.3 current) - update if needed
plug in iphone (or ipad, ipod ect..)
when the device shows up in sidebar click on the name of device not the arrow
this opens up a summary page
across top says info, apps, music, photos, ect...
click on what you want to sync ie music
check the top box that says sync music select -entire library or selected songs and pick what you want by checking
now apply or sync at bottom
Peace, Clyde

I can remove add trusted devices are used in addition to my password

i can remove add trusted devices are used in addition to my password in appleid

Hi hoang32,
Thanks for visiting Apple Support Communities.
It sounds like you are wondering about removing or adding trusted devices to use with two-step verification for your Apple ID.
You can use these steps to remove or add a trusted device:
As long as you still have your Recovery Key and remember your Apple ID password, you can sign in and add a new trusted device to your account. You can also remove any devices you may have lost, sold, or given away.
Go to My Apple ID (appleid.apple.com), select "Manage your Apple ID," and sign in.
On the Verify Your Identity screen, select "Unable to receive messages at any of your devices?"
In the pop-up window, enter your Recovery Key.
Then, under "Edit your Apple ID," select Password and Security > Trusted devices > Manage.
Remove the device you no longer wish to use to verify your identity.
Either verify another device already listed, or select "Set up Find My iPhone" to add a new trusted device to your list.
From:
Apple ID: Can't sign in with two-step verification - Apple Support
For more help with two-step verification, see the Frequently Asked Questions:
Frequently asked questions about two-step verification for Apple ID - Apple Support
Sincerely,
Jeremy

I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive and then tried to transfer it to my iMac. My music skips like a scratched cd now and I can't add any to my iPhone. Help please!

I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive right before my old mac laptop died and then tried to transfer it to my new iMac. Now when I try to play my old music it skips like a scratched cd. Also, now I can't add any music to my iPhone unless it was purchased recently through itunes and downloaded through icloud. I tried to "Organize" my library in hopes of correcting the problem but my iMac just ejects my external harddrive part way through. Please help!

Ejects the harddrive?
Of what did your old Mac die?
It sounds to me like you have some file corruption somewhere. Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting.

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? Can I sync my ipod to a new computer if I allow all the songs to be erased?

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.

Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

Just updated to iTunes 10.2.1 and now can't add any new songs.

My MACbook is running 10.5.8 and just last week I updated to iTunes 10.2.1 but now I can't add any new songs at all. I go through the motions but when I check the "recently added" checklist, it's blank. The song is never added to my iTunes library. Is there a fix for this?

RESOLVED.
I tried updating iTunes to 10.2.2 thinking this might somehow help me but same situation. Upon further investigation, the set of MP3s I was trying to add didn't have the typical MP3 logo on them. When I tried to delete them from my system, it said "in use by application". I forced a delete. I copied the MP3s again to my MACbook and this time was successful in adding them. Looks like it was a bad set of MP3s and not iTunes.

ITunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?

iTunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?

Not if you sync your contact to itunes using the program provide i.e outlook..etc

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

Can't add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

I have 2 email accounts Gmail and Bell mail. I can add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

Mailboxes can be added only to IMAP accounts. Is Bell setup as IMPAP or POP?

How can i add a device on find my iPhone?

how can i add a device on find my iPhone?

You activate iCloud and Find my iPhone on the device you want to track using your Apple ID.

Can't add any devices to iSync

Similar Messages

Maybe you are looking for