Can't add AX to TC network

I used 2005 AX as a base station. After buying TC I wanted to extend my TC Apple network with the AX. When I tried to add AX to the network and configure it, AirPort Utility wanted me first to switch from TC Apple network to AX Apple network.
I just want to have one TC network. How can I just add AX to this network without network switching? I did reset AX to factory setting.
Milan

one option would be to disconnect a computer from the network and use an ethernet cable directly to the APX. use the airport utility to configure the APX in this manner.
another option would be to allow it to switch networks, and see if you can tweak the settings at that point.

Similar Messages

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How can I add or change the Network I'D for the TouchPad?

Most devices on a network have names for the device for one reason or another. This helps to distinguish between connected devices and the legitimacy thereof.
So far I have been unable to add a Network ID to this TouchPad.
With the Amazon Kindle Fire had seen the network ID as "My Phone" which I really wanted to change, and fast. Did manage to change it with an Android app called Fing, which allowed me to use a rather unorthodox network identification name.
Would like to find another network utility that can do the same for the HP TouchPad. Any ideas as to a utility, or a more manual method? Fing via the Kindle Fire shows no network ID for my TouchPad.
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

Hello Xelkos,
What you're talking about is actually a feature of DHCP. When asking for an IP address, a client can send a hostname to the server so that it can be easily identified in a human-readable way.
By default, this is disabled on the TouchPad. To enable it, you're going to need to edit a text file on the device. There's lots of different ways to do this, so pick your favorite and then follow these insturctions.
Find /etc/dhclient.conf and open it
Find the line that starts with:
# send-hostname
Delete the "#" sign in front of the line and change the text inside the quotes. This text should be whatever you want your hostname to be:
send-hostname "TouchPad"
Once you've done that, save and close the file
Next, turn Wi-Fi off and then back on. You should now see your hostname show up on your Access Point / Router.
NOTE: Remember that in order to make these changes permanent, you must set the file system as read-write:
mount -o remount,rw /
You must also set it back to read-only when you're done:
mount -o remount,ro /

Upgraded to 10.5.8 and now can't see either of my networked printers

Hello all, I just upgraded my G5 dual 2.5 to 10.5.8. I have two printers that are both connected to separate Airport Extremes. My G5 ethernet port is connected to a linksys WET11 wireless ethernet bridge, which is in turn connected to the wi-fi network of the main airport. Here is my problem. I can surf the web just fine, so clearly my G5 is seeing the Airport. However ever since upgrading to 10.5.8 I can't add either of my networked printers in the printer setup. It just doesn't see any printers. I've reset the printing in the OS (control clicking on the print prefs and resetting followed by reboot) I've rebooted both the printer and the airport separately and I've double checked that the printer is set as a shared printer in the airport admin software. My laptop (an ibook g4) also running 10.5.8, has no problem seeing both networked printers and printing to them. I'm flummoxed as to why my tower suddenly can't. (It could see both with the exact same setup running 10.4.11) Any ideas? Your help is greatly appreciated, since this is very frustrating! thanks,
-Andrew

Your network setup is a little complicated. Can you explain it a little better and confirm that there's only one DHCP server in it - all devices get IP addresses from one of the Airport Extremes, for example?
It sounds like maybe you have two or more separated subnets.

How can I add a Time Capsule 3TB to a network with an older Time Capsule 2TB?

I have a 2010 Macbook Pro with 500 GB HD and a 2013 Macbook Pro with 1TB HD. I am using Mavericks and will migrate to OS X Yosemite when it becomes available. I tried backing both up with my older Time Capsule with 2 TB of space but it isn't enough. So, today I bought the new Time Capsule 3 TB to add on to my network. I want to use both TCs in order to have 5 TB for backup.
I have a Brother printer and my Comcast Cable Modem connected to the old Time Capsule. I also have an Apple TV with 1080p HD that uses the internet wirelessly through the old Time Capsule.
My first question is what should connect to what and in what order? Should the new TC connect directly to the old TC and if so, with what cable?
My 2nd question is: Can I move several 100 GB of old data that I rarely use onto the 3TB TC so that I could access the data from either computer whenever I need it, without having the data on either computer?
Thank you.

This is a pretty easy setup.
Basically just plug the new TC WAN port into the old TC LAN port.
Run the airport utility on the computer and it should recognise that the new TC is plugged into another one.. and setup bridge mode and create a wireless network.. if not you can jump in and edit it at the end of the setup.
You could also swap things around with the new TC as the main router.. and the old one as the secondary.. but people are experiencing some issues with WAN connection to some cable modems.. so you need to be prepared if you have issues to go back to the original setup.
You will use an ethernet patch cable to connect them. I recommend if you have them in the same area place them at least a couple of meters apart.. so buy a 2-3M patch cable at least.. (8-9ft). Even better would be to install the new TC closer to the clients that will use it.. to improve wireless in dark corners of your house.. but all that can come later.
My 2nd question is: Can I move several 100 GB of old data that I rarely use onto the 3TB TC so that I could access the data from either computer whenever I need it, without having the data on either computer?
This is a lot harder question.. not in how to do it.. it is simple.. copy and paste files onto the new TC.. that is not the issue..
The problem is backup of the files that no longer exist on the computers. Ironically the TC is problematic for one major reason.. it cannot back itself up.. nor can Time Machine (TM) backup network drives. Even though TM uses the TC to store the backup it cannot actually work to backup the TC. The problems are not insurmountable.. you can use a third party backup.. eg CCC but it will be extremely slow. A better strategy if one of your computers is a desktop is to install an external drive and share it to the network. The data rate will be hugely better.. and TM can backup as per normal.

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Can I add a NAS via ethernet to the Time Capsule network?

"I'm a PC," but am sick of spending all my time with Windows/Network conflicts and am getting ready to take the plunge into the Mac world (insert applause here).
My router/switch is old, and I want "n" wireless capability, so my plan here is to go whole hog and buy a Macbook Pro, an iMac, and a brand new network infrastructure including the 2TB Time Capsule. This way I will stay completely within the Apple family.
I have a Netgear ReadyNAS 2TB that I would like to have available as a second back-up drive on the network. It can only be on the network via ethernet (LAN). It cannot be plugged into the Time Capsule's USB port.
Will I be able to add this drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Thanks for any help anyone can offer,
Shawn

BroncoCountry wrote:
Will I be able to add this [NAS] drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
It's reasonable to expect your NAS drive to work when connected to your Time Capsule network. However, it will be difficult for you to use it for Time Machine backups. Apple only supports Time Machine network backups to the disk in a Time Capsule.
It's easy to have multiple computers backing up via Time Machine to the same Time Capsule.
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
That's up to you. Keep in mind that Apple still doesn't want you to use that USB drive for Time Machine backups.
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Yes.

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

Can i add a normal usb driver?
Yes, but be sure that the drive is formatted correctly for Mac in Mac OS Extended (Journaled)
I will see it as an external drive in the time capsule network?
The drive will appear as a shared network drive, like the Time Capsule.
It will work as fast than time capsule?
No, the drive will operate at about half or 50% of the speed of the Time Capsule.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

How can i add the airport expres to my network, how can i add the airport expres to my network, how can i add the airport expres to my network

how can i add the airport expres to my network, how can i add the airport expres to my network, how can i add the airport expres to my network

elroiew wrote:
how can i add the airport expres to my network,
Best way for the first set up is to connect the Express via LAN cable to a computer.
Then enter the setup of the express and choose "Join a existing network"
After the setup is done, remove cable and you will see the Express in the Airport Utility
Lupunus

Can I add a network without joining it?

Can I add a network without joining it? I want to add my closed home networking setting to my iPhone from work.
Do I need to be in range of the network to add the network and its settings?
Thanks

No, you'll have to join a network to save the profile, so you'll have to be in range.

Can't add network printer to my PC

I have an HP Color LaserJet 2605dn connected thru a USB port to a 5-year old computer running XP Home Edition with SP-2. The printer is designated a shared computer. I also have a Linksys wireless home network that operates flawlessly in every respect except for the problem below.
When I try to add the printer to my new HP Pavilion running Vista Home Premium with SP-1 (64-bit), I get a message saying the server for the printer does not have the correct printer driver installed. When I pursue the "add printer" process to the bitter end, I get a Printer driver setup error (error Ox800f0214).
Can anyone tell me the name of the driver file that is missing, where I can find it, and how I can install it?

ON the Vista Home Premium x64 system go to Control Panel -->Printer --> select add printer and select network printer. Stop there. Now Click on the driver you downloaded from here. Once you begin the install with the exe file the wizard(that is already running) should see the driver and install it. Alternatively you could browse for it with \\computername\printername (substituting your own relevant network names for the devices)
Have you tried physically moving it and installing the printer at the x64 system and then phyically moving it back to the other system where you already have it installed? I know that beast is heavy.
Another option; Use universal extractor and extract the drivers from the.exe files. Then you can easily see which one will work when you extract themto a folder and browse there when you add the printer and the location of the driver is needed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I can't add my ITouch to the network

I am treying to add my ITouch and when I click on my network name and input the password I get the message "unable to Join the network". And when I try to add a device using Network magic it just keeps searching for the device. How to I add my ITouch to get linked to my CISCO wrt120n wireless home router? My Network Lock is not enabled.

The following information my help in answering my post.
Your Network Magic Version installed: 5.5.9195.0
The type of connection to the Internet: Cable
The Brand of Modem and its Model Number the router is connected to.Cisco Linksys WRT120N
The Method of connection your problem computer has to the Router: Wireless.
Include your location in the post or fill out your Profile for this forum and include the location. I am in Suffolk, VA

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I have a backup from about 4-5 months ago avaiable. Can I add/update contacts from the back up rather than restore which i assume will literally delete any new contacts added...?

I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable. I have a backup from about 4-5 months ago available on an external hdd as a time machine backup. Can I add/update contacts from the back up rather than restore? The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings. They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with. Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts. This is the work of facebook not mac/ios6 isnt it...? Any help here would be greatly apprecaited. I am about 2 days from flying to canada and having those contacts would make life a lot easier.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

My spooler won't stay running, I can't add printers.

My spooler won't stay running, I can't add printers.
Not able to figure out even after firewall on/off, network on/off and all setting to default...
Regards
Reddy

find some possibility solution for spooler wont start here
https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
I recommended this step
1. do printer troubleshooting
http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
2. Uninstall antivirus using removal tools (Kapersky)
3. Registry trick as
JSB43211 suggested, backup your registry before perform this
1. Open Regedit as Administrator
2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key.
3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86")
4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key
5. Start the Print Spooler service.
6. Test to see if you can Add a printer.

Can't add AX to TC network

Similar Messages

Maybe you are looking for