Can't add device N95 in iSync 3

I downloaded the Nokia plugin. Connected the N95 with USB then started iSync but it cannot find the device. Is there anything blatantly obvious that I have missed?

Hi. When you plug your phone in to your Mac, choose PC Suite on the N95 when it asks. That worked for me. I had the same problem because I was using the Data Transfer option instead of the PC Suite one
Good luck
Bob

Similar Messages

Can't add SonyEricsson W800i to isync devices?

When I try and add my W800i to isync devices via bluetooth it finds the device but says "This device is not supported by iSync"
The W800i is listed as a compatible device with iSync.
Any ideas on how to solve this problem?
PowerBook G4 12" Mac OS X (10.4.3)

Try to pair it first. If you've done that already, delete the device from isyc and/bluetooth system preferences and pair again.
Had the same problem and that solved it. Now sync is perfect.
good luck,
wolf

Can't add device

I am trying so hard to read and search all forums before posting...
Regarding this post:
http://discussions.apple.com/thread.jspa?messageID=672048&#672048
I think my conduits are set perfectly.
I can't add a device now. I have scanned, still nothing.
My T|E has not synced since my accidental hard re-set.
I have: re-installed iSync 2 from my original Mac OS X 10.4 Install using Pacifist, then updated it to iSync 2.3 using Mac OS X 10.4.8 Combo updater.
Everything looks good, except I can't add a device.

This is often an indication that your iSync Palm Conduit—simply labeled Apple, in the Finder—is installed in a unique, non-standard folder located here:
Macintosh HD:Library:Application Support:Palm HotSync
Usually, four folders appear at that level. They are named: Conduits, Disabled Conduits, Notifiers and Transports.
If a fifth folder labeled iSync Disabled Conduits appears, move its contents into the Disabled Conduits folder and discard the now empty iSync Disabled Conduits folder.
Your iSync Palm Conduit should be installed in the folder labeled Conduits. You may instead find that the iSync Palm Conduit is installed in a folder with another label, often a set of Japanese language characters. Move it from any such non-standard folder and into the active Conduits folder, discard the now empty non-standard folder, then launch the HotSync Manager or use the HotSync menu in the Palm Desktop to configure the conduit, and synchronize.

Can't add my Palm in iSync

I'm running iSync 3.0.2 and Hot Sync Manager 3.2.1 and I'm not able to either add my Palm in iSync or select the iSync conduct in HotSync Manager. Can someone could help me? Thanks in advance.

Hi,
if you are not using English as your default language, you may check the thread "iSync Conduit not visible in HotSync Conduit Manager" (last posts) - the mentioned workaround may help you, eventually...
- Andreas

Ho can i add devices to find my iphone that have different apple ID's, Ho can i add devices to find my iphone that have different apple ID's

Can anyone help me add devices to my find my iphone app like my dads iphone
p.s: we have different id's

You can just go to iCloud: Find My iPhone, sign in and and go to FIndMyiPhone.

Can't add my e815 to iSync

I just got a new Moto e815 (specifically b/c it is supposed to be supported by iSync). When I add a new device, iSync sees the e815, but says it is not supported.
Any ideas?

The Motorola E815 mobile handset was not initially supported by iSync 2, which if you are running Mac OS X 10.4.2, you are probably using. The answer: upgrade to at least Mac OS X 10.4.3 and iSync 2.1 to get support for your handset. [Current releases are Mac OS X 10.4.5 and iSync 2.1.1] Applying the Mac OS X 10.4.3 Combo updater will achieve both objectives, or you can update iSync 2 to 2.1 alone, as 2.1 requires only Mac OS X 10.4 to install.
Although these additional issues are not related to iSync, you should be aware of them if your handset is supplied by Verizon: You will not be able to transfer files to and from it as the OBEX profile is not supported, nor will you be able to use it to connect your computer to the internet, as it is a V CAST device and that technology is not compatible with the DUN profile.

Can not add nokia 6670 to isync after 10.4.7

with 10.4.6 it worked. Pairing no problem and also Adressbook was accessible. In 10.4.7 I can pair the phone with the mac, but only isync and internet acces are mentioned in the bluetoothe connection assistent.
when I open isync and trying to add a new device, it finds the phone with a "yellow button", but says it cannot add it because it canot esatblish a connection.
Does anyone have this problem, too?
thanks,
wolf

It did not work.
Deleted all the pairing. Paired again. (Adressbook
support was not mentioned again, only isync)
Restarted macbook and nokia. Tried to add it to isync
again. Isync said it can not connect to the Nokia
(yellow dot)
Not I don't know what else to do. It seemed to work
under 10.4.6.
Weird!
wolf
I have the same phone, a Mac Pro and an old G4 and am having the same problem and I know why. There are two versions of the Nokia 6670: a Nokia 6670 and a Nokia 6670b... we have the 6670b and it isn't supported by iSync.
On older versions of iSync, you could hack iSync to see the 6670b as a 6670 by adding a few lines of code but it doesn't work on the latest versions of iSync. On my old G4, I kept the last iSync version that worked, out of the Application folder to use and din't use the updated iSync in the Application folder that get's updated on every OS updates and security updates.
Now, zoom forward to last week when I got my Mac Pro... The UB iSync cannot be hacked and the old PowerPC iSync that worked won't work on the Mac Pro. So I need to remote control my old G4 and sync it with my phone, then sync the two computers. A serious PITA!

TS2972 i can't add devices to my iMac like ipad and now recently apple tv

my music loaded on my computer imac osx mountain lion does'nt always appear on my apple tv. The reason is on my apple tv under "Computers" my system network doesn't appear always. First day after setup it appeared but not today. I have firewall off and sharing preferences on (the mac) and "wake for network" on???????/ secondly I can't seem to add my apple tv to my devices on my mac. I also could never get my ipad to show up on my mac as a device although it is synced with the mac.???

Ejects the harddrive?
Of what did your old Mac die?
It sounds to me like you have some file corruption somewhere. Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting.

In synk, when I click "add device" instead of opening a window to enter the codes, it opens another firefox window and takes me to the help page for synk. [SOLVED]

I got a new laptop today and after downloading firefox I tried to use the synk feature and it says I have to add device on my old computer. In following the directions I never get to the screen to enter the codes from my new computer onto the old one. When I click add device on the old computer it takes me to the help page on the web with the same directions that took me there in the first place! So, how am I supposed to synk my new computer if I can't add device on the old or simply log in to my synk account on the new?

Ok, I figured it out, I clicked "i don't have device available" and it let me log in to my account.

Can I add a Windows tablet to my plan?

I want to buy a Windows Surfact Tablet, but I do not see the option to add it as a device to my plan. Is it supported?

Verizon can only add devices to a plan that have a VZW modem installed already. If it was not designed for the VZW network then you will have to consider a Jetpack or some other mobile broadband device to connect to VZW for you first.
For a list of currently supported tablets:
http://www.verizonwireless.com/b2c/device/tablet?&zipRdr=y
To check the compatibility of your non-supported tablet with the VZW plans:
http://www.verizonwireless.com/b2c/nso/enterDeviceId.do

Can I add my windows vaio to my i chat buddy list?

I have a sony vaio with a camera and would like to add it to my buddy list Is this possible. I have bonjour installed on the pc but don't know how to access it any help would be great.

Verizon can only add devices to a plan that have a VZW modem installed already. If it was not designed for the VZW network then you will have to consider a Jetpack or some other mobile broadband device to connect to VZW for you first.
For a list of currently supported tablets:
http://www.verizonwireless.com/b2c/device/tablet?&zipRdr=y
To check the compatibility of your non-supported tablet with the VZW plans:
http://www.verizonwireless.com/b2c/nso/enterDeviceId.do

How to add devices to my ADE account?

Hi there,
I have an old Nook Color from Barnes & Noble and used to transfer ebooks to this device. However, I bought 2 new Nooks HD but when I connect them to the computer, the ADE software does not recognize them (they don´t appear on the right side of the screen like the Nook Color does) so I am unable to transfer the ebooks. Question: how can I add devices to my ADE account in order to transfer ebooks from now on? Looking forward to hearing from you.

On the device, Settings > iTunes & App store.
Sign in with your AppleID.

Add Device sees wireless but printer is wired and can reach the HTTP page on wire

I installed my new Officejet 8000 Pro A809 with an ethernet but when I run the HP "Add Device" Wizard, it trys to install it as wireless even though I select wired and the install fails.
I can see the http page for the printer and it shows all sane information about my printer so I believe the ethernet is actually working.
I am running WinXP with the FW off. The printer is on the same switch as my PC & of course I can see the http page
In the wizard, although I selected "Wired" of course the wire is working, the "Found Network Printers" page shows that its connection is wireless. None-the-less I click next and a screen comes up for "Starting Network Services" & it rolls though topology, wireless strength, etc. and to sending an SLP request to the IP then it fails & shows an picture of a wireless signal and a big red X.
The HP Home Network Diagnostics Utility says that software to connect to printer over network is missing BUT I ran the Wizard all the way though a second time, I selected that my device was not online and it finished OK. I ran the UPDATE from the Utility & it did a security update; I rand it again and it did not find any.
Although my FW is off, I checked the ports that the FW Guide says are needed:
I can telenet to the printer on ports 9100 & 92200
I cannot telnet on ports 137,139 or 427
Ideas?
Thanks!
Larry Holt
This question was solved.
View Solution.

OK, plugging the Ethernet cable into the printer should turn off the printer's wireless radio, but in case it did not, click the button near the blue light (or go to Setup > Network > Turn off wireless radio on the front panel).
Now, don't bother with the Add Device wizard, let's just add it manually:
Verify that you can browse to the printer's internal web page by its IP address. If you cannot, disable your security system's firewall (not Windows firewall, it is usually not in the way).
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Why can't i add multiple email accounts to icloud mail, just like i can on my devices?

I am wondering, iCloud now has the iOS7 update and all the apps sync exactly the same way they do with my devices, even the app icons are identical. Then there is the Mail app, which doesnt allow me to "Add Accounts" from a third party like i can on my devices; making it useless for people like me with private domains. Even the Mail app icon is the same indicating that its the same as on devices, except it only allows you to use your @me and @icloud adress. Whats the deal?

adamhassig wrote:
I am wondering, iCloud now has the iOS7 update and all the apps sync exactly the same way they do with my devices, even the app icons are identical. Then there is the Mail app, which doesnt allow me to "Add Accounts" from a third party like i can on my devices; making it useless for people like me with private domains. Even the Mail app icon is the same indicating that its the same as on devices, except it only allows you to use your @me and @icloud adress. Whats the deal?
I'd just add that iCloud has nothing at all to do with iOS 7. iOS 7 is an operating system for Apple's mobile devices. iCloud is a distributed computing email and storage service running on Apple's server farms scattered around the globe. iCloud does not "run on iOS" and in fact has nothing at all to do with iOS or OS X.
Apple makes clients and applications to access iCloud services from iOS, OS X and windows, but iCloud itself has nothing to do with any of these.

How many devices can you add to icloud?

How many devices can you add to your icloud account?

How many devices can you add to your account?

Can't add device N95 in iSync 3

Similar Messages

Maybe you are looking for