Can't "add new address"

8 Gb iPhone v.1.1.2 Mac OS 10.4.10 iTunes 7.4.2
I'm having a problem with adding physical addresses to my contacts. In general, I sync my contacts via a group in address book. I noticed the issue when I was unable to access one of my contacts after a sync. What happened was that a physical street address was added to the contact in Address book, then synced to the phone. When I attempted to then call the contact some days later, upon pressing the contact to place the call, my phone would just jump back to the "home screen". After some investigation, I found that if I removed the street address from the contact in Address book, resync, I could then call the contact.
Digging deeper, I then accessed the particular contact via the iPhone, and tried to add the street address directly to the contact on the phone itself. When I edit the contact, then press the "Add new Address" button, again, my iPhone just returns to the home screen.
I then wondered if it was just this "poison" contact, or others as well. I've found that problem occurs in trying to add a street address to ANY existing contact on my phone, as well as any contact I add via address boot that has a street address. Upon pressing the "Add new Address" button, my iPhone just returns to the home screen.
A search of the apple discussions and google found no hints other than a reboot or soft reset, which I've tried. I'm still experiencing the same issues. Any suggestions here before I have to slough it over to a "genius" at an apple store, which isn't very close or convenient?
Regards and Happy Holidays.

Upgraded. Still having the same issue. What was that upgrade supposed to accomplish? iPhone software is still the same (latest version) and I still cannot add a physical address to any contact on my phone - via the phone GUI or importing / syncing from address book. Also, any contact that has a physical (street) address, I am unable to call because once selected in the phone UI, the UI just returns to the "home" screen as if I pressed the home button.

Similar Messages

  • I have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    i have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    Hi tizac,
    You will want to add them to your Contacts. 
    There's a "+" button at the bottom of the contact list on the left to add a contact.
    If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
    Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
    Send Message               FaceTime
    Share Contact             Add to Favorites
    Of course choose "Send Message" to send an iMessage to them and you will start a new chat.  You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
    ivan

  • Can't add new Address Book entries from Mail

    I can no longer add new contacts to the Address Book directly from Mail. I can go through the motions (right clicking on an email address brings up the appropriate options), but no new entry shows up in the Address Book. When I try to repeat the action, I can no longer "add" the entry, but instead it gives me the option of finding that entry. When I do that, it opens up the Address Book, but just defaults to the first entry. If I close and reopen Mail, it defaults back to the option of adding the entry again (as opposed to 'finding' it). Has anyone else seen this? (FYI, I can manually add entries to the Address Book just fine.)

    fredfx wrote:
    This IS a brand new system install and update. (less than 2 weeks).
    This hasn't worked since I did the new system install.
    That does not change my advice, whether you take it is up to you.

  • Can't add new address in 'contacts'

    Hi,
    As small, yet annoying problem: when I try to add a new contact to my contacts list all the text fields work fine, with one exception: filling in the address of the new contact simply doesn't work. The vertical bar fails to appear and nothing can be filled in. With older, existing contacts the already present addresses can be edited, this works as it should. Of course I've tried restarting, but this has no effect.  I've had this annoying problem since a couple of months now, the latest IOS upgrades/updates didn't change this.
    So it's only the address text field that is dysfunctional for me...
    My iPad 3 retina - IOS8.1.3 - has no further issues whatsoever
    Any suggestions?
    GJ

    Hello charlotte1,
    Welcome to the BlackBerry Support Community Forums.
    I would recommend checking the following knowledge base article.
    Link: http://www.blackberry.com/btsc/KB04370
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Can't add new MAC address to MAC ACL on Airport Express

    Hi,
    I just recently got a new iPhone 3GS. When I logged into my Airport Express to add it's MAC address to the ACL I found that the + icon was greyed out. I can modify old MAC addresses in the list and delete addresses, but I can't add new ones. Anyone have any idea why this might be the case. It seems like I can modify all other settings without any problems. I restarted the basestation, no help. I also even reset the password just incase, as you might expect that didn't help either. Any thoughts? Thanks.
    Setup:
    WDS with 2 other access points
    Mac Address Access Control set to "Local"

    If you are configuring the router as MGCP, you do not enter the mac address, just the router name.

  • Can't add new bookmarks

    Just recently I am unable to add new bookmarks. All my old ones are there, I just can't add new ones. Usually when I click "bookmark this page" a small black window pops up and allows me to determine which folder i'm going to save the page in, but the widow now doesn't even show up. The only page I CAN bookmark and this window shows up is on yahoo's homepage which made me notice something. There is a star in the address bar that gets filled in blue only when i'm on yahoo. Every other page, it becomes colorless. I'm not sure if that has anything to do with this or not though

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    Set up iCloud
    Set up iCloud (2)

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • My bookmarks have disappeared and I can't add new bookmarks.

    All my bookmarks have disappeared, including the defaults on the toolbar of most visited, etc. I can't add new bookmarks either. I have tried all the Help Topics on lost bookmarks. I tried restoring bookmark backups, but the backup from the date I lost bookmarks says "unable to process backup file." All the later dates will load, but they have no bookmarks saved in them. All of the other Help Topic attempts went fine but did not solve the problem.

    What I would say is that if you have any bookmarks at all at present that you make a manual backup of them, and then continue to make manual backups as any recovery efforts proceed.
    * see [[Backing up and restoring bookmarks]]
    There is a possibility that you had corrupt files, and may then have inadvertently overwritten any files that may have contained bookmarks. It is a good idea to make manual backups, for cases where the auto backups do not. work as expected.
    If you have already followed the instructions carefully about [[lost bookmarks]] and without resolving the situation, there may not be much you can do about your personal bookmarks. If they are important and you are willing to try there may be a possibility using file recovery software, &/or sqlite editors that something could be salvaged, but not something I can advise on, I am not currently a Mac user.
    The default bookmarks should be fairly easy to restore. You can probably also start the bookmarks working again. Trying the simplest options first:
    # work from [safe mode]
    #* at this stage when you see the first dialogue window with options do not make changes, press the continue button
    # use the customise / customize option from the toolbars and '''reset defaults'''
    #* Mac may differ from my Windows XP, I can right click bookmarks, or use the tools menu see [[How do I customize the toolbars?]]
    # if that has failed to resolve the problem go back to safe mode as in step 1 but this time use reset toolbars and controls.
    By now you should have the default bookmarks back and maybe the bookmarks work and will save new bookmarks, try it whilst still in safe mode, before going back to try in ordinary mode. If it works in safe mode but not in ordinary mode you probably have some add-on managing to cause problems
    If you still have problems and bookmarks will not save see [[bookmarks not saved]] that probably indicates corrupt places.sqlite &/or localstore.rdf the linked article explains how to find and delete them.

  • Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Install NTFS 3G
    http://macntfs-3g.blogspot.com/
    If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system.  However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
    I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • How can i add new tab in Business Partner

    hi every body,
    Present i am working on SAP CRM 3.0 version. i need to add new tab in BP.  Here EEWB not available. How can i add new tab?

    Hi  babu,
    you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence  and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
    now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
    i hope this is helpful
    Rewards points if helpful
    Thanks&regards
    kishore kumar

  • Can we  add new attachment outside SC(like from custom page on SoCo PO)  to existing SC ?

    Hi Experts,
    Need your expert advice on the below requirement.
    We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
    We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
    Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size,disp_url etc are not stored properly in DB.
    in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is new attachment is partially updated.
    Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
    I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content,phio_content of new attachment in existing attachment internal table and calling above FM for update.
    Can we  add new attachment outside SC to existing SC ? if yes , then how?
    Thanks,
    Partha

    Your attachments are saved in BBPCONT you can use below steps to check that , I think you can develop a solution inline to the standard architecture. 
    a) Run FM BBP_PD_XX_GETDETAIL
    b) Use GUID from the Export parameter ET_ATTACH-GUID
    c) Use table BBPCONT and pass ET_ATTACH-GUID in step (b) to PHIO_ID .
    d) Then you will have the document content.
    You will get the attachment
    Cheers
    Ankit Jain

  • How can i add new jcomponent to a frame?

    hi.
    how can we add new component to a frame? look at this code. Why when i click on button, nothing added to frame? event handled correctly and frame size changes but no button adds to frame.
    private void convertButtonMouseClicked(java.awt.event.MouseEvent evt) {
    // TODO add your handling code here:
    JButton newButton = new JButton("new");
    getContentPane().add(newButton , BorderLayout.CENTER);
    newButton.setVisible(true);
    setSize(500, 500);
    }

    Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
    Well typically you wouldn't add a button to the Center of a BorderLayout. If you really want to do this you should be using a [Card Layout|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html].
    In general the code for adding/removing components should be:
    panel.add(...)
    panel.revalidate();
    panel.repaint();

  • Ever since the last update I don't have my old bookmarks, can't add new ones and can't import my HTML file. How do I fix this?

    ever since the last firefox update I don't have my old bookmarks, can't add new ones and can't add my HTML file of my bookmarks

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Maybe you are looking for