Can't add new calendar entries after losing all calendar entries

I have asked about retrieving lost calendar entries that I had nothing to do with deleting.
Went to ICloud and there are no entries there, either, even though the calendar is turned on in Settings on my IPhone 5s.
I tried adding new entries to the calendar and it will not accept them.
What is up here?????

Hi,
I discovered the same yesterday when I tried to create a calendar item. Also got a weird bug on my iPad where in week / landscape mode I can't swipe right unless I swipe left a little and then get some momentum to swipe right.

Similar Messages

  • Can't add new GRUB entries thru /etc/grub.d/40_custom on MacBook Pro

    I am using Arch Linux on my MacBook Pro. The main bootloader is rEFInd, which then loads GRUB (in EFI mode) which in turns loads Linux. Of course rEFInd can also load OS X directly, but I am experimenting because I need OS X to be loaded by GRUB: some buggy hardware requires "outb" commands before booting the OS, and loading OS X through GRUB seems like the most natural way of doing it.
    I am using the automatic script in /boot/grub.d/ to generate the bootloader configuration, so I use the following commands:
    grub-mkconfig > /boot/grub/grub.cfg
    grub-mkstandalone -o boot.efi -d /usr/lib/grub/x86_64-efi -O x86_64-efi --compress=xz /boot/grub/grub.cfg
    They generate a new configuration and to create a new EFI image, which is then copied on a blessed boot partition. I am sure that the changes I make to the configuration file are put into effect, because I can (for instance) modify the kernel parameters for the default image and see the modified entry on the GRUB menu.
    Now I am trying to add a new configuration entry, the usual way would be by modifying /etc/grub.d/40_custom. I add the following lines:
    menuentry 'OS X (on /dev/sda2)' {
    insmod hfsplus
    insmod part_gpt
    set root='hd0,gpt2'
    chainloader /System/Library/CoreServices/boot.efi
    which are added correctly to /boot/grub/grub.cfg after I run grub-mkconfig as shown above. I also generate boot.efi as shown above, too, and I copy it on the boot partition.
    However when I reboot I cannot see the new entry in the GRUB menu. Is there something I am overlooking? Is there some way of troubleshooting GRUB when it's reading the configuration file? I think it may not like the syntax of the new entry I added.
    Last edited by zakk (2014-12-04 20:35:17)

    You should point grub-mkconfig to "your_efi_system_partition"/grub/grub.cfg instead of boot/grub/grub.cfg

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • How can i add new files to my ipod from a different computer  without losing the added files on my ipod?

    how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?

    Email them? Use DropBox?  What type of files?

  • Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

    I can't add new contacts after upgrading from Snow Leopard to Mountain last week.  I do not use iCloud.  Any suggestions?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

    my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

    You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
    Have you seen this.
    http://support.apple.com/kb/HT5796
    iCloud
    iOS 6 and later: Go to Settings > iCloud.
    If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
    If you're still signed in with your previous Apple ID:
    Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
    Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

  • Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

  • How to add new data entry and display old data in the same screen in SM30?

    Hi, Experts:
    We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
    How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
    Thanks,
    Jenny

    Hi, thanks for the reply!
    Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
    Thanks,
    Jenny

  • Can't add new Widgets to Dashboard on main user account

    I recently switched to a new MacBook Air and after the initial intstallation used migration assistent to move my old data to the MacBook Air. All works fine except the Dashboard. With the old useraccount (which is my main account) I can't add new widgets to the dashboard. When I download and install a new widget I can see it in the /user/library/widgets section, I can see it in the widget list in the dashboard but when I click on it or drag it up to the dashboard it closes the dashboard again.
    I tried adding a new user and in works fine in that new account.
    Here's what I did to try and solve it sofar:
    1. Repaired permissions
    2. Deleted the two .plist's in user/library/preferences
    3. Deleted the Cache in user/library/cache
    4. Checked the folder permissions in /user/library/widget and compared that with the newuser/library/widget
    5. Downloaded the 10.6.6. combo update and reinstalled
    This behaviour is with every new widget I tried to install.
    I tried to find similar behaviour using google but so far no luck. Any suggestions?

    You have hosed preferences in the main user account. Create a new admin user account, log into it, backup the bad account's folder, delete the bad account, selecting the save data option, recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
    See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

  • How can i add new identity in file option of menu bar

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/869755''
    how can i add new identity option in file option of menu bar

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • Can't add new datafile into a table space?

    Hi, Oraclers,
    I am learning Oracle. I found one problem: I can't add new datafile to an existing
    table space. I tried to add via OEM and SQLPlus. None of them works.
    I can see that the datafile, say ras01.dbf, is in my hard drive. But I can't see
    it via OEM datafile.
    Also, this datafile creating procedure has never stopped. In SQLPlus, after I
    submitte ths statement, after 7 days, this sql statement is still running. The
    same thing happened in OEM.
    The sql statement is:
    ALTER TABLESPACE "RASBLK"
    ADD
    DATAFILE
    'H:\ORACLE\PRODUCT\10.1.0\ORADATA\NMDATA\RAKBLK35.DBF' SIZE
    26214400K REUSE AUTOEXTEND
    ON NEXT 2048M MAXSIZE 30720M
    Oracle is 10g V10.1.0.2.0
    os is Window Server 2003 Service Pack 1.
    What's the problem?
    Thanks,
    Message was edited by:
    shinington

    so you have definitely tried to use a Winlows Server with NTFS for a 1TB++ Database ?
    I never heard of that and I wouldn't even dare to dream of that, but as stated above theoretically (that is: according to MS) this should work.
    But surely your process has crossed some internal limitations, at least that is what it looks like.
    I guess you must go to your %ORACLE_BASE%\admin\%SID%\bdump or udump directories to eventually find a trace file there.
    recommendation is: move to some kind of bigger system (Solaris,AIX).

  • Can not add new program unit in form

    We have a form developed using developer 6i in which we can not add new program units. If new program unit is added and form is saved and closed then after opening the form again, newly added program unit can not be seen in object navigator as well as it can not be found using search. Such form fails to compile as the calls for new program unit exists but the program unit is lost. The problem persists even if another copy of form is made using Save As option.
    What could be the reason of this problem?
    Thanks

    Hmmm... I have never had the problem. Two forms I have been working on lately are 1808 KB and 1424 KB. This is their compiled-and-saved size. Their "cleaned up" size is 792 KB and 604 KB.
    <p>Do you know about the semicolon - semicolon replacement trick for reducing fmb size? Read this thread:
    <br>    Re: FMB size shrinks dramatically
    <br>And a related thread:
        Re: Why does this happen - find ';', replace with ';'?
    <p>I sure wish Forms had a Preferences setting labelled:     Remove compiled code when saving.

  • I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    Set up iCloud
    Set up iCloud (2)

  • My laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!

    my laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!
    Please help!

    Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
    If it was set to Manual, you have no worries. Just continue on your way.
    If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
    You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

  • 'You can post in new year only after closing the previous year

    Hello Experts,
    I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
    I found one OSS Note 18800 and it is saying solution as below ...
    At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
    Up to 2.2D the following correction must also be installed:
    Please carry out the syntax check only in main program SAPLAFAR.
    But in my case there is no shortended fiscal year.
    Can I apply this OSS note correction instructions ?
    Please suggest me.

    Hi
    I don't think so. Moreover that is applicable till 2.2D.
    Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
    S Jayaram

Maybe you are looking for