Can't add new time in pop up menu template

Hope someone can help as I'm lost on this one. I am trying to use the schedule template in iworks09 but I need to add more time variations in the cell pop up menu. I enter the inspector pane for the particular cell and click into cells inspector which shows the pop up menu option with the various time options. When I click to edit the time or add a new time it won't allow me to save it with either AM or PM. This stops the daily hours formula from calculating the correct time worked. Is this a glitch in the program or am I missing something? I need to add 30 minute increments between 11:00 AM and 3:00 PM because according to apple nobody starts or finishes between these times! Any help would be greatly appreciated.

chabotlow,
This is a tricky template, believe me. Numbers is interpreting your pop-up entry as a DATE/TIME value, and apparently you have set your System Preferences > International to not use the AM and PM indicators, so Numbers is reformatting your entry.
The next problem that you are going to encounter is that all the other entries in the POP-UP have an un-displayed DATE of many days earlier, back when the template was designed. So, when you do the subtraction to find the elapsed work time, you will get a big surprise if your POP-UP data was entered on different days. If you want to change a few times on the POP-UP menu, you will have to change them all so that they all reflect the same DATE. That's not as bad as it may seem. Make one "IN" POP-UP and one "OUT" POP-UP. Then copy them to the rest of the table.
Regards,
Jerry

Similar Messages

How can I add new music to my iPhone from a new device without losing all the existing music?

Hello! My personal laptob that I usually use to sync my iPhone to is broke at the moment so, I've been syncing to my work computer. I have some music, not downloaded from iTunes, on the new computer that I'd like to add to my iPhone but I can't see how without iTunes deleting all my existing playlists and music from my iPhone. I can click the menu arrow on a song and then select "Add to" from the pop-up menu, then choose from "Devices" - Nathan Swain's iPhone - and it lets me, but nothing ever get's added to my iPhone. I have also authorized this computer on my iTunes account. I'm stumped!

By design, iPhone syncs or manually manages iTunes content with ONE computer at a time. Each time you switch computers, ALL iTunes content is first erased from your phone, to be replaced with the content from the new computer.
No way around this fact, other than transferring your content to the computer you normally sync with.

My bookmarks have disappeared and I can't add new bookmarks.

All my bookmarks have disappeared, including the defaults on the toolbar of most visited, etc. I can't add new bookmarks either. I have tried all the Help Topics on lost bookmarks. I tried restoring bookmark backups, but the backup from the date I lost bookmarks says "unable to process backup file." All the later dates will load, but they have no bookmarks saved in them. All of the other Help Topic attempts went fine but did not solve the problem.

What I would say is that if you have any bookmarks at all at present that you make a manual backup of them, and then continue to make manual backups as any recovery efforts proceed.
* see [[Backing up and restoring bookmarks]]
There is a possibility that you had corrupt files, and may then have inadvertently overwritten any files that may have contained bookmarks. It is a good idea to make manual backups, for cases where the auto backups do not. work as expected.
If you have already followed the instructions carefully about [[lost bookmarks]] and without resolving the situation, there may not be much you can do about your personal bookmarks. If they are important and you are willing to try there may be a possibility using file recovery software, &/or sqlite editors that something could be salvaged, but not something I can advise on, I am not currently a Mac user.
The default bookmarks should be fairly easy to restore. You can probably also start the bookmarks working again. Trying the simplest options first:
# work from [safe mode]
#* at this stage when you see the first dialogue window with options do not make changes, press the continue button
# use the customise / customize option from the toolbars and '''reset defaults'''
#* Mac may differ from my Windows XP, I can right click bookmarks, or use the tools menu see [[How do I customize the toolbars?]]
# if that has failed to resolve the problem go back to safe mode as in step 1 but this time use reset toolbars and controls.
By now you should have the default bookmarks back and maybe the bookmarks work and will save new bookmarks, try it whilst still in safe mode, before going back to try in ordinary mode. If it works in safe mode but not in ordinary mode you probably have some add-on managing to cause problems
If you still have problems and bookmarks will not save see [[bookmarks not saved]] that probably indicates corrupt places.sqlite &/or localstore.rdf the linked article explains how to find and delete them.

Can we add new attachment outside SC(like from custom page on SoCo PO) to existing SC ?

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size,disp_url etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is new attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content,phio_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Your attachments are saved in BBPCONT you can use below steps to check that , I think you can develop a solution inline to the standard architecture.
a) Run FM BBP_PD_XX_GETDETAIL
b) Use GUID from the Export parameter ET_ATTACH-GUID
c) Use table BBPCONT and pass ET_ATTACH-GUID in step (b) to PHIO_ID .
d) Then you will have the document content.
You will get the attachment
Cheers
Ankit Jain

Can't add new bookmarks

Just recently I am unable to add new bookmarks. All my old ones are there, I just can't add new ones. Usually when I click "bookmark this page" a small black window pops up and allows me to determine which folder i'm going to save the page in, but the widow now doesn't even show up. The only page I CAN bookmark and this window shows up is on yahoo's homepage which made me notice something. There is a star in the address bar that gets filled in blue only when i'm on yahoo. Every other page, it becomes colorless. I'm not sure if that has anything to do with this or not though

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Can we added new time info objects like cal quarter to the 0calyear

hi bw experts,
is it possible to add new time info objects as navigational attributes to the 0fiscperiod or 0 calyear?
Thanks and regards
pedamarla

Hi Pedamarla
As our friendz said itz not feasiable to distrub the standard time chars at all. so typically what you can do is u have to include the copy of the time char and use two different chars to achive example if you copied the fiscalyer char and maintain the data in that and parlelly you can include one more char and palce a routine/formula to achieve the cal quarter..
Hope its clear a little..!
Thanks
K M R
"Make everything as simple as possible, but not simpler." Albert
Einstein.
>
pedamarla wrote:
> hi bw experts,
>
> is it possible to add new time info objects as navigational attributes to the 0fiscperiod or 0 calyear?
>
> Thanks and regards
> pedamarla

I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.

It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

Team,
We are using SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help. The MDS installed and configured on SAME Machine (MyServer).
I have two issues here.
1. MDM website can not Identify the local Users (MyServer\MyUser).
The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
2. Can not add new user in Existing working MDM.
I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

Now I Solved this problem in my case.
I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
Hope, it will help

How can i add new tab in Business Partner

hi every body,
Present i am working on SAP CRM 3.0 version. i need to add new tab in BP. Here EEWB not available. How can i add new tab?

Hi babu,
you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
i hope this is helpful
Rewards points if helpful
Thanks&regards
kishore kumar

How can i add new jcomponent to a frame?

hi.
how can we add new component to a frame? look at this code. Why when i click on button, nothing added to frame? event handled correctly and frame size changes but no button adds to frame.
private void convertButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
JButton newButton = new JButton("new");
getContentPane().add(newButton , BorderLayout.CENTER);
newButton.setVisible(true);
setSize(500, 500);
}

Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
Well typically you wouldn't add a button to the Center of a BorderLayout. If you really want to do this you should be using a [Card Layout|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html].
In general the code for adding/removing components should be:
panel.add(...)
panel.revalidate();
panel.repaint();

Ever since the last update I don't have my old bookmarks, can't add new ones and can't import my HTML file. How do I fix this?

ever since the last firefox update I don't have my old bookmarks, can't add new ones and can't add my HTML file of my bookmarks

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Can't add new time in pop up menu template

Similar Messages

Maybe you are looking for