Can't Add Photos Edited in PS

I did some editing of photos in PS CS and saved as JPG's but when I try to import them into iPhoto, I get the 'file type not recognized' error.
Whats the deal?

saved directly to the HD
On you Mac and where on the HD? If they are somewhere inside the iPhoto Library folder they cannot be imported by iPhoto. You will have to move them out of that folder before they can be imported.

Similar Messages

  • After updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    At last, the BEST solution!
    In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
    It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
    Basically you just need to follow these steps from the Settings page:
    Enable Airplane Mode
    Go to iCloud settings
    Turn on Contacts
    Agree to 'Merge Contact'
    Wait for pop up to confim iCloud contacts are on
    Turn off Contacts
    Confirm that you want to Keep your Contact on the iPhone
    Wait for pop up to confim iCloud contacts are off
    Disable Airplane Mode
    Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
    Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine.

  • Can I add photo stream albums to SkyDrive

    Can I add photo stream albums to my SkyDrive albums?

    Welcome to the Apple Community.
    Photos in the camera roll are those which (in most cases) are taken on the device, the photostream album contains photos which have been synced from photostream in the cloud, which can include photos from your camera roll as well as from other devices using photostream. Photostream photos can be lower resolution than the same photos in the camera roll.
    Photos in photostream can be edited and saved to other albums.

  • Can I add or edit Keywords and captions from within the Map module?

    I frequently find a need to edit or add to the caption while reviewing  and geotagging photos in the Map module.  Constantly toggling between modules is inconvenient.  Is there a way to add/edit captions or keywords while working in the Map module  (or view the map module while working in the Library?
    Thanks!
    Steve

    thank you
          From: Modesto Vega <[email protected]>
    To: Steve Murray <[email protected]>
    Sent: Thursday, January 29, 2015 3:27 PM
    Subject:  Can I add or edit Keywords and captions from within the Map module?
    Can I add or edit Keywords and captions from within the Map module?
    created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Text editing  - can you add text editing options on the 'in-browser editing'

    Text editing  - can you add text editing options on the 'in-browser editing' tool?

    You can only replace existing content, not edit the page structure. Refer to the respective help sections.
    Mylenium

  • How can I add photos from Camera Roll to the Photo Stream album?

    How can I add photos taken during the past month from my Camera Roll to the Photo Stream album?

    Hi,
    It's easy to do in iPhoto11 (click on a photo in iphoto and select share in the bottom right corner, then select Photo Stream), I'm not sure you can do this on the iphone.
    Regards
    Keith

  • HT1848 How can I add photos to the iPad while not deleting any currently on it? I have some photos from my brother's camera that I can't get again.  How could save them onto my iMac?

    I have uploaded photos from my brother's camera while on vacation to my iPad (1).  Now that I wish to add even more photos to the iPad,  iTunes say that it will replace all the photos once I sync again to add from an album on the iMac.
    WHOA.
    I'd like to upload the photos to the iMac! HOw can I do that?
    How can I add photos from albums on the iMac and not lose the ones I currently have stored onthe iPad.
    I cannot find this task addressed in any Help reference.
    I do not understand why I cannot make a simple file transfer back and forth.
    Many thanks!

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

  • How can I add photos in the Camera roll to My photo stream if they were taken prior to icloud being activated?

    How can I add photos in the Camera roll to My photo stream if they were taken prior to icloud being activated?

    You have a couple of options:
    Open the photos one at a time and take a screenshot.  This will add a new low resolution copy of the photo to the camera roll, which will then upload to your photo stream;
    Email the photos one at a time to yourself, then save the attached photos to your camera roll.  This will add a copy of the photo at full resolution to your camera roll and upload to photo stream;
    Use an app like PhotoSync, which will allow you to wirelessly transfer copies of all your old photos to your computer all at once.  Then delete these photos from your camera roll and use PhotoSync to transfer them back from your computer to your camera roll.  These will be the original resolution and will upload to your photo stream.  (You need an app like this because iTunes will not transfer photos back to your camera roll, where they must be in order to add to your photo stream.)

  • Can't add photos to nano

    I just got my black 4gig a couple hours ago and I love it, I got music added to it all right but I have 27 MB left and I can't add photos to it.
    I get through all the steps and select about 6 photos to add (not full size) but then I get an error message saying my iPod cannot be updated (error -208). I installed the software and did iPod update and I have iPhoto 4.0.3
    Any suggestions please?

    Please be patient - I am not trying to mess you up.
    From the nano specs online:
    "Mac system requirements:
    Mac OS X v10.3.4 or later"
    Your signature says your running OS X 10.0.x, so you might need to upgrade your OS (key word MIGHT).
    From the nano manual (see link below):
    "You can download photos from a folder on your hard disk. If you have a Mac and iPhoto 4.0.3 or later, you can download iPhoto albums automatically. " - You should be OK on your iPhoto version from the version you said you are currently running.
    Try dragging a couple of photos from your iPhoto library to a folder on your computer. Then try to add the photos to your iPod with the alternative method of selecting photos using the 'From Folder' option and use the folder/photos you have set aside.
    See if you can then add them this way or get the same error.
    Online reference (just in case you need it):
    http://manuals.info.apple.com/en/iPodnano_FeaturesGuide.pdf
    See chapter 3.
    Best of luck,
    Polartek

  • How can i add photos to my favorites

    how can i add photos to my favorites contacts

    It's all in the manual: http://manuals.info.apple.com/en/iphoneuserguide.pdf

  • How can I add photos to my iPhone?

    How can I add photos to my iPhone 3GS? I used to do it on my 2G, now I can't seem to remember how.

    It's all in the manual: http://manuals.info.apple.com/en/iphoneuserguide.pdf

  • HT5824 how can i add and edit my contatcs from my iphone

    Hello please help me ..
    how can i add and edit my contatcs from my iphone

    Hello there ttikkiscy,
    It sounds like you would like to know how to add to and edit your iCloud Contacts. First make sure you are using the iCloud Contacts function with this article:
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn on or off iCloud features.
    Once that is turned on and you can see your contacts in the Contacts app, use this part of the iPhone Basics guide here http://support.apple.com/kb/TI138
    Create and edit a contact.
    In Contacts, tap + to pull up a new contact card. Enter the person’s info and tap Done.
    To edit a contact, pull up the card and tap Edit. Make your changes and tap Done to save.
    To delete, scroll down, and tap Delete Contact.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can I add photos to a video without interrupting the sound of the original video?

    In PE11, How can I add photos to a video without interrupting the sound of the original video?

    RLHeflin
    Thanks for getting your details posted. Good job.
    You further explained
    I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
    A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
    If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
    A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
    Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
    http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
    Please update us on your progress when you get a chance.
    Thank you.
    ATR

  • Can not add or Edit in Address book

    please help.
    i can not add or Edit any thing on address book
    Erro i am getting as below.
    Uncaught Exception :
    Application
    net_rim_bb_addressbook_app (232) is not responding;
    process terminated
    Pls let me know what to do now.
    Thanks
    VInod

    Hello Vinod and welcome to the Community!
    Please remove Yahoo! Messenger or Windows Live Messenger for the meantime until a new update has been released because one of these apps' newly updated version is causing the issue to most OS5 phones...
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Maybe you are looking for

  • Goods Receipt at 2 levels

    Hi Guys, We have a unique requirement for our client. They normally imort their goods from China. In the legacy system they recognize the goods receipt in two stages. When the goods are received at the Frieght Forwarder, they post a goods receipt whe

  • Time Machine Migration Assistant?

    Right now I'm running on an old white model macbook and plan on buying a 27" iMac tomorrow and was wondering if I was to use migration assistant with my time machine back up would that over write everything on the new iMac? like the iLife '10 suite?

  • Audio from apps stays on when answering a call

    Prior to the update to 4.1.2 build JZ054K.I535VRBMF1, when a call would come in and I was listening to audio through a streaming app like Sirius or MLB At Bat, the audio would turn off until I was off the call.  Now, when I pick up the call, the audi

  • Explain Time Zone Support?

    Time zone support boggles me and I think Apple's approach is counter-intuitive for that. It shouldn't be so hard. I make my appointments in MST zone while I work in CST. Calendar (computer) is set to CST also. I travel to MST and find my appointments

  • How to receive the items in purchasing in Fusion

    Hi, I created a Purchase Order and approved it. ( there is No Requisition created) I went to receiving from (Navigator->Under Procurements, there is Receipts). and when i queried by the above created Purchase Order, Its not showing anything. Can you