Can't add server on netBean

hi all,
my desktop died yesterday, try hard, can't reboot it , today try install everythind on other desktop, when I install Nebean 6.5 , when I click add server the chose server did not pop up, or I can said click add server ,not respone at all.
what is the problem??
Thank you!

so either ask Netbeans support, or go to
Developers Forum -> Whatever -> Sun One Application Server
and ask there.

Similar Messages

Can't add server to DAG cluster.

I have two servers in a cluster, but when I add our main mail server I get the following error.
All of the servers have two NIC's which the same configuration with two networks.
I can create a DAG with this server alone, but when I add another one, I get this message.
All three servers have the same DNS settings.
add-databaseavailabiltygroupserver started on machine EXCHANGE.
[2009-12-25T01:52:25] add-dagserver started
[2009-12-25T01:52:25] commandline: $scriptCmd = {& $wrappedCmd @PSBoundParameters }
[2009-12-25T01:52:25] Option 'Identity' = 'dage'.
[2009-12-25T01:52:25] Option 'MailboxServer' = 'exchange'.
[2009-12-25T01:52:25] Option 'DatabaseAvailabilityGroupIpAddresses' = ''.
[2009-12-25T01:52:25] Option 'WhatIf' = ''.
[2009-12-25T01:52:25] Process: w3wp w3wp.exe:1368.
[2009-12-25T01:52:25] User context = 'NT AUTHORITY\SYSTEM'.
[2009-12-25T01:52:25] Member of group 'Everyone'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\Users'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\SERVICE'.
[2009-12-25T01:52:25] Member of group 'CONSOLE LOGON'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\Authenticated Users'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\This Organization'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\IIS_IUSRS'.
[2009-12-25T01:52:25] Member of group 'LOCAL'.
[2009-12-25T01:52:25] Member of group 'IIS APPPOOL\MSExchangePowerShellAppPool'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\Administrators'.
[2009-12-25T01:52:25] Updated Progress 'Validating the parameters.' 2%.
[2009-12-25T01:52:25] Working
[2009-12-25T01:52:25] Mailbox server: value passed in = exchange, mailboxServer.Name = EXCHANGE, mailboxServer.Fqdn = EXCHANGE.acsi.com
[2009-12-25T01:52:25] LogClussvcState: clussvc is Stopped on EXCHANGE.acsi.com. Exception (if any) = none
[2009-12-25T01:52:25] The IP addresses for the DAG are (blank means DHCP):
[2009-12-25T01:52:25] Looking up IP addresses for DAGE.
[2009-12-25T01:52:28] Failure while trying to resolve DAGE: threw a SocketException: The requested name is valid, but no data of the requested type was found.
[2009-12-25T01:52:28] Looking up IP addresses for exchange.
[2009-12-25T01:52:28] exchange = [ fe80::1898:2778:f04d:d646%11, fe80::4984:510e:1fea:fb92%12, 2002:c701:63d2::c701:63d2, 199.1.99.210, 10.10.1.210 ].
[2009-12-25T01:52:28] Looking up IP addresses for EXCHANGE.acsi.com.
[2009-12-25T01:52:28] EXCHANGE.acsi.com = [ fe80::1898:2778:f04d:d646%11, fe80::4984:510e:1fea:fb92%12, 2002:c701:63d2::c701:63d2, 199.1.99.210, 10.10.1.210 ].
[2009-12-25T01:52:28] DAG DAGE has 2 servers:
[2009-12-25T01:52:28] DAG DAGE contains server EXCHANGE2.
[2009-12-25T01:52:28] DAG DAGE contains server EXCHANGE3.
[2009-12-25T01:52:28] Updated Progress 'Checking if Mailbox server 'EXCHANGE' is in a database availability group.' 4%.
[2009-12-25T01:52:28] Working
[2009-12-25T01:52:28] GetRemoteCluster() for the mailbox server failed with exception = An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(EXCHANGE.acsi.com) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. This is OK.
[2009-12-25T01:52:28] Ignoring previous error, as it is acceptable if the cluster does not exist yet.
[2009-12-25T01:52:28] DumpClusterTopology: Opening remote cluster DAGE.
[2009-12-25T01:52:28] DumpClusterTopology: Failed opening with Microsoft.Exchange.Cluster.Replay.AmGetFqdnFailedNotFoundException: An Active Manager operation failed with a transient error. Please retry the operation. Error: A transient error occurred during discovery of the database availability group topology. Error: The fully qualified domain name for node 'DAGE' could not be found.
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.<>c__DisplayClass1.<ResolveFqdn>b__0(Object , EventArgs )
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.RunADOperationEx(EventHandler ev)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.ResolveFqdn(String shortNodeName)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.GetFqdn(String shortNodeName)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerName..ctor(String serverName)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.DumpClusterTopology..ctor(String nameCluster, ITaskOutputHelper output)
[2009-12-25T01:52:28] Dumping the cluster by connecting to: DAGE.
[2009-12-25T01:52:28] DumpClusterTopology: Not dumping, since the cluster could not be contacted.
[2009-12-25T01:52:28] Opening the cluster on nodes [exchange2, exchange3].
[2009-12-25T01:52:28] Other mailbox servers in the DAG are already members of cluster 'DAGE'
[2009-12-25T01:52:28] The server EXCHANGE does not belong to a cluster, and the other servers belong to DAGE.
[2009-12-25T01:52:29] Successfully resolved servers based on the AD configuration.
[2009-12-25T01:52:29] The following servers are in the StartedServers list:
[2009-12-25T01:52:29] The following servers are in the StoppedServers list:
[2009-12-25T01:52:29] Verifiying that the members of database availability group 'DAGE' are also members of the cluster.
[2009-12-25T01:52:29] Verifying that the members of cluster 'DAGE' are also members of the database availability group.
[2009-12-25T01:52:29] According to GetNodeClusterState(), the server EXCHANGE is NotConfigured.
[2009-12-25T01:52:29] The CNO is currently Offline.
[2009-12-25T01:52:29] The network name 'DAGE' is not online. Please check that the IP address configuration of the Database Availability Group is correct.
[2009-12-25T01:52:29] InternalValidate() done.
[2009-12-25T01:52:29] Updated Progress 'Adding server 'EXCHANGE' to database availability group 'DAGE'.' 6%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:52:29] Updated Progress 'Adding server 'EXCHANGE' to the cluster.' 8%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:53:12] The following log entry comes from a different process, run on machine 'exchange3.acsi.com'. BEGIN
[2009-12-25T01:53:12] [2009-12-25T01:52:29] Opening a local AmCluster handle.
[2009-12-25T01:52:29] Updated Progress 'Adding server 'exchange' to database availability group 'DAGE'.' 2%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:52:29] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseStart, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x0 )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseContinue, ePhaseSeverity = ClusterSetupPhaseFatal, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x800713bb )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseEnd, ePhaseSeverity = ClusterSetupPhaseFatal, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x800713bb )
[2009-12-25T01:53:11] Found a matching exception: Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException: A server-side database availability group administrative operation failed. Error: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server.
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseFailureCleanup, ePhaseType = ClusterSetupPhaseStart, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x0 )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseFailureCleanup, ePhaseType = ClusterSetupPhaseEnd, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = , dwStatus = 0x0 )
[2009-12-25T01:53:12] The preceding log entry comes from a different process, run on machine 'exchange3.acsi.com'. END
[2009-12-25T01:53:12] The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2009-12-25_01-52-25.205_add-databaseavailabiltygroupserver.log".
[2009-12-25T01:53:12] WriteError! Exception = Microsoft.Exchange.Cluster.Replay.DagTaskOperationFailedException: A server-side database availability group administrative operation failed. Error: The operation failed with message: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server. ---> Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException: A server-side database availability group administrative operation failed. Error: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server.
   at Microsoft.Exchange.Cluster.ClusApi.AmCluster.AddNodeToCluster(AmServerName nodeName, IClusterSetupProgress setupProgress, IntPtr context, Exception& errorException, Boolean throwExceptionOnFailure)
   at Microsoft.Exchange.Cluster.Replay.DagHelper.AddDagClusterNode(AmServerName mailboxServerName, String& verboseLog)
   --- End of inner exception stack trace (Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException) ---
   at Microsoft.Exchange.Cluster.Replay.DagHelper.ThrowDagTaskOperationWrapper(Exception exception)
   at Microsoft.Exchange.Cluster.Replay.DagHelper.AddDagClusterNode(AmServerName mailboxServerName, String& verboseLog)
   at Microsoft.Exchange.Cluster.ReplayService.ReplayRpcServer.<>c__DisplayClass34.<RpcsAddNodeToCluster>b__33()
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String databaseName, RpcServerOperation rpcOperation)
   --- End of stack trace on server (exchange3.acsi.com) ---
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String serverName, RpcErrorExceptionInfo errorInfo)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunRpcOperationDbName(String serverName, String databaseName, Int32 timeoutMs, ReplayRpcClient& rpcClient, IHaRpcExceptionWrapper rpcExceptionWrapperInstance, InternalRpcOperation rpcOperation)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunRpcOperation(String serverName, Nullable`1 dbGuid, Int32 timeoutMs, ReplayRpcClient& rpcClient, IHaRpcExceptionWrapper rpcExceptionWrapperInstance, InternalRpcOperation rpcOperation)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunAddNodeToCluster(AmServerName serverName, AmServerName newNode, String& verboseLog)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.AddDatabaseAvailabilityGroupServer.JoinNodeToCluster()
[2009-12-25T01:53:12] Updated Progress 'Done!' 100%.
[2009-12-25T01:53:12] COMPLETED
add-databaseavailabiltygroupserver explicitly called CloseTempLogFile().

1. I don't think I have a disjoint. There is only one domain and every server has the same primary dns suffix.
2. This is the server that cannot be added. Can only be added to a group itself:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : EXCHANGE
   Primary Dns Suffix . . . . . . . : acsi.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : acsi.com
Ethernet adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
   Physical Address. . . . . . . . . : 02-1E-C9-45-A7-EA
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
   Physical Address. . . . . . . . . : 00-1E-C9-45-A7-EB
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.1.210(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.1.1
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.10
   199.1.99.20
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-1E-C9-45-A7-EA
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 199.1.99.210(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.10
   199.1.99.20
   NetBIOS over Tcpip. . . . . . . . : Enabled
This is one of the two that is in a functional group:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : exchange2
   Primary Dns Suffix . . . . . . . : acsi.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : acsi.com
Ethernet adapter Local Area Connection* 9:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
   Physical Address. . . . . . . . . : 02-11-43-04-82-5C
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 169.254.1.39(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Connection
   Physical Address. . . . . . . . . : 00-11-43-04-82-5C
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 199.1.99.212(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   IPv4 Address. . . . . . . . . . . : 199.1.99.154(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.10
   199.1.99.20
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-10-18-5A-7D-38
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.1.212(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.1.1
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.20
   199.1.99.10
   NetBIOS over Tcpip. . . . . . . . : Enabled
And the other one that's part of the group that's working:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : exchange3
   Primary Dns Suffix . . . . . . . : acsi.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : acsi.com
Ethernet adapter Local Area Connection* 10:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
   Physical Address. . . . . . . . . : 02-0C-29-95-A5-BD
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 169.254.2.159(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection #2
   Physical Address. . . . . . . . . : 00-0C-29-95-A5-C7
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.10.1.214(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.10.1.1
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.10
   199.1.99.20
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
   Physical Address. . . . . . . . . : 00-0C-29-95-A5-BD
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 199.1.99.214(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 199.1.99.30
   199.1.99.10
   199.1.99.20
   NetBIOS over Tcpip. . . . . . . . : Enabled
3. I have both networks setup as the replication network. Is this a problem?
4. Every server can ping every other network address of these three servers.
5. Here's the log:
add-databaseavailabiltygroupserver started on machine EXCHANGE.
[2009-12-25T01:52:25] add-dagserver started
[2009-12-25T01:52:25] commandline: $scriptCmd = {& $wrappedCmd @PSBoundParameters }
[2009-12-25T01:52:25] Option 'Identity' = 'dage'.
[2009-12-25T01:52:25] Option 'MailboxServer' = 'exchange'.
[2009-12-25T01:52:25] Option 'DatabaseAvailabilityGroupIpAddresses' = ''.
[2009-12-25T01:52:25] Option 'WhatIf' = ''.
[2009-12-25T01:52:25] Process: w3wp w3wp.exe:1368.
[2009-12-25T01:52:25] User context = 'NT AUTHORITY\SYSTEM'.
[2009-12-25T01:52:25] Member of group 'Everyone'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\Users'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\SERVICE'.
[2009-12-25T01:52:25] Member of group 'CONSOLE LOGON'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\Authenticated Users'.
[2009-12-25T01:52:25] Member of group 'NT AUTHORITY\This Organization'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\IIS_IUSRS'.
[2009-12-25T01:52:25] Member of group 'LOCAL'.
[2009-12-25T01:52:25] Member of group 'IIS APPPOOL\MSExchangePowerShellAppPool'.
[2009-12-25T01:52:25] Member of group 'BUILTIN\Administrators'.
[2009-12-25T01:52:25] Updated Progress 'Validating the parameters.' 2%.
[2009-12-25T01:52:25] Working
[2009-12-25T01:52:25] Mailbox server: value passed in = exchange, mailboxServer.Name = EXCHANGE, mailboxServer.Fqdn = EXCHANGE.acsi.com
[2009-12-25T01:52:25] LogClussvcState: clussvc is Stopped on EXCHANGE.acsi.com. Exception (if any) = none
[2009-12-25T01:52:25] The IP addresses for the DAG are (blank means DHCP):
[2009-12-25T01:52:25] Looking up IP addresses for DAGE.
[2009-12-25T01:52:28] Failure while trying to resolve DAGE: threw a SocketException: The requested name is valid, but no data of the requested type was found.
[2009-12-25T01:52:28] Looking up IP addresses for exchange.
[2009-12-25T01:52:28] exchange = [ fe80::1898:2778:f04d:d646%11, fe80::4984:510e:1fea:fb92%12, 2002:c701:63d2::c701:63d2, 199.1.99.210, 10.10.1.210 ].
[2009-12-25T01:52:28] Looking up IP addresses for EXCHANGE.acsi.com.
[2009-12-25T01:52:28] EXCHANGE.acsi.com = [ fe80::1898:2778:f04d:d646%11, fe80::4984:510e:1fea:fb92%12, 2002:c701:63d2::c701:63d2, 199.1.99.210, 10.10.1.210 ].
[2009-12-25T01:52:28] DAG DAGE has 2 servers:
[2009-12-25T01:52:28] DAG DAGE contains server EXCHANGE2.
[2009-12-25T01:52:28] DAG DAGE contains server EXCHANGE3.
[2009-12-25T01:52:28] Updated Progress 'Checking if Mailbox server 'EXCHANGE' is in a database availability group.' 4%.
[2009-12-25T01:52:28] Working
[2009-12-25T01:52:28] GetRemoteCluster() for the mailbox server failed with exception = An Active Manager operation failed. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(EXCHANGE.acsi.com) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. This is OK.
[2009-12-25T01:52:28] Ignoring previous error, as it is acceptable if the cluster does not exist yet.
[2009-12-25T01:52:28] DumpClusterTopology: Opening remote cluster DAGE.
[2009-12-25T01:52:28] DumpClusterTopology: Failed opening with Microsoft.Exchange.Cluster.Replay.AmGetFqdnFailedNotFoundException: An Active Manager operation failed with a transient error. Please retry the operation. Error: A transient error occurred during discovery of the database availability group topology. Error: The fully qualified domain name for node 'DAGE' could not be found.
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.<>c__DisplayClass1.<ResolveFqdn>b__0(Object , EventArgs )
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.RunADOperationEx(EventHandler ev)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.ResolveFqdn(String shortNodeName)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerNameCache.GetFqdn(String shortNodeName)
   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmServerName..ctor(String serverName)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.DumpClusterTopology..ctor(String nameCluster, ITaskOutputHelper output)
[2009-12-25T01:52:28] Dumping the cluster by connecting to: DAGE.
[2009-12-25T01:52:28] DumpClusterTopology: Not dumping, since the cluster could not be contacted.
[2009-12-25T01:52:28] Opening the cluster on nodes [exchange2, exchange3].
[2009-12-25T01:52:28] Other mailbox servers in the DAG are already members of cluster 'DAGE'
[2009-12-25T01:52:28] The server EXCHANGE does not belong to a cluster, and the other servers belong to DAGE.
[2009-12-25T01:52:29] Successfully resolved servers based on the AD configuration.
[2009-12-25T01:52:29] The following servers are in the StartedServers list:
[2009-12-25T01:52:29] The following servers are in the StoppedServers list:
[2009-12-25T01:52:29] Verifiying that the members of database availability group 'DAGE' are also members of the cluster.
[2009-12-25T01:52:29] Verifying that the members of cluster 'DAGE' are also members of the database availability group.
[2009-12-25T01:52:29] According to GetNodeClusterState(), the server EXCHANGE is NotConfigured.
[2009-12-25T01:52:29] The CNO is currently Offline.
[2009-12-25T01:52:29] The network name 'DAGE' is not online. Please check that the IP address configuration of the Database Availability Group is correct.
[2009-12-25T01:52:29] InternalValidate() done.
[2009-12-25T01:52:29] Updated Progress 'Adding server 'EXCHANGE' to database availability group 'DAGE'.' 6%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:52:29] Updated Progress 'Adding server 'EXCHANGE' to the cluster.' 8%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:53:12] The following log entry comes from a different process, run on machine 'exchange3.acsi.com'. BEGIN
[2009-12-25T01:53:12] [2009-12-25T01:52:29] Opening a local AmCluster handle.
[2009-12-25T01:52:29] Updated Progress 'Adding server 'exchange' to database availability group 'DAGE'.' 2%.
[2009-12-25T01:52:29] Working
[2009-12-25T01:52:29] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseStart, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x0 )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseContinue, ePhaseSeverity = ClusterSetupPhaseFatal, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x800713bb )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseValidateNodeState, ePhaseType = ClusterSetupPhaseEnd, ePhaseSeverity = ClusterSetupPhaseFatal, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x800713bb )
[2009-12-25T01:53:11] Found a matching exception: Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException: A server-side database availability group administrative operation failed. Error: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server.
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseFailureCleanup, ePhaseType = ClusterSetupPhaseStart, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = EXCHANGE, dwStatus = 0x0 )
[2009-12-25T01:53:11] ClusterSetupProgressCallback( eSetupPhase = ClusterSetupPhaseFailureCleanup, ePhaseType = ClusterSetupPhaseEnd, ePhaseSeverity = ClusterSetupPhaseInformational, dwPercentComplete = 12, szObjectName = , dwStatus = 0x0 )
[2009-12-25T01:53:12] The preceding log entry comes from a different process, run on machine 'exchange3.acsi.com'. END
[2009-12-25T01:53:12] The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2009-12-25_01-52-25.205_add-databaseavailabiltygroupserver.log".
[2009-12-25T01:53:12] WriteError! Exception = Microsoft.Exchange.Cluster.Replay.DagTaskOperationFailedException: A server-side database availability group administrative operation failed. Error: The operation failed with message: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server. ---> Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException: A server-side database availability group administrative operation failed. Error: Windows Failover Clustering timed out while trying to validate server 'EXCHANGE'. If this is in a disjoint DNS namespace, the DNS suffixes for all servers in the database availability group must be present on every server.
   at Microsoft.Exchange.Cluster.ClusApi.AmCluster.AddNodeToCluster(AmServerName nodeName, IClusterSetupProgress setupProgress, IntPtr context, Exception& errorException, Boolean throwExceptionOnFailure)
   at Microsoft.Exchange.Cluster.Replay.DagHelper.AddDagClusterNode(AmServerName mailboxServerName, String& verboseLog)
   --- End of inner exception stack trace (Microsoft.Exchange.Cluster.Replay.DagTaskValidateNodeTimedOutException) ---
   at Microsoft.Exchange.Cluster.Replay.DagHelper.ThrowDagTaskOperationWrapper(Exception exception)
   at Microsoft.Exchange.Cluster.Replay.DagHelper.AddDagClusterNode(AmServerName mailboxServerName, String& verboseLog)
   at Microsoft.Exchange.Cluster.ReplayService.ReplayRpcServer.<>c__DisplayClass34.<RpcsAddNodeToCluster>b__33()
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String databaseName, RpcServerOperation rpcOperation)
   --- End of stack trace on server (exchange3.acsi.com) ---
   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String serverName, RpcErrorExceptionInfo errorInfo)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunRpcOperationDbName(String serverName, String databaseName, Int32 timeoutMs, ReplayRpcClient& rpcClient, IHaRpcExceptionWrapper rpcExceptionWrapperInstance, InternalRpcOperation rpcOperation)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunRpcOperation(String serverName, Nullable`1 dbGuid, Int32 timeoutMs, ReplayRpcClient& rpcClient, IHaRpcExceptionWrapper rpcExceptionWrapperInstance, InternalRpcOperation rpcOperation)
   at Microsoft.Exchange.Cluster.Replay.ReplayRpcClientWrapper.RunAddNodeToCluster(AmServerName serverName, AmServerName newNode, String& verboseLog)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.AddDatabaseAvailabilityGroupServer.JoinNodeToCluster()
[2009-12-25T01:53:12] Updated Progress 'Done!' 100%.
[2009-12-25T01:53:12] COMPLETED
add-databaseavailabiltygroupserver explicitly called CloseTempLogFile().

Can't add Server 2012 to existing domain

I'm getting this error:
"Verification of replica failed. The forest functional level is Windows 2000. To install Windows Server 2012 domain or domain controller, the forest functional level must be Windows Server 2003."
My forest level is set at 2008R2, per AD Domains and Trusts (on both the 08 servers and 2012). The forest was set at 2003 before, so I demoted the old 2003 server and raised it to 2008 with no luck, then went ahead and went to 2008R2.
The 2012 server (clean install, no upgrades) is already a member of the domain.
adprep /forestprep reports "forest wide information has already been updated"
Connectivity seems to be fine (ping, no firewalls) between the 2 08R2 DCs and the new 2012 server. Weird thing is all the AD tools are installed in 2012, and I can even create new domain users from it.

Hello,
You dont need manual schema upgarde for adding a new windows 2012 Domain controller. That is integrated with dcpromotion. Also you dont required the DCPROMO.
Set DFL & FFL minimum 2003.
See the below link for adding a 2012 DC for an existing domain.
Install a Replica Windows Server 2012 Domain Controller in an Existing Domain (Level 200)
As with previous versions of Windows Server, automated domain preparation for domain controllers that run Windows server 2012 does not run GPPREP. Run
adprep.exe /gpprep manually for all domains that were not previously prepared for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. You should run GPPrep only once in the history of a domain, not with every upgrade. Adprep.exe
does not run /gpprep automatically because its operation can cause all files and folders in the SYSVOL folder to re-replicate on all domain controllers.
Still if you are facing issue. please upload the below outputs in skydrive & share us the link.
repadmin /replsummary * >> repl.txt
repadmin /showreps /v >> showreps.txt
DCDIAG /V /C /D /E /s:dcname >> dcdiag-DCS.txt
dcdiag /e /v /test:dns >> dns.txt
ipconfig /all >> dcip.txt
Regards
Biswajit Biswas
My
Blogs|TechnetWiki
Ninja
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

Can't add server to non-cluster pool

Hi all,
I created one non-clustered server pool, when tried to add the first server to the pool, it prompted one Error message as below:
"Initial server must include master role"
What does 'master role' of a server mean? I check the server properties, but not find similar property to configure its master role.
OVM manager:3.2.1
OVM server: 3.1.1
Thanks!

Hi all,
I created one non-clustered server pool, when tried to add the first server to the pool, it prompted one Error message as below:
"Initial server must include master role"
What does 'master role' of a server mean? I check the server properties, but not find similar property to configure its master role.
OVM manager:3.2.1
OVM server: 3.1.1
Thanks!

Error - add Server to the Server pool - VM Manager/Server 3.1.1

Hello,
1) I installed VM Manager 3.1.1 (IP: 192.168.1.51)
2) installed VM Server 3.1.1 (ovs-5e-94-c1) (IP: 192.168.1.22)
3) Created a Server pool (Virtual IP : 192.168.1.80) and option Clustered Server Pool unchecked
4) discovered VM Server moved in the Unassigned Servers folder
5) created Network 192.168.1.0 with all options checked (Server management, Live migrate, Cluster Heartbeat, Virtual machine, Storage)
5) but I can't add Server to the Server pool, I get the following error message?
I understand it may be a problem of unknown hostname, but I don't know what to add to the etc/hosts file on the manager or the server?
Job Construction Phase
begin()
Appended operation 'Server Role Update' to object '85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)'.
Appended operation 'Server Join Server Pool' to object '85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)'.
Appended operation 'Server Pool Construct' to object '0004fb0000020000a297adfbe2f44611 (PRQ1)'.
Appended operation 'Server Pool Virtual IP Configure' to object '0004fb0000020000a297adfbe2f44611 (PRQ1)'.
Appended operation 'Server Pool Member Update' to object '0004fb0000020000a297adfbe2f44611 (PRQ1)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [Cluster] a297adfbe2f44611
Object (IN_USE): [Server] 85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)
Operation: Server Role Update
Operation: Server Join Server Pool
Object (IN_USE): [ServerPool] 0004fb0000020000a297adfbe2f44611 (PRQ1)
Operation: Server Pool Construct
Operation: Server Pool Virtual IP Configure
Operation: Server Pool Member Update
Job Running Phase at 12:13 on Tue, Jun 26, 2012
Job Participants: []
Actioner
Starting operation 'Server Role Update' on object '85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)'
Completed operation 'Server Role Update' completed with direction ==> DONE
Starting operation 'Server Join Server Pool' on object '85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)'
Completed operation 'Server Join Server Pool' completed with direction ==> LATER
Starting operation 'Server Pool Construct' on object '0004fb0000020000a297adfbe2f44611 (PRQ1)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: create_server_pool to server: ovs-5e-94-c1 failed. OVMAPI_4004E Server Failed Command: create_server_pool PRQ1 0004fb0000020000a297adfbe2f44611 192.168.1.80 -1 ovs-5e-94-c1 192.168.1.22 master,xen,utility, Status: org.apache.xmlrpc.XmlRpcException: socket.gaierror:(-2, 'Name or service not known')
Tue Jun 26 12:13:39 CEST 2012
Tue Jun 26 12:13:39 CEST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendUndispatchedServerCommand(ActionEngine.java:459)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:385)
at com.oracle.ovm.mgr.action.ServerPoolAction.createServerPool(ServerPoolAction.java:55)
at com.oracle.ovm.mgr.op.virtual.ServerPoolConstruct.createServerPool(ServerPoolConstruct.java:137)
at com.oracle.ovm.mgr.op.virtual.ServerPoolConstruct.action(ServerPoolConstruct.java:55)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.ServerPoolProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: create_server_pool PRQ1 0004fb0000020000a297adfbe2f44611 192.168.1.80 -1 ovs-5e-94-c1 192.168.1.22 master,xen,utility, Status: org.apache.xmlrpc.XmlRpcException: socket.gaierror:(-2, 'Name or service not known')
Tue Jun 26 12:13:39 CEST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 30 more
FailedOperationCleanup
Starting failed operation 'Server Pool Construct' cleanup on object 'PRQ1'
Complete rollback operation 'Server Pool Construct' completed with direction=PRQ1
Rollbacker
Executing rollback operation 'Server Role Update' on object '85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)'
Complete rollback operation 'Server Role Update' completed with direction=DONE
Executing rollback operation 'Server Pool Construct' on object '0004fb0000020000a297adfbe2f44611 (PRQ1)'
Complete rollback operation 'Server Pool Construct' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [Cluster] a297adfbe2f44611
Object (IN_USE): [Server] 85:52:39:bc:ec:5f:4c:25:8b:ad:ea:e4:cf:60:a8:70 (ovs-5e-94-c1)
Object (IN_USE): [ServerPool] 0004fb0000020000a297adfbe2f44611 (PRQ1)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=8065 method=addTransactionIdentifier accessLevel=6
Class=ServerPoolDbImpl vessel_id=6493 method=addServer accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=lock accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=addServerRole accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=addServerRole accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=addServerRole accessLevel=6
Class=ServerPoolDbImpl vessel_id=6493 method=addServerInternal accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=setServerPool accessLevel=6
Class=ClusterDbImpl vessel_id=6499 method=allocateSlotForServer accessLevel=6
Class=InternalJobDbImpl vessel_id=8065 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=8065 method=setAssociatedHandles accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=setCurrentJobOperationComplete accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=8065 method=setTuringMachineFlag accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=setCurrentOperationToLater accessLevel=6
Class=InternalJobDbImpl vessel_id=8065 method=setTuringMachineFlag accessLevel=6
Class=ServerPoolDbImpl vessel_id=6493 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=8065 method=setFailedOperation accessLevel=6
Class=ClusterDbImpl vessel_id=6499 method=nextJobOperation accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=nextJobOperation accessLevel=6
Class=ServerPoolDbImpl vessel_id=6493 method=nextJobOperation accessLevel=6
Class=ServerDbImpl vessel_id=7034 method=nextJobOperation accessLevel=6
Class=ServerPoolDbImpl vessel_id=6493 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: create_server_pool to server: ovs-5e-94-c1 failed. OVMAPI_4004E Server Failed Command: create_server_pool PRQ1 0004fb0000020000a297adfbe2f44611 192.168.1.80 -1 ovs-5e-94-c1 192.168.1.22 master,xen,utility, Status: org.apache.xmlrpc.XmlRpcException: socket.gaierror:(-2, 'Name or service not known')
Tue Jun 26 12:13:39 CEST 2012
Tue Jun 26 12:13:39 CEST 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: create_server_pool to server: ovs-5e-94-c1 failed. OVMAPI_4004E Server Failed Command: create_server_pool PRQ1 0004fb0000020000a297adfbe2f44611 192.168.1.80 -1 ovs-5e-94-c1 192.168.1.22 master,xen,utility, Status: org.apache.xmlrpc.XmlRpcException: socket.gaierror:(-2, 'Name or service not known')
Tue Jun 26 12:13:39 CEST 2012
Tue Jun 26 12:13:39 CEST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendUndispatchedServerCommand(ActionEngine.java:459)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:385)
at com.oracle.ovm.mgr.action.ServerPoolAction.createServerPool(ServerPoolAction.java:55)
at com.oracle.ovm.mgr.op.virtual.ServerPoolConstruct.createServerPool(ServerPoolConstruct.java:137)
at com.oracle.ovm.mgr.op.virtual.ServerPoolConstruct.action(ServerPoolConstruct.java:55)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at sun.reflect.GeneratedMethodAccessor909.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.ServerPoolProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at sun.reflect.GeneratedMethodAccessor1118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: create_server_pool PRQ1 0004fb0000020000a297adfbe2f44611 192.168.1.80 -1 ovs-5e-94-c1 192.168.1.22 master,xen,utility, Status: org.apache.xmlrpc.XmlRpcException: socket.gaierror:(-2, 'Name or service not known')
Tue Jun 26 12:13:39 CEST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 30 more
End of Job
Edited by: user13609132 on 2 juil. 2012 10:38

Thanks DBagy, it's working fine!
1) I installed VM Manager 3.1.1 (IP: 192.168.1.51)
2) installed VM Server 3.1.1 (name: ovs-5e-94-c1) (IP: 192.168.1.22)
3) Created a Server pool (name: PRQ1 and Virtual IP : 192.168.1.80) and option Clustered Server Pool unchecked
4) discovered VM Server moved in the Unassigned Servers folder
5) created Network 192.168.1.0 with all options checked (Server management, Live migrate, Cluster Heartbeat, Virtual machine, Storage)
Solution: 6) Add to /etc/hosts of the OVM Server the line : 192.168.1.22 ovs-5e-94-c1
7) In VM Manager: add VM server ovs-5e-94-c1 to Server pool PRQ1 --> Completed.

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Can not add new server

Hi,
I install Oracle Workshop for WebLogic 10.3 on Windows Vista and I create new remote server without problem but I can not see server state.
So I delete server and try add new one. Unfortunately when new server popup window is open and I click next (to Specify a WebLogic domain directory/Specify a remote host name) I can not type connection data because all fields but Re-enter password are disabled for remote server type.
Next I try reinstall Oracle Workshop and this takes no effect.
Thanks for answer.
Peter

In new installation BEA2 I create new domain and start it. After configuring WebLogic Runtime Oracle WebLogic Server connection start to live.
Same procedure with old installation doesn't work.

Can't add drivers to Server 2012 R2 boot image in WDS

Hi all.
I want to use my "old" Windows Server 2012 (not R2), WDS to deploy new R2 servers but i can't add driver package to the R2 boot image, it comes out with error code: 0xc0000135 no matter what drivers i use.
Without network drivers i can't boot the image on my physical servers, i've tried on a virtual machine where it works just fine.
I can't use the old boot image to install R2, then it comes with error: "Windows could not apply unattend settings during pass [offlineServicing]." when it tries to install it on both virtual and physical servers.
My initial thought is that the WDS server has to be on a R2 server but i can't find anything that proofs that.
Can someone confirm that non R2 WDS is not supported to R2 or does anyone have an idea to a solution?
Thank you in advance.

Okay maybe not a solution but i installed a new WDS server on R2 and then there was no problem adding driver package to to boot image.
So i was able to confirm my theory that it's not supported to deploy R2 from a non-R2 WDS server. If anyone can make it work please let me know but until then i think this is the only way.
If I understand your description of the issue, the problem is that you are trying to update a WinPE 5.0 WIM with a version of the ADK that services WinPE 4.0 images. Installing the new Windows Server 2012 R2 server caused SCCM to use the version of the
ADK that services WinPE 5.0 images. You should be able to deploy them fine from the other server, but you can only service them from the new one. You will not be able to service the older WinPE 4.0 images from the new server either.

Can't add any apps ,eprint server return"SBSError". What does this mean?

Please bear with my poor English。。。
when i add apps to K510a
Always show:
I used ie & chrome.
chrome debug tools show the last post for "add apps to printer " return a ErrorCode "552"
I open the page source,find this code:
when I add apps，always return error code "552 SBSError",and show "Something just went wrong on our server!"
so i can't add any apps to my k510a.
please tell me,What is the meaning of “SBSError”？ Thank you。。。。。。

ICloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits

I originally posted this in the MobileMe forum. I am totally frustrated and disgusted with the unreliable and buggy iCloud. I am hoping smarter people than me can help resolve this. Thank you.
My primary data source is/was my MacBook Pro. It was all synced to MobileMe. (Contacts and iCal). iCloud came along. I "upgraded" to iCloud {the frustrating process of "your account needs to be upgraded, create an appleID..." was a whole different pain}.
To make life simple, I even allowed iCloud to be the source of data for my iMac as well as iPhone 4 and iPhone 4S by deleting everything and letting everything be populated from iCloud. Now, supposedly, all my contacts and calendar/reminder data is in iCloud and all the data on the iMac and iPhones if from iCloud.
Except, I cannot make edits to contacts in iCloud or even Add a new contact. When I Add or Save an edit in iCloud, EACH time I get an ERROR and the error report going to Apple is given below.
Worse, I spent an hour cleaning up the freshly downloaded contacts in the iMac's AddressBook. NONE of those changes went up to iCloud.
EVEN worse, iCloud overwrote the changed fields back to the old/blank fields, wasting my hour of work.
Adding cards in AddressBook on the computer also does not propagate to iCloud, though edits to or changes to iCal DO show up in iCloud. But, adds/deletes/edits to Contacts on iMac OR iPhones do NOT show up in iCloud.
Your help appreciated. Regards,
Imran
===
This is from the iMac console when I tried to delete a contact:
11/20/11 6:05:09.289 AM Address Book: Process com.apple.AddressBook deleting 1 contact
11/20/11 6:05:10.045 AM Address Book: [CardDAVPlugin-ERROR] -getHomeInfo:[_controller containersAtURLs:{(
https://MYNAME%[email protected]:443/########/carddavhome///MYNAME%[email protected]:443/########/carddavhome/
)}] Error Domain=CoreDAVErrorDomain Code=1 "The operation couldn’t be completed. (CoreDAVErrorDomain error 1.)"
The rest of the log is at: https://discussions.apple.com/thread/3508969 and not repeated here.

I added this comment to a thread about trying to get rid of iCloud once it has been used... it is much harder than you'd imagine... I am sharing it here because it includes steps I took after the problem we are discussing above....
====
I love Apple since it started and been a Mac user since it came out. Much that MobileMe was frustrating and had a lousy launch, I thought it was impossible to make something worse than MobileMe. Apple succeeded with this disaster, data destroying, heart burning, stomach churning and hours wasting beast called iCloud.
See iCloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits By IMRAN Happy to have your thoughts on how to solve that nightmare. My last attempt (manually restorying my 5000 contacts in AddressBook, then painfully manually deleting contacts in iCloud {Select All > Delete there gives Server Errors also}. Finally managed. Then resyncing the MacBook Pro to iCloud led to 1000 contacts NOT syncing and no way except manually listing each address list side by side to figure out which ones it missed pulling in. Horror. Disaster. Shame.
For the user who says that turning off iCloud on the Mac and accepting its offer to delete data will delete data only on the cloud, sorry, but, unless I misunderstood you, that is dangerously wrong.
Like an evil spawn of SkyNet and a PC Boot Sector Virus, once iCloud has grabbed your data IT becomes the master of your data, your digital life. Deleting stuff means the stuff on your DEVICE (e.g. MacBook Pro, where you created and have all the ORIGINAL data in that iCloud sucked in) is what will be destroyed. Be careful.
If you're playing with this beast, not only make backups of your data in AddressBook and iCal, but invest in an external drive and clone your whole hard drive.
I am literally having to make a decision tonight, keep my MacBook Pro as the master, and sync via iTunes to the iPhone 4S and 4. I have an iMac mostly for music and video, which it was "cool" to have synced iCal and AB on, though not regularly used. But, after the hours wasted with iCloud, and the repeated data loss, I can live without the iMac being a synced device.
Hope this helps.
Regards
Imran Anwar

Can't add new server in site set up

In DW6 I can't add a new server in the Servers section of the Site Setup dialog box because there is no plus sign. Only an explanatory sentence shows-- rest is just missing. Have to use DW4 to set up a site then open it with DW6.

That's very odd dkd;alkje;oihp[oihjl,
Have you done any of the usual steps to clear the issue?
Things like clearing the cache or config folder, reinstall, etc?
One of the decent "catch-alls" for DW is clearing the cache or config folder. The steps are outlined here:http://forums.adobe.com/thread/494811
Quick Note: Many people here won't respond to gibberish names, they tend not to even look at the posts thinking they belong to some kind of forum spam bot. You would benefit more by using an actual name, even a silly name, but a name none the less.

Can't add Computer or New Computer list on 10.3.9 Server Workgroup manager

I have a 10.3.9 server with Open Directory running. I can manage user and group preferences (Workgroup manager v2.0.1) but can't add a computer or new computer list because the option is disabled. If I connect to it's open directory from another server running 10.3.9 and same version of Workgroup Mgr, the new computer list and adding computers is enabled. This other server is in another subnet and not typically available for use by the network admin of the problem server. Any ideas to get the computer management enabled?

Hi,
an additional discovery I made:
Take the account "A", which is functioning on these two "problem-clients". I change the password from "123456" to "abcdef".
I try to log in this account with one of these two Macs... -> does NOT work
I try to log in this account with another Client (w/o problems) -> does work
I change the password back to "123456"
I try to log in this account with one of these two Macs -> does work
I deleted the accounts and created new ones. The accounts work fine on every Mac despite these two machines.
It looks like these two clients are not updating the directoryservice information.
So I tried to get a look, which information is readable at the client machines (which are making the trouble):
lookupd version 369.5 (root 2006.12.02 12:00:25 UTC)
Enter command name, "help", or "quit" to exit
userWithName: test
Dictionary: "DS: user test"
lookupagent: DSAgent
lookupvalidation: 1195423412
gid: 1025
home: /Network/Servers/xserve/Volumes/DATA/HomeDir/test
name: test testuser Test User
passwd: ****** ******
realname: Test User
shell: /bin/bash
uid: 1026
+ Category: user
+ Time to live: 43200
+ Age: 0 (expires in 43200 seconds)
+ Negative: No
+ Cache hits: 0
+ Retain count: 7
I gathered this information on the client, which can NOT log into this account. I can try all new or changed accounts, all are visible to the client....
Does anybody here unterstand this?
• the used accounts are all ok
• other accounts work fine on this two machines
• the problem only occurs on changed or new accounts.
• reverting the changed accounts to the old state: the accounts work again
Regards
svenc

How to Delete SMTP Server on iPhone/Can't Add Additional Servers

How do you delete the primary SMTP server. I'm on 2.2.1 My outgoing mail is not working and I figured since I'm a Mobile Me user I'll change the SMTP setting on the iPhone.
I can't add a new smtp server. I go into account info for my Mobile Me and select SMTP. I can't see how to delete the primary server and when I try to add server I enter smtp.mac.com then my user name and password. I see 3 check marks after I press Save. I says it verified. But it never shows up on the list. I have secondary server but I can't figure out how to delete that one. Its the ATT smtp server cwmx. All that info is ghosted yet it's not on my desktop account.
If synced Mobile Me but nothing changes.
Confused and I can't find any help on Apples website.

I have the same problem.
Not sure, but I think the iPhone won't let you modify certain email settings of accounts created by syncing to your laptop or PC.
Delete the account on your iPhone and create it again manually (on the phone itself.)
This worked for me.

Can not add Roles Server 2012 Standard R2

Every time I try and add the DFS Namespace and replication roles it says the server requires a re-boot. I check to ensure the version of server is activated and it is.
I rebooted twice, checked for critical updates which there was none and tried again, same issues, re-boot required, rebooted again.
Next up I ran DISM /Online /Cleanup-Image /RestoreHealth
This completed and said it fixed some metadata corruption. Re-boot, Try role Install, same issue, reboot required.
Next I check Trusted Installer to see if there was a pending install, nothing, Registry is correct.
Next I checked the other two entries mentioned in other articles (pending server manager reboot, pending file rename operation) both had correct values.
I ran DISM /Online /Cleanup-Image /RestoreHealth
found meta data corruption and fixed, reboot.
Try role install, same issue, pending reboot. I have tried to install the rolls from a elevated powershell and through the server manager.
Last item I tried was to fix and .net corruption, and the tool would not work on Server 2012 R2.
I am now at a loss as to what to look to get these roles to install.
What are next steps, what can I do to get these roles installed? I need to get replication working on this server but it is hard when you can not even add server roles.
Any help would be appreciated.
Curt Winter
Business Technology Services

Dave,
I finally got the DFS roles installed, can not remember what I did to get them in besides get lucky. I am now trying to install domain roles on this same Server, and I keep getting server needs a restart. Check the registry no entries preventing
the install, installed critical updated, rebooted countless times. When the server boots it reports the following:
It shows red under server mgr and manageability, with the message, "Online - Cannot get role and feature data"
I ran the DISM.exe /Online /Cleanup-image /ScanHealth
Here is the link to the CBS log file:
https://mpillc-my.sharepoint.com/personal/bts_admin_managed-programs_com/_layouts/15/guestaccess.aspx?guestaccesstoken=0XXCwKYbjOL2Y9fXiJcpfoDvJBqVPrCBZ7uvdj%2f5usI%3d&docid=00b8e6c2c0800465eb84afb54c2650715
Here is a link to the Windows Update File:
https://mpillc-my.sharepoint.com/personal/bts_admin_managed-programs_com/_layouts/15/guestaccess.aspx?guestaccesstoken=LQ9ldakkbCqwjKDZLIXgEfuvX4Pri1UBCTEAt0NK%2bZw%3d&docid=0ed33ff368f584111b95e180565b02f4b
Any input would be appreciated, thanks for your response before, sorry I did not respond.
Curt Winter
Microsoft Certified Professional
Business Technology Services

Can't add server on netBean

Similar Messages

Maybe you are looking for