Can't add Transitions b/w LiveType clips in FCE

I'm making small promo movie in FCE, with a lot of LiveType clips interspersed with some movie clips (Apple Interm. Codec--but I've also tried using DV-NTSC). My problem: when I've strung together several LT clips (.ipr--but also .mov after rendering) I can't add transitions b/w them in FCE (and can't add trans. b/w a LT and movie clip). I get msg: "insufficient content for edit."
I don't understand well the whole codec process. I've read here that the properties need to be the same b/w LT and FCE, but I'm not sure exactly how to do that. The property options in both programs have slightly different presets and I've tried to match the codec & aspect ratios etc. as best I can. Since I don't know what I'm doing in this area, I've tried to match things up as best as possible, yet no luck.
BUT, even when I've opened a brand new project in FCE, brought in several .ipr clips (w/out bringing in any movie clips), I still can't add transitions b/w .ipr clips (or LT .mov files).
Help! What am I doing wrong?
Thanks

OKay, but how do i do it..
I have 2 movies...I want a transition of 2 seconds..do i Mark in from the point of the first movie where i want to have the transition to start ? And out in the 2nd movie where i want it to finished (maximum) ?
Or do i mark out on the first movie and mark in on the 2nd movie ?
The whole day i am trying things but nothing works for me.
I even did see a video tut that says it's because the videos are not NTSC...But they are HD so that wouldn make a problem ? Or does it ?
Sorry for these simple questions but there is no tut in my language and i can't find a forum that explains it in dutch..
Thanks in advance

Similar Messages

I can't add transitions between clips, but between generated media?!

I can't add transitions between clips, but between generated media?! Any ideas?

I am assumming you are working with "connected clips" which are either above or below the main storyline "track" (the one you put your first project clip onto when you started the project). You can only add transitions to clips that are on either the primary storyline or on a created storyline. Select the clips you are working with then choose the Clip menu and the Create Storyline selection. Make sure snap is set to assure your clips are really butted up against each other. Then apply the transitions.

Can't Add Transitions/All Clips Stacked in one Box in Sceneline

Help-
I'm a total newbie with Premier Elements 7, but I'm about ready to throw a brick through my monitor.
I'm in Sceneline, and when I drag clips, they all get stacked on top of one another in the left box. I can't add transitions (I can find them, but when i drag them onto the transition arrows nothing happens).
What is the trick to dragging clips into new entries on the Sceneline?
Thanks in advance!
Dean

The audio format (stereo or 5.1 surround sound) of your video does not match the audio format of the project preset you selected. In Timeline mode the first three tracks are reserved for the audio format determined by the project preset. If you use another audio format it will be placed on track 4. When this happens you can not see the clips in Sceneline mode... they are stacked as you are seeing.
Solution is to either use Timeline mode or if you wish to use Sceneline mode you have to use the correct project preset. HOWEVER... PE7 only supports 5.1 audio in AVCHD high definition projects... so if you have standard definition with 5.1 audio you have no choice other than to use Timeline mode. If you want to do any serious editing you will really need to use this mode anyway.

Can you add transitions to entire timeline at once, rather than single actions only?

can you add transitions to entire timeline at once, or only a single transition between two individual clips, which then must be repeated throughout the entire timeline? It would save time to do entire timeline with one transition action.

As I show you in my book, you select several clips on your timeline at once and right-click, you will find the option to Add Default Transition to all.
You can set your Default Transition by right-clicking a transition in the Transitions panel.

Can't add transitions, titles

Hi,
I have iMovie 4 and I am trying to add transitions and titles to color clips that I have placed in my imovie. I know you are supposed to be able to "drag" titles on to the clip that you want, but there is nothing for me to drag. I am at a loss. I can't add transitions either. Please help! My first experience using iMovie has been completely awful. I thought this was supposed to be user-friendly...

You are supposed to drag the name of the title/transition from the list.
http://www.danslagle.com/mac/iMovie/usage/5017.shtml

Why can't I add transitions to green screened clips?

I have still images with green-screened video on top. Is there a way i could merge the two or add transitions to the video part? it looks choppy with the green-screened part cutting out right before the transition of the still. thanks!

Hello, AmezLady.
Thank you for visiting Apple Support Communities.
I understand that you are unable manually add transitions. This sounds like you may have automatic transitions enabled. Try disabling this to see if you can manually add them.
iMovie '11: Add transitions between video clips
http://support.apple.com/kb/PH2218
Cheers,
Jason H.

Can't add transitions to either LT files or .mov

Hi,
I'm trying to and some transitions for a title sequence, I've created the titles in LiveType, when I either use the LiveTYpe files or rendered out files.
I can a transition into the first title but no more.
Any ideas?
iMac 20" Core Duo Mac OS X (10.4.6)

Do you have enough Media Handles to create
transitions?
Open a clip into the Viewer and see where the in/out
points are, if they are at the very start or end of
the clip there is no Media Handles available for FCE
to use for transitions.
Al
~bangs head on desk~ thanks, that's fixed it, some days I can be really thick...
I guess it's just going to be one of those days today.
I could have sworn that I'd dropped titles/video clips in and used transitions before without havign set in and out...
It's working that's what matters.
Thanks again

How can I add transition or effect sound?

Hi,
I know how to make a sound effect on a slide, but it is for the whole slide.
How can I add a transition or effect sould only during the transition period when I click my mouse?
Powerpoint can do it easily, can you send the answer to my email please?
Like (0

just think about the voice setting when you go to the record you should find mono and stereo. I have only mic volume -cd volume and line volume i should have mono mixer and stereo mixer also.
So can i add them to the list ?? For example when you use paltalk program you can play music from your computer in the room so all in this room can hear it eaven if you adjust your volume to mute,this is using mixer mono or stereo.
I hope i explane it for you. Thanx

Can't add transition to Quicktime import

I made a Quicktime movie in IMovie using a series of photos and then imported it to FCE. It's now sitting in the Timeline but I cannot add transitions to either end of it. Any thoughts?

If you come from iMovie, you're used to iMovie making transitions by shortening the adjacent shots, taking a bit off each of them to create an overlap for the transition to occur. This incidentally shortens your sequence and possibly pulls things out of alignment with your audio, but that's a problem for iMovie users to deal with.
In FCE and FCP and all other professional editing applications, the overlap is not taken from inside the shot; it's taken from extra material, called handles in FCE, that lie beyond the end of the shot. So if you put a shot in a sequence that uses all the available media for that shot, that is you marked the out point on the very last frame, there are then no handles for the application to extend the shot and create the necessary overlap to make the transition, and the transition will fail.
For the default one second transition you need at least 15 more frames after the marked out point of the outgoing, and 15 more frames in front of, before the marked in point on the incoming shot. That will give you enough material for the default centered on edit, one second cross dissolve or whatever transition you're adding.
All the best,
Tom

Can i add transitions to imovie11 aside from the ones that are already there?

Is there a way to add transitions to iMovie '11 version (9.0.8)? I have noticed the ones that are already provided, but I'm wondering if there is a way to get more.

you need to have the same computer the same folder where you put your pictures like a folder on your Desktop on a mac or a pc.
But if you wan't to have your pictures on your iPod cache folder select the checkbox below, it's Include Full resolution photos, by clicking that, the photos you'll put on your iPod will have a copy on a folder of your iPod i.e.
When using win xp:
Find your iPod on my computer: "Steve's iPod"-> open it-> go to Photos-> Full Resolution-> then continue opening folders (it's safe) until you see your Photo copies.
It's a great way of moving it from another computer, like just using copy, cut, paste

FCP Auto-Add Transitions to all audio clips

This is the second time this has happened. I've upgraded to Final Cut Pro 7. Something is triggering an auto-add transition to every audio sequence on my timeline. The only way to avoid it is to click undo until it goes away. With a huge deadline tomorrow I have already pressed undoe a 100 times but it will still not go away. Auto-save goes back 3 hours ago with this preset still on. This means I am doomed to erase each transition individually on a show with many tracks. It's not apparent in my preferences.
I haven't figured out how to disable this new feature and need help to avoid this mess in the future.
Thanks for listening.

Try deleting the preferences file in the evven it has become corrupted and is causing this to occur...

Losing audio, quit doesn't work, can't add transition???

I've been using FCE HD on a dual G5 with no problems for a few months on my office machine. I just got a 2.66 Quad Zeon at home and I am having major issues. I seem to lose my audio on my captured media at random times. Once I reset it comes back, any ideas? Also, after that happens, I can't quit from the file menu, only force quit, or quit from the dock. Also, when I try to add a transition, I get an error that there isn't enough information to add, but the clips are several minutes long. Any help is very much appreciated.
Tom

The transition problem seems like the old business of not having handles on the clips.
It doesn't matter how long the clip is - it must have at least half a second cut off any end that touches a transition:-
http://www.fcpbook.com/Effects1.html
With the audio are you referring to a loss of sync? This could be caused by your Easy Setup configuration differing from that of your camera.
Ian.

Can you add transitions in iMovie11 between two freeze frames?

I am trying to add a transition between two freeze frames but when I do, my entire movie goes black and appears to freeze. My freeze frames are over 30 seconds long so timing shouldn't be an issue. Any suggestions?

As I show you in my book, you select several clips on your timeline at once and right-click, you will find the option to Add Default Transition to all.
You can set your Default Transition by right-clicking a transition in the Transitions panel.

Can't add transitions

I have had no problem using imovie over the last few months but suddenly the add / update facility for transitions is not working. All the other editing functions seem fine but I can't drag and drop transitions anymore, or click Add and can't work out what I need to do to put them in.
Please help!

Hey Sue, he heard you the first time!
Don't be so impatient - stop clicking the Post Message Button, we all know the forums are in slow-mo at this time!

Can't add transitions in FCE 4?

Just upgraded to FCE 4 from 3HD. I can't seem to be able to insert any transitions between video clips anymore. What am I missing?

Idk, its extremely simple. In the left window pane go to effects and select video transitions to trigger the drop down. Choose the desired transition and drag to the timeline.

Can't add Transitions b/w LiveType clips in FCE

Similar Messages

Maybe you are looking for