Can't add transitions to either LT files or .mov

Hi,
I'm trying to and some transitions for a title sequence, I've created the titles in LiveType, when I either use the LiveTYpe files or rendered out files.
I can a transition into the first title but no more.
Any ideas?
iMac 20" Core Duo Mac OS X (10.4.6)

Do you have enough Media Handles to create
transitions?
Open a clip into the Viewer and see where the in/out
points are, if they are at the very start or end of
the clip there is no Media Handles available for FCE
to use for transitions.
Al
~bangs head on desk~ thanks, that's fixed it, some days I can be really thick...
I guess it's just going to be one of those days today.
I could have sworn that I'd dropped titles/video clips in and used transitions before without havign set in and out...
It's working that's what matters.
Thanks again

Similar Messages

Can't add transitions, titles

Hi,
I have iMovie 4 and I am trying to add transitions and titles to color clips that I have placed in my imovie. I know you are supposed to be able to "drag" titles on to the clip that you want, but there is nothing for me to drag. I am at a loss. I can't add transitions either. Please help! My first experience using iMovie has been completely awful. I thought this was supposed to be user-friendly...

You are supposed to drag the name of the title/transition from the list.
http://www.danslagle.com/mac/iMovie/usage/5017.shtml

I can't add transitions between clips, but between generated media?!

I can't add transitions between clips, but between generated media?! Any ideas?

I am assumming you are working with "connected clips" which are either above or below the main storyline "track" (the one you put your first project clip onto when you started the project). You can only add transitions to clips that are on either the primary storyline or on a created storyline. Select the clips you are working with then choose the Clip menu and the Create Storyline selection. Make sure snap is set to assure your clips are really butted up against each other. Then apply the transitions.

Can't add Transitions b/w LiveType clips in FCE

I'm making small promo movie in FCE, with a lot of LiveType clips interspersed with some movie clips (Apple Interm. Codec--but I've also tried using DV-NTSC). My problem: when I've strung together several LT clips (.ipr--but also .mov after rendering) I can't add transitions b/w them in FCE (and can't add trans. b/w a LT and movie clip). I get msg: "insufficient content for edit."
I don't understand well the whole codec process. I've read here that the properties need to be the same b/w LT and FCE, but I'm not sure exactly how to do that. The property options in both programs have slightly different presets and I've tried to match the codec & aspect ratios etc. as best I can. Since I don't know what I'm doing in this area, I've tried to match things up as best as possible, yet no luck.
BUT, even when I've opened a brand new project in FCE, brought in several .ipr clips (w/out bringing in any movie clips), I still can't add transitions b/w .ipr clips (or LT .mov files).
Help! What am I doing wrong?
Thanks

OKay, but how do i do it..
I have 2 movies...I want a transition of 2 seconds..do i Mark in from the point of the first movie where i want to have the transition to start ? And out in the 2nd movie where i want it to finished (maximum) ?
Or do i mark out on the first movie and mark in on the 2nd movie ?
The whole day i am trying things but nothing works for me.
I even did see a video tut that says it's because the videos are not NTSC...But they are HD so that wouldn make a problem ? Or does it ?
Sorry for these simple questions but there is no tut in my language and i can't find a forum that explains it in dutch..
Thanks in advance

Can't Add Transitions/All Clips Stacked in one Box in Sceneline

Help-
I'm a total newbie with Premier Elements 7, but I'm about ready to throw a brick through my monitor.
I'm in Sceneline, and when I drag clips, they all get stacked on top of one another in the left box. I can't add transitions (I can find them, but when i drag them onto the transition arrows nothing happens).
What is the trick to dragging clips into new entries on the Sceneline?
Thanks in advance!
Dean

The audio format (stereo or 5.1 surround sound) of your video does not match the audio format of the project preset you selected. In Timeline mode the first three tracks are reserved for the audio format determined by the project preset. If you use another audio format it will be placed on track 4. When this happens you can not see the clips in Sceneline mode... they are stacked as you are seeing.
Solution is to either use Timeline mode or if you wish to use Sceneline mode you have to use the correct project preset. HOWEVER... PE7 only supports 5.1 audio in AVCHD high definition projects... so if you have standard definition with 5.1 audio you have no choice other than to use Timeline mode. If you want to do any serious editing you will really need to use this mode anyway.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....

Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe

Can't add transition to Quicktime import

I made a Quicktime movie in IMovie using a series of photos and then imported it to FCE. It's now sitting in the Timeline but I cannot add transitions to either end of it. Any thoughts?

If you come from iMovie, you're used to iMovie making transitions by shortening the adjacent shots, taking a bit off each of them to create an overlap for the transition to occur. This incidentally shortens your sequence and possibly pulls things out of alignment with your audio, but that's a problem for iMovie users to deal with.
In FCE and FCP and all other professional editing applications, the overlap is not taken from inside the shot; it's taken from extra material, called handles in FCE, that lie beyond the end of the shot. So if you put a shot in a sequence that uses all the available media for that shot, that is you marked the out point on the very last frame, there are then no handles for the application to extend the shot and create the necessary overlap to make the transition, and the transition will fail.
For the default one second transition you need at least 15 more frames after the marked out point of the outgoing, and 15 more frames in front of, before the marked in point on the incoming shot. That will give you enough material for the default centered on edit, one second cross dissolve or whatever transition you're adding.
All the best,
Tom

Can you add transitions to entire timeline at once, rather than single actions only?

can you add transitions to entire timeline at once, or only a single transition between two individual clips, which then must be repeated throughout the entire timeline? It would save time to do entire timeline with one transition action.

As I show you in my book, you select several clips on your timeline at once and right-click, you will find the option to Add Default Transition to all.
You can set your Default Transition by right-clicking a transition in the Transitions panel.

Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro

Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro CS6?

RED footage has a restriction on metadata. We are looking into what it would take to get full metadata support into our system, but you cannot tag red footage at this time.

How can I add a PSD logo watermark file to an image in CS4 or Lightroom3?

Hi,
I have a psd file with my company logo as a watermark. How can I add that file to an image in CS4 or Lightroom3. I am sure it is really simple and I am just a bit dopey but would appreciate the help.
Thanks.
Natalie

This is fully explained in the help file. Hit F1 and go to using the watermark editor, you will see there is is also a video tutorial so I won't repeat the advice here.
You will need to change the PSD to a PNG in order to use it and retain any transparency layers. Open the file in Photoshop and choose save for web, then select either the PNG 8 or PNG 24 preset and save a copy of the file.

How can I add the attachment list pdf file context to purchase order ?

Dear all,
I have use services for object in ME22N to attach PDF file to purchase order,I want to know how can I add the pdf file context to purchase order when I send the purchase order to vendor.
Thanks in advance
Best regards,
Merry

hi,
attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) .
Click your Service Object button -> Create -> Create attachment
then select your window directory ( which file you need to attach) select your file Now your system shows message Service "Create attachment" is started.
Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.

How can you add comments to a text file while using a Digital Waveform vi?

Hi. I'm very new to Labview. I have a txt file of 1's and 0's wired to a "read from text file" which is then wired to a "spreadsheet string to digital.vi" ("digital waveform") and lastly to a graph. I want to add notes to the txt file that will not be read in the digital waveform. i.e. Like how you use // or /* in a C++ program to show that you are writing a comment and not code.
Labview version: 8.5
Thank you

You will just need in your text file a line at a time. Search the string for the characters // or /*. If it finds them, then loop back and read another line. If it doesn't find them, you must have a good line of data and you can pass on to the next part of your cod.

How can I add transition or effect sound?

Hi,
I know how to make a sound effect on a slide, but it is for the whole slide.
How can I add a transition or effect sould only during the transition period when I click my mouse?
Powerpoint can do it easily, can you send the answer to my email please?
Like (0

just think about the voice setting when you go to the record you should find mono and stereo. I have only mic volume -cd volume and line volume i should have mono mixer and stereo mixer also.
So can i add them to the list ?? For example when you use paltalk program you can play music from your computer in the room so all in this room can hear it eaven if you adjust your volume to mute,this is using mixer mono or stereo.
I hope i explane it for you. Thanx

How can I add all of my PDF files at once

Is there any way to add all of my PDF files that are in different folder at once, kind of self search option that add the files automatically, thanks.

I'd also really like this feature added (unless I'm just missing something that is)

How can I add a "Create New Text File" contextual menu?

Hi,
I'd like to add a "Create New Text File" contextual item. I found the "new text file" action in Automator, but I don't really know where to go from there... I want it to work on the desktop and in finder...
Thanks

See:
Mac OS X Automation,
Automated Workflow Tips,
Introduction to Automator tutorial, and
a four-parter on Automation in Snow Leopard by Sal Saghoian:
Snow Leopard Services,
Services for iPhoto,
Safari and WebKit integration, and
Installing and using services.
Finally,
Developing AppleScript Applications and
Apple's Automator Developer Documentation

Can't add transitions to either LT files or .mov

Similar Messages

Maybe you are looking for