Can't adjust audio keyframes for certain sequences?!

I have a Sequence that I used Pluraleyes on (syncs multiple cameras automatically) but to do this, you're reuired to export a FCP .xml, import it in Pluraleyes, run the sync, which it exports a new FCP .xml, which you have to import back into Premiere... but now I've lost the ability to adjust ANY Audio keyframes! The Keyframe switch on the left of the timeline just stay greyed ouy for all my video clips!
I've created new sequences and dropped the same video into those, and it works fine...
Does anyone know why, and how to fix it?
Thanks all!
Aza

Nevermind, figured it out... Pluraleyes was somehow splitting the stereo audio into two mono tracks upon import into premiere, and I guess this confused Premiere...
Not sure if this is a Premiere .xml import bug, or a Pluraleyes bug...

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Can you move audio keyframes?

Hello,
I've got a question here. I've got a nice little cut on my TL. Video on V1, sync-sound on A1, and stereo-tracks with music on A2+3. In a certain area on the stereo tracks, I used audio keyframes to lower the volume so that you can understand the speaker on A1. Now the client wants a different section of the music to underneath the video. Which is easy enough, simply slip the audio tracks A2+3. However, now the audio keyframes have moved, too.
Now, of course I could simply create new audio keyframes where I need them and delete the old ones. But is there an easier way, can I select a group of audio keyframes and slide them? The way you can with filter keyframes when you toggle on the clip keyframes in the TL?
Hope I'm being clear here, if not let me know and I'll have another cuppa and get back to you!
Cheers,
Colin

you're right, the video filter keyframe method won't work for moving audio keyframes
only way I can think of is to copy and paste the "Levels" attribute ...
use the razor blade tool to put a cut at the first existing keyframe and then another cut at the point where you want to transfer them. then "copy" the clip with the existing keyframes and paste attributes to the clip where you wnat them to go .... be sure to select only Audio Attributes > Levels and also be sure to turn off "Scale Attribute Times"
you'll still have to go back and clear the original keyframes f, but you'd have to do that anyway.

Adjusting audio volume for all slides?

I can easily do this for one slide, but when I Shift-click to
select all slides, then apply Captivate's Audio / Edit Timing menu
option, the dialog shows me an Adjust Volume option that adjusts
the volume for all slides in the movie. But, when I adjust the
volume and press OK to exit the dialog, the new volume setting is
not saved with my movie. Is this a bug? Anyone?

Hi boonedogr and welcome to our community
In the words of Yoda: Hmmm, seems a bug we have found!
So here is how to make it stick.
1. Click Audio > Edit timing... and you should see the
"Edit Audio Timing" dialog.
2. Click the Insert Silence toolbar button. This should
produce the "Insert Silence" dialog.
3. Change the "Insert" field so it reflects 0.001seconds of
silence.
This step is necessary to trick Captivate into accepting the
audio has indeed changed. I use 0.001 seconds as it is the minimum
you can insert and it should have absolutely no discernable effect
on your movie.
4. Now click the Adjust Volume button to see the "Adjust
Volume" dialog where you can alter the volume level as well as
boost dynamics and whatnot.
5. Make adjustments as desired.
6. Click OK to dismiss the Adjust Volume dialog.
7. Click OK to dismiss the Edit Audio Timing dialog
At this point, you should notice several progress indicators
as the audio clips for all slides with audio are adjusted to
reflect your new settings.
*NOTE: This will have no effect on Background Audio or Object
Level Audio. Those clips will need to be adjusted manually as a
separate process.
Hope this helps a bit... Rick

Output to XDCAM HD - Audio Settings for Final Sequence?

Hi,
If the approval gods are smiling, it'll be time to export several programs back to disc for a client in the next week or so. The original clips and the sequence are all at XDCAM HD 1080i60, 35Mbs VBR. I've ingested using Sony PDZ file transfer with a PDW-F75 deck, and everything looks/sounds great on approval QTs so far.
My question is on the audio settings for the final sequence on to XDCAM disc. I've got 2 tracks of talent audio, 2 of nat sound and 4 of music. If I understand the FCP manual correctly, I have to select 4 mono track outputs when doing a file transfer export of the sequence. What settings do I need to choose so that the mix I hear when I play back my sequence in studio is what anyone down the line will hear when they play back the final sequence I've exported to XDCAM disc? That is, if I've got 8 active tracks, what happens to them with the 4 mono track setting? Thanks very much for any suggestions and advice.
Pat

Agree that the HDV downconvert in the camera is optimal.. but the darn print to video needs to work reliably to GET the hdv material back to the camera
i still have to use iMovie to get my files back to the camera in HDV...
FCP 5.0.4 still doesnt work well

Where can i download audio drivers for early 2006 imac?

please help me to download audio driver for my early 2006 imac that i purchased USED my built-in mic does not work! THANK YOU

It most likely is disconnected or broken if someone has been working on that iMac.
Go to: Apple > About This Mac > More Info and in the Hardware secton select Audio (Built-in) and see if the Internal Microphone is listed there.
If it is, then go to: Applications > Utilities > open Audio MIDI Setup > select Built-in Input and fiddle around with the settings to see if you can get it working.
If not, then you need to have the Built-in Mic serviced and/or replaced.
Alternately there are Mac compatible USB Mic's and iSight Cameras out there that work well with iMac's.

How can I turn off messages for certain Action Center items?

I'd like to find a way to turn off messages for Windows Update, Network Firewall and Windows Backup. Ideally I'd like to do it with Group Policy however I can't find a policy for this. We're deploying Windows 7 right now and we'll need a solution that's domain-wide.Orange County District Attorney

Here's a script I made to uncheck Windows Update, Network firewall, Windows Backup for Windows 7 machines: (Just comment or uncomment both the Hold__ = True lines below)
Note: this only un-checks the boxes
Option Explicit
Dim WshShell:Set WshShell=CreateObject("Wscript.Shell")
On Error Resume Next
Dim HoldReg, HoldProblem, HoldWindowsUpdate, HoldSpyware, HoldInternet, HoldUAC, HoldFirewall, HoldVirus, HoldBackup, HoldCheckUpdates, HoldTroubleshooting
HoldProblem = False
HoldWindowsUpdate = False
HoldSpyware = False
HoldInternet = False
HoldUAC = False
HoldFirewall = False
HoldVirus = False
HoldBackup = False
HoldCheckUpdates = False
HoldTroubleshooting = False
Err.Clear()
'Windows Update
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.103\CheckSetting")
If Err <> 0 Then
    HoldWindowsUpdate = True
ElseIf uBound(HoldReg) < 220 Then
    HoldWindowsUpdate = True
End If
Err.Clear()
'Spyware
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.102\CheckSetting")
If Err <> 0 Then
'    HoldSpyware = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldSpyware = True
End If
Err.Clear()
'Internet
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.104\CheckSetting")
If Err <> 0 Then
'    HoldInternet = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldInternet = True
End If
Err.Clear()
'UAC
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{C8E6F269-B90A-4053-A3BE-499AFCEC98C4}.check.0\CheckSetting")
If Err <> 0 Then
'    HoldUAC = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldUAC = True
End If
Err.Clear()
'Firewall
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.101\CheckSetting")
If Err <> 0 Then
    HoldFirewall = True
ElseIf uBound(HoldReg) < 220 Then
    HoldFirewall = True
End If
Err.Clear()
'Virus
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.100\CheckSetting")
If Err <> 0 Then
'    HoldVirus = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldVirus = True
End If
Err.Clear()
'Windows Backup
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{01979c6a-42fa-414c-b8aa-eee2c8202018}.check.100\CheckSetting")
If Err <> 0 Then
    HoldBackup = True
ElseIf uBound(HoldReg) < 100 Then
    HoldBackup = True
End If
Err.Clear()
'Check for updates
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{945a8954-c147-4acd-923f-40c45405a658}.check.42\CheckSetting")
If Err <> 0 Then
'    HoldCheckUpdates = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldCheckUpdates = True
End If
Err.Clear()
'Troubleshooting
HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{A5268B8E-7DB5-465b-BAB7-BDCDA39A394A}.check.100\CheckSetting")
If Err <> 0 Then
'    HoldTroubleshooting = True
ElseIf uBound(HoldReg) < 100 Then
'    HoldTroubleshooting = True
End If
Err.Clear()
If HoldWindowsUpdate+HoldSpyware+HoldInternet+HoldUAC+HoldFirewall+HoldVirus+HoldBackup+HoldCheckUpdates+HoldTroubleshooting <> 0 Then
    WshShell.run "rundll32.exe shell32.dll,Control_RunDLL wscui.cpl", 1
    Wscript.Sleep 1000
    WshShell.SendKeys("+{TAB}") 'shift-tab
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("+{TAB}")
    WshShell.SendKeys("{ENTER}")
    Wscript.Sleep 500
    WshShell.SendKeys("{TAB}")
    If HoldWindowsUpdate Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldSpyware Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldInternet Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldUAC Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldFirewall Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldVirus Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldBackup Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldCheckUpdates Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    If HoldTroubleshooting Then
        WshShell.SendKeys(" ")
    End If
    WshShell.SendKeys("{TAB}")
    WshShell.SendKeys("{TAB}")
    WshShell.SendKeys("{TAB}")
    WshShell.SendKeys("{TAB}")
    Wscript.Sleep 500
    WshShell.SendKeys("{ENTER}")
    Wscript.Sleep 500
    WshShell.SendKeys "%{F4}" 'alt-f4
    If HoldWindowsUpdate Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.103\CheckSetting")
        If uBound(HoldReg) < 220 Then
            MsgBox "Problem unchecking Windows Update"
            HoldProblem = True
        End If
    End If
    If HoldSpyware Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.102\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Spyware"
            HoldProblem = True
        End If
    End If
    If HoldInternet Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.104\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Internet"
            HoldProblem = True
        End If
    End If
    If HoldUAC Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{C8E6F269-B90A-4053-A3BE-499AFCEC98C4}.check.0\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Firewall"
            HoldProblem = True
        End If
    End If
    If HoldFirewall Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.101\CheckSetting")
        If uBound(HoldReg) < 220 Then
            MsgBox "Problem unchecking Virus"
            HoldProblem = True
        End If
    End If
    If HoldVirus Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{E8433B72-5842-4d43-8645-BC2C35960837}.check.100\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Backup"
            HoldProblem = True
        End If
    End If
    If HoldBackup Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{01979c6a-42fa-414c-b8aa-eee2c8202018}.check.100\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Backup"
            HoldProblem = True
        End If
    End If
    If HoldCheckUpdates Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{945a8954-c147-4acd-923f-40c45405a658}.check.42\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Check Updates"
            HoldCheckUpdates = True
        End If
    End If
    If HoldTroubleshooting Then
        HoldReg = WshShell.RegRead ("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Action Center\Checks\{A5268B8E-7DB5-465b-BAB7-BDCDA39A394A}.check.100\CheckSetting")
        If uBound(HoldReg) < 100 Then
            MsgBox "Problem unchecking Troubleshooting"
            HoldProblem = True
        End If
    End If
    If HoldProblem Then
        Wscript.Sleep 1000
        WshShell.run "rundll32.exe shell32.dll,Control_RunDLL wscui.cpl", 1
        Wscript.Sleep 1000
        WshShell.SendKeys("+{TAB}") 'shift-tab
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("+{TAB}")
        WshShell.SendKeys("{ENTER}")
        MsgBox "Please select options manually"
    Else
        MsgBox "Done"
    End If
Else
    MsgBox "No changes made"
End If
Set WshShell = Nothing

Can character encoding be predefined for certain pages?

Certain pages that I visit frequently require me to manually set my character encoding to Western (ISO Latin 1), both when my default character encoding is set as UTF-8 and Western (ISO Latin 1).
As the pages that show up malformed are embedded in other frames I suspect that the top frame forces a different encoding than is on the embedded page.
An example page is here (847.is). The topic list of this message board is in order, but when any one of the topics is viewed all accented and special characters are missing, until Western (ISO Latin 1) is manually set as the character encoding. Similarly, opening any of the topics in a tab will result in missing characters.
Is there some way for me to circumvent having to go through all those menus to set it? Can I somehow define that these pages should be viewed in Western (ISO Latin 1) or can I set a keyboard shortcut for Western (ISO Latin 1)?
MacBook 2006 Mac OS X (10.4.7) Safari version 2.0.4
MacBook 2006 Mac OS X (10.4.7)

For instance if I opened
an entry on Vísindavefur
HÍ out
of the parent frame the accented letters would
show up somehow mangled, but this is no longer a
problem.
That page has no charset in the source and thus should only display correctly if you have Latin-1 set as the browser default. With UTF-8 set as the default you should see (in Safari) a ton of black diamonds with question marks inside.
Firefox never displays ð (eth), þ (thorn) and ý
(accented y) correctly for me, did not do it on the
old machine and does not do it on this one either,
FireFox displays them perfectly for me in both 10.3 and 10.4.
Actually, if I set Opera encoding to UTF-8 it
displays the topics on 847.is as Safari does.
This indicates it is a system issue rather than Safari. Sorry I can't duplicate it and have no good idea what could cause it on a normal system. Have you (or the place where you buy your machines) by chance installed any special software add-ons to enable the use of non-Unicode Icelandic (for apps like Appleworks, WordX, etc)?

Can you adjust the sensitivity for motion sensor for MBP 13"

I recently notice the clicking noise when I move the laptop, usually sits on my lap. I have been reading this and people talks about disabling it via the 'sudo pmset' command to set 'sms' to 0.
I want to know if there is a parameter somewhere just to change the sensitivity instad of turning this off completely.

I can't see any obvious way to do it using the pmset command, J. , but third party applications certainly do change it for various other purposes, mostly entertaining (see skipchecker for example. You would think, accordingly, that there must be a means of doing so for the HD head parking routines.
Amit Singh has an interesting piece on its use .
I'll let you know if I can find anything else that might help.
Cheers
Rod

Can't apply audio transitions over some sequence joins

I have a rough cut sequence I'm putting together and am trying to apply a cross fade over 2 sequences. For some reason I can't apply the transition over the splice area...it will go to one seq or the other (icon is |= ) other parts work fine (icon is =|= )
There are 6 seq's in this cut 4 transitions work as I expect...2 don't
any ideas what I'm doing wrong???

For every clip you put on the timeline there is a clip in and clip out. The clip also has two physical ends of the media file.
If the clip out of the outgoing clip is the same as the end of the media file, OR, the clip in of the incoming clip is the same as the start of the media file, you cannot place a transition--there must be overlap for most transitions.
Go to the junction between the two clips you are trying to place a transition:
Using the trim tool, drag the clip out of the outgoing clip back an amount equal to 50% of the transition duration
Using the trim tool, drag the clip in of the incoming clip forward an amount equal to 50% of the transition duration
If this created a gap between the two clips, do a ripple delete of the gap.
By dragging the clip in and clip out with the trim tool, you moved them away from the physical ends of the media file you now have what Harm refers to a handles. You can now place your transition.
As Harm said: "Read the manual," and everything will be made known to you.

Can't locate audio file for iDVD 6 Travel Theme

I have looked under Library/Application Support/iDVD/Installed Themes I find only folders for iDVD3, iDVD 4 and iDVD 5. No iDVD 6 there at all! I know I have iDVD 6 installed since I loaded iLife06 last week myself and can both see and hear the Travel Theme graphic and audio theme. Where can it be?
Once I find it, how do I get it into iTunes?
eMac G4 Mac OS X (10.4.5)

Yes! Tonight is the first time I've opened iDVD and that theme started playing. What a marvellous theme it is; it inspires me, sort of sets the level for what I should be shooting for in my scores. I love this kind of music.
And It Should Be Credited to the Appropriate Artist, Apple folks!
There is no mention anywhere of who wrote it (or any of the other audio tracks on any of the sample Themes). The clip seems to be called TravelCards, on which a google search produced information on the composer Simon Fisher Turner (aka SFT), with a CD called Travelcard, but I'll be damned if I can find a downloadable clip to listen to! Some of his stuff is in iTunes, but not this album. From the sound of his other work, however, it could be him. It also bears a bit of resemblance to the work of another British artist, Karl Jenkins (the "Diamond Music" composer, also a founding member of Soft Machine, one of the seminal bands from the 70's).
Whoever it is, I have listened to the sampled phrase over and over and over as it loops in my iDVD window beneath this one... and I haven't gotten tired of it yet! Please if anyone has any idea at all who wrote this, I'd love to know and hear more. Thanks!
iBook G3, PowerBook G4, PowerMac Dual G4 MDD, G3 Yosemite! Mac OS X (10.4.6) I'm eating chicken and spaghetti that Rubem made... it's really good!

Adjusting audio levels for selected parts of clips

1.) How can I select a portion of audio in the Viewer and adjust just that portion's auudio using the Level option?
2.) What is the easiest way to remove parts of audio while someone is speaking and says a quick "ugh" or emits a breath sound?
Thanks!

the problem with removing offending sounds is that you will usually notice the drop out of room tone. In this case, find a clean piece of audio and use that to replace the offensive sound.
This is VERY easy to do in soundtrack pro.
If you are intimidated by the pen tool, you can blade the clip in the timeline and adjust levels on individual sections and add dissolves to make the adjustment gradual.
There are many ways to skin this cat including real time "automation."

Adjusting audio levels for authoring

Hello,
Is it possible to raise the audio levels in Encore so the levels are higher for the muxed DVD than the source audio files themselves? Is there a way to do this in an Encore timeline?
Thanks,
Mtbakerstu

Welcome to the forum.
Audio Level/Gain adjustment will need to be done in PrPro, or perhaps Audition.
Good luck,
Hunt

Can't Adjust Audio

I searched Apple support on this issue to no avail. I'm sure someone knows the answer to this. I'm using Quicktime 7.2 and I'm listening to the streaming audio of a radio station. I'm getting too much bass, but when I bring up the A/V Controls all the sliders are shaded and can't be adjusted. Is there anything I can do to adjust the sound?

True "streaming" media can't be controlled via the A/V Control window of QuickTime.

Adjust audio BitRate for a Quicktime .MOV export

I am trying to export a >MOV file. Settings are Quicktime > H.264 codec. Everything looks and sounds fine, but I am uploading to a TV station and they are saying that the audio BitRate is too low. I can't seem to find anywhere to adjust the audio bitrate in the export settings. There is no option. Unlike when exporting a .Mpeg2 or other formats where it is an option. Any ideas?

Strange. I do not have the option. Are you using CC?

Can't adjust audio keyframes for certain sequences?!

Similar Messages

Maybe you are looking for