Can't Adjust Brightness Using F1 and F2 Keys
My MBP was having difficulties starting up today (stalling at the grey screen w/ the Apple symbol) so I ran Disk Utility to repair, and everything seemed to be fine.
But now all the pre-set function keys are working save the F1 and F2 keys. I've tried pressing the fn keys before, but I am still not able to adjust the brightness. I also tried resetting the PRAM, but that did no good either. Currently, all the other function keys are doing their pre-set commands -- I didn't change any of them. What can I do to get the F1 and F2 keys working again?
Thanks!
My guess is that something you've installed is playing havoc with your system. When you reinstalled Lion you probably didn't do a clean install, thus the problem continued. Try creating a new user, then work in that acoount for a while. If the problem stops, you know the problem exists in your user account only. If the problem continues, its system wide and will require a clean install and reinstallation of your software.
Similar Messages
-
When I reopen my MBP i can't adjust brightness, volume, etc. and it lags
Whenever I shut my macbook pro, and then later come back and open it up again, there are always problems. I cant adjust the brightness, or the volume, or the keyboard light. That is the sure sign that something is wrong. Then programs will start freezing or lagging horribly with the spinning ball. Its basically unusable until I do a hard reset. If I tell the computer to shut down or restart, it will not. It will start to, but then it never actually shuts down, and i am forced to hold the power button down. The problem used to happen once in a while, but now it happens basically every time I shut the computer.
This is horribly annoying and i need to get it fixed. However my computer is about a year and a half old, so its out of warrenty. (No applecare). I really do not want to have to pay to have this problem fixed or looked at.
Here is what I have tried thus far:
Using Disk Utility, repaired permissions and repaired the HD.
Using Disk Warrior, did the same thing and deleted or repaired corrupted files that it found.
Reinstalled OS X Lion
Any suggestions?My guess is that something you've installed is playing havoc with your system. When you reinstalled Lion you probably didn't do a clean install, thus the problem continued. Try creating a new user, then work in that acoount for a while. If the problem stops, you know the problem exists in your user account only. If the problem continues, its system wide and will require a clean install and reinstallation of your software.
-
Display Auto adjust brightness acting weird and flickering
Last couple of months I get a fair amount of flickering on my screen. As far as I can tell, there
is no specific area that it is flickering in. After checking my settings for Auto brightness,, I find that
the box that is there for ticking off "Automatically adjust brightness" is unticked, and the brightness is
moved to around the 3/4 brightness area. I am in my basement which is fairly dark, so basically I am
trying to find out about the flickering that goes on, and have a feeling that when the brightness is diminished, it
causes/caused the flickering. So, I raised the brightness to extreme(right to the end of the scale) and continue
to have the box "Automatically adjust brightness" UNCHECKED. Sooner or later,, something must trip off the
Autobrightness,, because I eventually notice the flickering going on,, then I go to my settings to check the brightness,
and find that the slider is back to 3/4 and still the Autobrightness box is Unchecked. This happens all by itself.
Basically , #1,, whether it is on Auto or Not,, I shouldn't get any flickering, and #2,, my display shouldn't on its own
adjusting automatically the brightness by itself, unless I check the box correct? How can I get my screen brightness
to stick ?To close out my original post, I never did managed to solve my flickering problem. I did every trick in the book, including SMC resetting PRAM etc. So, just as I had given up trying to fix, low and behold, my left side of the
screen one fine morning became rather dim. I knew that something , like backlight had gone on it. So, I still had
lots of warranty, brought it in. This time, because of it being a rather obvious defect upon looking at my screen.
The genius ordered a new LCD and backlight .
So far, no flickering, however, I still have the brightness level that drops down from a full brightness, no matter if I check off "automatically adjust brightness" or not. This being in a relatively dark environment.
I can imagine that there are many people still with this problem, with no obvious solutions that are 100 % effective. -
So my I phone 4s volume has decided to pack allowing only my phone to make sounds when I have an incoming call, I can also here fine using facetime and receiving calls. YouTube, soundcloud, any of I players will no longer play sound. I've restored the phone using iTunes on my laptop and checked all the volumes are turned up and the button at the left hand Side of the phone is in the correct position.
Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.
-
Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?
-
Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial versionCheck System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.
-
why my computer can not adjust the volume up and down althought i have had repair once time in a near day . i must waitting for 15days now it's continue
1. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Is RF can receipt SAPGui if used SAPConsole and telnet
Dear all, can you tell me that a RF terminal with winCE operation system can show GUI if can receipt SAPGui if used SAPConsole and telnet. if not, how should i do(it means which server like telnet should instead)?
Hi,
In WM, if you are using SAP Console, it is recommended to use Telnet Server as an interface between the RF terminals and SAP, there are other third party interfaces available in the market.
Reward if it helps you.
Thanks
Aktar -
Cant adjust brightness through F2 and F3
Hi i cant adjust brightness through F2 and F3 buttoms it show no increase or decrease i have hp notebook pavillion dv6 6000 with amd radeon HD 6650 and amd phenom processor operatting system windows 7(64) kindly for any help with regards
Hi @Hayder-Hikmet ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 6600 Notebook and brightness controls not working correctly. You could try in the Control Panel, Clock, Language and Region, Language click Advanced Settings in the left pane.Then in Advanced settings, click Change Language bar hot keys. In Text Services and Input Languages, click Change Key Sequence button and enable the the key sequence.
Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically. Make sure you remove the USB keyboard first.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I did not backup any docs or pictures. The macbook crashed my fault. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved all my information? Thanks for any imput.
mgott55 wrote:
Can I install my used existing hard drive in a compatible macbook to save everything?
If you need to extract the drive's content you can remove it and install it in a $10 USB enclosure. It will be readable by any recent Mac. -
HAVE A MAC G5 WITH V10.4 TIGER OS, I AM HAVING TROUBLE WITH THE LETTER "N" ONLY WHEN I USE CAPS AND SHIFT KEYS DOSE IT TYPE THE LETTER "N". I HAVE CONNECTED A NEW KEYBOARD BUT THE PROBLEM STILL EXIST. WHAT ELSE CAN I DO?
You might look at "Keyboard Shortcuts" in the Keyboard and Mouse preference pane and see if somehow the lower case n has been inadvertently assigned to something.
Probably the best solution would be to click the "Restore Defaults" button. -
Flash CC won't let me switch between open documents using command and tilde key ( ~ )
In all previous versions of Flash, and most other Adobe software, you could change the active document using command and tilde key ( ~ ) on a Mac. However Flash CC won't let me do this. Is there a bug, or something I need to set up to get it to work? Or is this possibly just expected behavior in the new version of Flash?
I'm on a 2012 desktop with OS X 10.8.4 using a bluetooth keyboard. Cmd + ~ works with all other Adobe programs I have installed including Flash CS5.5.
-
Can't use F5 and F6 keys to adjust brightness of LCD screen
I just bought a new Macbook (first one ever, new to Mac). I can't adjust the brightness of the LCD screen with the Function keys. When I do it, the icon pops up in the middle of the screen showing that it is being adjusted, but it does not change the brightness of the screen. I have turned off the auto adjust based on ambient lighting feature, and still not working right. I can adjust it by going into system prefs, but I would like to be able to adjust it using the function keys... Can anyone help with this? Thanks!
I am an idiot... i was adjusting the brightness on the keyboard backlighting, not the lcd screen.... woops!
-
Can not adjust brightness and minimize and maximize the screen with Fn keys
I have bought a HP 15-D006TU laptop 1 week back. f2 and f3 for adjusting brightness and f4 to minimize and maximize the screen are not working. I am also trying to install the Hotkey driver which is mostly suggested here. but the version available is not supported. Can anyone help me out in this case?
Hi NIdisha,
Thank you for your post, I will do my best to assist you.
I understand that you are experiencing an issue with the brightness and the fn keys. When I looked up the specifications, I see it came with FreeDos. I am providing you links, to the software and driver page for your computer,HP 15-d006tu Notebook PC Drivers and Frequently Asked Questions About FreeDOS (FAQs). Please note the compatible keyboard driver. I would suggest you uninstall and reinstall the drivers for the keyboard. I am also providing you a document on Notebook Keyboard Troubleshooting (Windows 8), that may assist you. If you would like furhter assistance, please let me know if you are still running FreeDos, or have changed the operating system.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Lenovo z570 and Fedora 15 - can not adjust brightness.
When I installed fedora 15 on lenovo ideapad z570 all goes ok. but I can not adjust screen brightness. I updated kernel twice upto 3.0.1 but still problem persists.
Please give me a solution.
CPKulkarniThis is a known bug in the power manager logic within fedora 15. They are testing the package before it makes officially to the repository.
If you want to try it, out run the following command in the bash shell
su -c 'yum --enablerepo=updates-testing update gnome-power-manager'
Also try to disable screen dimming via the control center. Hope this helps you out
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo
Maybe you are looking for
-
I have a dv5-1388 upgrade to Windows 7. No sound from the tv using the HDMI cable. I have looked in the sound folder in the CP and I do not have a HDMI option to click on. Now where do I go from here?? Thanks This question was solved. View Solution.
-
Lightroom Problem: HELP!
It displays this message: "Adobe Lightroom 5 Cannot be opened because of a problem" - "check with developer to make sure adobe photoshop lightroom 5 works with this version of OS X. You may need to reinstall the application. Be sure to install any av
-
Unable to select localization on a new database
Hello, When creating a new database the 'Local Setting' field is inactive (grayed). Any idea what can be the reason? Thanks, Maya
-
All, I was wondering if there is any difference in terms of code between a home interface for a bean and a local home interface for a bean? Do I need any additional code for either of them, or is the behavior strictly governed whether or not I use <h
-
I've had several of my flash drives, (jump drives, thumb drives) sudden stop working on my MacBook Pro running Mac OS X Version 10.9.2, build 13C1021. #1 disk (looks similar to this PNY USB 2.0 Flash Drive, Compact Attaché, 16 GB https://www.google.c