Can't airport modem after update?

Greetings,
I got around to updating from 10.3.5 to 10.3.9 on the G3, and strangely, my Sevy's airport modem utility isn't executable now. It had been the tool to dialup ISP from the G3 via its ethernet to the AEBS, and it had worked fine with 10.3.5. The ethernet connection itself is ok, as the G3 can network, and the iBook can as always dialup via wireless. Suggestions?

I turns out an update for Java was issued shortly after the 1.3.9 update. Installing thata Java update did the trick for me. Airportmodem works now.

Similar Messages

MacBook Airport Issues After Update

Hello. After performing the most recent Software Update, my wireless Airport in my MacBook has been acting erratically. I never had these problems with it before the update and I know it's not the router because other wireless notebooks don't have the problem.
ISSUE: Airport often begins scanning in the middle of an online session without any reason. It then interrupts the session causing a hang while trying to visit other web addresses. It's as if it lost signal and began scanning again. Yet, my signal is always full. Before the update, I NEVER lost signal and never experienced any interruptions. I have verified and repaired all disk permissions. I have reset the router to no avail. Has this happened to anyone else? Does anyone have an idea what can be done?
Thank you.

Same problem! I hope there is someone here who can help us? After updating the recent "firmware" from apple, I've been having connection issues. It's strange...I get a full signal from my airport, but when I scan to find it in Airport Utility it cannot be found. My wife has another Macbook same os, but did not update the "firmware"....guess what?...all fine with her connection to airport. So, I'd have to say it might be an update issue....you think? What can I do? God, someone help....

Can not access BIOS after update BIOS

Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS again

That is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

We can't package links after updating to Mac 10.9.2

We can't package links after updating to Mac 10.9.2

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Hi tania184,
Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

My iPhone 4 can not find network after updating to 7.0.6

my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

Airport issue after update - Status grey / Connection OK - Solved

Hello All,
Just wanted to share an issue I had that was driving me nuts, and then the final solution.
Ever since the recent airport extreme update, my airport status has been broken. The menubar icon has shown up as grey / no signal, and when I click on it, the only option I have is to 'turn airport on' which when selected does nothing.
In spite of this, though, my airport connection for my preferred network is working fine - I just can't select a new network off the list (there is no list, even in internet connect)
This has been a problem since the airport extreme update. Nothing I did seemed to help. Finally, I called apple and spent 45 minutes on the phone with them, doing the obligatory pram resets and power management resets, etc. Nothing seemed to help. We found a way to enter networks manually (go to system prefs / network / airport and add your network there) but the status problem was still there.
After I got off the phone, I went to the apple support page and found the airport extreme software update and downloaded it manually and installed it.
Manually Downloading and Installing the airport extreme update again solved the problem.
I don't know why the software-update version didn't quite work, but installing the update from the website did solve the gray / broken airport status menubar problem.
Just thought I'd share that with everyone, as it's been driving me nuts for the better part of a week.
Cheers!
JayK
Macbook Pro Mac OS X (10.4.8) 2G ram

I would like to confirm that update worked for me too. Actually, I didn't need to do it manually like some of you did. It worked straight away after automatic software update.
My problem was occasional inability to connect to my wireless router. The problem would have been solved by SSID change manually on the router and reconnection.
After the latest update, everything is working flawlessly.
I have (not so known) OZENDA router and didn't have Parallels installed.
MacBook Pro C2D 17'' 2.33GHz Mac OS X (10.4.8)

Airport Problems after update and trouble shooting

Hi There,
I have an Intel iMac and after updating airport i've been having problems with it. I'll be using the internet and all of a sudden it will just disconnect and cannot detect any network connections. Now, i've seen the other posting already about fixing this problem, and I have done what it says to fix the problem by moving the system configuration folder and the com.apple.systempreferences.plist file. After I do this, it works for a few hours but then i have the same problem again. The folder and the file is recreating and i have to follow the same steps and move them again, but then every few hours it keeps getting recreating. Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network. Is there a way to reset Airport to the way it was before i installed the update?
Thanks

"Is there a way to reset Airport to the way it was before i installed the update?"
Of course you can erase your hard drive and reinstall up to 10.4.7, and not go any higher. The problem is the 10.4.8 update, or some part of it. The many other updates recently posted for different apps are not part of the cause, so those updates can be installed.
"Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network."
Yes, once you've followed the "restart twice" instructions involving preference file deletion, it appears that by turning off AirPort before letting it sleep, restart, or shut down, those two files will not get the same corruption recreated. Afterwards, you should be able to turn on AirPort and after a slight delay of about six to eight seconds AirPort will be able to reacquire your network.
If you forget to turn off AirPort before sleep, restart, or shutdown, then those files will again be corrupted and you'll have to go through the process all over again. I ran through it about 50 times, changing this and that, and that's all I could come up with.
Hopefully someone else out there with a different perspective will be able to figure out what else needs to be done.

Can't access internet after updating to firmware 7.3.1

After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

AC100 doesn't see the built in 3G modem after update to kernel 2.2

Hello everybody!
Does someone have a solution for this issue?
I've had the AC100-10V for quite a few months and everything worked fine until I have upgraded via Servie station to Android 2.2.
Now there is *no sign* of the built in 3G modem in the system. *I cant use it anymore.*
*All menu entries regarding to this feature and also the icon for mobile networks disappeared!*
What can I do to get it working again?
Please help me!

There is no problem with my AC100-10V after update - 3G works as expected.
Did you try resetting the device? (Factory reset)
Consider finding a Toshiba service and return it on warranty.

Airport Express After update won't work

After updating my desktop Mac to Leopard and updating my AirPort Express to firmware to v6.3, the Express refused to restart. I've tried resetting it and have left it unplugged for a few days. The latest Airport utility can't find it, and it just flashes yellow. I've been using this hub for the last two years without a problem. Fortunately it does not supply my wireless network with the Internet. I am using this hub for AirTunes. What can I do?

just do a hard reset (http://docs.info.apple.com/article.html?artnum=108044 ) of the airport express and the airport administration utility will recognize it again. However, you will lose the configuration of the airport express. I hope that helps.

I can't connect wifi after updating Windows.

I installed Windows Embedded 8.1 Industry Pro. And I have 49 important updates. But after updating, I can't connect my wifi. Then I restore system, I can connect again. I have did this some times
Before, I had installed Windows 8.1 Pro, it was the same problem.
Please tell me solution. My laptop is Acer Aspire m3 481 which is installed Qualcomm Atheros AR5BWB222 wireless driver

Download the latest drivers for the Wireless network card that are applicable to Windows 8.1.
You can check with Acer on this.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
I did. but it was not fixed. after updating, I can't connect wifi until I restore current system.

Can't replace APN after updating to OS4. It still remembers "Disable3G...."

Can't chage APN configuration after updating to OS4. Already tried iConfiguration program but it does not work. The screen appear "Profile failed to Install - Only one APN configuration can be installed at a time."
I guess it was from the profile that I installed from iphonenodata.com. I did not remove the profile before I updated to OS4. I can't see the APN field when I use my main number which is the Apple official carrier in Thailand (DTAC). I made a try by using AIS simcard as I can see APN input. I could change the APN and use GPRS. But once I replaced the sim card back to DTAC, the "disable" profile comes back again.
Please suggest. Or do I need to reset as new phone? But .. then how can I get all contents back? I have so many data i.e. personal finance, health, etc.
Many thanks,

Now I solved the solution!!!!
Refer to this post http://discussions.apple.com/thread.jspa?threadID=2470873&stqc=true
To briefly saying, I deleted the file 8218978e4ab0a48035bb92653145a6be872ea858 in the backup directory. Then I restored from the backup (without backing up again during the restoration, if iTunes asks). As per "Loveturtle" in the mentioned post said, the file 821xxx contained the corrupted APN. If you want to try it out, read the post for clearer explanation.
However, I didn't success at the first attempt. I did it twice on my laptop and once on my office PC, and succeed on the latter. Not sure what happened for the first two attempts. The results: everything's back (contact, sms, app data, photos), but music and video gone but I can sync from my iTunes later. Only annoying just the messy app icons arrangement. MMS not working if Cellular Data is off - but that's what it is supposed to be as an original setting device.
Good luck!

I can't open iCal after updating Mountain Lion

After updating Mountain Lion, I can't open iCal. It keeps reopening and sending report to Apple if I press restart.
What can I do?

Welcome to Apple Support Communities
Open Finder and delete:
~/Library/Caches/com.apple.iCal
~/Library/Preferences/com.apple.iCal.plist
If it doesn't help, press Command and R keys in boot and reinstall OS X

Can't upgrade iPhoto after update os to mavericks

After update os mountion lion to mavericks I can't open iPhoto also its not in lunchpad and applications
when I try to upgrade iPhoto give this error :
"These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications."
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
"There was an error in the App Store. Please try again later. (null)"

Log in using the Apple ID that was used to purchase iPhoto (or used to set up the computer if it came on the computer). Other than that contact App store support the link is on the right od the App store window
LN

Can't airport modem after update?

Similar Messages

Maybe you are looking for