Can't AirPrint through belkin surf+ router

Hi, I am trying to print from my iPad, iPhone through AirPrint and trying to print through my iMac and MacBook through standard wireless, neither are working. I have a basic router which will allow me to print through AirPrint but it's a really slow router. I have a hp b110a photosmart printer, I know it does AirPrint. My router has the latest firmware update. Ivetried switching off or on every setting I can see around the wireless part and firewall par, but still no joy. Can someone help, please

Try iPad/iPhone forums. Not going to get much AirPrint stuff in the Apple TV area.

Similar Messages

E65 can't get through my wlan router

My Nokia E65 can't get through my wlan router. Can anybody help?
When using wireless at home I can browse the wifi-router homepage (192.168.0.1), but the Internet application won't load internet pages.
I've tried different security settings, even totally open. Always the same at my TrendNet TEW611 BRP using default settings. At other routers internet is ok.
What's strange is that the SIP phone application gets through, so I can make phonecalls but no internet. Can anyone explain this?

try to connect using WiFi connection manager like HandyWi, www.handywi.com, if that still doesn't work when it's probably something wrong with the settings on your router. Can also be that the page your are trying to load is too large for the mobile browser to process.

Time Machine through Belkin Wirelles Router

I have connected my External HDD to MacbookPro13" thro USB and clicked Time machine. It asked to permission to format and i did "yes" to proceed with back-up. After back up complete, I connected the hard drive to the USB port in my BelkinN+ wireless router, and tried to browse the files in it through shared section using my macbookpro. But I can't access the hard drive or back up in it over wireless. (the same hard drive before formating and back up, i used to browse through shared section using the routers USB port). How can I back up this hard drive/ browse the files in it?

Sorry, but unless the router meets this condition, you can't use it for Time Machine backups: +*If your backup disk is on a network, the network server must use Apple File Protocol (AFP) file sharing, and both your computer, and the networked backup disk, should have Mac OS X 10.5.6 or later.+* See: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
In addition, backups done to a local disk are stored differently than those done over a network. Just why that is, I don't know, but surely Apple wouldn't do it differently without a good reason. What that means, of course, is that you cannot start backups directly-attached via USB or FireWire and then continue over a network, or vice-versa.

Can't AirPrint after installing new router

After installing a new Virgin media router I can't print from my iPad or iPhone to my Airprint Epson printer. Works perfect from my Macbook pro on Lion. Worked fine before installing the new router on iPad and iPhone. Any ideas ?

OK fixed it. Had to Manually set up the printer to link to the wifi again from the printer control pad and now I can see it on my iPad and iPhone again. Good days.

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

Is it Wireless you're trying to connect with?
Which Mac?
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Belkin Surf Wireless Router / Modem

Just bought a Belkin Surf N150 Wireless Modem Router and discovered that my Curve 8520 won't connect to it - tried all processes.
Can I make any alterations to the router to make it work?
Can I make any alterations to the Curve to make it work?
Do I have to buy a different router and if so, what one works?
Thanks
Mike Thomas

The AirPort Expess (802.11n version) could be configured to "join" the Belkin wireless network using wireless only and then provide an Ethernet signal to the AirPort Extreme. As I said before, this is a bit goofy, but it will work.
The weak point of this type of setup is that everything going through the AirPort Extreme will depend on a wireless "hop" back to your Bellkin router. Wireless can pick up interference, suffer slow downs, drop outs etc. as you are well aware. If you are planning to stream high definition video, wireless would be your last choice.
For about the same cost as an AirPort Extreme, I would suggest a pair of Ethernet powerline adapters to establish an Ethernet connection between the Belkin and the Airport Extreme. Reason...you'll have a better, more reliable connection.
In order of connection quality, the order would look like this:
Ethernet cable
Powerline
Wireless
It's up to you.

I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

Find the documentation for your router and look up "Reset to Factory Defaults." This process will put the router back to the way it was when you bought it.

Can I reuse my old Belkin wireless router as an extender to extend wifi from Time Capsule?

I plan to buy the new Time Capsule and use it as my wireless router. Would it be possible to use my existing Belkin Play router as an extender of the "new" wireless netword provided by the Time Capsule?

Apple designed the "extend a wireless network" function as a proprietary feature to only work with other Apple routers, so it would be extremely unlikely that a Belkin product would be compatible with the Time Capsule if you want to extend the network wirelessly.
If you can connect the Belkin router to the Time Capsule using a wired Ethernet connection, you should be able to configure the Belkin router to provide more wireless coverage that way.

Can i use a belkin wireless g router with an iMac

can i use a belkin wireless g router with an imac

It will work. The wireless card in iMacs (recent ones) work with n, g, and b networks. The g protocol is slower (54 mbs) versus n (130 mbs up to 300 mbs). My employer has hundreds of such access points and has been updating them all to n, but there are still some g routers they haven't gotten to, and they work fine. 54 mbs is not bad, it's about 5 megabytes/sec roughly. Typical actual throughput is lower than these numbers by ~ 50%, so doing a large Mac OS update download of 300 Megabytes would take about ~ 2 minutes with a g router, and maybe a bit less than 1 minute with an n router.

Can't connect through router

I've had the same setup for two years, and everything was functioning fine until two days ago, but now I can't establish a wi-fi connection to a laptop or a connection to a desktop through a WRT54G router. I can connect to the network on the laptop, but a red X appears between the router and the internet icons in Network Sharing. When I open a browser on the desktop I receive "Server not found". A direct ethernet cable connection from the modem to both computers works fine.
I have power cycled all devices, I have reset the modem and the router, and I have tried different cables. I have also tried a second WRT54G router, but the same thing happens. Any suggestions would be greatly appreciated.

Thanks for the reply. I initial powered everything down, disconnecting all cables and cords on both routers and the modem. When that didn't work, I went into the modem's configuration page and hit the "Factory Reset" button. I also pressed the reset button on the back of both routers and went in and set it up again with the SSID I used before.
A wired connection from the modem to the router and from the router to my desktop returns a "Server Not Found" message when I open a browser. I think the fact that both a wired connection from the modem to my laptop and from the modem to my desktop works indicate a router issue, but I can't be certain. You mentioned a configuration problem or a wifi issue, can you recommend a setting or place on the router's configuration page where I might be overlooking something? Thanks for the help.

I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

WRT150N v1.1: Can't connect through router, internet light isnt on

Recently there was a thunderstorm last week and it somehow shorted out my cable modem. (It was hooked up to a surge protector and still somehow got damaged..) The router seemed to be fine, however, after having replaced the modem, my desktop can't connect through to the internet nor my laptop on it's wifi. The internet only works when I direclty link the modem to my desktop/laptop.
I've tried unplugging the modem and router for 30 seconds then re-plugginging the modem, waiting for initialization, then booting up the router but i've found no luck in getting it working as it used to.. I searched up past posts, and the "Setting-Up a Linksys Router with Cable Internet Service" doesnt say what to do if the light for internet doesnt turn on.
Another odd thing the router does is that, for some reason, the 3rd port for ethernet is lit up when theres no cable in the port. I checked to see if the light would work in other ports when it was connected and it shows to work fine, just with the additional 3rd port constantly on.
I'm not sure if it helps, but after hooking up the router I pinged it and it responded with:
C:\Documents and Settings\Administrator>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
C:\Documents and Settings\Administrator>
Anyone know how I can get this router working again?

Hm, i didn't see any change in anything after completing the steps.. I just had my cable/internet provider service technician come over and take a look at it. Basically, he told me the modem is probably fried somewhere and said I should invest in getting a new router. Surge protectors are apparently just a pretty name for "a good way to blow out multiple expensive devices." So now I'm out to get a wrt160N

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work.

I have an iphone 4s, and i can not connect to any wirless router through wifi??

i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
any help??!!

Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.

Can't connect to Wireless N Router at N speed

I'm new to Mac and not very savvy with networking, but this has me stumped. I just recently purchased a new MacBook (Jan 2010). I had no real issue connecting to my home network through my Linksys WRT54G Router, but it only ran at 54Mbit/s. I purchased a new Linksys WRT120N Router, and still only connect at 54Mbit/s!
What's aggravating is the fact I can connect to my neighbor's Belkin Wireless N router at 144Mbit/s, so I know it's capable of higher connection speeds. In fact, my MacBook keeps dropping my secured home network connection and automatically connecting to his unsecured wireless network!
Any suggestion on how I can get my MacBook to connect to my Linksys Wireless N router at the speed it connects to my neighbors?
I also have a Windows Laptop with a Wireless G card, so I have to leave the setting on auto or I can't connect it the the network.
Thanks for any help!

I spoke with Linksys Tech Support and they had me change from WPA to WPA 2. More info under About this Mac now reports:
PHY Mode: 802.11n
BSSID: 0:25:9c:5:73:61
Channel: 9
Network Type: Infrastructure
Security: WPA2 Personal
Signal / Noise: -45 dBm / -96 dBm
Transmit Rate: 59
MCS Index: 6
Where it was reporting PHY Mode 802.11g before, but still only shows a transmit rate of 59, over the transmit rate of 54 before.
Unfortunately, the Chat Session with Linksys was cut off before I could ask why, or how to fix it!
This is what my neighbor's router is reporting through More Info:
BelkinN_Wireless582902:
PHY Mode: 802.11n
BSSID: 0:22:75:58:29:2
Channel: 1,1
Network Type: Infrastructure
Security: None
Signal / Noise: -79 dBm / -97 dBm
I noticed his Channel listed as 1,1 as mine is 9. Would this indicate he could possibly have a dual channel router and thus the higher speed?
When I run the Network Utility, it reports a Link Speed of 72Mbit/s where that was 54Mbit/s before changing to WPA 2. Is 72Mbit/s the best I can hope for out of this router? Thanks again...

Can't AirPrint through belkin surf+ router

Similar Messages

Maybe you are looking for