Can´t apply December CU 2013 for SharePoint Server 2010

Hi !
I am trying to apply december CU 2013 in or SharePoint Server 2010 (SP2) Farm.
1. I downloaded the december CU 2013 (KB 2849971)
2. Installed it on every server in the farm. (No Problem)
After the installation i was trying to run the Configuration Wizard on my first application server, but then it says that i missing the Hotfix 2849971 (Server1) that i newly installed. I tried to reboot the server, but the same
happens again.
Tried to install the CU again but then it says that th CU has nothing to apply. (Well i got i already)
Anyone  who has any advice what i should do, i am stuck on this?
//Matt 

Run Get-SPProduct -Local on the problematic server, wait a few minutes, and then attempt to re-run the Config Wizard.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • I want to setup a Disaster Recovery Server for Sharepoint Server 2010

    There are four production server running sharepoint server 2010 and one SQL server for
    ContentDB management.

    DR depends upon your backup stratgies, i.e
    1) if you taking full backup of sharepoint using SharePoint tool
    2) If you taking just SQL backup( Content DB and Services DB).
    3) using the 3rd party tool for backup and recovery.
    apart from above, you also have make a decision what point of time you want recovery.
    from your questions, what i think for you.
    Setup new farm with same SharePoint level.same customization, same services configuration, and same number of web apps.
    then backup from Prod server( SQL content DBs) and then restore into new farm and mount them.
    this is one time thing, Now you have to make decision, how data move from Prod to QA( i mean frequency i.e daily, monthly etc).
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Product installation failed July 8, 2014 Cumulative Update for SharePoint Server 2010

    HI
    when i apply cumulative update ubersrv2010-kb2883005-fullfile-x64-glb
    its showing the message , product installation failed
    i already installed service pack 2 
    adil

    adil

  • Download link for RBS SharePoint Server 2010

    I'm trying to download rbs_46.msi  sql server 2008 for sharePoint server 2010 on the link below:
    http://download.microsoft.com/download/E/4/8/E48816F7-4612-432E-B135-0F90C0211701/RBS_X64.msi
    but it give me these error msg:
    File not found
    Firefox can't find the file at http://download.microsoft.com/download/E/4/8/E48816F7-4612-432E-B135-0F90C0211701/RBS_X64.msi.
        Check the file name for capitalization or other typing errors.
        Check to see if the file was moved, renamed or deleted.
    there is two download links for RBS in this article the first one for SQL Server 2008 R2, and the second one for SQL Server 2008 witch is not working.
    http://technet.microsoft.com/en-us/library/ee748631%28v=office.14%29.aspx
    i need active download link please

    oh, thank you. I ask my security team and there is no blocking from them. I want it for SQL Server 2008 with sp1 and cumulative update package 2 not for SQL Server 2008 R2.
    you can found that there is two download links for RBS in this article the first one for SQL Server 2008 R2, and the second one for SQL Server 2008 witch is not working.
    http://technet.microsoft.com/en-us/library/ee748631%28v=office.14%29.aspx
    thanks

  • Installing Update Rollup 7 for Exchange Server 2010 SP3

    Hi,
    I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
    Thannks!
    Wave~Chaser

    Hi,
    When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
    be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    and please find below event log:
    Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
    on turning on logging support.
    Can you please help me with this error.
    Thanks

  • Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

    Hi all,
    I installed SharePoint server 2013 on Windows  server 2012 R2 using VirtualBox.  I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
    the DC server.  Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
    admin page, it gives error info:
    System status:  The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
    a good state and try again.
    Search Application Topology:  Unable to retrieve topology component health states. This may be because the admin component is not up and running.
    From event viewer, I see following errors:
    (1) Error From source: SharePoint Server
    Application Server Administration job failed for service instance  Microsoft.Office.Server.Search.Administration.SearchServiceInstance
    (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The object you are trying to create already exists. Try again using a different name.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.  
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
    isAdministrationServiceJob)
    (2) Error From source: SharePoint Server Search
    Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
    Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
    (3) Warning from source: SharePoint Server Search
    A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description:  Error ordinal: 1 Message:
    Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
    System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    (4) Error From source: SharePoint Server
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
    (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
    been upgraded.  
    Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
    Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
    Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
    Thanks a lot.

    Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
    Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
    Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
    $IndexLocation = "C:\Search"  #Location must be empty, will be deleted during the process!
    $SearchAppPoolName = "SSAPool"
    $SearchAppPoolAccountName = "mydomain\admin"
    $SearchServiceName = "SSA"
    $SearchServiceProxyName = "SSA Proxy"
    $DatabaseServer = "W12R2DC1"
    $DatabaseName = "SSA"
    $spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
    if (!$spAppPool)
     $spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
    $ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
    if (!$ServiceApplication)
    # process stays at the following step forever, already one hour now.  
    $ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer  $DatabaseServer -DatabaseName $DatabaseName
    Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
    (1) Crawler:Content Plugin under source Crawler:Content Plugin 
    Content Plugin can not be initialized - list of CSS addresses is not set.
    (2) Warning for SharePoint Server Search
    A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description:  Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2   
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    (3) Error for SharePoint Server Search
    Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
    Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
    (4) Error for SharePoint Server
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded. 
    (5) Error Shared Services for SharePoint Server Search 
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
    Reason: The object you are trying to create already exists. Try again using a different name. 
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name. 
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
    Above errors keep being generated. Last step for SSA creation stay there forever.  Any clue what is really going on?  Thanks.

  • How can i  apply this  java program for  a jsp page?

    import java.io.*;
    import java.util.*;
    public class FileProcessing
      //create a vector container  for the input variables
         Vector variables = new Vector();
      //create a vector container for the constants
         Vector constants = new Vector();
      /*create a string expression container for the equation
         as read from the file */
         String expression = " ";
      //create double result container for the final result
         double result = 0;
         public boolean processFile(String filename,String delim)
          //index for values vector
              int num_values = 0;
          //index for constants vector
              int num_constants = 0;
          //current line being read from the external file.
              String curline = " ";
          //start reading from the external file
              try
                   FileReader fr = new FileReader(filename);
                   BufferedReader br = new BufferedReader(fr);
                   while(true)
                        curline = br.readLine();
                        if(curline == null)
                             break;
                    //determine the type of current interaction
                        boolean variable = curline.startsWith("input");
                        boolean constant = curline.startsWith("constant");
                        boolean equation = curline.startsWith("equation");
                        boolean output = curline.startsWith("result");
                   //on input variables
                        if(variable)
                          StringTokenizer st = new StringTokenizer(curline,delim);
                          int num = st.countTokens();
                          int count=0;
                          while(st.hasMoreTokens())
                               String temp = st.nextToken();
                               if(count==1)
                                    byte b[]= new byte[100];
                                    System.out.println(temp);
                                    System.in.read(b);
                                    String inputval = (new String(b)).trim();
                                    variables.add(num_values,inputval);
                                    num_values++;
                               count++;
                        // on constant values
                        if(constant)
                             StringTokenizer st = new StringTokenizer(curline,delim);
                             int num = st.countTokens();
                             int count = 0;
                             while(st.hasMoreTokens())
                                  String temp = st.nextToken();
                                  if(count==1)
                                       byte b[]= new byte[100];
                                       System.out.println(temp);
                                       System.in.read(b);
                                       String cons = (new String(b)).trim();
                                       constants.add(num_constants,cons);
                                       num_constants++;
                                  count++;
                        // on equation
                        if(equation)
                             StringTokenizer st = new StringTokenizer(curline,delim);
                             int num = st.countTokens();
                             int count = 0;
                             while(st.hasMoreTokens())
                                  String temp = st.nextToken();
                                  if(count==2)
                                       this.expression = temp;
                                  count++;
              // now we are ready to evaluate the expression
                       if(output)
                          org.nfunk.jep.JEP  myparser= new org.nfunk.jep.JEP();
                          myparser.setAllowAssignment(true);
                          for(int i=1;i<variables.size()+1;i++)
                             String name = "arg"+Integer.toString(i);
                             myparser.addVariable(name,new Double(variables.get(i-1)
                                                .toString()).doubleValue());
                          for(int i=1;i<constants.size()+1;i++)
                               String name = "arg" +Integer.
                                         toString(i+variables.size());
                               myparser.addConstant(name,new Double(constants.get(i-1).toString()));
                   //output is obtained as follows
                          myparser.parseExpression(expression);
                          result = myparser.getValue();
                          System.out.println("Assay value: "+result);
              catch(Exception e)
                   System.out.println(e.toString());
              return true;
         public static void main(String[] args)
              FileProcessing fp = new FileProcessing();
              fp.processFile("input.eqn",":");
    }//my text file name is: "input.eqn" (given below)
    input:Enter Value1:arg1
    input:Enter Value2:arg2
    input:Enter Value3:arg3
    constant:arg4
    constant:arg5
    Equation:arg1+arg2+arg3
    result:

    how can i apply this java program for a jsp pagewhy do you want to do this ?
    Your program reads from a file on the disk and formats based on a patterm.
    Jsp is not intended for such stuff.
    ram.

  • Can we apply attribute change run for datatarget (Master data )

    hi,
    can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
    pls advice how not to make the error repeat even after successful loading of master data.
    Thanks in advance, quick responce is greatly appreciated.

    Hi all,
    i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
    coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
    i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

  • Support for SharePoint Foundation 2010 on Windows Server 2012 R2

    I have located an article that states that SharePoint Server
    2010 is supported on Windows Server 2012 R2.
    http://support.microsoft.com/kb/2724471
    However, I deal with a large number of farms that are based on Foundation.  Honestly, I interpreted this article to mean both Server and Foundation were supported, but I'm receiving some resistance from consumers because there is no definitive statement
    of support from Microsoft re: Foundation and the R2 o/s.
    Does anyone know definitively whether foundation 2010 is supported on 2012 R2 or not?  And more importantly, is there some article on the subject I can reference? (I've searched without success).
    I suppose the conservative approach would be to assume it is NOT supported unless I can find information to the contrary.

    I think there need to be other considerations than "because it sounds good" (which is what the 2012 R2 decision almost sounds like it boils down to). Rather, the consideration should be made of what best supports the application, what version of the OS is
    widely used and known, what happens when we encounter new issues due to using a newer OS that is less used with this application?
    At least, that would be my argument. Same reason I would not deploy SharePoint 2013 to 2012 R2 when support arrives with SP1 -- 2013 with Server 2012 is a well known combination with many resources available for non-paid support.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SharePoint Server 2010 can't connect to the Configuration Database

    Hi Techys,
    I have  a SharePoint Server 2010  Farm, and I have Installed SharePoint SP1 package,
    Then I,m trying to run the SharePoint configuration wizard, That time i have the below error.
    "Can't connect to the Configuration Database"
    I have checked all the services belongs to the sql server and SharePoint server.
    here i found, SharePoint Timer service is automatically Stopped while browsing the Central admin url.
    Please help me to resolve the above issue.
    Many Thanks,
    Madhu

    What you mean error in Config wizard, could you please share the complete error log?
    For Timer Services, check under which account it is running and check event log why its stoped?
    for CA error there are couple of possible reason for this:
    Make sure SQL related instances / services are running fine.
    Make sure your farm admin account have permission on config DB.
    Make sure Config Database Exist.
    Make sure you can connect to SQL server from your APP /WFE.
    If everything is running fine, then you may need to reconfigure the sharepiont products and technologies configuration wizard. The issues might be because of the update that might have installed some additional components for installation.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • License Question for SharePoint Foundation 2010

    I have a question as it regards to the user agreement for SharePoint Foundation 2010. 
    When I deploy code to the front-end of the Foundation service which directly modifies the code on the front-end to make the system do anything different out of the box, does this mean I have violated the code agreement. 
    For instance, using JQuery to manipulate the look and feel of a form, use third party tools like SPServices, attach SharePoint Designer workflows, modify the server end by using STSADM command line to turn features on and off, create and deploy site
    collection features using Visual Studio, or create web parts? 
    Also, if I am using this software for business purposes of any kind, does it mean I need to purchase the software?
    I have received a copy of Share Foundation along with a Server 2008 R2 OS which was purchased. 
    IF I use Foundation to run my business processes, am I in violation of the user agreement and do I need to purchase SharePoint Server 2010 with CALs?

    The official answer: "I'm not a licensing person. Please contact Microsoft."
    In general:
    Foundation is a "free" download, but can only be installed on Windows Server. You can install Foundation 2010 on Windows 7, but only for testing/development, not as a production server.
    Foundation is "free" in that it is licensed as part of the Windows Server it is installed on.
    If you have 500 users, then Windows Server will need to be licensed for 500 users. The Windows Server licensing will also depend on if the users are internal or on the internet.
    SQL Server: If you are using SQL Express, then no license costs, but the number of SharePoint users may impact the licensing costs of your SQL Server.
    The choice between Foundation vs. Standard or Enterprise is the list of features needed and scalability (how many users?).
    "JQuery, SPServices, SharePoint Designer workflows, STSADM, Visual Studio..."
    None of those will impact your licensing. Anything that you do to directly query or manipulate the SQL tables will impact your support. SharePoint is a platform and you are expected to configure and customize it.  
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • How to develop custom add-in for sharepoint designer 2010

    Hi ,
    Can anybody suggest me how to create a custom add-in for sharepoint designer 2010?
    Are there any templates through which i can create a managed add-in using C#? or developing COM add-in (VB6) is the only solution?
    Please suggest.
    Regards
    Sujasree

    Hi,  Sujasree
           Based on my knowledge, there have not been public samples and walkthroughs for SharePoint Designer 2010 add-in.
           MSDN provides some sample for Word and Excel: 
    Office Development Samples and Walkthroughs:
    http://msdn.microsoft.com/en-us/library/z63ctsh2.aspx
           Additionally, VS 2010 have not provide such templates yet.
           So would you please share your business requirement with us?
           SPD is a just client to manage and customize SharePoint site, its powerful but difficult to do extension.
           You could also consider builting your custom add-in elsewhere, e.g.: in a customized admin page or webpart, which is easy to achieve.
           Hope this can help!
    Best Regards,
    Aaron

  • Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

    Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
    Saidireddy

    Hi
    your little question, could have a big big answer, or answers ;)
    To complete your question, ai will try
    Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
    Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
    Depends on you to read, learn and ask , punctually about one issue/problem/request
    I recommend you to bing the net
    http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • How can we define no of processors for a server

    How can we define no of processors for a server.on what factor that No of Processors depends? Is it based on
    1.Application type,
    2.No of transaction perday,
    3.No Of users connected simulatneoulsy

    You can also add the quality of the application to your list. A poorly writtern application cangobble up resources faster than you can spend.
    Also, the size of the database. Bigger size means increased memory, disk, and CPU.

  • Share your feedback for SharePoint Server 2016 on UserVoice!

    Microsoft has opened up a UserVoice to receive customer feedback on what you would like to see in SharePoint Server 2016. Go to the UserVoice site to provide feedback!
    Customer Feedback for SharePoint Server
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

    Hi,
    Thanks for your sharing.
    It will benefit many other users, and we really value having you as a Microsoft customer.
    Have a nice day!
    Best regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

Maybe you are looking for