Can't apply Graduated Filter and Radial Filter in LR5 (photo becomes grey box)

Hi,
I am using the Lightroom 5, every functions are working fine, except the Graduated Filter and Radial Filter casuing me a problem.
When I click on the Graduated Filter / Radial Filter button, and trying to apply the filter (i.e. draw the eclipse) on my photo, my photo in the central pane immediately turns grey, as per below screenshot.
I have to click the Library Module and then click Develop Module in order to get back the photo showing in the central pane, but the same problem appears if I tried to use the Graduated and Radial Filters.
Anybody knows the root cause and solution ? Please kindly help. Thank you !

The easiest thing should be to simply apply the preset to an image, then choose to Update with Current Settings and make sure Graduated Filter is unchecked. Move through all of your presets like this.
I don't know how many suspect presets you have to go through, but you can also manually edit them with a simple text editor to remove the Graduated filter. If you right-click on the preset, you can show in Explorer/Finder. Open the file in Notepad/TextEdit and simply remove the GradientBasedCorrections section (this has many sub-fields, most of which start with "Local"). Save the file and move on to the next.

Similar Messages

  • Will LR get the new brush feature added to the graduated filter and radial filter like the latest version of Camera raw?

    Will LR get the new brush feature added to the graduated filter and radial filter like the latest version of Camera raw?

    OK, at least I can look forward to it and use Photoshop & CR instead of LR for these filters until then.
    Thanks

  • How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

    How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

    LRP
    Thanks for the follow up.
    In Premiere Elements 13/13.1, your export choices are in the Publish+Share section of the project. There are several choices and sub-choices.
    Example: Publish+Share/Computer/and then a list of choices under that, such as, MPEG, AVI, AVCHD, XAVC-S, Windows Media, QuickTime, Image, Audio.
    And each has Presets which define the export settings. Adobe offers default settings which are usually optimized ones. But, it also allows you to customize the preset selected. You do that by clicking on the Advanced Button of the selected preset and customizing the settings under the Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
    From what you wrote, I thought that you might be asking about exporting a video with a video codec = Photo JPEG.
    To do that you would to to
    Publish+Share
    Computer
    QuickTime
    with Presets = either the one for 4:3 of 16:9 as appropriate for your project,
    and then clicking on the Advanced Button, and then the Video Tab under the Advanced Button.
    Then selecting Photo JPEG for the video codec field.
    Tip: The QuickTime choice is not seen unless you scroll down the list of Computer choices. Use the thin scroll bar to the right of the Computer choices.
    Please explore Premiere Elements 13/13.1's Publish+Share/Disc/DVD with standard or widescreen preset for your creation of the DVD-VIDEO on DVD disc.
    The Premiere Elements timeline destined for this choice could consistent of supported photos and or videos.
    Please consider.
    Any questions and need clarification, please do not hesitate to ask.
    ATR

  • Can you remove a date and time stamp off a photo that has already been taken?

    Can you remove a date and time stamp off a photo that has already been taken?

    only with Photoshop or similar software that offer some clone/heal feature.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?    Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?

    I have 2 questions about the new Photos app for Mac (I'm running 10.10.3 on my MacBook Air 1.8GHz Intel Core i5 mid 2012)):
    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.

    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    You can, but I would wait, until you have have been working with Photos for some time and are sure, that everything migrated well. There may be hidden flaws in your library and teething problems with Photos. Don't be in a hurry to abandon iPhoto completely. You may need to go back, until bugs have been fixed.  Th Photos Library does not duplicate the photos in your iPhoto Library. the media files are shared and do not need extra space: See:  Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.
    If you have enough iCloud storage.  But Photos will still need space for local thumbnails on all devices.
    See:  Apple - OS X - Photos Preview
    Fill your library, not your device.
    iCloud Photo Library can help you make the most of the space on your Mac. When you choose “Optimize Mac Storage,” all your full-resolution photos and videos are stored in iCloud in their original formats, with storage-saving versions kept on your Mac as space is needed. You can also optimize storage on your iPhone, iPad, and iPod touch, so you can access more photos and videos than ever before. You get 5GB of free storage in iCloud — and as your library grows, you have the option to choose a plan for up to 1TB.

  • I go onto ordinary websites and then all of a sudden this grey box appears on the middle of my screen, then it automatically restarts my computer. I am not really sure what to do and how to get it fixed

    I go onto ordinary websites and then all of a sudden this grey box appears on the middle of my screen, then it automatically restarts my computer. I am not really sure what to do and how to get it fixed. Any help would be great. Thanks

    what does the box say?  Is is a black box with grey writing?

  • Confusing about Message filter and Content filter

    I have a message filter do quarantine action:
    badbody: if body-dictionary-match("badbody", 1) {
    quarantine ("Policy");
    deliver();
    also I write a content filter 'good' to see what spams are missed by Ironport Antispam:
    Conditions (only if all conditions match):
    header("X-IronPort-Quarantine") != "^Policy$"
    header("X-Spam-flag") != "^(?i)YES$"
    Action:
    duplicate-quarantine ("good")
    deliver()
    I think these two rules could not occur both, because the filter badbody had sent the spam to quarantine 'Policy',
    there's no possible to dumplicate to qurantine 'good'.
    But it happens:
    Tue Jun 17 18:52:55 2008 Info: New SMTP ICID 26146919 interface InNet (10.68.2.161) address 61.135.132.136 reverse dns host websmtp.sohu.com verified no
    Tue Jun 17 18:52:55 2008 Info: ICID 26146919 ACCEPT SG ICP match .sohu.com SBRS 5.5
    Tue Jun 17 18:52:55 2008 Info: Start MID 10698519 ICID 26146919
    Tue Jun 17 18:52:55 2008 Info: MID 10698519 ICID 26146919 From: <mia_kma3998>
    Tue Jun 17 18:52:55 2008 Info: MID 10698519 ICID 26146919 RID 0 To: <swordhuihui>
    Tue Jun 17 18:52:55 2008 Info: MID 10698519 Message-ID '<10849536>'
    Tue Jun 17 18:52:55 2008 Info: MID 10698519 Subject '=?GB2312?B?1Pa807z7zsU=?='
    Tue Jun 17 18:52:55 2008 Info: MID 10698519 ready 1452582 bytes from <mia_kma3998>
    Tue Jun 17 18:52:56 2008 Info: MID 10698519 matched all recipients for per-recipient policy DEFAULT in the inbound table
    Tue Jun 17 18:52:56 2008 Info: MID 10698519 was too big (1452582/102400) for scanning by CASE
    Tue Jun 17 18:52:56 2008 Info: Start MID 10698528 ICID 0
    Tue Jun 17 18:52:56 2008 Info: MID 10698528 was generated based on MID 10698519 by duplicate-quarantine filter 'good'
    Tue Jun 17 18:52:56 2008 Info: MID 10698528 ICID 0 From: <mia_kma3998>
    Tue Jun 17 18:52:56 2008 Info: MID 10698528 ICID 0 RID 0 To: <swordhuihui>
    Tue Jun 17 18:52:56 2008 Info: MID 10698528 ready 1452584 bytes from <mia_kma3998>
    Tue Jun 17 18:52:56 2008 Info: MID 10698528 quarantined to "good" (duplicated by content filter:good)
    Tue Jun 17 18:52:56 2008 Info: MID 10698519 quarantined to "Policy" (message filter:flg1)
    Tue Jun 17 18:52:59 2008 Info: ICID 26146919 close
    The log shows the quarantine action of message filter take effect after the content filter action. I'm quite confused.
    Any suggestion?

    The original message was marked to go to the "Policy" system quarantine via the message filter. However, that message continues through the email pipeline. If no other action affects that message(i.e. dropped by Sophos anti-virus), then the system will move the message to the "Policy" quarantine as originally marked.
    However, in your case, the message was marked to be sent to the "Policy" system quarantine, and then it matched your content filter and did two things:
    1. spawned a copy of the original message and sent this new one to the "good" system quarantine. (see MID 10698528)
    2. the original copy was left alone and this one was sent to the "Policy" quarantine. If you had a drop() action, then it would have gotten dropped and you would have been left with the single copy from #1 (see MID 10698519)
    What was the intended behavior you were trying to achieve?
    Here are some references that may help:
    1. Where can I see a diagram of the IronPort email pipeline?
    You can find a diagram of the queue sequence if you click on the Help
    link in the top right of the web interface - it takes a while for it to
    load. Find the section "Understanding the Email Pipeline" and then
    under that "Overview: Email Pipeline".

  • How to I access my photos from icloud on my pc. I can access my calendar, notepad and reminders but not my photos

    How di I access my photos from ICLOUD on my PC? I can access my calendar, notepad and such but no photos

    Hi jbaker5d,
    If you are having an issue with photos not showing up in My Photo Stream on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    Get help using My Photo Stream
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I love the graduated filter and circular filter tools.

    So useful. Both would be MUCH more useful if I could hold Alt and I would get a brush tool with to brush away effect in areas where I don't want it applied! Does that exist or am I dreaming?

    WhoDo wrote:
    Thanks, BKKDon, but I'm looking for this option to be available in Lightroom. The functionality usually trickles down from Photoshop CC, so I'm hoping it's on the way if it's not already there.
    So, you need to realign your expectations a bit...now that Photoshop is a subscription only product, ACR can add new features when they are ready and not wait till the next major upgrade. Lightroom is still a perceptual license and as such can not get the new features and functionality that ACR gets until the next major upgrade. So, if it's in ACR now, it won't be in LR till the next major upgrade (such as LR 6).
    However, there is a workaround....if you use ACR 8.5/6 to alter the radial or gradient filters by using the filter brush, if you save the metadata to the file after an ACR edit and then read the metadata in LR from the file, the filter brushes will render correctly. You won't be able to edit the filter brushes in LR 5.x but it will render them.

  • Elements 11 crashes when try to apply the pen and ink filter.

    Worked previously, then get crash. Re-installed elements, still crashes. All other filters work as expected.
    Appreciate any help with this?
    On a Mac running OSX 10.9.5

    Try this solution:
    1) Close photoshop Elements 11 completely.
    2) Launch Windows Explorer and then go to:
    <C:\USERNAME\JTANNA\AppData\Roaming\Adobe\Photoshop Elements\11.0\Editor>
    Replace USERNAME with your Windows profile name.
    3) Rename the file called: Adobe Photoshop Elements 11 Prefs.psp   TO Adobe Photoshop Elements 11 Prefs.old
    4) Close Windows explorer
    5) Restart PSE 11
    Hope this solves the problem.

  • How can I apply row numbers and column litteral to identify the cells?, How can I apply row numbers and column litteral to identify the cells?

    I news identici row and column in numbers over and left as in Excel. How can I do?

    Hi Roanto,
    Welcome to Apple Support Communities.
    We're all feeling out way around in this newly designed environment, but I think I've discovered that the iWork applications for iPad are still in a community separate from those for the Mac versions of the iWork appplications.
    Seeing as you question is about Numbers for iPad, you might find it better served in the https://discussions.apple.com/community/ipad/iwork_for_ipad>Numbers for iPad Community area. The link will take you to the front page of that community.
    Regards,
    Barry
    PS: You might also consider rewriting your question. I'm having some difficulty deternmining exactly what you want to accomplish.
    B

  • How can i print deep black and deep white without any other pale grey color being printed

    i want to print deep back and deep white
    how can i edit the whole pdf to that kind
    like this
    if i print the grey normal way it looks like this

    Hey sinfulslave,
    Could you please let me know what version of Acrobat are you using.
    For Acrobat XI, you might choose 'Advanced' under Printer Properties and enable 'Print all Text as Black' option.
    Refer the below mentioned KB doc link as well if that might help:
    Print in black and white | Acrobat, Reader
    Let me know.
    Regards,
    Anubha

  • Can anyone explain the split and overlapping date ranges in PHOTO moments.  I would have expected each date to have its own slot.  What logic is used for deciding which photos to include and where to split them?

    iPad Air iOS 8.1 Stock Photo App.  14000 Photos. Overlapping date ranges in Moments.  What is the criteria used for deciding after import where photos are included in Moments.  I was expecting each day to have its own exclusive slot for example, not 26 - 27 January 2007 with 8 photos then 27 January 2007 1 photo.  Why is there not two seperate slots, one for the 26th and one for 27th??   This makes locating photos by day more arkward than it need be and seems to follow no logic.  This occurs over 150 times and is very confusing.  Is this an issue or expected behaviour?

    iPad Air iOS 8.1 Stock Photo App.  14000 Photos. Overlapping date ranges in Moments.  What is the criteria used for deciding after import where photos are included in Moments.  I was expecting each day to have its own exclusive slot for example, not 26 - 27 January 2007 with 8 photos then 27 January 2007 1 photo.  Why is there not two seperate slots, one for the 26th and one for 27th??   This makes locating photos by day more arkward than it need be and seems to follow no logic.  This occurs over 150 times and is very confusing.  Is this an issue or expected behaviour?

  • How can I enable the Places and Faces Button in the Photos App?

    There is no button in my Photos App which shows Faces or Places. What do I have to do? Do I need to install iPhoto first, and then enable Faces and Places there, in order to have it on the Photos App? I am using an iPad3 WIFI only.
    Greets Fedemax

    You sync those folders from iPhoto on a Mac computer. Those are "built in" folders in the iPhotos app on a Mac. I don't use iPhoto for iOS, so I cannot comment on whether they exist in the app itself.
    Those folders will sync automatically from iPhoto if they have been selected to sync in iTunes. You don't set them up on the iPad.

  • Help! I can't get a moving image in my program window. just a grey box

    If i double click on my timeline footage i will get the still image but I cant get the moving image. Im also on a tight deadline!

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    -If Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Maybe you are looking for

  • How to assign select only privilage to a user application wise..?

    1-i have a function checking for a user_id and password it works fine. 2-i have a procedure checking for the user privilage Both 1 and 2 stored in a package library,both called from 'ok' button on the main form as follows: DECLARE      V_USER_ID user

  • SynchronizedMap in Oracle driver?

    I am profiling our application with JProfiler and the monitor where we spend most the time block is one to have access to a SynchronizedMap. The problem is that this SynchronizedMap is in the Oracle JDBC driver, like you can see in this stack trace:

  • Can't drag item

    Hi, There is a screenshot of my project above. I'm trying to drag the rectangle, but i cant. Can somebody you tell me where i am mistaking? Btw, i'm trying to drag with this plugin: touchpunch.furf.com

  • Manual calculation of 'Buffer Cache hit ratio'

    Using: Oracle 10.2.0.1.0, Redhat 4, 64bit. Manual calculation of 'Buffer Cache hit ratio' is very off from what it shown in statspack. Statspack shows: Instance Efficiency Percentages ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~             Buffer Nowait %:  100.

  • Server Monitor says "CANNOT_LOAD_BUNDLE_ERR"

    Hi all, Any server admin around? On my freshly installed 10.7.3 Server I can't get the "Server Monitor" runing properly. It doesn't show any information (except of IP and log) while Server Admin and Workgroupmanager are working fine. Log says "Failed