Can't apply new Firmware 1.4 on eligible MBP!

"I have a MacBook Pro with Boot Firmware MBP31.0070.B02. The new EFI Firmware 1.4 update says my computer doesn't need it."

The firmware update is for people who own macbook pro's with model MBP2,1 and MBP2,2 , which is the 2nd generation of mbps..... the one u're having is the same as the one i'm having, which is 3rd gen mbp, MBP3,X...

Similar Messages

  • Can't download new firmware

    I can't download the new firmware 1.0.3 to my iPod nano 3, when i try to download it says "Itunes could not contact the iPod software update server because you are not connected to the Internet"
    But I am connected to internet! I can purchase music and stuff in Itunes store.
    How do i fix this?
    I solved the problem...
    Message was edited by: Snowdonia

    This usually means you have hacked your iPhone - with "jailbreak" the cutsie term for hacking an iPhone.

  • NOKIA 5610 CAN'T UPDATE NEW FIRMWARE 6.60&7.12!!!!...

    juz now i 've found tat there r 2 new firmwares available for download .BUT it is only for other country!!my software updater oso shown tat my firmware now(4.18)is the newest..y we can't update our phone's firmware while ppl from other country can????

    These questions come up time and time again. Two main factors affect this:
    (1) Updates are phased in around the world because there are numerous regional variants, it is not just a single softwarfe for any particular model worldwide. Some regional variations may lag behind others.
    (2) If the phone has operator-version software instead of standard Nokia software, Nokia must await the approval of the network before it may release updates.

  • Can Nokia E51 new firmware 200.34.36 run Opera Mob...

    Hi,
    Can someone who have upgraded the firmware for E51 try to run Opera Mobile on it?
    Thanks
    Chote

    Hi
    I could not get Opera Mobile to work but Opera Mini run fine.
    cheers

  • How can I apply new attributes to a table-Tag in an JEditorPane?

    I'm using a JEditorPane as a base for a small HTML-Editor. The manipulating of the attributes of an image-tag such as href works fine. But now I want to add the width-attribute to an table-tag.
    The result: Nothing in the table-tag, but other strange things (width is set to any TD oder in every cell a new table is added.
    How can I do this? Any suggestions??
    Thanks.

    Did you ever solve this problem?
    I can manipulte the <p> tags and character styles, but the manipulation of <td>, <div> and other standard tags I cannot figure out.
    Please let us know, [email protected]
    By the way:
    If you have only a width tag in your images, does it resize proportionaly, as in a normal browser or is the height taken from the original picture, as it happens with me?
    This is quite nasty, since I do not know the original picture sizes.

  • HT202789 How can I apply new keywords in iMovie (2013)?

    I can't find the keyword button and can't activate it in advanced tools anymore, so how do I apply keywords to clips in iMovie (2013)?

    Greetings anadk,
    Thanks for contributing to the Apple Support Communities. 
    It looks like you've found the article regarding accessing keywords from previous versions of iMovie in iMovie (2013). While you can use keywords from projects created in previous version of iMovie, this is not a feature of the current version. 
    You can find some good tips for organizing clips in your iMovie (2013) projects at the Help page:
    Library overview - iMovie Help
    All the best,
    Jeremy 

  • Can't post new firmware on Time Capsule

    Through the airport utility, I followed the prompts to do the firmware updates to 7.3.2 However, it won't install the update on my time capsule, only on the network extenders (older airport extreme and one airport express). It gives me a message that it needs to be in range or connected via ethernet, both of which it is.
    Do I need to do a reset, or hard reset? I am always scared to loose some setup info when I start fresh!
    Also, ever since I added the time capsule as my base station, I can only intermittently connect wirelessly to the internet from my iphone or laptop, although they both show strong wifi connections to the network, and ethernet connects to the internet through the same timecapusle. ??
    Thanks if anyone can help.

    Have you opened this one over a wireless connection in the past?
    A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries. 

  • When we can upgrade the new firmware version(v5.07...

    PLEASE REPLAY SOON

    10-May-200706:04 AM
    adilss wrote:
    You can upgrade immediately. I upgraded mine by following instructions from the Nokia website
    That's not necessarily true: it depends on whether your network's version is available.
    Some networks are not so good at supporting firmware releases, for example I have an N80 on Vodafone and the latest firmware version available for my phone is two releases behind what's available for other N80 users.Message Edited by patc on 10-May-200711:15 AM

  • Why I can not update my E72 new firmware?

    Hi Friends,
    I have E72 with this specification:
    E72-2, RM 529, version 022.007
    I am trying to install new firmware version 31.023. Although I found out this version is released but my Nokia software updater just say my current firmware (22.007) is up to date! Is it possible? How can I install new firmware?
    Thank you

    Read my posts again. Your product has a product code like you would have known if you've read my posts. Nokia phones get productcodes to tell them apart from if it's branded, where it's branded, what country it is made for (language version), region and so on (simply explained).
    Like your E72 has a productcode, mine E72 I had a while ago had a different product code. Like in Norway there are two big service providers: Telenor and Netcom. an E72 from Telenor would most likely have a different product code from Netcom. Cause those providers will have to decide if they are going to let the users update or not. If Netcom approves the fw from Nokia, but Telenor don't then it would be not fair if telenor customers could update due to the same product code.
    So when you connect your E72 to nokia software updater, it will read your product code. And if you are allowed to update, you will get it, but If example Netcom has not approved it yet, NSU will tell you that there isn't a new update and that your device is up to date.
    The E72 I had is ment for the scandinavian market and has a product code which reflect that - it will give me an fw update containing amongst a few other languages - MY language.
    If All E72's had the same productcode but the code was function like it was today - the updates would contain all languages of the world...
    If your phone is not branded or something it might even be that Nokia is a bit late - that happens too
    I've tried to explain this to be easy, using some examples...
    So if you don't want to wait, go to a Nokia care point and ask if they could update it.

  • I want a new firmware for the N93i!

    Please don't forget this mobile the N93i! I love this phone! I hope you can update a new firmware, Please. I want to have the same applications than the N95 for the foto camera and the video recorder, when somewhere it's a little dark the quality is bad sorry for my poor english. Thank you.
    Solved!
    Go to Solution.

    You don´t seem to know that the people that post on this board don´t write FW for phones. We just provide user/user or costumer/costumer help.
    If you want to adress Nokia, try using the Contact button on the website itself.
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • How do I install new firmware for WRT160N?

    Okay, I'm having the same DNS problems that everyone else seems to be having with this router. Wireless devices work fine, but my desk PC consistently fails to connect. If one of the wireless devices is actively sending/receiving packets, my desk machine works fine. I have a WRT160N v2 and the firmware version is 2.0.02, build 11 (the notorious one). My PC is a Vista 64 bit OS.
    I saw they have a new version of the firmware (2.0.03), which I have downloaded (to hdd). Can anyone explain (in step by step, simple terms) how this ignoramus can install the new firmware (assuming of course, that this new version will solve my connection problems). TIA for any information/instructions you all can provide...

    Upgrading the firmware resolves many problem, so you can try it...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" 
    Now reset your router.....Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Zen Micro Photo 8GB!!! Can't install new Firmwa

    Hello Everybody,?I'm sorry for my bad English but i am from GErmany
    !!! Also,?I have a Creative Zen Micro Photo 8 GB, and two day's ago i will load my Zen micro at the PC. Wenn it was finish with load all my songs are deleted! And then i maked a clean up! But all songs and Pictures?are deleted! Then i make new songs on my Zen Micro Photo! But?some of the songs are very bad and they somethimes hang and then the play?hangs, too. Then i have formated the Player and now the PC can't find the Player and i will make a new Firmware on the Zen Micro Photo but the Pc can't find the Player! What can i make, i think? the Firmware on the Player?is?deleted, because?the PC can't find the Player. That means that i can't make some Songs or Photos on my Player and i can't can make the new Firmware on?the Player! So i hope some body can help me!?Thanks. Maybe somebody?can answer me in German?but in English it'sis ok, too. GOOD BYE

    Sorry, I don't speak German, but here is a web translation of the instructions. Best of luck!
    Dateiname: ZENMicroPhoto_PCFW_L6__3_0.exe
    Dieses Download enth?lt eine verbesserte Version der Mikroprogrammaufstellung, die auf deinem kreati'ven ZEN? MicroPhoto gefunden werden. Es erm?glicht dir, Audible? Inhalt auf deinem Spieler zu spielen. F?r mehr Details den Rest dieser Netzfreigabeanmerkung lesen.
    Verbesserungen:
    * St?tzt das Playback der h?rbaren Art 4 Schienen.
    Wichtig: um h?rbaren Inhalt zu bringen, mu?t du AudibleManager? Version 5 oder sp?teres haben angebracht. AudibleManager erlaubt dir, h?rbaren Audioinhalt zu downloaden, zu brennen, zu organisieren, zu bringen und zu h?ren. Download AudibleManager von www.audible.com/software.
    * Addiert die Volumen-Beschr?nkung Eigenschaft, die dir erlaubt, Playbackvolumen deines Spielers einzuschr?nken maximales.
    * Addieren FM Aufnahme (f?r Spieler mit gegenw?rtiger Mikroprogrammaufstellungversion .30.04)
    * Gibt bessere Unterst?tzung f?r Sprachen anders als Englisch
    * Verbessert Reaktionsverm?gen des Spielers onscreen Schnittstelle.
    * Verbessert ?bergangslatenzzeiten f?r DRM-gesch?tzte Akten
    Erm?glichen der Anzeige von Abbildung thumbnails von der Ikone deines Spielers im Windows Forscher (f?r Computer mit Windows Media? Spieler nur)
    Anforderungen:
    * Microsoft? Windows? XP zentrieren professionelle Mittel der Ausgabe-x64, Windows XP (Service-Satz oder sp?teres) oder Windows XP Ausgabe 2004
    * Windows Media? Spieler 0 oder sp?teres
    * AudibleManager Version 5.00 oder sp?teres f?r h?rbares zufriedenes Audioplayback
    * USB . Tor (USB 2.0 empfohlen f?r schnellere ?bertragungen)
    * Kreati'ves ZEN MicroPhoto
    Anmerkungen:
    * Diese Mikroprogrammaufstellung anbringen
    1. Die ZENMicroPhoto_PCFW_L6__3_0.exe Akte in deine lokale Festplatte downloaden.
    2. Deinen Spieler an deinen Computer anschlie?en.
    3. Doppelt-Klicken die Mikroprogrammaufstellungakte und befolgt die Anweisungen im Schirm.

  • Can't instal SMC firmware update on my MBP 1.83

    Hi. I tried installing the new firmware 3 times but my MBP restarts and shows a blinking file folder with a question mark. If i then restart i start right up into OSX. I also have a partition for XP and have no problems booting using the option key. Any ideas? Thanks all!!

    Hi,
    First go to System Preferences -> Startup Disk -> select your Macintosh Disk, and click the lock to prevent changes.
    That should do it.

  • How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

    how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it.  i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this.  have i inadvertently clicked on something to turn this facility off?  i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

    Which version of photoshop are you using?
    After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
    For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

  • How can I apply existing WCS "WLAN Config" templates to a new WLC?

    We've been running a pair of WLC 4402s managed by WCS, thus we are still on the older 7.0.235.0 (WCS) / 7.0.235.3 (WLC) release. I'm trying to add an additional WLC 4402-50 as a hot spare. I first ran the manual setup steps to give it an IP in our range, and used the WLCs web page to set our SNMP communities and such to the values used by our existing WLCs, then I added the new WLC in WCS.
    At this point I could apply most of the "Controller Templates" from our existing configuration to the new unit. However, I can not get it to take our existing interfaces nor our WLAN Configurations. How do I avoid needing to recreate these from scratch on the new WLC?
    We only have four dynamic interfaces, and each WLC needs its own IP address for each interface, so I did manually add these via the WLCs web page. However, now when I go to the WCS' "Configure > Contoller Templagte Launch Pad" page, then select "WLANs > WLAN Configuration", I see my usual list of WLANs, but can't figure how to push them to the new WLC.
    For all of the other templates on the launch pad, I can select a template, click the "Apply to Controllers..." button, and I get a list that has my existing two and also the new controller. I can select the new controller, and apply the template, and it succeeds.
    Yet if I select a specific WLAN config, and press "Apply to Controllers...", the list that appears has only my existing two WLCs, not the the new one.
    In small green type at the top it says, "Controllers configured with Interface/Interface Group - 'w-restricted'  and selected RADIUS server(s), LDAP servers, ACL Name with rules and  Ingress interface are shown."
    I have already manually added the interface "w-restricted" to the new controller, and have added the RADIUS servers via the template used by our other two WLCs. Not sure what to do about "LDAP servers, ACL Name with rules and  Ingress interface", as we don't have any ACL rules, nor use LDAP directly from the WLCs (as all user ID stuff is via RADIUS).
    Any hints on what manual setup I should add to get the new WLC in the list for these WLAN Configs?
    Thanks,
    Steve

    To be honest, if your only adding another WLC, your better off creating the interface and WLAN's manually. I don't like pushing out templates to create new WLAN's. I would use it to adjust an existing WLAN, but that would be it. To me it's safer. Also your new WLC is on the same code? If you really want to figure it out, I would manually add the interfaces first then refresh the co fog from the new WLC and then push out the WLAN SSID and see if it takes. If not, don't waste your time anymore and create it manually.
    Sent from Cisco Technical Support iPhone App

Maybe you are looking for