Can't authenticate to wireless modem via Airport

1.2 GHz PowerPC G4 Cube, OS X 10.4.11, unable to connect via Airport (firmware 9.52)
The modem is set up for WPA/WPA2 PSK (ActionTec 1000), encryption type is AES. Compatibility 802.11b, 802.1.g, 802.11n
When trying to connect via Airport, I am only offered the WPA Personal option. I get an error message: "There Was An Error Joining The Airport Network".
Is it an OS X issue? Airport card issue? Configuration issue? Is this beast too old? I'd appreciate help from folks smarter than me, which is everybody.
Gary

BDAqua wrote:
Hi there,
The original Airport card cannot do WPA2. Some Modems/Routers have a separate setting for WPA, & WPA2, the WPA/WPA2 setting is supposed to be automatic, yet often it defaults to WPA2, or adopts which ever encryption connects first.
See if you can set it to WPA only. Also see if it's set to allow 802.11b, try TKIP instead of AES for WPA also.
Hi BDAqua. I tried all these suggestions and I get the same result - I cannot authenticate.

Similar Messages

HT3546 can you use your wireless modem and a airport to extend wifi or do you need two airports?

please help

If you require a wireless connection, then you would need a second AirPort to accomplish this. The first AirPort would connect to the existing wireless modem via Ethernet. It would be configured as a bridge and also configured to be extended by the second AirPort. You can use any combination of 802.11n AirPort models for either of the AirPort to configure an extended network. Finally, you will want to disable the wireless radio in your wireless modem to prevent Wi-Fi interference between the two wireless networks.

Can I configure a gsm modem via bluetooth API

Hi all
Can I configure a gsm modem via bluetooth API ?
thanks in advance
Vishin Das V D

Hi deepspace
Could you please go through this thread ? http://forum.java.sun.com/thread.jspa?threadID=5211663&messageID=9860406#9860406
it will be a great help for me
Thanks
Vishin Das V D

Can't get windows 7 netbook onto wireless internet via airport extreme.

I've spent 3 days trying to get my new Acer netbook with windows 7 home premium in it on the internet wirelessly through my Airport Extreme. It shows the internet is there but will not connect. It keeps asking me for a security key. I have tried my system password and the airport password, neither of them work. I have a feeling I'm just missing something in one of the settings but I am a die hard Apple/Mac user and this little windows machine is really killing me! The airport is working flawlessly for my Imac desktop and my Ibook so I know it isn't the airport. Anyone have any suggestions (other than getting rid of the Netbook?)

I'm kind of having the same problem. I can finally connect and get on the internet wirelessly but I can not setup my Airport Extreme. I just moved recently and I didn't have any issues at my old place and now I can use the internet and I get this blinking amber light and it's kind of annoying. Every time I click Manually Setup or Continue in the Airport Utilities my computer will try to detect any Apple devices, even though it right there on the left side it can not connect to it. At the same time I click either button my wireless disconnects for a second and reconnect.
I can't setup my Airport Extreme using this garbage OS they call Windows.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Wireless Modem and Airport Express USB Printer

I am already connected to the internet via a wireless modem provided by my ISP. The connection uses Airport. I just purchased an Airport Express to connect my computer to a printer through the USB port. However, I can't get the airport utility to connect to the Airport Express solely for the purpose of connecting to the printer. I have tried to make the new aiport express both a new network and part of an existing wireless network with no sucess. I sitll have a flashing yellow light on my Airport Express. I have not connected the wireless modem to the Airport Express. Do I have to connect the airport express to the modem? Help!
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)

Hi Andrew Otis:
Welcome to Apple Discussions!
You'll need to configure your AE via the Airport Admin Utility to Join an Existing Wireless Network, then select the name of your network in the drop down box or enter it EXACTLY as the SSID is broadcasting your network Name. You may also have to configure wireless security if you wireless modem has that enabled.
I hope this helps!

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Can anyone recommend an ethernet modem for AirPort Express?

Well I think I want an ethernet modem as I don't know the differences between those and routers or whatever. I just want to access my broadband ADSL Demon account wirelessly with my AirPort Express. I'm currently 'using' an XBridgeDSL bought from the Apple store, but it's proving unreliable (I constantly have to reset it by turning the power on and off). The only other one Apple sell which seems suitable is the D-Link but that apparently only works if one computer is using the connection. Any ideas?

The only true Ethernet Modem that passes the IP address to the Express is the X-Modem but unfortunately it is as yet still not available due to manufacturing delays. However you can use an ADSL Router by switching off the distribute IP addresses in the Airport Express. The only down side to that is that you may have to configure port forwarding rules in the router if you want to do iChat AV conferencing etc.

Can't share internet with iPhone4 via Airport with MacBook Pro on Ethernet

I'm in Iraq being abused by a criminal ISP offering 256K (yes, kilobytes per second!) connectivity via a cat IV ethernet cable to my MacBook Pro (OS X 10.5.9). I have a first-gen iPhone4 (16G, version 4.2.1), it will not connect to the internet via airport to my MacBook. I'm getting a good wi-fi symbol on my iPhone, the Airport is correctly finding my MacBook's network, and it properly demands/accepts my WEP password. But I cannot get mail, go on line or use any apps.
Under the DHCP tab on my MacBook's network on the iPhone's Settings/Wi-Fi page...I have a good IP Address and Subnet Mask. Previously I've also had numbers show up on the Router and DNS lines as well...but they are now blank. I have never had numbers on the Search Domains or Client ID lines.
Can anyone tell me what's missing to get my internet sharing working?
Thanks!

OK, on your iPhone you have four fields that need to completed for any type of WiFi networking to operate. The fields are (in order) the IP address of your device, the subnet mask for your network, the "router" IP address, and finally the DNS addresses.
I'm not sure what these numbers look like on an ad hoc network, but a typical router based network would look like:
Device IP: 192.168.1.x with x being between 2 and 255
Subnet mask: 255.255.255.0
"Router IP": 192.168.1.1
DNS: usually a pair of IP address separated by a comma. Sometimes this is supplied by the network you are conneccted to, other times you specify an address (like OpenDNS or Google's DNS service)
If your phone has an IP address of 169.x.x.x, it means that your ad hoc network is not supplying it with an IP address. Make sure that the DHCP box is checked (the ad hoc network will assign an IP address) or manually assign IP address.
To be honest with you, I'd go out and buy a basic N router (about $40 US), plug it in to your ethernet connection, and connect your devices to that. You get far better security as the router has a firewall and you can use WPA2-AES encryption on the wireless side - and it is easier to set up.

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

HP Laserjet 1010 & Wireless printing via Airport USB - Not working in SL

Hi There,
After just upgrading to Snow Leopard on my MacBook I tried printing wirelessly to my HP Printer, but no luck!
Printer: HP Laserjet 1010
Connected via: Airport with USB cable
Snow Leopard recognises the printer and is fine to print when the printer is connected directly to the MacBook via USB cable, but:
When I set up wireless printing, it finds the printer (via Bonjour) but simply will not print. The print monitor gets to 24% or so of the file processed and then just stops & fails.
Everything was fine under 10.5 Leopard. It seems it should work, but no printing occurs! Any ideas?
Many thanks,
Paul

I had a similar-sounding problem with my HP1012.
The fix:
a. power-cycled the Airport Extreme.
b. Updated firmware.
c. Select Print in an application.
For an extended discussion of what I did see here - some of this may help:
http://discussions.apple.com/thread.jspa?threadID=2142906&tstart=60
Actually, at this point I have two printers connected: Airport Extreme ->USB powered hub ->2 printers. One is the HP1012, the other is an HP 4300 series inkjet. Took sometime to get it right, the first hub I tried apparently was not powered enough. In that vein, one earlier thread (a response to one of my posts) pointed out the possibility that the AE -> printer USB connection might not be adequately powered, and to try using an intermediate hub. Assuming your AE is performing properly in all other respects, don't rule out a cable or other printer connection issue even if the setup was working properly before.
stan

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

Can't find certain servers connecting via Airport Express

For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

Gerard Van Schip wrote:
I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
You don't describe what happens when you try to print.
Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

Wireless Speakers via Airport Express

I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
Has anyone had similar problems and is there an answer...??????

Check out this article:
http://www.macfixit.com/article.php?story=20070322005336248
I don't know if it's good or anything, but it looks like the info you want.

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

Can't authenticate to wireless modem via Airport

Similar Messages

Maybe you are looking for