Can't Autodetect AirPort Express in Windows

I've just recently started being unable to autodetect my AirPort express from Windows machines. I use it primarily as an AirPlay speaker, but applications such as iTunes (for Windows), Airfoil, and the AirPort Utility can't see it. This seems to be limited to Windows machines; iTunes on the Mac can see and play to it just fine, as can an iPhone. It's just my two Windows 8 machines that can't see it -- one of them used to be able to, the other I just tried installing the AirPort Utility on today. The AirPort Utility can be used to manually configure the AirPort Express when given its IP, just can't find it automatically. Tried disabling the Windows Firewall; tried repairing and uninstalling/reinstalling Bonjour (current version is 3.0.0.10).
Not really sure where else to go from here -- between everything that is/isn't working it seems like the only possible cause is some issue with Bonjour for Windows. This problem cropped up within the past month or so -- I don't use AirPlay from my Windows box all that often -- which looks like it would roughly correspond with Bonjour v3.0.0.10 coming out.
Any ideas? I want to try going back to Bonjour v3.0.0.2 but I've been striking out so far finding a download for it.

Hi Bob, thanks for stick with me on this. I did get it and I'll share some points here for those that may be having the same issue. My opinions: Extreme find Express is a bit finicky. Reason even though I had it plugged directly into the Extreme via ethernet cable, sometimes it saw it sometimes not. The thing I found the best to do is unplug the express, unplug the ether cable, plug it all back in and press the hard reset. I had to do it a couple of times until it worked and I only new to keep trying from some other posts outside of this support forum. One of the most iportant things here is what Bob says, you must know your Extreme security level and the password. Also, its a bit peculiar because once your Express shows up in Airport Utility and you are following the 'wizard' it provides a drop-down to select a wireless network to join. At this point I expected to see the wireless network but its not there. I had to type it in. Lastly is not clear why you would choose join a network vs extend a newtwork - could use some docs on that. Hope this helps others.

Similar Messages

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

Macbook can't recognize Airport Express!

Hi guys,
I have a Macbook Pro Retina 15" Early 2013 running Mavericks 10.9.1. My router is the Apple Airport Express A1088 and what is happening is: I did the setup of the Airport Express last year and everything was working fine. I had to download the Airport Utility 5.6 and then I configured the Airport Express. Alright. But today, my wifi connection was not showing in my Macbook Pro, but it was working fine in my iPhone 5. I tried to turn the Airport Express off, and the same for my Macbook Airport, but it doesn't work. So I decided to do a hard reset and also a reset to factory settings. What is happening is my Macbook Pro showed only one time after doing the reset and I did all the steps of the setup using the Airport Utility 5.6. But when the airport express restarted, it was working only with my iPhone 5, not with my Macbook. So I tried to reset again to factory settings and now I can't do the setup because the Airport Express doesn't show up in my Macbook as a new base station or anything else. With my iPhone 5 I can see the Airport Express as a new base station, however I am not able to setup it because it is a old version (A1088).
I don't know why my Macbook Pro is not showing up the Airport Express. I have already tried to make it work with Windows (via virtual machine) and using Airport Utility 5.6. I also know that THIS IS NOT A HARDWARE PROBLEM! Any other network I am able to join with my Macbook.
I also looked in this forum about other users that had the same problem, but almost all of them started working after a hard reset or reset to factory settings, which is not working for me.
I just wish my Macbook to recognize the Airport Express, until yesterday everything was working fine. And today it is only working with my iPhone, but I am not able to set up it with the iPhone.
Help!
Thanks!

Hey Luis!
I am sorry - i only searched for Apple Airportutility and Mavericks to post the Link :-)
Did you already tried
- to delete your Wifi from the list of known Wifi's from your MacBook/System Prefs/Network/AirPort/Option/
- or maybe delete and reinstall the AirPort Service from your MacBook/System Prefs/Network
Cheers
Robo

How can I join Airport Express and 2Wire 3600HGV to extend wifi?

I to join an Airport Express to the wifi network from my AT&T 2Wire 3600HGV router to extend the wifi signal. I know it is not SOP to link an AX to a non-Apple device like this. I found instructions ( http://fsdeviations.blogspot.com/2012/09/howto-2wire-3600hgv-airport-extreme.htm l ) for joining an Airport Extreme to the 3600HGV. Has anyone used this or a similar approach with the Express to join and extend wifi from the 3600HGV?

Connect an Ethernet cable from on of the LAN <--> ports on the back of the 2-Wire modem/router to the WAN "O" port on the AirPort Express.
Power up the AirPort Express for a few minutes. The indicator light on the front of the device will be slowly blinking amber at this time.
On your Mac......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on AirPort Express
The setup utility will open up and take a minute to analyze the network, then suggest that the AirPort Express will create a new network....which is the correct setting. The window will look similar to this illustration:
For Network Name......type in the exact name of the wireless network that the 2-Wire is providing......IF.....you want to "extend" the 2-Wire network and make one "big" network. If you want to have the AirPort Express provide a different network, type in the name of the network that you want the AiPort Express to provide.
For Base Station Name....type in a device name that you want to call the AirPort Express
Password......If you want to extend the 2-Wire network, then type in the exact same password that the 2-Wire network is using. If you want the AirPort Express to provide a different network, type in a password that you want to use with the network that the AirPort Express will provide
Verify......verify the Password
Click Next, and the utility will set up everything for you automatically.
When you see the message of Setup Complete, click Done. That's it. There should be a green light on the front of the AirPort Express at this point. You can configure other AirPort Express devices in the same manner.

Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

GEESAR wrote:
hi there
is there anyway i can use the unlimited data i have from my mobile network provider (o2) on this i pod touch 4 generation the latest model NO.
and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider NO
if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
geeeeesar also how does this ipod touch4 pick up the wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of. These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants. Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for.
thanks can i pod touch 4 generation download movies too please help thank u very much.... Yes. If your iPod has a WiFi connection and you have an account with a service like NetFlix....

How can i install airport express A 1264 on os x 10.9.2

How can i install Airport Express A 1264 on os x 10.9.2

Hello chawich
All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
AirPort Utility software and firmware downloads
https://support.apple.com/kb/HT1998
Regards,
-Norm G.

Airport Utility can't find Airport Express after setting up as repeater station

I wanted to extend my 2Wire-based wireless network into a specific room that never seems to be able to pick up the signal, and found the following instructions on how to do so on Apple's website:
(note: these instructions were submitted by another user in response to a question as to whether or not an Airport Express could be used as a repeater station for non-Airport Extreme-based wireless networks - linked here http://store.apple.com/us/question/answers/product/MB321LL/A?pqid=QY4CAJJC7KFTTD KYH72DKPXF4CAUA9D4J).
Yes, you can do this two ways: If you can connect your airport express to your router via ethernet, then you will perform the following steps in the airport utility:
1. Select your airport express.
2. Select manual set up.
3. Under Wireless, select Participate in a WDS network
4. Enter your network name, radio mode, channel, and security
5. Under WDS, select WDS main
6. Check wireless clients
7. Add the MAC address of the router
8. Click update
That's it
Now, if you connect your airport express to your router wirelessly, all the steps are the same except for step 5. In this step, select WDS remote instead. Everything else is the same.
I followed those instructions exactly with my Airport Express and, after restarting, the amber light is flashing on and off continuously and the Airport Utility can't find the Airport Extreme base station. What the heck went wrong here?

Update:
I restarted the laptop I used to set up the AX as well as pushing the "reset" button on the AX (first time - pressed it for 1 second, Second Time - pressed and held for 15 seconds then let go). The Utility still isn't recognizing the base station.
I also upgraded the Utility's software to 5.5.3 right before I went through these steps, and now it's not recognizing the base station. ARGH.
Update #2: I plugged the AX into my laptop with an ethernet cable and the utility STILL can't detect it. This is ridiculous.
Update #3: Not 30 seconds after update #2, it FOUND the **** AX >.< I'm updating the firmware, but I still can't get it to work as a repeater station if I have to plug it into my laptop all the time JUST to get the Utility to recognize that yes, Virginia, there IS an Airport Extreme.
Message was edited by: bleedingrose19

Can u run Airport Express and a wireless modem together?

Can u run Airport Express and a wireless modem together at the same time?
I'm using AE purely for music distribution and have just bought a wireless modem for the internet (not a AE). However I can now only select either the AE network, OR the wireless internet network (it's BT HomeHub). Hence I can either play music or use the internet, but not together!
Any ideas anyone..??
Thanx
David

You should configure your AirPort Express (AX) to join the wireless network provided by the modem. The instructions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Why can't my Airport express be found by the airport utility?

Why can't my airport express be seen by the airport utility?

I have the same problem.
I have a Mac Pro OSx10.7.5, a Netgear router, A 1st gen Airport Express Model A1264 set up in Bridge Mode w/ LAN cable as Network 2 for Airplay, the iPad palys music and connects to the internet great through it. I want to extend Network 2 to another set of speakers in another room so I bought another AE A1264. "Like new"
So far I cannot get the computer to see the new AE at all. I have tried it wired to the router, wired to the Mac, wireless near the 1st AE, I've reset it and restarted multiple times. It just isn't showing up at all. ZIP. I get a slow blinking yellow light.
The Airport Utility "Configure Another"comes up with a Mac address I haven't seen before. I don't know if it's the new AE or not. In any case none of the passwords including " " for a password work. It spins and I get an error message that "An error occured while reading the configuration"
Even when it was new the first AE took some doing to be seen by my Mac which was plenty annoying since it should just pop up but it did eventually connect via LAN. Once I configured it it worked on my network.
These things have been a real pain. Please advise.

Can I use airport express in a wired network to play music through my stereo?

I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater. This works, but there are some good days and some bad days where there are dropouts in the music. I have recently run Cat6 cable to my HT from my router next to my MacPro. This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc. I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch. I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE. Is there a way to force the wifi on the AE off and just have it for streaming from iTunes? Thanks.

Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

Can't configure airport express with laptop after 10.5.6 update

I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11format

I downloaded the airport utility and re-installed
and the problem was solved

Can I use Airport Express as a Wifi Extender?

Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

LukeW, welcome to the discussions!
Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

How many people can simultaneously share airport express network?

How many people can simultaneously share airport express network? I want to set up a wireless network in my classroom and need to accommodate about 25 devices.

The AirPort Express will only handle 10 wireless connections.
You will need to consider an AirPort Extreme....which will handle up to 50 wireless connections.

Can't Autodetect AirPort Express in Windows

Similar Messages

Maybe you are looking for