Can't backup my PSA file

Hello,
I recently lost a PSA file somehow when I started a new catalog up in Photoshop Elements 4.0. The new catalog was given a different name, but for some reason my original catalog of over 10,000 photos is gone.
In trying to figure this out, I went back into Photoshop Album Starter Edition 3.0. The catalog that came up was current through January 2006 (8000 photos), which was good news in case I don't recover my original catalog. I was advised to back this information up before trying anything else, but I have had some trouble. PSA SE 3.0 doesn't seem to have a backup/restore function like PSE 4. I found the PSA file and tried to back it up to a CD from outside of PSA SE, but an error message immediately informed me that Windows had encountered a problem and could not copy the file.
How can I possibly back this file up? Any more suggestions for getting my original PSA file back?
Thank you very much!
At my wit's end,
Kristie

Jim,
I appreciate the offer. Yes, I believe my computer is facing certain issues outside of Elements that could be complicating things. Certain very minor things have been a little bit off for a long time, ever since my brother partitioned the hard drive and installed XP Pro onto it. I had bought a larger hard drive in order to have more memory available, but the partitions in some ways have left me where I was with my older hard drive as far as memory is concerned. Some friends have recommended wiping the whole thing clean and starting over again. I have thought that is not such a bad idea, so I've been backing up all my important files in preparation for it. Just finished with my photos and Word documents.
My system seems to think it's operating well within the rules of whatever universe it has stepped into, so I haven't been getting many error messages at all, no matter what goes wrong. In any case, I'm not concerned about PSA SE anymore, as long as the backup I've made of the PSA file can be opened and reconnected to my photos without losing any pertinent infomation. Are descriptions that were written in the photo properties also contained in PSA SE's PSA file? I have written many extensve descriptions that I couldn't bear to lose! Perhaps I do need to worry about PSA SE after all...
I'm still holding out for my old PSE 4 catalog. Do you think I am risking anything by importing my PSA SE catalog into PSE 4 to back it up?
Thanks!
--Kristie

Similar Messages

  • Can TM Backup Files Located on G4 Running OS 10.4.11?

    Purchased MyBook and utilized the WD Backup software in order to backup files located on G4 running 10.4.11. Since then, have purchased a G5 iMac running 10.6.5.
    Before I reformat the MyBook in order to utilize TM to automatically backup the iMac, I'd like to ensure that I can also backup the G4 files using TM via File Sharing w/ethernet connection between the two computers.
    If TM can't do this automatically, I am prepared to copy the files from the G4 "manually" over to the WD MyBook once it is reformated. Since I am using the G5 almost 100% of the time, I am mostly concerned about creating a single backup of the entire G4 (which is already on the WD MyBook but will be lost if I reformat).
    What would be the best way to do that (creae a complete backup of the G4) if TM cannot be utilized?
    Thanks.

    Brae wrote:
    Purchased MyBook and utilized the WD Backup software in order to backup files located on G4 running 10.4.11. Since then, have purchased a G5 iMac running 10.6.5.
    A G5 iMac can't run OS X 10.6.5. Either it's an Intel iMac or it's running (at most) OS X 10.5.x. From your system details, it seems to be running OS X 10.5.6, in which case your message should have been posted in the Leopard area instead of the Snow Leopard area.
    What would be the best way to do that (creae a complete backup of the G4) if TM cannot be utilized?
    You could divide that WD disk into two partitions. Use one with Time Machine to back up the iMac. When you want to back up the G4, turn off Time Machine, dismount the WD disk, then use SuperDuper! (http://www.shirt-pocket.com/) or Carbon Copy Cloner (http://www.bombich.com/) to make a "clone" backup of the G4. After the backup is complete, dismount the WD disk, mount it on the G5, then turn Time Machine back on.

  • Can I backup and restore my itunes media using a hard drive?

    Can I backup and restore files if I used a hard drive?
    I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
    Thanks!

    The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
    RealDave

  • I can't backup my icloud on my ipad because icloud won't let me sign in with my new email address

    How can I backup my icloud files on my ipad and iphone when icloud won't allow me to login with my new email address when I try to initiate backup. My apple i.d.was successfully changed in April 2014 but some aspects of icloud don't seem to have accepted those changes.

    If you need to change the iCloud ID on it, you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • ITunes was on a drive destroyed by virus; how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

    how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.

    If you connect your ipod to your computer then look in the hidden folder labeled "iPod_Control" . (This is on a Mac version, but i think it's the same for Windows) and in "Music" is all your music mixed up in different folders. Just drag the MUSIC folder onto itunes then BAM! It's done ;D
    Source:... This is what I did when this EXACT thing happened to me ;D

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • I want to change the file location for the automatic backup file bookmarks.file, but I can't find browser.bookmarks.file in the list on the about:config page.

    I asked about automatic backup of bookmarks and received the following answer:You can make Firefox 3 create an automatic HTML backup (bookmarks.html) when you exit Firefox if you set the pref [http://kb.mozillazine.org/browser.bookmarks.autoExportHTML browser.bookmarks.autoExportHTML] to true on the about:config page. That backup is created by default in the profile folder as bookmarks.html, but you can set the file name and path via the pref [http://kb.mozillazine.org/browser.bookmarks.file browser.bookmarks.file] on the about:config page. I went to about:config page and toggled browser.bookmarks.autoExportHTML to “Yes” and it’s working. However, I want to change the file location, but I can’t find browser.bookmarks.file in the list.

    The browser.bookmarks.file preference does not exist by default. Right-click in about:config and select "New > String" to create it.

  • I can only backup the datafiles but not the control files and SPFiles

    Hello, all,
    I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
    1. the ARCHIVELOG is on
    2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
    3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
    4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
    Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
    Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
    Accept the default of 31days
    5. go to Schedul Backup
    6. select customized from the backup Strategy drop-down menu. Select the Whole Database
    7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
    8. in the Setting page, select “Disk”
    9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
    10. just submit the job.
    After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=268 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 11:20:54
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
    What should I do? Any advice is highly appreciated!
    Qian

    the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
    I reset these values and tried to backup the whole database. The same error appeared. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=245 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 16:40:05
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
    Any help is appreciated!
    Qian
    Message was edited by:
    QianChen

  • If I purchase a Mac can I convert my PC files saved on a backup to my Mac?

    If I buy a Mac, can I convert my PC files, folder, saved on a backup to my Mac

    Did you use a backup program?  The backup program could have saved the data in some funny way.
    If you copied them  with Windows copy  & paste or drag & drop,  you will be able to read the files on the mac.  You can run Windows on the new Macs.
    What type of files are we talking about?  Microsoft has office for the Mac. Word, Excel, Powerpoint files are supported.
    Robert

  • My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

    Hi
    My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
    Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    How can I back up my files before reformatting when I can't even open the drive's folder?
    Thanks for the help.

    I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
    Exactly this was the way I USED to make restores of files and photos..
    but know I CANT!!!!
    When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
    at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
    PLEASEE!!! Help me!!

  • Can I backup to Time Capsule after disk repair has failed? How can I save my files?

    Downloaded and installed most recent edition of Mountain Lion OSX. All of a sudden, drive is full. Delete photos, unused user accounts. MacBook freezes. Shut it down with power button. Now - drive verified. There are issues. Disk repair has failed - says backup whatever files I can and do a restore.
    Can I backup to brand new, never synced Time Capsule? All of the photos of my baby, wedding and the rest of the last five years of my life is in the balance.
    Help!

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • HT1766 How can I backup the iPad to the non-C drive of the computer that runs the itune?   I have already setup the library at a NAS and seems only media file are stored int he library.  iPad backup still need to take use my C: drive that is running out o

    How can I backup the iPad to the non-C drive of the computer that runs the itune?   I have already setup the library at a NAS and seems only media file are stored int he library.  iPad backup still need to take use my C: drive that is running out of space

    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • HT1766 Can the backup file for a IPAD be stored and accessed on an external drive?

    Can the backup file for a IPAD be stored on an external drive to free up space on a computer?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
    http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

Maybe you are looking for

  • How can i transfer imessage from my old iphone ?

    Hello I just switch from 4s to an iphone 5. I use my icloud account to synch everything. Do you know how can i retrieve all my messages (sms and imessages) from my old iphone ? Thanks Nicolas

  • Error during activation of DSO - Activation of M records from DataStore obj

    Hi All, Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable. When - During Activation of DSO State of DSO - Request become "RED", It is available f

  • File is not comming to target system

    Hi guru, i did the file to file scenario as per the Srinivas Vanamala blog. /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml

  • Cannot Re-Activate Phone

    I had to restore my phone after installing the new software upgrade. Well it was restored and now I have to re-activate my phone. Well everytime I plug it into my computer, and itunes comes up, it tries to connect but everytime an error message comes

  • Keep receiving error to launch adobe reader and accept agreement

    keep receiving error to launch adobe reader and accept agreement on a mac opening in safari