Can't bind IPX to NIC

Printers showing as "not connected". When I run autoexec.ncf, I get an
error FFFFFF85- failed to bind ipx to NIC. Checked out tech doc that says
no serverid # in autoexec.ncf. Problem is that there is a number assigned
to serverid. Serverid is listed after servername. I set up ipx support
during install. Any idea why ipx is failing to bind?

Make sure the number in SERVERID is unique.
What version of NetWare ?
Can you copy and paste your autoexec.ncf ?
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

Similar Messages

Can I Bind a Front Panel LED to a specific element in an array of booleans?

In LabVIEW 2010 I have a string of LEDs. I have and array of boolean values that contain the values that the LEDs should indicate.
What is the best way to connect the LEDs to elements in the array of booleans?
Can I Bind a Front Panel LED to a specific element in an array of booleans?
How is this done?
Can anyone show sample code?
Solved!
Go to Solution.

Imagine that you have an I/O card that provides 128, 256 or 1024 digital inputs and the requirement is to have an LED on the front panel to represent the state of each digital input. This frequently occurs.
Wiring that many digital inputs individually is a royal pain and then some !
It would make sense to have one shared variable as an array of Booleans that represents the status of all inputs and then use data binding instead of wiring each individually. The individually wiring would violate all recommendations on diagram size and fan out.
Frequently scanned For loops to update all of the LEDS would take alot of CPU time.
Wouldn't it be MUCH better if PSP could be used to update the LEDs whenever the data changed (as it is supposed to do) ?
In my case I have a LabVIEW Yaskawa servo driver that provides me information about 16 servo drives that may be connected. I have LEDs on the front panel to represent some of that status for each individual drive. But Yaskawa provides the information on the drives as an array of clusters of information for each drive, which I perform some business logic on and turn into shared array of Booleans to feed the LEDs (and some banks of switches as well).
Unfortunately LabVIEW does not seem to have any way to bind the LEDs (and Switches) to individual elements in the shared array of Booleans. It is just not that smart. Even with only several banks of 16 LEDs and Switches, wiring them individually using Decimate Array of Index Array functions is a royal pain and makes the block diagrams very large. It would be much worse and almost unreasonable to do if the size of the information was much larger.

Can't bind to color anymore. Solutions?

I'm new to JavaFX and it seems whenever I find example code like what I want to do, the new release has completely destroyed the functionality. Drag/Drop was one thing and now I find I can't bind to the red,blue,green attributes of the Color object. What are some work arounds?

Use bind Color.rgb(0, green ,255) function.
For example:
import javafx.scene.*;
import javafx.scene.paint.*;
import javafx.scene.shape.*;
import javafx.ext.swing.*;
var green = 10;
Scene {
    content: [
        SwingSlider {
            minimum: 0
            maximum: 255
            value: bind green with inverse
            vertical: false
        Circle {
            centerX: 100,
            centerY: 100
            radius: 40
            fill: bind Color.rgb(0, green ,255)
}

Can't bind to /tmp/claws-mail-1000

When i try to start claws-mail i got this output:
[tirrenia@lappy ~]$ claws-mail
can't bind to /tmp/claws-mail-1000: Åtkomst nekas
Åtkomst nekas is Access/Permission Denied in Swedish.
Anybody have an idea?
Thanks

It is:
drwxr-xr-x 4 root root 136 12 aug 01.01 /tmp
And when i try to start xmms i got this:
[tirrenia@lappy ~]$ xmms
** CRITICAL **: setup_ctrlsocket(): Failed to assign /tmp/xmms_tirrenia.0 to a socket (Error: Åtkomst nekas)

Can we bind the same fragments into different xsd Schemas

I have created different fragments for a single form. I have to render the fragments as well as the complete form on the web. I have created the different services for each fragment and bind the schema with them and this works fine for me but while using the same all fragments in one complete form I am not able to get the data. How can I do this?
Can we bind the same fragments into different Schemas? If yes, then how?
Or we need to follow some other approach?

yes, we are using the LiveCycle Designer and LiveCycle Workbench Process for rendering the PDF form.

Can't bind status field in user defined table

Hi!,
I want to display the status of my document type user table, I added an EditText (unique id = txtStatus) control in ScreenPainter and Iam getting a Can't Bind error in this line of code. @Meta is my user defined table of type document
((SAPbouiCOM.EditText)oForm.Items.Item("txtStatus").Specific).DataBind.SetBound(true, "@META", "Status");
Thank you!

2 alternatives:
1.Bind the Status field to "textStatus" EditText field in ScreenPainter
2.Either in your code, bind the Status field to a ComoBox field since it has valid values.
Both works fine in my test.
By the way, I get the same error Status field to "textStatus" EditText field.
Kind Regards
-Yatsea

After NICs teaming, DHCP can't bind the NIC, and DHCP stop working.

Hello, we have a DELL Server with windows 2008r2,
I used the windows network Bridge first, in that situation I can see DHCP can Bind the "network Bridge".
Now I need use LACP to team the NICs, I downloaded the
Broadcom Advanced Control Suite to Teaming the 3 NICs(BCM5709C),
I followed this video, and the teaming works, but now in DHCP I can't see the virtual adapter,
https://www.youtube.com/watch?v=x2nq-qEwAzg
The DHCP got 1041 error: The DHCP service is not servicing any DHCPv4 clients because none of the active network interfaces have statically configured IPv4 addresses, or there are no active interfaces.
Same like here
http://www.experts-exchange.com/Networking/Network_Management/Network_Operations/Q_28159948.html
Anyone had this issue before and know a solution?
Thanks
Jason
Jason

Hi,
I am investigating the issue. I did find a post here
https://communities.intel.com/message/61068 that indicates after configuring NIC teaming you might need to wait a while for the team to initialize before configuring a static IP address. Otherwise, the static IP address does not work correctly.
-Greg

Can not bind server stubs.

Hi All,
i am strugling for a few days (!) now with a starnge problem
i have created an rmi application and when i run under windows all is well.
when i tried running it under Linux (Red Hat 7.2) and the stubs where not packed in a jar file all is well as
well. BUT - if i pack the stubs in a jar i get an exception :
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: (<name of class>...)
The Exception occour when i try to BIND the stub not when the client is looking for it.
i have set the policy , classpath , and security manager properly obviously since the appliaction is working
ok when the stubs are not packed in a jar. the jar file is at the same directory as the unpacked stubs when
the application is runnig so i dont think it is a classpath issue.
Can anyone please help ? thanx.

I don't, sorry. I suppose windows is making a informed guess about the path to the classes. I'm only using linux and Java 1.5 and I have to make sure and expose the interfaces I bind to the rmi registry. Not sure which behavior is supposed to be the correct one.

Can't bind server to OD, replication broken, users at some sites can't auth

Hi all,
Having a doozy of a problem with our OD at the moment, hopefully someone can help
The setup:
1 OD master and 3 replicas at head office here, all running 10.5.5 (issue also occurred in 10.5.4)
Around a dozen remote AFP & SMB file servers, all are setup as "Connected to a directory system"
Most sites are OK, but we have issues at 2 sites.
Setting each site to "Connected to a directory system" fails at the Directory Utility stage. We try and add the master (or even some of the replicas), put in the diradmin name and password, and attempt to bind, but it responds with an error after a while.
The error states that there is already a computer with this name, and prompts to overwrite. Overwriting fails also.
I did a search and found this:
http://support.apple.com/kb/TS1245
and this:
http://forums.bombich.com/viewtopic.php?t=11834&highlight=lkdc
But neither tips help
Attempting to set up the 2 remote servers as replicas stops at the "Enabling Password Server Replication" stage. I can close out of the assistant at this stage and am left with a "broken" replica, which has 2 out of 3 things running:
LDAP Server: Running
Password Server: Stopped
Kerberos: Running
On the master it says "Password Service Not Found"
So it seems that setting up replicas on a different subnet doesn't work.
I've tried getting my ISP to set up a static route for the VPN tunnel, and this worked for a set of blank test servers with no extra users added to them.
Interestingly, setting a user's password to "Crypt" in WGM allows them to authenticate to the "broken replica" and access their files. Setting their password type to "Open Directory" has no luck at all.
If I jump on the server and try a password check in the terminal, I get:
AFP:
dirt -u username -p password
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Call to checkpw(): Bad Password
path: /LDAPv3/10.10.20.1
Username: username
Password: password
Error : eDSAuthFailed : (-14090)
SMB:
dirt -a nt -u username -p password
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
path: /LDAPv3/10.10.20.1
Username: username
Password: password
Good
The master's IP is 10.10.20.1.
Users can sometimes connect via SMB instead of AFP, which is a workaround for now, but I'd like to know why this is happening.
I've tried setting the AFP server's authentication methods to Standard instead of Any or Kerberos, to no effect.
Does anyone know why these servers won't bind and won't replicate, and only allow connections if people use Crypt passwords? Is my Kerberos stuffed?

Well, I tried to demote, then promote my master with no luck. During the upgrade from Tiger to Leopard, the password service cache (or whatever it's called) was somewhat corrupted. My OD Archive failed to restore !! I had to rebuild my entire OD from scratch.
Now I have slightly less errors. My replicas joined up fine. Kerberos passwords get propagated when a password changes, but samba passwords do not. Samba working is essential as 95% of the clients machines are windows boxes. Here are a few quick tests I did:
replica1 root# dirt -m /LDAPv3/127.0.0.1 -u fred
User password:
2009-01-15 17:13:16.919 dirt[4224:10b] password is : <password>
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Username: fred
Password: <password>
Success
replica1 root# dirt -m /LDAPv3/127.0.0.1 -a nt -u fred
User password:
2009-01-15 17:13:23.160 dirt[4233:10b] password is : <password>
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Username: fred
Password: <password>
Error : eDSAuthFailed : (-14090)
On the master this all works fine.
The funny thing is that my diradmin account has not problem on the replica.

Can i Bind more than one Model object to the Custom controller or not

Hi All, I trying to bind more than one model object to the custom controller, Both the model objects contains same attribute name called ( output). Both model objects created on to top of the BAPI. So when i bind first model object to the custom controller will work fine. When i am trying to bind the second model object to the same controller. This second model object also having the same attribute name called "output" . So it is giving an error of "Duplicate context element "Detail". Rename or uncheck duplicate elements.
can i assign more than one model object to the single controller or not?
But in the reference document, it has given that , we can create model object with more than one bapi.So in this case if both the bapis contains any element with the same name will also be problem. Any body give me the solution.
Initially we have created one custom controller for each model object. But later i realized that, why con't we use same controller for all the model object. Because, the custom controller context is the public context. this context shared across all the view controllers.
The concept which I am trying to do is right or wrong?

Hi Vishal,
of course, you can bind one controler to many models. When the same name occours you can simply RENAME binded node in controler.
Regards
Bogdan

How can i bind something to caps lock in AwesomeWM?

Recently i've aquired new notebook which doesn't have caps_lock, num_lock and scroll_lock LEDs, so i decided to put keyboard layout indicator to system tray.
Currently i am using Xorg config to set XkbLayout and XkbOptions (like so http://paste.pocoo.org/show/478789/ ).
I tried first widget from http://awesome.naquadah.org/wiki/Change_keyboard_maps but soon realized that it does not detect layout change in any way, so i would like to bind kbdcfg.switch function to caps_lock, but i can't find any documentation on binding something to caps_lock.
Also i've noticed a strange thing, when i change my layout with this function i am unable to use shortcuts that use latin letters. They are obviously remapped to by сyrillic, but they do work if i change my layout with caps_toggle. Why do the work with caps_toggle, and how can i make them work with kbdcfg.switch?

blin wrote:
filam wrote:Is there a reason you're not using xmodmap? You may also want to read the Extra Keyboard Keys in Xorg article.
The only reason i have for not using xmodmap is, i don't understand how it can help me, with the task i have. The other article didn't help me either.
Did you read the "How to find capslock status?" thread?
blin wrote:Is suspect the answer is not what you want because your question is not very clear. I understand that you have a keyboard that is lacking certain keys. What is it that you want to achieve? Let some key act as capslock?
I had to read the OP twice to understand it. I didn't notice that he wrote "LED" in the first sentence. What he wants is for his Awesome status bar to display the current activity (i.e. on/off) of the Caps Lock, Num Lock and Scroll Lock keys. He does not need to remap any keys.
Edit: Check Retrieving CAPS LOCK info using Xlib or just do a Google search for "linux caps lock status -map -disable".
Last edited by filam (2011-09-20 19:43:45)

How can I bring back the nice big refresh button?

The refresh button used to be a nice big one at the top left. Now it is a tiny one hidden near the search stuff on the right. I want the big one back.
And while we're at it, I'd like the home button to be bigger again, as well. How can I do that?

Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end side of the location bar.<br />
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
If you type in the location bar then that button becomes a Go button.<br />
Middle-click the Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

How can I bind a component to ADF?

Hi all!
I'm really new to OOP, Java, and JDeveloper. I managed to create a small ADF Swing application successfully through the wizards, help files, and examples.
I want to incorporate the components of SwingX into it, specifically having auto-completion in my combobox.
I did the following:
import org.jdesktop.swingx.autocomplete.Configurator;
JComboBox mycomboBox = [...];
Configurator.enableAutoCompletion(mycomboBox);
but when I run the form, mycombobox just displays "oracle.jbo.server.ViewRowImpl@2" and it doesn't auto-complete.
Searching the forums, Erik said "If you are trying to bind the component using ADF, then you will have to create your own custom binding class. Depending on the component's needs, you might start with adapting the JUTextFieldBinding to work with your component.".
Can someone point me to a "HOW-TO" guide for the above, esp. code samples etc...
Thanks.

Unfortunately, the solution is very complicated due to the way the JUComboboxBinding is implemented. It doesn't require a custom ADF binding class, however.
I'll see if we are able to provide some of the pieces needed to duplicate what we have done to use SwingX auto-completion.
Erik
P.S. Let me know if you need to use a SwingX JXTreeTable. We do have a custom binding class for it that we should be able to share.

How can I bind a operation with a table

Hi !
I'm trying to bind a operation with a table, so what type of operation return ? ViewObject or a Vector? And how can i set params to these operation if my operation has some param ( getSubscriber(int iSubId, int iSubType) )
Thank a lot for your help

Hi,
it depends on the release you are asking this question for. In JDeveloper 10.1.3 you can expose a method (e.g. on a session facade) that returns a Collection. The input parameters can be dragged and dropped as input fields to the page.
The same can be done in JDeveloper 10.1.2, but here you have to prgrammatically apply the input arguments.
Frank

Can anyone explain ipx?

I'm not sure this is the correct forum, but here goes. I'm
trying to track down an ipx issue and have noticed that some
systems seem to respond to an ipx ping while others do not.
At what level does this response take place? Is there some
parameter in the driver that enables/disables it? Is this
just something that may or may not be implemented in the
driver? Thanks.

Bob,
> I'm not sure this is the correct forum, but here goes. I'm trying to
> track down an ipx issue and have noticed that some systems seem to
> respond to an ipx ping while others do not. At what level does this
> response take place? Is there some parameter in the driver that
> enables/disables it? Is this just something that may or may not be
> implemented in the driver? Thanks.
not all systems reply to ipxping. It depends on the IPX implementation
of that specific OS rather than the driver. For instance, workstations
dont' reply to IPXping.
What are you trying to troubleshoot? Maybe there are other ways to do it
and we can help.
Cat
NSC Volunteer Sysop

Can't bind IPX to NIC

Similar Messages

Maybe you are looking for