Can't blend two Raw files into single file in CS2

I have created two Raw files with one focuses on highlight while the other on shadow. Within Photoshop with these two files open my intention is to use the Move tool and drag-and-drop one image over the other as a layer. At the present I am having trouble to get these two images to register as two layers.
Am I missing something? I have hold down shift key while doing the drag-and-drop, but no luck. Please advice.
Thanks,
Joe

Yes, I did try to drag within one Raw created image on top of a second one in order to perfectly aligns it. If it works the second image would registered as a second layer on the right panel. I believe this exact alignment of one identical image over another is referred as "pin registered".
I first learned about this technique from John Shaw's eBook on Digital Photograpy. This is a very handy to add details which otherwise would not be possible with a single image when it is exposured for either highlight or shadow.

Similar Messages

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

How can I combine two itunes accounts into one?

How can I combine two itunes accounts into one?

Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased. Apple provides no way to change this.
However, if you wish to put content from two accounts into a single iTunes library, you can easily do so. Use the command File > Add File (or Folder) to Library.

Can't find any raw files to convert when I am using Adobe DNG converter

Recently I purchased a new Olympus XZ-1 camera. I shoot exclusively RAW pictures (raw files for this camera are called .orf). Then when I tried to import these .orf files in the organizer of Phtoshop Element 8 it was imposible, nor then I could see those pictures in the organizer. By surfing on diffrent forums, I was able to figure out that Camera Raw included in Element 8, Camera Raw 5.5, is not supporting the .orf raw from Olympus and if I didn’t want to upgrade my Element 8 to Element 9 or 10, a simple alternative was to download Adobe DNG converter to convert all my .orf files into dng files, which could then imported by Element 8 and opened in Camera raw 5.5.
I downloaded DNG converter version 6.6 and installed it in on my computer running on Windows 7. The problem is that once inside DNG converter, when selecting the folder where all my .orf files are (Select folder), I can't see any raw files to convert there! I tried to select a folder with NEF files instead (raw files from Nikon) and it is the same problem! Why can’t I see those files of mine I want to convert when I select the folder in DNG converter?
I'm dying for help!
Thanks a lot!

When you are selecting the folder in the DNG converter, you only click on the folder. You DON'T double click on the folder. After you have set your options, and chosen the folder, you click on the Convert button. It is only after you have clicked on Convert that you will see the list of files that are being converted. You will also be able to see an indicator of the progress of the conversion. It really does work. Just to verify, the procedure I outlined is one that I did just prior to trying to write the instructions. It really isn't rocket science. Just choose the folder, only the folder, and click on the Convert button.
You'll notice that the button prompts you to select the folder, it doesn't say anything about selecting a file. You only select the folder that contains the files. You will never see a list of files using this method. If you only want to convert one or two images you can use the other method. Leave the DNG converter closed, open the folder containing the DNG files in your operating system folder browsing utility, choose the file you want to convert, and drag it onto the icon for the DNG converter. That is how you choose individual images.

How to Append two word documents into single using   java

How to Append two word documents into single using java
we tried this but it's not append the one word document to other
source code:public class AppendTwoWordFiles {
     public static void main(String []arg)throws IOException
          FileInputStream fi=null;
          FileOutputStream fo=null;
          try {
               System.out.println("Enter the source file name u want to append");
               BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
               File f1=new File(br.readLine().toString());
               System.out.println("Enter the Destination file name ");
               File f2=new File(br.readLine().toString());
               fi = new FileInputStream(f1);
               fo = new FileOutputStream(f2,true);
               byte b[]=new byte[2];
               while((fi.read(b))!=-1);
          fo.write(b);
System.out.println("Successfully append the file");
          } catch (FileNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          finally{
          fi.close();
          fo.close();
plz reply me quickly ,,,what can i follow

Use this code ..
and give the path of the both file like this.....
source file ---- C:/workspace/Practice/src/com/moksha/ws/test/practice.text
destination file ---- C:/workspace/City/src/com/moksha/ws/test/practice1.text
import java.io.*;
public class AppendTwoWordFiles {
     public static void main(String[] arg) throws IOException {
          FileInputStream fi = null;
          FileOutputStream fo = null;
          try {
               System.out.println("Enter the source file name u want to append");
               BufferedReader br = new BufferedReader(new InputStreamReader(
                         System.in));
               File f1 = new File(br.readLine().toString());
               System.out.println("Enter the Destination file name ");
               File f2 = new File(br.readLine().toString());
               fi = new FileInputStream(f1);
               fo = new FileOutputStream(f2, true);
               byte b[] = new byte[2];
               int len = 0;
               while ((len = fi.read(b)) > 0) {
                    fo.write(b, 0, len);
               System.out.println("Successfully append the file");
          } catch (FileNotFoundException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
          } finally {
               fi.close();
               fo.close();
}

Can you export a raw file photo with Lightroom adjustments attached?

Can you export a raw file photo from Lightroom with Lightroom adjustments attached in some way? If not what is the equivalent? There are some individuals I would like to send the full data of the raw file, but with the non-destructive Lightroom adjustments layered on top.
--Gerry

You can select "Original" as the file type, in Export. This saves out a copy of the imported source file into the selected location, labelling the current adjustments onto that image. When this is sent to somebody and imported to LR / opened in ACR, these metadata will be found and used automatically, with the exact same outcome as within your own LR Catalog - provided the LR / ACR versions are sufficiently compatible, and provided camera and lens profiles applied to the image, are present in both contexts.
LR uses whatever method is normal when writing metadata, for each file type involved. So, if one imported file is a proprietary Raw file, LR will write an XMP file alongside. If another is capable of having metadata written into its file header, LR will do that instead.
One important difference between doing this, vs writing LR metadata out to your original imported file, and sending that: the Export Original method will work in the same way, just as successfully, for one or more Virtual Copy versions (duplicating physically as needed), as it will for the primary Master version - relating to a given imported file.

I have a canon D70 camera and I can't download my raw files to elements 11 or lightroom 4

I have a canon D70 camera and I can't download my raw files to elements 11 or lightroom 4

If you don't use the DNG Converter to create DNGs from your raw files, then you'll need to purchase LR 5 to us LR with your camera that is newer than LR4; however, there is something you can do for PSE11:
ACR 8.3 will work with PSE11 to open 70D files, but there is no installer, so you have to be a little devious to get things to all work. You also need to be on a Windows 7 or 8 since ACR 8.3 supposedly doesn't work on Vista. I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
I was able to get 70D files to open in ACR 8.3 on PSE11 by doing the following:
Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
Unzip this downloaded setup.zip to a folder somewhere.
Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928. Note that this is the folder without x64 in the path. PSE11 is a 32-bit program so we need the 32-bit version of the plug-in.
Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
Inside Assets1_1.zip there is a file called 1003. This is the largest file in that zip and is the plug-in you need.
Copy this 1003 file into the existing PSE11 camera raw plug-in folder:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 11\File Formats or for a 32-bit Windows OS, into: C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 11\File Formats
Rename the existing Camera Raw.8bi to Camera Raw.8bi_7 (in case something doesn't work and you need to rename it back, later).
Rename 1003 to Camera Raw.8bi
After these steps you have the ACR 8.3 plug-in installed in PSE11 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

Nikon D800 can't open all RAW-files ending .NEF

Got a Nikon D800 and can't open all RAW-files ending .NEF Most of them no problem, but some I just can't.
"Could not complete your request because the file appears to be from a camera model" Thats not wight cause I can open like 90% of my .NEF files :/
Got latest Camera Raw (6.7)..Help please:/

Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
Nikon does it, Canon does it, and also several other camera makers.
There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
Camera Raw plug-in | Supported cameras
Versions of ACR are specific to each version of Photoshop.
Older versions of PS cannot use the latest version of ACR.
You need to download the latest version of Adobe DNG Converter.
This will convert your newer D800 files to DNGs that can then be opened in older versions like CS5.
Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

How can I upload my RAW files from my Nikon D750 to my MAC computer? I now have Camera Raw 8.7.1. and updated my camera and still not working:(

How can I upload my RAW files from my Nikon D750 to my MAC computer? I now have Camera Raw 8.7.1. and updated my camera and still not working:(

Which version of mac os x do you have?
Which version of photoshop are you using?
Do you get any message when you try to open the files into photoshop?
Did you use Nikon Transfer to get the files from your camera to computer?
Did you try the File>Get Photos From Camera in Adobe Bridge?

Aperture library can't link the RAW files.

I am pretty much pulling my hair out on this. I setup Aperture so all files are collected and held into the APlibrary files.
My Aperture library also resigned on an external drive. One day I realized that I needed to reformat the drive so I copied the Aperture Library off onto another drive. When I went to choose the new Library which was the backup, all raw files couldn't be found. At first it was unrecognized file error, and now it just shows the jpg.
I ran Aperture holding the keycombos to fix permissions, and do a rebuild of the Library. What that did was make it so I wouldn't get an error but it replaced everything with the JPGs and no raw files to be found.
Next I renamed the aplibrary file to .foo I opened it up as a directory and then started to rename the project folders so I could open those. All of the NEF (RAW) files are there intact which is great, but I need to connect everything so I still have the Raw files with all color adjustments.
If anyone can point me in the right direction, that would be great. I don't know what else I can do.
Thanks!

Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

Can Aperture 3 read Raw files from Canon G1X?

Is Aperture 3 capable of reading Raw files from a Canon G1X?
I'm currently using an elderly version of IPhoto, having resisted upgrading because of negative feedback about the latest version. My IPhoto version cannot read the Raw files from the G1X. I also tried importing one into Picassa, but the colours looked completely wierd.
I'm now considering buying Aperture 3 but will maybe wait until:
a. Aperture 4 is released and;
b. I know that Aperture can indeed read the Raw files from the G1X.
Any help/advice gratefully received.
Frank P

see this list:
Aperture 3: Wide raw support for leading cameras:
http://www.apple.com/aperture/specs/raw.html
Your camera is supported by Aperture 3.
P.S. and the camera is supported by MacOS X 10.7.4.,
see: OS X Lion: Supported digital camera RAW formats
http://support.apple.com/kb/HT4757
What is your MacOS version? Perhaps upgrading to 10.7.4 should make the raw support available in iPhoto too.
Regards
Léonie

Why can't my computer update elements 9 - keeps coming up as error and try later. I can't now process RAW files it comes up as CR2

why can't do updates for elements 9 keep coming up as "error in system try later" I can't now process RAW files they come up as CR2. This has happened in lightroom 5 also

594594
What is your program - Photoshop Elements 9 or Premiere Elements 9? If Photoshop Elements 9, you have posted in the wrong forum. You have posted in Adobe Premiere Elements Forum (video editing). Although Camera Raw allows for the import of raw format image and dng into a Premiere Elements project as source media, you cannot "process" it in the Camera Raw dialog. You need Photoshop Elements for that.
If your program is Photoshop Elements, please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
Some information that might help as you take care of the above....
Does your current problem exist with and without antivirus and firewall(s) disabled?
Are you getting an error message (number/code) associate with your Help Menu/Update?
The latest version of Camera Raw that is supported by version 9.0/9.0.1 seems to be 6.5. Do you have that currently installed?
If you cannot get the program's Help Menu/Update to work for you, then download and install Camera Raw 6.5 from the following from Adobe
For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263
For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
What camera are you using to generate your raw format images.
Camera Raw plug-in | Supported cameras
If it is not yet supported by 6.5, then
a. move to a later version of Photoshop Elements that supports a later version of Camera Raw that supports your camera.
b. use the dng converter
ATR

Why i can't open my raw file in adobe photoshop cs6... and i use camera Canon 650D

why i can't open my raw file?

You probably need to update your Camera Raw plug-in for CS6 to something new enough to understand the 650D raw files.
The usual way you’d do this would be Help / Updates in PS.

How can I delete two .jpg files from my desktop that refuse to be deleted?

How can I delete two .jpg files from my desktop that refuse to be deleted?

The two icons refused to be moved to the garbage. The good part in all this is that ater I turned off the computer at night and turned it back on the next morning they were gone!
Thanks.

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

Thank you for your valuable advice. I've solved the problem right now.
Thanks
2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
I have Photoshop CS 5.5 version, but I've just changed my camera and
I can't open my raw files. I need for my new camera Photoshop CC and Camera
Raw 8.7 version. How can I do to update the old version? Thank you
created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7302535#7302535>

Can't blend two Raw files into single file in CS2

Similar Messages

Maybe you are looking for