Can't Block Person in iChat, with task bar drop down menu in Buddies.

Hello : )
I was wondering if anyone knows how i can use my "Block Person", on iChat (task bar with drop down menu in Buddies). I am pretty sure this worked has worked before , the command is there it just seems to stay greyed out. I know it can be done in the Security tab / ichat preferences, I would like it to work under the Buddies drop down as well. I know it did before, my HD was replaced. Help would be most appreciated.
Thank you for your time.
Eme;~[)

Hi Eme,
Ok. iChat 3 has a setting that needs to be set if you are going to use the same screen name on two copmuters or on two apps on the same computer.
Go to iChat > Preferences > Accounts
Select the AIM account in question in the left hand column
Select the Account Info tab.
Log out of AIM (iChat menu)
Check the check box "Allow Multiple Logins for This Account"
Log back into AIM.
If this is not checked starting iChat 3 will boot off (log out) any other AIM Client using the same screen name whether it is on the same computer or not
From what the ISP says and what you have posted here it seems the modem is in Bridge mode.
I take it if you open System Preferences > Network > Select Airport from the second drop down > TCP/IP tab you IP is shown as 10.0.1.2 ?
And the drop down just above that says "USING DHCP" ?
This would mean the Airport is in default mode and Issuing Addresses.
Also by default an Airport would do NAT. (Network Address Translation)
This measn the Airport sorts out where each bit of data has to go.
It is different from other routers as you don't have the specify which ports are going to whch ports on one IP (Port Forwarding)
Which Netopia device is it ?
3347 ?
If it is this one you may need to look at the QoS settings.
These are setings that are supposed to protct you form reciveing data too quickly. (helpful if you are running a busy web site but restrictive sometimes for iChat).
As you are omly talking about sorting out Block lists it is prpobably the multiple login option that needs doing.
5:40 PM Wednesday; June 14, 2006

Similar Messages

I can't seem to open additional tabs with the +, the drop down menu, or Command T? Is this a bug, or am I missing something?

Hello,
I can't seem to open additional tabs with the +, the drop down menu, or Command T? Is this a bug, or am I missing something?
I'm running Firefox 30.0 in OS 10.8.5 on a Mac Book Pro with the 2.7 GHz Intel Core i7 and 8GB 1333 MHz DDR3 memory.
Thanks in advance,
Pat

BOOM! You have hit the nail on the head, sir!
I disabled my Vuze Remote Community Toolbar and the problem was fixed.
Thank you, the-edmeister!!!!

Problems with mm_menu.js (drop-down menu)

I've made a couple of sites with mm_menu.js (drop-down menu) made by Dreamweaver. It works fine in Firefox, Google Chrome. It worked fine in Internet Explorer up to version 9. In version 10 the mm_menu.js doesn't show at all, and in version 11 it does
show up, but places itself in the upper left corner of the browser. Can anyone explain why this is so? Is there any fix one can put in the code to make the drop-down menu look correct?

This is the TechNet Forum for Questions regarding Internet Explorer 8, 9, 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions.
For better assistance please ask for help in the MSDN IE Development Forums.
Thanks & Regards,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

Can I change the order of lines in a drop-down menu?

Can I change the order of items on a drop-down menu? Specifically, the "open" menu that comes up when I right-click on a link.
Putting "open in new tab" on top of "in new window" makes sense, of course, since it is used more often. But I do a lot of surfing, and had the old position in muscle memory. Re-training my brain to click on the first line instead of the second is taking a long time, and makes me grumbly.
I'd love to put it back to the old order. Can I? and, if so, how do I do it? (Please give me detailed instructions, IOW, please assume I am a complete simpleton, because sometimes I am.)
HP G62 w/ Win 7 home premium. If it matters, it's 64-bit.
And my old desktop, which has, yech, Vista. (I haven't upgraded it to F4 yet.)
Thanks,
Roo

Where is that drop-down list, on a webpage?
Please provide a screenshot of that issue. <br />
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem <br />
It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

Every single website, or link within a website page is being added to my location bar/address bar drop down menu. How can I stop this? This just started happening.

Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.

How can i programmatically add a text in a combobox drop down menu ?

How can i programmatically add a text in a combobox drop down menu ? Can it be possible using any property node?

You've posted to the wrong forum. Please post to the LabVIEW board.

Problems with flash transparent drop down menu over html in some browsers

Hi everyone... this is my first post and it's about an issue
that's causing me a few problems.
I'm currently designing/ building my company's web site, the
test page be viewed here: www.musflashtv.com/test.htm
1) This layout contains an embeded flash movie (.swf) with a
transparent background, this is the main navigation.
The flash navigation has a drop down menu that animates down
and covers the html page (containing links) below.
The problem is that in most current browsers such as; Firefox
2.0.05 (links below template don't work), Netscape 8.1.3
(navigation drop down and links don't work) and Opera 9.10 (links
below template don't work), any links just below the 'invisible'
transparent area coverd by the navigation can't be clicked 'through
the flash file'. The exception is IE 7.0, everything is fine there.
(it hasn't been tested in any mac browsers though).
Because the area below the navigation on
www.kitachi.info/work is one large dummy jpeg file, the link below
would be a much better example to look at.
http://www.musflashtv.com/shows/ind...tlight-Sessions
The flash navigation is embedded in the html (tlp) template
file using the code below and aligned using an external style
(.css) sheet, this html code not only embeds the flash movie but it
also tells the browser to display it's background and as
transparent. The flash movie is embedded in a layer that sits above
the table.
3) The flash embed code:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
name="shows-navigation-tranparent" width="851" height="300"
align="top" class="flash-navigation"
id="shows-navigation-tranparent">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie"
value="flash/navigation-tranparent.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="bgcolor" value="#000000" />
<param name="SCALE" value="exactfit" />
<embed src="flash/navigation-tranparent.swf" width="851"
height="300" align="top" quality="high" wmode="transparent"
bgcolor="#000000" name="navigation-tranparent"
allowscriptaccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
scale="exactfit" />
</object>
Does anybody know of any code that can solve this problem or
know a different way of creating a flash navigation with a drop
menu that can be embeded over html?
Any help or advice would be greatly appreciated especially as
this issue is holding back progress in a big way.
Thanks in advance guys!
Adie

It's IE-only behaviour as a result of changes Microsoft made
last
year to their browser, regarding how Active Content (Flash,
Quicktime etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2, the fix is already built
into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swizzle_16" <[email protected]> wrote in
message
news:eqr0ib$48r$[email protected]..
> Help please, I've put together a website using a drop
down menu system
> that
> needs to drop down over a flash animation - I've managed
to get the drop
> downs
> to go in front of the animation using the transparent
tag - but each
> option has
> to be clicked on twice to get the link to work.
>
> Does anyone know how I can change it so the link needs
to be only clicked
> once?
> The drop down menu system I've used is : * AnyLink Drop
Down Menu- ©
> Dynamic
> Drive (www.dynamicdrive.com)
>

Help with jsp and drop down menu

hi, im tryin to put a drop down menu using javascript, is the example in the page:
http://tutorials.alsacreations.com/deroulant/
but creator detects a error:
The content of elements must consist of well-formed character data or markup.
int creator and when i deply the proyect, here is the code:
<script type="text/javascript">

</script>
Can anybody tell me what im doing wrong?

hi,
Creator does not recognize (or whatever you say) characters like '<'. You can import js file which includes your script or change these characters for example put "<" instead of "<".
regards...

I can't find the answer....about drop-down menu's

This is my first post, but after looking everywhere for the
answer I decided this is my best option. I am trying to create a
drop-down menu with an option for SELECT ALL which would select all
from a table's field via a select statement via a URL parameter. I
have tried inserted the value's *, %, and -1 but none of them have
worked. Do you know what I would need to do in order to select all
the values in a table (this one lists zip codes)?
Thank you again. If you have an answer to this you are my
hero.
~Craig

When customizing my Button Toobars I can't get the Bookmark Toolbar Drop down menu to stay, it simply disappears once I close the customization window

--urgent Can I use table data to create a dynamic drop down menu?

Hi,
I am asked to investigate the possibility of using APEX to create a table driven dynamic drop down menu? The deadline is tomorrow but I have spent quite a bit of time but still have not any clue. Can any one have such experience to point me a way to focus on?
Many thanks.
Jennifer

Thanks you very much for the help Kevin.
Currently my company is using htp.p style to create web app and using the dynamic menu in a similar way as you explained. Now they want to move to Apex and still keep dynamic menu functionality. After reading your response and research I have done I think I can embed it into Apex application by creating the similar table and PL/SQL package and let Apex to call the PL/SQL package when the application is first called. However may I ask you a question about how to call such pl/sql procedure in Apex? .
The current application has the following URL, from which the procedure pkg_main.print_menu is called and html home page with dynamic menu is displayed.
Http://app server:1234/pls/applicationname/pkg_main.print_menu?p_new_window=N
BUT what about the Apex? The Apex URL format is like the following, where 11563 and 1 is application id and page number. Assume that 1 is home page, but HOW the procedure is called, from WHERE?
http://apex.oracle.com/pls/apex/f?p=11563:1:3397731373043366363
Jennifer

Can't select number and type of tracks from drop down menu!

When I create an empty project you are supposed to be able to select the number and type of tracks you want from a drop down menu. This menu worked when I opened logic for the first time. In subsequent new projects this window does not drop down fully and I'm unable to make any selections!
Can anyone help?

Thanks for your replies.
I tried Eriksimon's solution which worked the first time i re-opened Logic, but reverted back to how it was everytime after that!
As you'll know when you launch Logic you get prompted to choose a template, so i slect empty project, then when the main window opens you're prompted with New Tracks drop down/pop out box. What I should get is a choice of Type - Audio, Software Instrument and External MIDI with another section underneath with Format, Input, Output etc... All i get is Number of tracks to choose and External MIDI as the only option! Even if i create the track any subsequent tracks are all External MIDI, no other options!
When i installed Logic i left off the Jam packs as i'm short on HD space at the minute, i don't think this would be the cause but it's the only thing i've left out of the installation. If i have to re-install i will, but it took nearly 2 hours!

Problem with checkbox and drop down menu

I am using DW8 with PHP/MySQL.
I made a insertion form and a couple of the fields are
checkboxes and another is a drop down menu. Everything works fine,
however, when I create an update form and the recordset calls the
data it doesn't retain its values on those items.
For example, if I checked a box when inserting the record and
then call the data up for the update form, the box is not checked,
making the user believe it was never checked in the first place.
The same thing goes for the drop down menu. If I have 3
options in the menu and someone selects the third one, when the
update form is used it defaults to the first option automatically
instead of actually calling up the original value selected.

The fact that two scripts do not work together does not mean
there is a bug in the RH script. It is simply that they were not
designed by their respective developers to work together. This
happens with multiple scripts in any html file.
Try creating a new project and then importing just this topic
into it. Does it still have the problem?

Why can't I find preferances in the edit tabs drop down menu?

Although I had Indesign CS6 for over a year this is my first time using it . I want to set the default page size to inches, instead of using Indesigns default settings. Following Terry Whites instruction From the video clip on YouTube I tried finding Preferances in the Edit tabs menu, But when I click on the edit tab I can't find preferances in the drop down menu. What am I doing wrong or what am I not doing. sombody please help me to change this setting. I know nothing about the measurement type that indesign uses as a default.
Thank you, For your answers.
laverne

If you use a Mac they'd be under the InDesign menu....

Can't select 'all layers' from the healing brush drop down menu

I just installed PS6 and while cleaning up a picture I found this very frustrating: I created a new layer on top of the one I'm editing and wanted to remove a couple of blemishes. but when I hit J and try to select the 'all layers' option from the drop down menu, it won't allow me… it's stuck on 'current layer' and I can't seem to change that… Does anyone else have the same problem? Will reinstalling the software fix it? I need to get this done by the end of the weekend… HELP!

never mind… found it! checked the channels panel and apparently I had created a quick mask… deleted it, works fine

How can I delete old email addresses from the "From" drop down menu when sending emails?

I have some old email addresses, I think may be aliases that show up in the drop down box in the "From" in email messages that I send.
They don't show up anywhere in the Preferences/Accounts panel at all.
Very perplexed at this one.

From the Mail menubar, click Window and select Previous recipients. In there you can delete old email contacts.

Can't Block Person in iChat, with task bar drop down menu in Buddies.

Similar Messages

Maybe you are looking for