Can´t boot 0x0000185 error message on windows 8.1
i have a lenovo ideapad flex 10 with win 8.1 preinstalled and with 2 usb ports only, was working on internet when suddenly my screen went black and tried to restart it and it got stock on lenovo logo, restarted again and press f8 to fix windows and i got
a message that said can´t find device 0x0000185 use system utilities or contact system admin. Need help
Hi,
The system fails to boot, in this case, I suggest to repair the system with a installation media if you have at hand in this way:
1.Insert the system repair disc into your CD or DVD drive.
2.Restart your computer using the computer's power button.
3.If prompted, press any key to start the computer from the system repair disc.
•If your computer isn't configured to start from a CD or DVD, check the information that came with your computer. You might need to change your computer's BIOS settings.
4.Choose your language settings, and then click Next.
5.Select a Automatic repair, and then click Next just as the screenshot below:
If this fails to work or you don’t have a DVD installation media, you should turn to Lenovo for support.
Regards
Wade Liu
TechNet Community Support
Similar Messages
-
Boot Manager error message on Windows 7 Toshiba Laptop
Well, I will start with what happened to it, though I don't really know. I was on the internet and it started freezing up horribly, then I didn't know what to do so I walked into the room of the house that doesn't get wireless, and gradually it unfroze. Then I went back to the other room got on again, then it just froze again, only this time walking into the next room didn't work, so I pressed the power button and shut it down. Then when I turned it back on I chose "Start Windows Normally" and I entered my password at the login screen, then it was on the screen that says "Welcome" and has the blue loading bar next to it, but I waited for at least 10 minutes and it still hadn't loaded. So, I try safe mode and all I get is a black screen with a mouse cursor, in all safe modes. Well, I decide to go to setup by pressing F2 at the Toshiba screen when you first turn it on. So, I did that and I restored the default settings, then exiting saving the settings, and then I turned it on, expecting it to work or at least have the Welcome thing. It went through the Toshiba screen, then it had a black screen for while , then I got an error message:
WINDOWS BOOT MANAGER
Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.
If you continue to recieve this error message, contact the hardware manufacturer.
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred.
So then what I did was I plugged in the charger, the mouse ( like on a desktop computer, only I stick this in my laptops usb thing) , my ipod, I put in the last cd I had in the disk drive, and I connected my computer to the modem from the other computer that I sometimes get on. It didn't do anything, it still gave me that message.
I would appreciate some help. I just got this computer in December 2009 for Christmas, and I have taken good care of it as far as I can tell. I really can't afford to replace anything right now, but if I have to I will find a way. What makes it worse is that I just got a new video game sent from my grandmother for my birthday....
Thank you for your help/thoughts/crapit looks like a corrupted windows 7 OS or hdd issue , but you might try this one
Remove all usb devices and make sure that only ac adapter is plugged in your computer.
Turn on your computer and start tapping on F8. You should see windows advanced option when you do this.
Select on Safe Mode then Enter. If you can boot to safe mode you can try doing a system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and select system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and Windows Startup Repair
=========================================================
the only easy day was yesterday.....
========================================================= -
I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."
MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."
If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report. -
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
How can i dispaly an Error Message from Server Side To form
Hi All,
How can i dispaly an Error Message from Server Side To form side .
i try several ways nothing succed.
i put the error in stack and after call the procedure from form i added
Qms$Trans_Errors.Display_Messages;
and because it is an error not informantional error the error screen displayed and enter
in infinite loop acts like flashing .
can any one help me please i use C/S Headstart6i and Designer 6i
thanks alot
radihi,
thanks alot lauri.
yr code work only using information message but in error message its still the same .
the error window still flash and enter in infinite loop of executeing the same triggers.
thanks again
radi -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred -
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
OliverHi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii -
When i try to install i tunes i get error message 7 windows error message 126
When i try to install i tunes i get error message 7 windows error message 126
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304) -
Can't save image, error message ???
Hi, I'm trying to save a pdf image in photoshop, as I always do, hitting command S, or going to file-save. I keep getting an error message saying "could not save "x" file because the file is already in use or was left open". Well duh, of course it's in use, I'm working on it.
Anybody know what's going on here? Am I missing something?
Thanks!!
EricThank you! I'll give it a try!
Date: Sun, 16 Aug 2009 15:31:32 -0600
From: [email protected]
To: [email protected]
Subject: can't save image, error message ???
happens once in a while not sure why try a save as and over write the file now make changes and do a save and see if it works.
If does not I would reset the preferences or trash the settings folder.
> -
How can we view the error message numbers in the web ui?
Dear all,
How can we view the error message numbers in the web ui? It gives the error but no number. It is possible to debug in web UI so how can we accomplish this?
Thanks,
FKHi Fakhan,
You can absolutely do that.
Check the class: CL_BSP_MESSAGES
Also if you want to find out the exact Message Class and Message Number, go to table T100, type text in field TEXT, you will get Message Class and Message number in fields ARBGB and MSGNR respectively.
I hope this helps.
THanks
Vishal
Maybe you are looking for
-
Hi.. I have a Doubt in a simple Query from the table NAST. My query is as follows:-- Select kappl objky kschl parnr parvw nacha vsztp from nast into table vit_nast where kappl = p_kappl and kschl in s_ksc
-
Mov reference file will not open in QuickTime 7.7.4 for Windows
Hi, I have a mov reference file which opened fine in QuickTime 7.6.2 but since upgrading to 7.7.4 the file will no open. I get the following error: Error -2002: a bad public movie atom was found in the movie. The file contains one PAL MPEG2 video tra
-
Is the IMPORTNODE procedure implemented in the PL/SQL 9.2.0.4.0 XDK? Does it work?
I need to "merge" or "combine" two XML documents using the PL/SQL APIs. Are the importNode or adoptNode procedures exposed in the PL/SQL 9.2.0.4.0 XDK? Before upgrading my XDK from 9.0.1.2.0 to 9.2.0.4.0, I want to know if Bug#1923262 has been fixed.
-
Webform Page dropdown box search functionality
All, We are on Planning 11.1.2.2.303. Since we have a page dimension with over 1000 members (and the member names are a name followed by 19 numbers in length), the business owner really likes the "Like" search of the page dropdown in the webform
-
Hello all, I've find this explanation about how could put the Sqlplus in linux to work: But someone could give me more detailed explanations abiut how I must set this? Thanks in advance, Eduardo Sometimes when SQL*Plus is run, you see the error: Mess