Can't boot 250 Server w/Solaris10 free download
Hi, very new to Sun/Solaris. Attempting to fresh install Solaris 10 on Sun 250 Server. Downloaded all 4 .iso images from Sun website, extracted files, and burned to CD. From OpenBoot, here is message:
(### commented comments are my own ###)
# here I am starting server w/CD in drive:
#<Sun banner>
Boot device: disk File and args:
The file just loaded does not appear to be executable.
#seconds later, here I am booting
#from command line:
ok boot cdrom
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
Bad magic number in disk label
Can't open disk label package
Can't open boot device
ok
#end of OpenBoot messages
So, the machine appears to begin boot, but fails. I have examined the files at CD root level. They are:
SOLARIS_10 (a directory)
.CTTOC
.INSTALL_CONFIG
.SLICEMAPFILE
_VOLUME.INF
COPYRIGHT
JDS_THIRDPARTYLICENSEREADME
Being new to Sun, I'm guessing that the file named .INSTALL_CONFIG might be the boot file? But this file is 100% empty. I have downloaded the disc 01 .iso file twice from the Sun website, same thing each time.
Any help graciously appreciated. My goal is to get the server booted & running on Solaris 10.
If nothing else, if I just knew the name/location of the boot file(s), I might be able to figure things out.
Thank you!
Yes, I've successfully burned many sparc bootable solaris install cdroms with cdrw on both sparc and x64/x86 solaris. Assuming the image download isn't corrupted there probably is nothing wrong with your host.
We only release floppys for x64/86 installs. You can also setup jumpstart or JET on another host and net boot the e250.
Having the ISO image you can burn a bootable Sparc CD
with any program that is able to burn ISO images to
CD.That's not completely correct. You can only use a burning program that doesn't care about the size of the cdrom and just lays down the iso. The sparc bootable image is larger than a standard burnable size because of the added boot image layed out in the vtoc. I've used cdrw -C -i filename. The -C option allows the burning program to ignore the file size limits and use the raw iso. Google for "vtoc bootable cdrom site:www.sun.com" and look at the blueprints and whitepaper pdfs for more information on how to build a bootable cdrom image.
Last night I created a Sparc bootable cdrom from Nero 6.3.0.
Open Nero,
Get to the "burn iso to disk"
After selecting the iso open the configuration icon
Select the General Tab
Uncheck the following:
Check for correct disc format before burning
Check joliet filenames before burning
Select Expert Features tab
Check:
X Enable overburn Disc-at-once burning (read the notes below)
82min 0 sec 0 frmMine was set to 82 minutes by default.
A word of caution, if you create you're own isos and if you don't re-enable these settings to what they were, you may burn bad cdroms.
I put the disk in a solaris host, with volume managment running it mounted an Solaris 10 u1 Sparc as the following:
/cdrom/sol_10_106_sparc/s6 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s6 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0007 on Tue Mar 7
09:07:03 2006
/cdrom/sol_10_106_sparc/s5 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s5 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0006 on Tue Mar 7
09:07:04 2006
/cdrom/sol_10_106_sparc/s4 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s4 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0005 on Tue Mar 7
09:07:04 2006
/cdrom/sol_10_106_sparc/s3 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s3 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0004 on Tue Mar 7
09:07:04 2006
/cdrom/sol_10_106_sparc/s2 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s2 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0003 on Tue Mar 7
09:07:04 2006
/cdrom/sol_10_106_sparc/s1 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s1 read only/
nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0002 on Tue Mar 7
09:07:04 2006
/cdrom/sol_10_106_sparc/s0 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s0 read only/
nosetuid/nodevices/noglobal/maplcase/rr/traildot/dev=16c0001 on Tue Mar 7 09:07
:05 2006Running df -k | grep cdrom returns
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s6 31 2 26 8% /cdrom
/sol_10_106_sparc/s6
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s5 31 2 26 8% /cdrom
/sol_10_106_sparc/s5
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s4 31 2 26 8% /cdrom
/sol_10_106_sparc/s4
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s3 31 2 26 8% /cdrom
/sol_10_106_sparc/s3
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s2 31 2 26 8% /cdrom
/sol_10_106_sparc/s2
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s1 396495 377328 0 100% /cdrom
/sol_10_106_sparc/s1
/vol/dev/dsk/c1t2d0/sol_10_106_sparc/s0 252034 252034 0 100% /cdrom
/sol_10_106_sparc/s0I was able to boot from this cdrom.
Cheers,
~~sa
Similar Messages
-
Where can i find in d web d free downloadable freehand 8 techniques and tutorials?
hi to all,
Pls. help me, I'm a novice in this software but I'm willing
to learn it as fast as I can because I need it to my project. Is
anybody can give me an exact link for free downloadable or sample
technique/tutorial for freehand 8.
Please help me.
many thanks an advance
normzThe bible :
http://www.freehandsource.com/ -
Can't boot ap Server, in TUXEDO ver 8.0
Hi
We have tested the ap server(XA), in tuxedo 7.1 and the result is OK.
But we have tested the same ap server(XA), in tuxedo 8.0(tuxedo patch not
applied).
However, the following error is occurred in ulog.
ulog's output
165244.uclick!TEST2.13734.1.0: 05-30-2002: Tuxedo Version 8.0
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:525: INFO: Default tpsvrinit()
function used
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:6205: WARN: Server initialization
function did not call tx_open() or tpopen() or this call failed
Why did it occur, in tuxedo 8.0 ?
Please tell me about it.
Thanks in advance.
Best Regards.It seems you may be hitting a bug that is already fixed in Tuxedo 8 rolling
patch. Apply rolling patch 34 or above and see if problem goes away.
-Deepak
"°í°æÇÐ" wrote:
Hi
We have tested the ap server(XA), in tuxedo 7.1 and the result is OK.
But we have tested the same ap server(XA), in tuxedo 8.0(tuxedo patch not
applied).
However, the following error is occurred in ulog.
ulog's output
165244.uclick!TEST2.13734.1.0: 05-30-2002: Tuxedo Version 8.0
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:525: INFO: Default tpsvrinit()
function used
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:6205: WARN: Server initialization
function did not call tx_open() or tpopen() or this call failed
Why did it occur, in tuxedo 8.0 ?
Please tell me about it.
Thanks in advance.
Best Regards. -
7.0.3 safari.....always can't find the server....downloading files doesn't come too handy!!!!
is there a way to fix this problem? it so frustrating.....i love safari browser.......from viewing clips on you tube,downloading,searching is not that easy anymore...watching clip an error occured.....downloading it takes a minute then....expands to hours and even days!!!! then it will stops...if you resume same results.....searching always cant find the site or server.....takes too long to load a server...alaways on a gray....can anyone has a solution to this problem....hope apple has a way for this...and im not the only one got this type of issue......hope apple respond...tnx!!!!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can the Adobe Update Server be used to automatically download and install updates?
Can the Adobe Update Server be used to download and install updates to Creative Cloud apps automatically without admin or user intervention?
I've noticed there is a Adobe Remote Update Manager, but I would rather all the updates and installs happen in the background.Hi Nicholas,
Please check the link given:- https://helpx.adobe.com/creative-cloud/packager/using-remote-update-manager.html
Let me know in case you require more detail on the topic.
Sarika Behal -
I have a powerbook g4 i want to upgrade to leopard where can i get the free download from ?
i would like to know where to get a free download of leopard for my powerbook g4 can someone help thank you
There is no free download of Leopard. Any offered on the internet are illegal pirated copies; reports here from people who tried them indicate that either they don't work or come with malware and misery.
We don't know where you are located but, if in the US, you can phone the Apple Store at 1-800-MY-APPLE and ask for an operating system specialists. Ask if they have copies. Some people--not all--have been able to get 10.5 that way at a modest cost.
If they say no, you must buy it on the open market and some people are selling vaild and proper Leopard install disk sets for as much as many G4 PowerBooks are worth on the used market. -
Wanna use boot camp and have 19gb free. Assistant tells me I can't since I need to have at least 10gb free. Anyone knows what's happening? tks a lot!
You need to free up disk space before creating a Windows partition. To see how much free space there is on the startup disk, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides
http://manuals.info.apple.com/en/boot_camp_install-setup.pdf
Boot Camp 3.0, Mac OS X 10.6: Frequently asked questions -
Mavericks can only boot in safe mode
In can only boot my Imac 27' (end of 2009) in safe mode.
The problem started in Lion, when the computer suddenly froze.
I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
Even with all this, I can only start in safe mode.
Here is a copy of the log. If anyone can help, I would be grateful !
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
03.05.14 11:48:37.000 kernel[0]: 2.300782: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
03.05.14 11:48:37.000 kernel[0]: init
03.05.14 11:48:37.000 kernel[0]: probe
03.05.14 11:48:37.000 kernel[0]: start
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (502 27 1097)
03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
03.05.14 11:48:37.642 kdc[78]: label: default
03.05.14 11:48:37.642 kdc[78]: dbname: od:/Local/Default
03.05.14 11:48:37.642 kdc[78]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:37.642 kdc[78]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
03.05.14 11:48:43.092 configd[56]: network changed.
03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
03.05.14 11:48:46.813 digest-service[67]: label: default
03.05.14 11:48:46.813 digest-service[67]: dbname: od:/Local/Default
03.05.14 11:48:46.813 digest-service[67]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:46.814 digest-service[67]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
03.05.14 11:48:50.554 configd[56]: network changed: DNS*
03.05.14 11:48:50.556 configd[56]: network changed: DNS*
03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
03.05.14 11:48:50.561 mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
03.05.14 11:48:51.199 kdc[78]: KDC started
03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume. destroying old logs. (157 8 1095)
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume. destroying old logs. (155 10 1095)
03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
03.05.14 11:51:07.187 distnoted[172]: # distnote server agent absolute time: 177.064182367 civil time: Sat May 3 11:51:07 2014 pid: 172 uid: 502 root: no
03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
I am posting the latest system log (on this one, I forgot to unplug the printer)
Please help !!!
May 4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:45 --- last message repeated 6 times ---
May 4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
May 4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
May 4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
May 4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
May 4 20:38:44 localhost kernel[0]: zone leak detection enabled
May 4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
May 4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
May 4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
May 4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
May 4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
May 4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
May 4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
May 4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
May 4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
May 4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
May 4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
May 4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
May 4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
May 4 20:38:44 localhost kernel[0]: USBF: 1.518 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
May 4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
May 4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
May 4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
May 4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
May 4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
May 4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
May 4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
May 4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
May 4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
May 4 20:38:44 localhost kernel[0]: 2.261691: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
May 4 20:38:44 localhost kernel[0]: USBF: 4.521 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 5.362 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 8.760 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 9.587 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
May 4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
May 4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
May 4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
May 4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
May 4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
May 4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
May 4 20:38:45 localhost distnoted[65]: # distnote server daemon absolute time: 28.917725827 civil time: Sun May 4 20:38:33 2014 pid: 65 uid: 0 root: yes
May 4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
May 4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
May 4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
May 4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
May 4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
May 4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
May 4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
May 4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
May 4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: init
May 4 20:38:49 localhost kernel[0]: probe
May 4 20:38:49 localhost kernel[0]: start
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
May 4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
May 4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: DSMOS has arrived
May 4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
May 4 20:38:51 localhost kdc[79]: label: default
May 4 20:38:51 localhost kdc[79]: dbname: od:/Local/Default
May 4 20:38:51 localhost kdc[79]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:51 localhost kdc[79]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost digest-service[66]: label: default
May 4 20:38:52 localhost digest-service[66]: dbname: od:/Local/Default
May 4 20:38:52 localhost digest-service[66]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:52 localhost digest-service[66]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
May 4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
May 4 20:38:52 localhost configd[55]: network changed.
May 4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
May 4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
May 4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
May 4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
May 4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
May 4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
May 4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
May 4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
May 4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
May 4 20:38:58 --- last message repeated 1 time ---
May 4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
May 4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
May 4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
May 4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
May 4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
May 4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
May 4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
May 4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
May 4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
May 4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
May 4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
May 4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
May 4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
"00-22-41-ce-73-b2",
"7c-d1-c3-bc-ed-9b",
"04-f1-3e-e9-76-f5",
"d4-88-90-f0-2d-96",
"90-27-e4-f2-fd-53"
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
May 4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
May 4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
May 4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
May 4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
May 4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
May 4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
May 4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
May 4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
May 4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
May 4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
May 4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
May 4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
May 4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
May 4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
May 4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
May 4 20:39:43 --- last message repeated 1 time ---
May 4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
May 4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
May 4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load
May 4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load
May 4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
May 4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent absolute time: 252.755084619 civil time: Sun May 4 20:42:17 2014 pid: 161 uid: 502 root: no
May 4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
May 4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent absolute time: 272.385323107 civil time: Sun May 4 20:42:37 2014 pid: 169 uid: 89 root: no
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
May 4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
May 4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0 -
Dual boot Windows Server 2008 R2 and RHEL 7 Server?
Do someone know how can I setup dual boot of Windows Server 2008 R2 and RHEL 7 Server?
I've tried to install Windows first, then shrink, then install RHEL there.
But GRUB2 loader doesn't offer to start Windows, only Linux in the menu. (probably Windows partition need to be added to grub2 somehow)Hi Oleg Vazhnev,
Please refer to following article and check if can help you.
How
to add Vista/Windows 7 partition to Grub 2 (Ubuntu 9.10, Karmic Koala)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, please also refer to following video and check if can provide you more details of installation.
Install RHEL 7 in Legacy Mode (Dual Boot Windows Server
2008 R2)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
HELP... after 10.4.11 update I can't boot past the blue screen
HELP... after 10.4.11 update I can't boot past the blue screen, and it is pretty frustrating, to say the least. Here's what happened last night:
I installed elgato's eyetv 250, and at the end it asked to update the software. I did so, and when I tried to run it again it said I had to be running 10.4.11. I quickly went over and downloaded the 10.4.11 combo updater to my desktop and proceeded to repair permissions on my disk so I could run the updater.
I repaired permissions and started the updater. It got halfway through updating and said something like it could not finish and stopped. No reason why - it just stopped. I tried it again, and it did the same thing after going about 25 to 30 percent through the updating process. I thought that was very odd, so I checked, and I was running 10.4.9.
I thought I needed to get the 10.4.10 update, so I downloaded the combo updater several times. It would not run, giving me some error message that it would not even open, so I thought I needed to restart my computer to get it to run. I did so.
That's when my computer would not boot. It gets through the initial white screen with the logo in the middle and the revolving circle, and while it stays there for a long time the fans run increasingly faster. They tame down, and then the blue screen with "Mac OS" on it and the blue progress bar comes up. There is no blue progress bar, though... that's where it stops and will not go any further.
Can ANYBODY help me get this thing booted back up? It was so late last night that before I started I didn't back the Mac up, and of course I have a project on there that I need to finish Saturday afternoon for a company.
ANY HELP WILL BE SO GLADLY APPRECIATED. If you can give me step by step instructions on what to do, you will surely be blessed! Thanks for any help,
Barry
Jeremiah 29:11Hi mrstang, and a warm welcome to the forums!
It sounds like Disk Directory problems.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings. -
Safari can't connect to server problem (just one website)
After I upgraded my mac about a week ago, I can't open a particular website using my home wifi (Safari can't connect to server) It lets me open page but one, which happens to be my mail website. However, when I use a public wifi, I can open that website without any problem. Any ideas why this happens?
Linc.
I have been unable to connect to specific random favorite sites and tried your posts suggestion
"Boot into Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, reboot as usual and post the results."
I was able to connect to all my unavailable sites. Can you help me discover what is preventing my access when not in Recovery mode. I Made the Safari preferences match the recovery mode Safari preferences so that doesn't seem to be the problem.
I ran EtreCheck
These are the results
Hardware Information:
MacBook Pro (Retina, 13-inch, Late 2012)
MacBook Pro - model: MacBookPro10,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:17:15
Disk Information:
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
HD (disk0s2) /: 120.47 GB (24.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
Launch Agents:
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
User Login Items:
LaunchBar
iClipboard
iTeleport Connect
3rd Party Preference Panes:
Flash Player
iClipboard
Internet Plug-ins:
AdobePDFViewer.plugin
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Google Earth Web Plug-in.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
VLC Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
HD: Disk size: 120.47 GB Disk used: 95.63 GB
Destinations:
Ext [Local] (Last used)
Total size: 249.72 GB
Total number of backups: 1
Oldest backup: 2013-10-25 06:42:38 +0000
Last backup: 2013-10-25 06:42:38 +0000
Size of backup disk: Too small
Backup size 249.72 GB < (Disk used 95.63 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% MenuTab for Facebook
3% WindowServer
2% EtreCheck
1% fontd
0% iClipboard
0% loginwindow
0% Safari
0% warmd
0% coreservicesd
0% aosnotifyd
Top Processes by Memory:
360 MB mDNSResponder
156 MB Dock
131 MB com.apple.IconServicesAgent
131 MB Safari
106 MB MenuTab for Facebook
90 MB WindowServer
57 MB Finder
57 MB CalendarAgent
57 MB LaunchBar
57 MB com.apple.WebKit.WebContent
Virtual Memory Statistics:
4.35 GB Free RAM
2.39 GB Active RAM
358 MB Inactive RAM
924 MB Wired RAM
342 MB Page-ins
0 B Page-outs -
How can i access dmz server via public ip from inside?
hi all !
As shown in Figure，how can i access the server in dmz zone via public？
i can access it via private ip 192.168.1.1 now,but i can't access it via 101.100.1.2.
who can help me ?
thank you !Hi,
You would have to configure Static NAT from DMZ to INSIDE for the server in the same way you have done for DMZ to OUTSIDE.
Basically in the following way for example
object network DMZ-WEB
host 192.168.1.1
nat (dmz,inside) static 101.100.1.2
This would enable your users on the "inside" to access the "dmz" server with the public IP address. And naturally only with the public IP address after this NAT.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni -
Mac Mini (2011) can't boot, no screen display.
Hi, my mac mini (2011) finally won't startup today.
It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
- when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
- after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
- I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
- I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
- I also tried to unplug the memory, try with every single one to boot, no luck
- last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
- during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
- the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
wish you all have a good day.Hard to troubleshoot when you can't turn on the computer on any more. One option is to bring it to an Apple store to have them look at it. They will tell you what is wrong and how much it will cost to fix. I have never heard of them charging for a diagnostic and an estimate.
If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried. The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it. I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming. -
Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.
Try this as a first step;<BR><BR>
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
and<BR><BR>
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''. -
Can't find the server for a site, multiple browsers, multiple computers
In recent weeks, possibly coinciding with updates in Firefox (running 3.6.10), Safari (5.0.2) and iTunes (10.0.1), I have only received the prompt, "can't find server" when attempting to connect to the site kcrw.com. Others can get it on their computers in other places, and my iPhone can access when on 3G, but our network here seems affected because all the computers [All macs, some laptops and some desktops, running on OS 10.5.8] here receive this message. I used to be able to go to this site, a radio station, and stream audio or download podcasts. My ISP ran a ping test to the site's server and said that went through, but the browsers and iTunes don't seem to be able to make the transformation to anything I can read. What kind of a problem is this? Apple care was no help either.
HI Alice,
From your Safari menu bar click Safari / Preferences then select the Advanced tab. Now click: Change Settings. That will prompted your System Preferences / Network pane. Make sure the Proxies tab is selected.
If any of the boxes are checked under: Select a protocol to configure.
That could be a factor. If there are, deselect, then click the OK button.
Quit Safari. Relaunch Safari and see if that made a difference.
If it's not a proxy issue, go to a website. If you see the "can't find the server" try reloading the page.
Command + R
Also, try Open DNS - Free / Basic . Includes anti phishing filters.
And help here to manually add DNS. Topic : Manually provided DNS server addresses are higher priority than DHCP's
Carolyn
Maybe you are looking for
-
Web App Security Firewall Using Catalyst 6500 w/ CSM
We are evaluating web application security firewalls. The other products can recognize application level attacks such as SQL insertion and deranged parameters. Some of my colleagues believe that the CSM (which we already have deployed) has these sort
-
I have conneted via WiFi to my Sony TV but do not know how to send pictures etc to the TV
How do I send items to TV after connecting via WiFi
-
JSP mapping with Tomcat 5.0.27
With Jakarta-Tomcat 5.0.27 is it possible to put a JSP file in a sub-directory of a web application and be able to "servlet-mapping" it to only create one object? If so how do you write the web.xml entry? I only want to create one InitTest object, no
-
Images have question mark e-mail and web pages
Why are half of all images not there,replaced with blue box with question marks. Anything on line , like emails ,web sights. No rime or reason. Please help me out. I am new with apple, not computers.... Thank You, kimbr
-
Calling script from ALV report
there is button in my report(print) when click on this it needs to display the report output in a script (which is designed for this) Please help me how to declare my itab variables in Script.... only the data and page number will change rest all tex