Can't boot ap Server, in TUXEDO ver 8.0

Hi
We have tested the ap server(XA), in tuxedo 7.1 and the result is OK.
But we have tested the same ap server(XA), in tuxedo 8.0(tuxedo patch not
applied).
However, the following error is occurred in ulog.
ulog's output
165244.uclick!TEST2.13734.1.0: 05-30-2002: Tuxedo Version 8.0
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:525: INFO: Default tpsvrinit()
function used
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:6205: WARN: Server initialization
function did not call tx_open() or tpopen() or this call failed
Why did it occur, in tuxedo 8.0 ?
Please tell me about it.
Thanks in advance.
Best Regards.

It seems you may be hitting a bug that is already fixed in Tuxedo 8 rolling
patch. Apply rolling patch 34 or above and see if problem goes away.
-Deepak
"°í°æÇÐ" wrote:
Hi
We have tested the ap server(XA), in tuxedo 7.1 and the result is OK.
But we have tested the same ap server(XA), in tuxedo 8.0(tuxedo patch not
applied).
However, the following error is occurred in ulog.
ulog's output
165244.uclick!TEST2.13734.1.0: 05-30-2002: Tuxedo Version 8.0
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:525: INFO: Default tpsvrinit()
function used
165244.uclick!TEST2.13734.1.0: LIBTUX_CAT:6205: WARN: Server initialization
function did not call tx_open() or tpopen() or this call failed
Why did it occur, in tuxedo 8.0 ?
Please tell me about it.
Thanks in advance.
Best Regards.

Similar Messages

  • Can't boot 250 Server w/Solaris10 free download

    Hi, very new to Sun/Solaris. Attempting to fresh install Solaris 10 on Sun 250 Server. Downloaded all 4 .iso images from Sun website, extracted files, and burned to CD. From OpenBoot, here is message:
    (### commented comments are my own ###)
    # here I am starting server w/CD in drive:
    #<Sun banner>
    Boot device: disk File and args:
    The file just loaded does not appear to be executable.
    #seconds later, here I am booting
    #from command line:
    ok boot cdrom
    Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
    Bad magic number in disk label
    Can't open disk label package
    Can't open boot device
    ok
    #end of OpenBoot messages
    So, the machine appears to begin boot, but fails. I have examined the files at CD root level. They are:
    SOLARIS_10 (a directory)
    .CTTOC
    .INSTALL_CONFIG
    .SLICEMAPFILE
    _VOLUME.INF
    COPYRIGHT
    JDS_THIRDPARTYLICENSEREADME
    Being new to Sun, I'm guessing that the file named .INSTALL_CONFIG might be the boot file? But this file is 100% empty. I have downloaded the disc 01 .iso file twice from the Sun website, same thing each time.
    Any help graciously appreciated. My goal is to get the server booted & running on Solaris 10.
    If nothing else, if I just knew the name/location of the boot file(s), I might be able to figure things out.
    Thank you!

    Yes, I've successfully burned many sparc bootable solaris install cdroms with cdrw on both sparc and x64/x86 solaris. Assuming the image download isn't corrupted there probably is nothing wrong with your host.
    We only release floppys for x64/86 installs. You can also setup jumpstart or JET on another host and net boot the e250.
    Having the ISO image you can burn a bootable Sparc CD
    with any program that is able to burn ISO images to
    CD.That's not completely correct. You can only use a burning program that doesn't care about the size of the cdrom and just lays down the iso. The sparc bootable image is larger than a standard burnable size because of the added boot image layed out in the vtoc. I've used cdrw -C -i filename. The -C option allows the burning program to ignore the file size limits and use the raw iso. Google for "vtoc bootable cdrom site:www.sun.com" and look at the blueprints and whitepaper pdfs for more information on how to build a bootable cdrom image.
    Last night I created a Sparc bootable cdrom from Nero 6.3.0.
    Open Nero,
    Get to the "burn iso to disk"
    After selecting the iso open the configuration icon
            Select the General Tab
    Uncheck the following:
                    Check for correct disc format before burning
                    Check joliet filenames before burning
            Select Expert Features tab
    Check:
                   X Enable overburn Disc-at-once burning (read the notes below)
                    82min 0 sec 0 frmMine was set to 82 minutes by default.
    A word of caution, if you create you're own isos and if you don't re-enable these settings to what they were, you may burn bad cdroms.
    I put the disk in a solaris host, with volume managment running it mounted an Solaris 10 u1 Sparc as the following:
    /cdrom/sol_10_106_sparc/s6 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s6 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0007 on Tue Mar  7
    09:07:03 2006
    /cdrom/sol_10_106_sparc/s5 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s5 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0006 on Tue Mar  7
    09:07:04 2006
    /cdrom/sol_10_106_sparc/s4 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s4 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0005 on Tue Mar  7
    09:07:04 2006
    /cdrom/sol_10_106_sparc/s3 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s3 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0004 on Tue Mar  7
    09:07:04 2006
    /cdrom/sol_10_106_sparc/s2 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s2 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0003 on Tue Mar  7
    09:07:04 2006
    /cdrom/sol_10_106_sparc/s1 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s1 read only/
    nosetuid/nodevices/intr/largefiles/xattr/onerror=panic/dev=16c0002 on Tue Mar  7
    09:07:04 2006
    /cdrom/sol_10_106_sparc/s0 on /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s0 read only/
    nosetuid/nodevices/noglobal/maplcase/rr/traildot/dev=16c0001 on Tue Mar  7 09:07
    :05 2006Running df -k | grep cdrom returns
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s6      31       2      26     8%    /cdrom
    /sol_10_106_sparc/s6
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s5      31       2      26     8%    /cdrom
    /sol_10_106_sparc/s5
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s4      31       2      26     8%    /cdrom
    /sol_10_106_sparc/s4
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s3      31       2      26     8%    /cdrom
    /sol_10_106_sparc/s3
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s2      31       2      26     8%    /cdrom
    /sol_10_106_sparc/s2
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s1  396495  377328       0   100%    /cdrom
    /sol_10_106_sparc/s1
    /vol/dev/dsk/c1t2d0/sol_10_106_sparc/s0  252034  252034       0   100%    /cdrom
    /sol_10_106_sparc/s0I was able to boot from this cdrom.
    Cheers,
    ~~sa

  • User weblogic is not permitted to boot the server

    Hi,
    I am new to OES and after running the configtool, creating the ASIAuthorizationProvider and ASIRoleMapperProvider (both has Defaul Identity Directory: wls_dir and Application Deployment Parent: //app/policy/wls_app), binding the SSM, i get this error when starting the WLS admin server:
    15:33:26.312 EVENT Starting Jetty/4.2.25
    15:33:26.859 WARN!! Delete existing temp dir C:\BEA_HOME_10\ales32-ssm\wls-ssm\i
    nstance\wls_ssm\work\jar_temp\Jetty__8000__ for WebApplicationContext[/,jar:file
    :/C:/BEA_HOME_10/ales32-ssm/wls-ssm/webapp/arme.war!/]
    15:33:30.515 EVENT Started WebApplicationContext[,ARMEService]
    15:33:32.562 EVENT Started SocketListener on 0.0.0.0:8000
    15:33:32.562 EVENT Started org.mortbay.jetty.Server@176bf9e
    ARME is started now
    <Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <BEA-090082> <Security initiali
    zing using security realm wls.>
    <Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <BEA-090404> <User weblogic i
    s not permitted to boot the server; The server policy may have changed in such a
    way that the user is no longer able to boot the server.Reboot the server with t
    he administrative user account or contact the system administrator to update the
    server policy definitions.>
    <Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <BEA-000386> <Server su
    bsystem failed. Reason: weblogic.security.SecurityInitializationException: User
    weblogic is not permitted to boot the server; The server policy may have changed
    in such a way that the user is no longer able to boot the server.Reboot the ser
    ver with the administrative user account or contact the system administrator to
    update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitte
    d to boot the server; The server policy may have changed in such a way that the
    user is no longer able to boot the server.Reboot the server with the administrat
    ive user account or contact the system administrator to update the server policy
    definitions.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
    BootAuthorization(Unknown Source)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
    itialize(Unknown Source)
    at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
    ource)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    >
    <Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to FAILED>
    <Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <BEA-000383> <A critical s
    ervice failed. The server will shut itself down>
    <Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to FORCE_SHUTTING_DOWN>
    Stopping PointBase server...
    PointBase server stopped.
    from the WLS AdminServer.log:
    ####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000436> <Allocating 3 reader threads.>
    ####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000446> <Native IO Enabled.>
    ####<Mar 5, 2010 3:33:06 PM SGT> <Info> <IIOP> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774386531> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 5, 2010 3:33:11 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774391656> <BEA-000000> <Starting OpenJPA 1.0.0.1>
    ####<Mar 5, 2010 3:33:17 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774397171> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413421> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413500> <BEA-090663> <The DeployableRoleMapper "com.bea.security.providers.authorization.asi.RoleProviderStub" implements the deprecated DeployableRoleProvider interface.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413531> <BEA-090662> <The DeployableAuthorizer "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" implements the deprecated DeployableAuthorizationProvider interface.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm wls.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090082> <Security initializing using security realm wls.>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774414234> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414234> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
         at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    >
    ####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FAILED>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Info> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414359> <BEA-000236> <Stopping execute threads.>
    also, i just noticed that when staring OES admin server i get the following from the logs:
    system_console.log:
    2010-03-05 15:19:04,218 [JettySSLListener1-1] ERROR com.wles.soap.BLM.BlmBindingImpl - getUndistributedAttributeChanges has not been implemented properly.
    2010-03-05 15:27:17,656 [Thread-31] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
    Communication Error:; nested exception is:
         javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme group '//bind/wls' error report, policyno = 52:
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme 'asi.null.ARME.wls_ssm.asi.SGBLM010':
    2010-03-05 15:27:33,015 [Thread-32] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:33,015 [Thread-32] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
    Communication Error:; nested exception is:
         javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    WLESWebLogic.wrapper.log:
    INFO | jvm 1 | 2010/03/05 15:27:17 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    INFO | jvm 1 | 2010/03/05 15:27:17 | Re-throwing the fault...
    INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: Client has closed the connection, error not reported to client.
    INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: The exception is: com.bea.wles.management.console.utils.NestedJspException: Connection reset by peer: socket write error
    INFO | jvm 1 | 2010/03/05 15:27:33 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    INFO | jvm 1 | 2010/03/05 15:27:33 | Re-throwing the fault...
    although, it seems that the OES admin server is up since i am able to access the OES admin console.
    i have tried playing around the policies to grant the "weblogic" the priviliges for an Admin but is still get the same issue. Although, when i try to distribute the changes in the policy, "ASI ( Policy for entire Oracle Entitlements Server system ) " still appears in the list of changes.
    any thoughts on what the problem is? is there a way to force the distribution of the policy? maybe through the command prompt or other console?
    Edited by: user9056644 on Mar 5, 2010 12:02 AM

    Have you applied CP2 or CP3 to OES? There were enhancements that allows these policies to be scoped within an organization. I only ask to help guide you on distributing policies for the runtime WLS domain. The ASI domain is only for the admin. There should have been a set of resources and policies created as a result of running ConfigTool for your new instance (looks like you named it 'wls'). If no CP, it will be in DefaultApp next to ASI.
    You have to distribute policies for 'wls' immediately following running ConfigTool before starting WebLogic or you will put it into a state where it can't be started. The corrective action is to remove the state.ck file under C:\BEA_HOME_10/ales32-ssm/wls-ssm/instance/wls_ssm/work/runtime, distribute policies, restart WebLogic.
    If you need to re-run ConfigTool (after installing CP for instance), revert the following files:
    <domain>/config/config.xml
    <domain>/bin/startWebLogic.sh | .cmd
    Revert from the no-ales backups created. Remove the instance folder under C:\BEA_HOME_10\ales32-ssm/wls-ssm/instance. You can then re-run ConfigTool if you have to.

  • Issue in booting app server.

    I have installed tuxedo 8.1 on windows 2003 on PT 8.48.16 .
    Whenver I am trying to boot app server I m getting below error message .
    I had tried all the possible solution given on support site, but no luck.
    Beside that , I also get a pop-up image which say " an unhandeled win32 exception occured in tmadmin.exe[3004] "
    Can you please give advice on it.
    ==========
    Error :-
    073656.DCB-STG-APP3!tmloadcf.4048.1592.-2: 04-24-2012: Tuxedo Version 8.1, 32-bit
    073656.DCB-STG-APP3!tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1120 512-byte blocks)
    073658.DCB-STG-APP3!tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file E:\psoft\PT848\appserv\CRPROD\PSTUXCFG has been created
    073705.DCB-STG-APP3!PSADMIN.3964: Begin attempt on domain CRPROD
    073717.DCB-STG-APP3!tmboot.3744.864.-2: 04-24-2012: Tuxedo Version 8.1, 32-bit
    073717.DCB-STG-APP3!tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
    073717.DCB-STG-APP3!tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
    073717.DCB-STG-APP3!PSADMIN.3964: End boot attempt on domain CRPROD

    Did you also try the solution BobLilly gave, connecting to the server in Console mode?
    Are you connecting to the appserver machine via Remote Desktop or is it running locally?
    See also this doc on why terminal server and psadmin conflict.
    E-AS: LIBTUX_CAT:681: ERROR: Failure to create message queue with psadmin Using Remote Desktop when Connecting to Windows Servers [ID 658213.1]
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=658213.1
    And this doc with several solutions for this issue
    E-TUX: LIBTUX_CAT: 681/1098 - Failure to create message queue / Cannot Create Queue [ID 607729.1]
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=607729.1

  • Install PeopleTools 8.53 with Linux Issue: Boot Application Server Domain PT853 using psadmin

    Folks,
    Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5.
    I confront the issue regarding booting Application Server Domain PT853 while Database Server is listening as below:
    [user@userlinux PT8.53]$ . ./psconfig.sh
    [user@userlinux appserv]$ export SYSTEM_PASS=SYS/SYS
    [user@userlinux appserv]$ export ORACLE_HOME=/home/user/OracleDB_Home
    [user@userlinux appserv]$ export  ORACLE_SID=PT853
    [user@userlinux appserv]$ export TUXDIR=/home/user/Oracle/Middleware/tuxedo11gR1
    [user@userlinux appserv]$ export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH
    [user@userlinux appserv]$ export PATH=$TUXDIR/bin:$PATH
    [user@userlinux appserv]$ ./psadmin
    Its output gets 2 errors in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG as below:
    First, GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
    Second, GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
    I create a symlink in /home/user/OracleDB_Home/lib and /lib32 as below:
    [user@userlinux lib]$ ln -s libclntsh.so.11.1 libclntsh.so.8.0
    [user@userlinux lib32]$ ln -s libclntsh.so.11.1 libclntsh.so.8.0
    After that, I run ./psadmin to boot the domain PT853 again, I see the first error is solved. Now, there is only one error in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0924.LOG is below:
    GenMessageBox(0, 0, M): Database Signon: Invalid user ID or password for database signon. (id=MyOwnerName)
    Server failed to start
    I have changed UserId as PSADMIN in Configuration file, purge cache and clean IPC resources and reboot. Password is correct. But the error always indicates id=MyOwnerName.
    Application Designer login as PSADMIN successfully. Data Mover Bootstrap login as MyOwnerName successfully.
    My question is:
    Why both PSADMIN and MyOwnerName are invalid user ID or password for database signon ? How to solve the issue ?
    Thanks.

    As stated in the installation manual there are a few prerequisites in chapter CHAPTER 8B Configuring the Application Server on UNIX page 238
    Prerequisites
    Before beginning this procedure, you should have completed the following tasks:
    Installed your application server.
              See "Using the PeopleSoft Installer," Understanding PeopleSoft Servers
    Installed Tuxedo 11gR1
         See "Installing Additional Components."
    Granted authorization to a PeopleSoft user ID to start the application server.
         The database configuration procedure includes a step for setting up the user ID with authorization to start
         the application server. See the application-specific installation instructions for information on the user IDs
         for your PeopleSoft application. See the PeopleTools: Security Administration product documentation
         for information on PeopleSoft PeopleTools delivered user profiles.
         See "Creating a Database on UNIX," Running the Database Configuration Wizard.
         See "Creating a Database Manually <on Windows or UNIX>," Creating Data Mover Import Scripts.
    Run the following SQL statements on your database server to review and if needed, update the PSCLASSDEFN table:
         SELECT CLASSID, STARTAPPSERVER FROM PSCLASSDEFN
         WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID='<OPRID>');
         UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='<CLASSID>';
    Note. Installers typically use VP1 or PS to test the application server. If these users are deleted or their
    passwords are changed, the application server will no longer be available. To avoid this problem, you can set
    up a new operator (called PSADMIN or PSASID, for instance) with privileges to start the application server.
    If you do this, you can use the new operator for your servers and you won't need to change the
    password each time VP1 or PS is changed.
    Does you user have privileges to start the applications server.
    Also pay attention to the connectid configuration in the application server. This should be the same connectid and password as you provided during the database creation script connect.sql

  • TUXEDO11 in MP mode can't boot TMS_ORA on the non-master node

    I have my Tuxedo 11 installed on Ubuntu9.10 server as the master node (SITE1) and on CentOS6.2 as the non-master node (SITE2). The client program is using WSL to communicate with the servers. Tuxedo 11 has no patch, and both Tuxedo11 and Oracle10gR2 are 32 bits running on 32 bits OS.
    On both node a TMS_ORA associated with an ORACLE 10gR2 database was installed. When I issue "tmboot -y", the servers on the master node booted normally, however, the TMS_ORA server and server that using TMS_ORA on SITE2 reported "Assume started (pipe). ". There is no core file for these servers on SITE2 and in ULOG on SITE2 there is no Error or Warning concerning the failure starting of TMS_ORA.
    In order to check my servers and TMS_ORA works OK on SITE2, I used the master command under tmadmin to first swap the master and non-master node, and after the migration is successful, on SITE2 I issued "tmshutdown -cy" command then "tmboot -y" command. Surprisingly, all the servers booted correctly on both nodes. Then I migrate the master node back to SITE1 and the servers are still there alive and my client program can successfully call these servers which means the TMS_ORA and server using TMS_ORA on both nodes works fine.
    The problem is, when I "tmshutdown -s server" (those on SITE2, either TMS_ORA or server using TMS_ORA), then using "tmboot -s server" to boot them (those on SITE2, either TMS_ORA or server using TMS_ORA) I got "Assume started (pipe). " reported and those server process didn't appear on SITE2.
    It seems that I can't boot TMS_ORA on SITE2 from the master node SITE1 but can boot all the servers correctly if SITE2 are acting as the master node. Server that don't use TMS_ORA on SITE2 can be booted successfully from SITE1.
    Can anybody figure out what's wrong? Thanks in advance.
    Best regards,
    Orlando
    Edited by: user10950876 on 2012-6-13 下午3:02
    Edited by: user10950876 on 2012-6-13 下午3:33

    Hi Todd,
    Thank you for you reply. Following is my ULOG and tmboot report:
    ubuntu9:~/tuxapp$tmboot -y
    Booting all admin and server processes in /home/xp/tuxapp/tuxconfig
    INFO: Oracle Tuxedo, Version 11.1.1.2.0, 32-bit, Patch Level (none)
    Booting admin processes ...
    exec DBBL -A :
    on SITE1 -> process id=8803 ... Started.
    exec BBL -A :
    on SITE1 -> process id=8804 ... Started.
    exec BBL -A :
    on SITE2 -> process id=3964 ... Started.
    Booting server processes ...
    exec TMS_ORA -A :
    on SITE1 -> process id=8812 ... Started.
    exec TMS_ORA -A :
    on SITE1 -> process id=8838 ... Started.
    exec TMS_ORA2 -A :
    on SITE2 -> CMDTUX_CAT:819: INFO: Process id=3967 Assume started (pipe).
    exec TMS_ORA2 -A :
    on SITE2 -> CMDTUX_CAT:819: INFO: Process id=3968 Assume started (pipe).
    exec WSL -A -- -n //128.0.88.24:5000 -m 3 -M 5 -x 5 :
    on SITE1 -> process id=8841 ... Started.
    8 processes started.
    ULOG on ubuntu9
    134547.ubuntu9!DBBL.8803.3071841984.0: 06-14-2012: client high water (0), total client (0)
    134547.ubuntu9!DBBL.8803.3071841984.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134547.ubuntu9!DBBL.8803.3071841984.0: LIBTUX_CAT:262: INFO: Standard main starting
    134549.ubuntu9!DBBL.8803.3071841984.0: CMDTUX_CAT:4350: INFO: BBL started on SITE1 - Release 11112
    134550.ubuntu9!BBL.8804.3072861888.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit, Patch Level (none)
    134550.ubuntu9!BBL.8804.3072861888.0: LIBTUX_CAT:262: INFO: Standard main starting
    134550.ubuntu9!BRIDGE.8806.3072931520.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134550.ubuntu9!BRIDGE.8806.3072931520.0: LIBTUX_CAT:262: INFO: Standard main starting
    134555.ubuntu9!DBBL.8803.3071841984.0: CMDTUX_CAT:4350: INFO: BBL started on SITE2 - Release 11112
    134556.ubuntu9!BRIDGE.8806.3072931520.0: CMDTUX_CAT:1371: INFO: Connection received from redhat62
    134557.ubuntu9!TMS_ORA.8812.3057321664.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134557.ubuntu9!TMS_ORA.8812.3057321664.0: LIBTUX_CAT:262: INFO: Standard main starting
    134559.ubuntu9!TMS_ORA.8838.3056805568.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134559.ubuntu9!TMS_ORA.8838.3056805568.0: LIBTUX_CAT:262: INFO: Standard main starting
    134559.ubuntu9!WSL.8841.3072153920.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134559.ubuntu9!WSL.8841.3072153920.0: LIBTUX_CAT:262: INFO: Standard main starting
    134559.ubuntu9!WSH.8842.3072411328.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134559.ubuntu9!WSH.8842.3072411328.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    134559.ubuntu9!WSH.8843.3073169088.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134559.ubuntu9!WSH.8843.3073169088.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    134559.ubuntu9!WSH.8844.3073066688.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134559.ubuntu9!WSH.8844.3073066688.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    ULOG on redhat62
    134615.redhat62!tmloadcf.3961.3078567616.-2: 06-14-2012: client high water (0), total client (0)
    134615.redhat62!tmloadcf.3961.3078567616.-2: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134615.redhat62!tmloadcf.3961.3078567616.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file /home/tuxedo/tuxedo/simpapp/tuxconfig has been updated
    134617.redhat62!BSBRIDGE.3963.3078089312.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134617.redhat62!BSBRIDGE.3963.3078089312.0: LIBTUX_CAT:262: INFO: Standard main starting
    134619.redhat62!BBL.3964.3079420512.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit, Patch Level (none)
    134619.redhat62!BBL.3964.3079420512.0: LIBTUX_CAT:262: INFO: Standard main starting
    134620.redhat62!BRIDGE.3965.3077868128.0: 06-14-2012: Tuxedo Version 11.1.1.2.0, 32-bit
    134620.redhat62!BRIDGE.3965.3077868128.0: LIBTUX_CAT:262: INFO: Standard main starting
    134620.redhat62!BRIDGE.3965.3077868128.0: CMDTUX_CAT:4488: INFO: Connecting to ubuntu9 at //128.0.88.24:1800
    ubb file content: (just in case you want to see it too. I've commented all the services in the ubb file, except the TMS_ORA2 on SITE2 to make it more distinct.)
    *RESOURCES
    IPCKEY 123456
    DOMAINID TUXTEST
    MASTER SITE1, SITE2
    MAXACCESSERS 50
    MAXSERVERS 35
    MAXCONV 10
    MAXGTT 20
    MAXSERVICES 70
    OPTIONS LAN, MIGRATE
    MODEL MP
    LDBAL Y
    *MACHINES
    DEFAULT: MAXWSCLIENTS=30
    ubuntu9 LMID=SITE1
    APPDIR="/home/xp/tuxapp"
    TUXCONFIG="/home/xp/tuxapp/tuxconfig"
    TUXDIR="/home/xp/tuxedo11gR1"
    TLOGDEVICE="/home/xp/tuxapp/TLOG"
    TLOGNAME="TLOG"
    TLOGSIZE=100
    TYPE=Linux
    ULOGPFX="/home/xp/tuxapp/ULOG"
    ENVFILE="/home/xp/tuxapp/ENVFILE"
    UID=1000
    GID=1000
    redhat62 LMID=SITE2
    TUXDIR="/usr/oracle/tuxedo11gR1"
    APPDIR="/home/tuxedo/tuxedo/simpapp"
    TLOGDEVICE="/home/tuxedo/tuxedo/simpapp/TLOG"
    TLOGNAME="TLOG"
    TUXCONFIG="/home/tuxedo/tuxedo/simpapp/tuxconfig"
    TYPE=Linux
    ULOGPFX="/home/tuxedo/tuxedo/simpapp/ULOG"
    ENVFILE="/home/tuxedo/tuxedo/simpapp/ENVFILE"
    UID=501
    GID=501
    *GROUPS
    BANK1
    LMID=SITE1 GRPNO=1 TMSNAME=TMS_ORA TMSCOUNT=2
    OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=120+MaxCur=5+LogDir=.+SqlNet=xpdev"
    CLOSEINFO="NONE"
    BANK2
    LMID=SITE2 GRPNO=2 TMSNAME=TMS_ORA2 TMSCOUNT=2
    OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/scott+SesTm=120+MaxCur=5+LogDir=.+SqlNet=tuxdev"
    CLOSEINFO="NONE"
    WSGRP
    LMID=SITE1 GRPNO=3
    OPENINFO=NONE
    *NETGROUPS
    DEFAULTNET NETGRPNO=0 NETPRIO=100
    SITE1_SITE2 NETGRPNO=1 NETPRIO=200
    *NETWORK
    SITE1 NETGROUP=DEFAULTNET
    NADDR="//128.0.88.24:1800"
    NLSADDR="//128.0.88.24:1500"
    SITE2 NETGROUP=DEFAULTNET
    NADDR="//128.0.88.215:1800"
    NLSADDR="//128.0.88.215:1500"
    *SERVERS
    DEFAULT:
    CLOPT="-A"
    #XFER SRVGRP=BANK1 SRVID=1
    #TLR_ORA SRVGRP=BANK1 SRVID=2
    #TLR_ORA2 SRVGRP=BANK2 SRVID=3
    WSL SRVGRP=WSGRP SRVID=4
    CLOPT="-A -- -n //128.0.88.24:5000 -m 3 -M 5 -x 5"
    *SERVICES
    #INQUIRY
    #WITHDRAW
    #DEPOSIT
    #XFER_NOXA
    #XFER_XA
    Edited by: user10950876 on 2012-6-13 下午10:58

  • Mac Mini (2011) can't boot, no screen display.

    Hi, my mac mini (2011) finally won't startup today.
    It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
    Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
    - when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
    - after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
    - I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
    - I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
    - I also tried to unplug the memory, try with every single one to boot, no luck
    - last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
    - during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
    - the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
    the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
    wish you all have a good day.

    Hard to troubleshoot when you can't turn on the computer on any more.  One option is to bring it to an Apple store to have them look at it.  They will tell you what is wrong and how much it will cost to fix.  I have never heard of them charging for a diagnostic and an estimate.
    If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried.  The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
    If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it.  I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

  • Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

    Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

    Try this as a first step;<BR><BR>
    Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
    and<BR><BR>
    Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    While you are in safe mode;
    '''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

  • Mavericks can only boot in safe mode

    In can only boot my Imac 27' (end of 2009) in safe mode.
    The problem started in Lion, when the computer suddenly froze.
    I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
    My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
    Even with all this, I can only start in safe mode.
    Here is a copy of the log. If anyone can help, I would be grateful !
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
    03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
    03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
    03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
    03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
    03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
    03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
    03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
    03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
    03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
    03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
    03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
    03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
    03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
    03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
    03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
    03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
    03.05.14 11:48:37.000 kernel[0]: 2.300782:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
    03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
    03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
    03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
    03.05.14 11:48:37.000 kernel[0]: init
    03.05.14 11:48:37.000 kernel[0]: probe
    03.05.14 11:48:37.000 kernel[0]: start
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
    03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
    03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (502 27 1097)
    03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
    03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
    03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    03.05.14 11:48:37.642 kdc[78]: label: default
    03.05.14 11:48:37.642 kdc[78]:     dbname: od:/Local/Default
    03.05.14 11:48:37.642 kdc[78]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:37.642 kdc[78]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
    03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
    03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
    03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
    03.05.14 11:48:43.092 configd[56]: network changed.
    03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
    03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
    03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
    03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
    03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    03.05.14 11:48:46.813 digest-service[67]: label: default
    03.05.14 11:48:46.813 digest-service[67]:     dbname: od:/Local/Default
    03.05.14 11:48:46.813 digest-service[67]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:46.814 digest-service[67]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
    03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
    03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
    03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
    03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
    03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
    03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
    03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
    03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
    03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
    03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
    03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
    03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
    03.05.14 11:48:50.554 configd[56]: network changed: DNS*
    03.05.14 11:48:50.556 configd[56]: network changed: DNS*
    03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
    03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
    03.05.14 11:48:50.561 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    03.05.14 11:48:51.199 kdc[78]: KDC started
    03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume.  destroying old logs. (157 8 1095)
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
    03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
    03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
    03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume.  destroying old logs. (155 10 1095)
    03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
    03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
    03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
    03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
    03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
    03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
    03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
    03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
    03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
    03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
    03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
    03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
    03.05.14 11:51:07.187 distnoted[172]: # distnote server agent  absolute time: 177.064182367   civil time: Sat May  3 11:51:07 2014   pid: 172 uid: 502  root: no
    03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
    03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
    03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
    03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802

    I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
    I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
    I am posting the latest system log (on this one, I forgot to unplug the printer)
    Please help !!!
    May  4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.appstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.bookstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.eventmonitor" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.install" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.iokit.power" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.mail" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.MessageTracer" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.performance" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.securityd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:45 --- last message repeated 6 times ---
    May  4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
    May  4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    May  4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
    May  4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    May  4 20:38:44 localhost kernel[0]: zone leak detection enabled
    May  4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
    May  4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May  4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
    May  4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    May  4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May  4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May  4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
    May  4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    May  4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    May  4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May  4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    May  4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    May  4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    May  4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    May  4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    May  4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    May  4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    May  4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    May  4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    May  4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
    May  4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    May  4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
    May  4 20:38:44 localhost kernel[0]: USBF:    1.518    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
    May  4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
    May  4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
    May  4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
    May  4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
    May  4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
    May  4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
    May  4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
    May  4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
    May  4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
    May  4 20:38:44 localhost kernel[0]: 2.261691:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    May  4 20:38:44 localhost kernel[0]: USBF:    4.521    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    5.362    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    8.760    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    9.587    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
    May  4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
    May  4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    May  4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    May  4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    May  4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May  4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
    May  4 20:38:45 localhost distnoted[65]: # distnote server daemon  absolute time: 28.917725827   civil time: Sun May  4 20:38:33 2014   pid: 65 uid: 0  root: yes
    May  4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
    May  4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
    May  4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
    May  4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    May  4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    May  4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
    May  4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
    May  4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    May  4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: init
    May  4 20:38:49 localhost kernel[0]: probe
    May  4 20:38:49 localhost kernel[0]: start
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
    May  4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    May  4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: DSMOS has arrived
    May  4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
    May  4 20:38:51 localhost kdc[79]: label: default
    May  4 20:38:51 localhost kdc[79]:     dbname: od:/Local/Default
    May  4 20:38:51 localhost kdc[79]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:51 localhost kdc[79]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost digest-service[66]: label: default
    May  4 20:38:52 localhost digest-service[66]:     dbname: od:/Local/Default
    May  4 20:38:52 localhost digest-service[66]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:52 localhost digest-service[66]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    May  4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
    May  4 20:38:52 localhost configd[55]: network changed.
    May  4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
    May  4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
    May  4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    May  4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    May  4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
    May  4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
    May  4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
    May  4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
    May  4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
    May  4 20:38:58 --- last message repeated 1 time ---
    May  4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
    May  4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    May  4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
    May  4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    May  4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    May  4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
    May  4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    May  4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
    May  4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    May  4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
    May  4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    May  4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    May  4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
            "00-22-41-ce-73-b2",
            "7c-d1-c3-bc-ed-9b",
            "04-f1-3e-e9-76-f5",
            "d4-88-90-f0-2d-96",
            "90-27-e4-f2-fd-53"
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
    May  4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
    May  4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
    May  4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
    May  4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    May  4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
    May  4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
    May  4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
    May  4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    May  4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
    May  4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
    May  4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    May  4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
    May  4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
    May  4 20:39:43 --- last message repeated 1 time ---
    May  4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    May  4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    May  4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    May  4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    May  4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    May  4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent  absolute time: 252.755084619   civil time: Sun May  4 20:42:17 2014   pid: 161 uid: 502  root: no
    May  4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
    May  4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent  absolute time: 272.385323107   civil time: Sun May  4 20:42:37 2014   pid: 169 uid: 89  root: no
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
    May  4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
    May  4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0

  • Can't start managed server in Oracle Service Bus 10gR3

    Using Windows 2003 Enterprise.
    Standard install of OSB 10gR3 - only changes from standard are that I also installed the samples, otherwise, it's default install the whole way.
    My windows machine name is the same as a name entry in the HOSTS file, as follows
    127.0.0.1 localhost
    xxx.xxx.xxx.xxx osb-strat
    yyy.yyy.yyy.yyy osb-other
    I eventually want to setup a domain across 2 machines with 2 servers, one on each, hence the two entries.
    For the life of me, I cannot start a managed server for OSB, I keep seeing
    ####<Feb 27, 2009 10:54:11 PM CST> <Critical> <WebLogicServer> <osb-strat> <Strategic> <Main Thread> <<WLS Kernel>> <> <> <1235737451969> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
         at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    I did manage it once, but then I had problems seeing the second machines Node Manager - I have figured that out, but during my screwing around, I lost how to get the primary machines service to boot - I have not even attempted to boot the server on the second, remote machine!
    I have tried creating the domain using the Config wizard and creating the server/machine using the config wizard.
    I have tried creating an empty domain using the Config wizard then using the Admin Console to create the machine and server.
    I have tried editing the boot.properties in C:\bea\user_projects\domains\TheDomain\servers\Strategic\data\nodemanager
    I have tried setting the listening address to the Hostname of the server, blank, to the IP address.
    I have tried configuring the service to not do host name validation.
    I do see, in the startup logs, that it notes that the hostname resolves to both the external IP and 127.0.0.1
    I have tried re-installing (multiple times) hoping to have a fresh start.
    I have even setup a Snapshot, post installation so I can re-start configuration from the very start.
    I am at my wits end.
    Surely, it can't be that hard to setup a vanilla server and boot it?
    Any suggestions, maybe even a step by step creation of a single server (other than the admin server for the domain), that boots, starting immediately after installation?
    Any assistance would be greatly appreciated.
    ...Lyall

    We also use a boot.properties in ${domain.home}, which may only be for Admin server, but worth checking anyway. Also, I often receive the boot.properties message you're seeing when there's other problems upstream, and I've found the message to be quite misleading at times. For example, if I have a problem with an LDAPAuthenticator or any other security mechanism I'll often see the boot.properties message eventhough the problem has nothing to do with that file.

  • Can I install Calendar Server on another partition other than root file system

    Can I install Calendar Server on another partition other than / ?
    <P>
    In this version, the default path is hard coded to install in
    /users/unison. However, if you do not have enough room on your root
    partition or choose to install it in another location, you can do so
    using a logical link. The installation guide explains this as well.
    <P>
    For example, suppose you want /users/unison, which must NOT already
    exist, to be logically linked to /var/opt/unison, which must exist.
    Then as root user:
    <P>
    <UL>
    <LI>
    Create the directory /users (if it does not already exist)
    <P>
    % mkdir /users
    <P>
    <LI>
    Create the logical link. The directory /users/unison must
    NOT exist before doing this.
    <P>
    % ln -s /var/opt/unison /users/unison
    </UL>
    <P>
    <P>

    makes a lot of sense.  I am looking for an answer myself.  My documents folder long ago outgrew it's place on the boot drive.  It would be nice to keep it in the user folder organized on another disc

  • Dual boot Windows Server 2008 R2 and RHEL 7 Server?

    Do someone know how can I setup dual boot of Windows Server 2008 R2 and RHEL 7 Server?
    I've tried to install Windows first, then shrink, then install RHEL there.
    But GRUB2 loader doesn't offer to start Windows, only Linux in the menu. (probably Windows partition need to be added to grub2 somehow)

    Hi Oleg Vazhnev,
    Please refer to following article and check if can help you.
    How
    to add Vista/Windows 7 partition to Grub 2 (Ubuntu 9.10, Karmic Koala)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Meanwhile, please also refer to following video and check if can provide you more details of installation.
    Install RHEL 7 in Legacy Mode (Dual Boot Windows Server
    2008 R2)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Can't see Samba Server in network browse

    Hi there,
    I have been trying stuff for hours, now I think it's time to ask someone:
    I have a samba server with a static ip (netctl).
    I can ping the server, ssh to it, smbclient -L is working and also in Nautilus if I use the 'Connect to Server' option everything works fine.
    But when I try to 'Browse Network' I only see the Workgroup but when I want to access the Workgroup after some time of wait I get 'Unable to access location Failed to retrieve share list from server: No route to host'.
    Also if I stop using static ip with netctl and use dhcpcd 'Browse Network' starts working...
    I really don't see whats the problem, does someone else?
    Here is my netctl profile:
    Description='A basic static ethernet connection'
    Interface=enp2s0
    Connection=ethernet
    IP=static
    Address=('192.168.178.200/24')
    Gateway='192.168.178.1'
    DNS=('192.168.178.1')
    And my smb.conf:
    [global]
        workgroup = WORKGROUP
        server string = SMB
        security = user
        map to guest = bad user
        log file = /var/log/samba/%m.log
        max log size = 1000
        interfaces = lo enp2s0
        bind interfaces only = true
        dns proxy = no
    [Files]
        path = /data/smb/Files
        public = no
        valid users = qam
        writable = yes
    [Shared]
        path = /data/smb/Shared
        public = yes
        only guest = yes
        writable = yes
    Thanks in advance
    qam

    i discovered a little strange thing...i can see remote pc only after 30-40 minutes after i booted the server machine, so it is not random, why this?

  • Discoveryd process uses 100% CPU - Safari Can't find the server

    Hello
    Since upgrading to Yosemite, I lose connection to the internet 2 or 3 times a day. (Outlook goes offline at the same time)
    This is with a wired connection. (Wi-Fi is turned off)
    Safari gives me the "Safari Can't Find the Server" message.
    Restarting the computer solves the issue temporarily.
    While I'm unable to connect to the internet, Activity Monitor shows a process named "discoveryd" that uses 100% CPU.
    Force quitting this process gives me back access to the internet instantly. Unfortunately, I suffered a kernel panic (auto restart) a few minutes after force quitting discoveryd. I'm not 100% sure those 2 are related but it would be an odd coincidence as I never experienced had a single kernel on that system. Haven't tried force quitting that process since.
    I'm using this iMac in a work environment. (Connected to a windows file server and exchange)
    This issue has been happening 2-3 times a day since the day I upgraded to Yosemite.
    Any pointers on what could fix this issue ?
    Thanks

    Start time: 10:04:31 11/11/14
    Model Identifier: iMac11,3
    System Version: OS X 10.10 (14A389)
    Kernel Version: Darwin 14.0.0
    Time since boot: 1:39
    SATA
       WDC WD1001FALS-40Y6A0                  
    USB
       USB-PS/2 Optical Mouse (Logitech Inc.)
    Diagnostic reports
       2014-10-30 Adobe InDesign CC 2014 hang
       2014-10-30 Adobe InDesign CS6 hang
       2014-10-30 Adobe InDesign CS6 crash
       2014-10-30 FileMaker Pro hang x5
       2014-10-30 Finder crash* x2
       2014-10-30 Finder hang
       2014-10-30 Microsoft Outlook hang
       2014-10-30 iTunes hang
       2014-10-31 Adobe InDesign CC 2014 hang
       2014-11-04 Adobe InDesign CC 2014 crash x2
       2014-11-04 Adobe InDesign CC 2014 hang
       2014-11-04 Adobe InDesign CS6 crash x2
       2014-11-04 Microsoft Excel hang
       2014-11-05 Adobe InDesign CS6 hang
       2014-11-05 FileMaker Pro hang
       2014-11-10 Adobe InDesign CC 2014 hang
       2014-11-10 FileMaker Pro hang
       2014-11-11 Adobe Illustrator hang
        * Code injection
    Log
       Nov  5 08:25:33 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  5 10:07:01 process discoveryd[49] thread 1190 caught burning CPU! It used more than 50% CPU (Actual recent usage: 82%) over 180 seconds. thread lifetime cpu usage 91.907001 seconds, (77.250009 user, 14.656992 system) ledger info: balance: 90001960650 credit: 91780798965 debit: 1778838315 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 109240779280
       Nov  5 10:09:03 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  5 11:46:47 process discoveryd[49] thread 1256 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 91.591946 seconds, (75.959886 user, 15.632060 system) ledger info: balance: 90000109700 credit: 91486467544 debit: 1486357844 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90105095085
       Nov  5 11:54:53 PM notification timeout (pid 275, Creative Cloud)
       Nov  5 11:54:53 PM notification timeout (pid 344, Adobe CEF Helper)
       Nov  5 11:54:53 PM notification timeout (pid 343, Adobe CEF Helper)
       Nov  5 12:35:03 jnl: b(1, 2): replay_journal: from: 57934848 to: 61127168 (joffset 0x1721c000)
       Nov  5 12:35:03 jnl: b(1, 2): journal replay done.
       Nov  5 12:38:37 jnl: b(1, 2): replay_journal: from: 61127168 to: 67488768 (joffset 0x1721c000)
       Nov  5 12:38:37 jnl: b(1, 2): journal replay done.
       Nov  5 12:38:40 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  5 13:26:28 process mdworker32[357] thread 8766 caught burning CPU! It used more than 85% CPU (Actual recent usage: 86%) over 40 seconds. thread lifetime cpu usage 81.048638 seconds, (76.580865 user, 4.467773 system) ledger info: balance: 34001309838 credit: 80940733771 debit: 46939423933 limit: 34000000000 (85%) period: 40000000000 time since last refill (ns): 39339579198 [fatal violation]
       Nov  5 14:26:53 PM notification timeout (pid 231, Creative Cloud)
       Nov  5 14:26:53 PM notification timeout (pid 325, Adobe CEF Helper)
       Nov  5 14:26:53 PM notification timeout (pid 326, Adobe CEF Helper)
       Nov  5 14:45:49 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  5 14:45:49 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  5 14:47:27 process discoveryd[49] thread 1023 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 91.572722 seconds, (77.540749 user, 14.031973 system) ledger info: balance: 90015163759 credit: 91483527972 debit: 1468364213 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90121915160
       Nov  5 15:13:33 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  6 08:25:36 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  6 11:59:36 PM notification timeout (pid 286, Creative Cloud)
       Nov  6 11:59:36 PM notification timeout (pid 355, Adobe CEF Helper)
       Nov  6 11:59:36 PM notification timeout (pid 356, Adobe CEF Helper)
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smbsmb2_sm2_b_parse_smchabnge_no_tipfary: ssmb_er_chq_replya failngeed_n ot6if0
       Nov  6 12:29:24 y: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_ssmmb2_b_spmabr_sparsee_c_hancgeh_naotinfgy: smb_rq_re_epnlyoti failfedy :60 sm
       Nov  6 12:29:24 b_rq_reply failed 60
       Nov  6 12:29:24 rs failed Qsmumber2b_sy m_Inrqfbo __pa60rr
       Nov  6 12:29:24 rse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 ply failed 60smb2_smb_parse_change
       Nov  6 12:29:24 _notify: smsmb_rq_reply failb2_ed smb_6parse_0
       Nov  6 12:29:24 ply failed smb2_smb_pa60
       Nov  6 12:29:24 rse_change_nsmb2otif_smy:b_ spmb_rq_reply failedars e_c60han
       Nov  6 12:29:24 ge_notify: smb_smb2_smb_parse_chrqange__repnotify: smb_rly fq_ailed reply failed 60
       Nov  6 12:29:24 smb2_smb_parssmb2_e_smbchange_pa_nrsote_chifany:ge _nosmb_tifrq_y:re smplb_y rq_fareilply failed 60
       Nov  6 12:29:24 y failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 q_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov  6 14:01:02 process discoveryd[49] thread 1259 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
       Nov  6 15:49:49 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov  6 16:10:23 process Adobe InDesign C[435] caught causing excessive wakeups. Observed wakeups rate (per sec): 309; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45011
       Nov  7 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov 10 09:28:46 process discoveryd[49] thread 1195 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 152.284113 seconds, (127.648543 user, 24.635570 system) ledger info: balance: 90002963251 credit: 152063056684 debit: 62060093433 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90142287445
       Nov 10 09:42:09 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov 10 11:20:45 process discoveryd[49] thread 1182 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 150.526060 seconds, (126.552866 user, 23.973194 system) ledger info: balance: 90000111985 credit: 150369654672 debit: 60369542687 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90164134478
       Nov 10 12:14:06 PM notification timeout (pid 261, Creative Cloud)
       Nov 10 12:14:06 PM notification timeout (pid 332, Adobe CEF Helper)
       Nov 10 12:14:06 PM notification timeout (pid 333, Adobe CEF Helper)
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 y failed 60
       Nov 10 12:43:27 failed mb60
       Nov 10 12:43:27 smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 12:46:06 process WindowServer[121] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
       Nov 10 12:49:29 jnl: b(1, 2): replay_journal: from: 27704832 to: 35355648 (joffset 0x1721c000)
       Nov 10 12:49:29 jnl: b(1, 2): journal replay done.
       Nov 10 12:54:05 jnl: b(1, 2): replay_journal: from: 35355648 to: 40313344 (joffset 0x1721c000)
       Nov 10 12:54:05 jnl: b(1, 2): journal replay done.
       Nov 10 12:54:08 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov 10 14:31:43 PM notification timeout (pid 232, Creative Cloud)
       Nov 10 14:31:43 PM notification timeout (pid 327, Adobe CEF Helper)
       Nov 10 14:31:43 PM notification timeout (pid 324, Adobe CEF Helper)
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 : smb_rq_reply failesmbd 2_smb_60
       Nov 10 15:07:47 parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 tify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_nsotify:mb2 sm_b_rq_reply sfailmed b60
       Nov 10 15:07:47 _parse_change_notify: smbsmb2_rq__rsepmb_parsly failee_d ch60ange_notify
       Nov 10 15:07:47 : smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:47:46 process discoveryd[49] thread 1013 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 153.503446 seconds, (128.774521 user, 24.728925 system) ledger info: balance: 90007455004 credit: 153327303891 debit: 63319848887 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90099512937
       Nov 11 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov 11 09:38:05 process Adobe InDesign C[553] caught causing excessive wakeups. Observed wakeups rate (per sec): 283; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
       Nov 10 14:31:43 PM notification timeout (pid 327, Adobe CEF Helper)
       Nov 10 14:31:43 PM notification timeout (pid 324, Adobe CEF Helper)
       Nov 10 14:31:43 com.apple.dpd: Service exited with abnormal code: 75
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 : smb_rq_reply failesmbd 2_smb_60
       Nov 10 15:07:47 parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 tify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_nsotify:mb2 sm_b_rq_reply sfailmed b60
       Nov 10 15:07:47 _parse_change_notify: smbsmb2_rq__rsepmb_parsly failee_d ch60ange_notify
       Nov 10 15:07:47 : smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
       Nov 10 15:47:46 process discoveryd[49] thread 1013 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 153.503446 seconds, (128.774521 user, 24.728925 system) ledger info: balance: 90007455004 credit: 153327303891 debit: 63319848887 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90099512937
       Nov 10 16:47:01 com.apple.WebKit.Networking.UUID: Service exited with abnormal code: 1
       Nov 11 08:25:37 com.apple.Kerberos.kdc: Service exited with abnormal code: 1
       Nov 11 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Nov 11 08:56:36 com.apple.dpd: Service exited with abnormal code: 75
       Nov 11 09:38:05 process Adobe InDesign C[553] caught causing excessive wakeups. Observed wakeups rate (per sec): 283; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
    CPU per process: com.apple.WebKit (UID 501) is using 41.2  %
    Daemons
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.adobe.fpsaud
    Agents
       com.adobe.CS4ServiceManager
       com.adobe.AdobeCreativeCloud
       com.adobe.ARM.UUID
       com.adobe.ARM.UUID
       com.apple.Safari
       com.adobe.ARM.UUID
       com.google.keystone.user.agent
       com.apple.AirPortBaseStationAgent
    App extensions
       com.apple.InternalFiltersXPC
    Contents of /Library/LaunchAgents/com.adobe.AdobeCreativeCloud.plist (checksum 461455494)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.AdobeCreativeCloud</string>
        <key>Program</key>
        <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
        <string>--showwindow=false</string>
              <string>--onOSstartup=true</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
        <dict>
         <key>Label</key>
         <string>com.adobe.AAM.Scheduler-1.0</string>
         <key>Program</key>
         <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
         <key>ProgramArguments</key>
         <array>
            <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
            <string>-mode=scheduled</string>
         </array>
         <key>StartCalendarInterval</key>
         <dict>
           <key>Minute</key>
           <integer>0</integer>
           <key>Hour</key>
           <integer>2</integer>
         </dict>
        </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 394026997)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        <string>semi-auto</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 4116814193)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        <string>semi-auto</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist (checksum 4209634474)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.apple.Safari</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
        <string>--sync</string>
        <string>com.apple.Safari</string>
        <string>--entitynames</string>
        <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>ThrottleInterval</key>
        <integer>60</integer>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
        </array>
       </dict>
       ...and 1 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 64800286)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Bad plists
       Library/Preferences/com.apple.iphotomosaic.plist
    Listeners
       launchd: afpovertcp
       launchd: afpovertcp
       launchd: microsoft-ds
       launchd: ssh
       launchd: microsoft-ds
       launchd: ssh
       kdc: kerberos
    User login items
       Microsoft Outlook
       - /Applications/Microsoft Office 2011/Microsoft Outlook.app
       TransmitMenu
       - /Applications/Transmit.app/Contents/MacOS/TransmitMenu.app
       ClipMenu
       - /Applications/ClipMenu.app
       Dept
       - /Volumes/Dept
       Public
       - /Volumes/Public
       Apps
       - /Volumes/Apps
    Restricted files: 4584
    Lockfiles: 99
    Elapsed time (s): 352

  • Need a new mac pro! Can I boot MacPro 6,1 (mid 2012) with an internal HD with OS 10.6 (Snow Leo)?

    5 hours after reading here: (so much information that says "yes" "maybe" "no".....)
    I want and have to change my actual MacPro (late 2007) to a newer one, because without my business is over.
    The newest one (end 2013) is not possible, because my other hardware is too old for that one.
    (still need Firewire and Rosetta)
    So I decided to buy an older "classicle" MacPro to put my 3 or 4 pieces of 2TB HDD in...
    ...... But I still need Rosetta, -> OS 10.6
    My question is:
    Can I boot a mac 6,1 (mid 2012) with a Harddisk with 10.6, I take out of my old machine?
    yes? anything to be aware or to update? (answeres here say mostly yes, sometimes, never ...)
    For sure I am interested in the latest model..... but will it work?
    If not:  I will buy a mac 5,1 (mid 2010).
    Anything to be aware or to update, if I pull in my HD with 10.6 out of the old model from late 2007?
    I don't want to downgrade to SL !!!!!!!
    I just want the Possibility to boot internal from the original OS on the first drive and from 10.6 on a second drive !!)
    (This good old Power Machines (all in one) will be jewels next year.....)  ;-)

    Mac Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    Mac Pro (Mid 2012)
    Jun 2012
    10.7.3
    10.8, 10.8.3
    11D2001, 12A269, 12D78
    Mac Pro (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3
    10F2521, 10F2554, 11A511a, 11C74, 11D2001
    Mac Pro with Mac OS X Server (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3 (Server)
    10F2522, 11A511a, 11C74, 11D2001 (Server)
    Mac Pro (Early 2009)
    Mar 2009
    10.5.6
    10.6
    9G3553, 10A432
    Mac Pro (Early 2008)
    Jan 2008
    10.5.1
    10.5.2, 10.5.4
    9B2117, 9C2031, 9E25
    Mac Pro
    Aug 2006
    10.4.7
    10.4.8, 10.4.9, 10.4.10, 10.5
    8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
    -- from:
    Mac OS X versions (builds) for computers
    For example the Mac Pro 2010 CAN run 10.6.4 or later BUT--
    --- the last "Full Retail" 10.6 DVD conatins 10.6.3, which will not boot. You need a different Mac of just the right age to Install on, [starting from a Full Retail DVD, not a DVD from a different model] update to 10.6.8, then swap the drive over.
    The assertion has been made that the 2012 model (which runs 5,1 firmware) is indistinguishable from the 2010 model (which runs 5,1 firmware) as far as Hardware and therefore as far as what Mac OS X it can run. EveryMac.com agrees that this model will run 10.6.4.

Maybe you are looking for

  • [solved] No sound on my EeePc

    Hi, No sound on my netbook. I guess the default sound card is the wrong one, I try to correct that, with no success. I'm following the wikis and tips I found on forums, I don't know where I'm wrong. I am not using a DE, just Openbox. aplay -l gives (

  • Weird problems with ipod classic 80gb, hdd's gone?

    Hi, hope u could help me. Excuse my not fluent english, I'm not british/american so I will try to make myself as clear as possible. Thanks First of all, got iPod classic 80gb, systems Vista/XP, was trying to cope with this problem on both computers,

  • Video Podcasts Question

    Hello all. I'm still a rookie to the MacWorld. Is it possible to view video podcasts in full screen mode using iTunes? I recently subscribed to the MacBreak video podcasts but when I watch it on my iMac G5, all I get is the lower left hand corner vie

  • Copy Ipod classic to a iTunes

    I had troubles with my computer and all files was erased but my ipod its full with music, videos etc. How can i do for send all music from my ipod to a new itunes??? without los any data?? Thank you

  • Problem with IOS8 update and my 2013 Honda Accord

    Updated my iPod touch with IOS8 and now it acts weird while connected to the stereo of my 2013 Honda Accord with a USB cable.  When I start the car and set the stereo to iPod, it will grab a random song from the iTunes Library and start playing it.