Can't boot correctly or resume from sleep Compaq laptop, blinking caps light

Hi everyone, I'd like to know if there's a way to fix this weird problem, my laptop can't boot correctly (it shows the CPU blinking caps error code), and after reseting 4 times or so it boots successfully and it works great after that (never saw a BSOD or hang or anything). I can't also resume the laptop from sleep, it shows the same blinking error code.
I had the same problem like 3 months ago, I replaced the CPU with a new one and it worked without a hassle until now. (The reseting trick didn't work back then, so I guess it's a different problem now). Also since then the laptop never overheated, my CPU is always underclocked at 25% using the Maximum Processor State setting in Windows (it probably isn't underclocked at 25%, more likely at 50% or so, but I can certainly feel the difference because it never got really hot, the CPU reports a temperature of 110F/48C under normal use, and it always feels cool to the touch).
I mean, although the laptop works once I get it to boot, not only it's annoying but also I don't know how long it is gonna work doing like 5 resets every single day.
I've tried the arrow keys trick, pressing the power button without the battery or AC connection, I have also reset the BIOS, it booted correctly the first time (it asked to reset the BIOS settings to default), but afterwards it showed the same behavior.
Please don't waste your time telling me to buy a new motherboard and/or CPU, that would be impractical because it's way more convenient to buy a new laptop in that case.
Thank you very much.

Okay so after like a month or so I found a way to boot it up without problems, it also fixes the sleep problem. So if anyone is having the same problems, try the following: Turn on your laptop pressing the power button for a couple of seconds (just until you see the boot screens) as soon as possible after you connect the AC cable.

Similar Messages

  • X220 resume from sleep and boot issues

    This is driving me crazy! I have an X220 with Windows 8 and UEFI boot installed.
    It all started when I first installed Windows 8 a few months ago which required me to update my BIOS to the latest version. The installation process often got stuck when booting from the Installation CD (the round circle stopped spinning, the display was at full brightness). Eventually I managed to boot into the Installer (when the boot logo doesn't get stuck, the display is then dimmed to minimum).
    I was quite happy to have a superfast lightweight OS which booted in an instant.. When suddenly it started to get stuck when booting (same issue with the boot logo not spinning anymore). This happens quite randomly, but I often manage to boot (maybe 2-3 times a week, I don't boot often though..). Now, the booting hangs are less of an issue for me but more often that that it fails to resume from sleep. The LEDs flash and then it instantly drops to sleep mode again (well at least the sleep/moon LED is active). This happens quite often as I sleep/resume up to 5-10 times a day (changing lecture rooms, meeting rooms, save battery when the lectures are boring, ...)
    Now after researching and spending hours in debugging this issue, it seems that I'm not the only one having this (or a similar) issue, but often without any definitive solution being specified.
    This is what I have already tried:
    * Upgrade BIOS and SSD firmware to latest
    * Install/update latest drivers
    * Mess around with BIOS options
    ** UEFI/Legacy First options
    ** Intel Virtualization/vt-d
    ** Others..
    I know based on other threads that I'm not the only one experiencing exactly these issues. Has anyone managed to fix this?
    Thank's in advance
    Fabio Scala

    I had a similar issue, as soon as a described even a little bit of it to warrenty support they sent someone to swap the board
    It seems thats the only fix, its been fine since 

  • MacBook Pro resumes from sleep, but keyboard types symbols as opposed to correct letters

    Hi, all,
    Having been a mac owner for a few years now, I guess it actually shows the quality of the product that this is the first time I've had to post on this site.
    I've recently upgraded from my 2008 model MacBook to an early 2011 model MacBook Pro 17" with Lion. This machine was brand new when I purchased it, and is a very lovely bit of kit.
    The problem comes from the sleep functionality. Approximately one time of three, when I resume from sleep, the keyboard will be malfunctioning. What I mean by this is that when I type letters, they come out as symbols instead. I haven't been sharp enough to get a direct mapping of A-Z yet (I will do next time), but these aren't the 'ALT' key symbols (å∂ß∫å˙∂©ß), they're more like this (which is what I typed into Notepad last time this happened) =
    ƒ∆∂∆ßåß∂ƒ∂∆ß∆å˚¬ß∆¬ß
    In order to resolve this, I need to restart the computer, which, thus far, has resolved the issue every time. That said, it's a bit of a pain, so would like to know what's going on and if there is any way to prevent it.
    All the software on the mac is up to date at time of writing, there have been no expansions to the machine (yet), so it's exactly as shipped. It's the 2.2GHz i7 Quad Core device, and is the first one supporting the thunderbolt graphics connector.
    Does anyone have any idea about this? Could it be a hardware problem (if so, I want to return it asap to get it sorted). I've looked all over google for this, but not found a single result, so was keen to see if anyone on here had experienced it before I start the arduous process of working out if it's a hardware issue.
    Cheers,
    SB

    No one else experienced anything like this, then?

  • I7 iMac with Bootcamp 3.1 and Windows7 64-bit won't resume from sleep

    When I try to resume from sleep, by clicking the magic mouse button, the screen comes up and I can move the mouse around but the bluetooth keyboard does not work and I can't launch any programs. Have to use the rear button to force a power off and restart.
    Is anyone able to resume from sleep okay and carry on using Windows 7? If so, any tips? Thanks in advance, very frustrating.

    I don't have an iMac, and it seems those have some design "issues" to say the least. I'd say yes, motherboard and/or firmware (UEFI or SMC, or both) could be buggy and at fault.
    Other than resetting SMC and running Apple Hardware Test, not sure what else or next to try.
    I've seen a number of BIOS updates out in the last months for my PC motherboards that have definitely improved sleep, S3, hibernation - EVGA, Gigabytes, and Intel - all X58 vs P55 (Lynnfield Core i5/7 LGA 1156) the iMac uses.
    http://anandtech.com/cpuchipsets/showdoc.aspx?i=3634
    http://en.wikipedia.org/wiki/IntelCorei5
    First I switched to Windows Vista/7, then I switched to build-my-own and custom parts. Love the looks of iMac, came close at one point, but I prefer the specs, options, and configure for my own needs in hard drives, graphics over cool factors.
    The iMac even in 2008 when it came with Penryn 64-bit processors never got 64-bit Vista/Boot Camp drivers, and that was why I didn't buy iMac back then, just lack of support I guess, and not seeing the market and need (for a good solid Windows desktop machine by Apple).

  • Resume from Sleep / Hibernate issues

    Hi all,
    First time poster. I have a Helix and am running into a heap of resume from sleep (and hibernate) issues.
    The sleep issues tend to happen overnight - I do not have this issue if I sleep the machine and then wake it up 5-10 minutes later (e.g. moving between meetings at work). However, when I attempt to wake the machine up in the morning, it fails to resume from sleep, and instead boots from scratch.
    Typically, when the unit is in this state, the status led on the lid is rapidly blinking (which I believe means that it's trying to enter sleep) Since there is nothing in the Windows event log during the overnight period, I'm wondering whether it's trying to enter a deeper sleep mode and failing.
    This happens every second day or so. Which is really frustrating as a tend to lose some work.
    I tried enabling hibernate as a trial, to see if that would avoid the issue, but resuming from hibernate fails as well. At least I get a Windows event log entry for this (source: kernel-power. The unit fails to resume from hibernate with status 0xC000000D)
    I have the September 10 BIOS update, and am running Windows 8.1 Enterprise (though I had the issue with Windows 8 as well).
    Any ideas on how I can troubleshoot this?
    Regards
    AC

    Windows 8: In Windows 8, the default shutdown behavior puts the system into hybrid shutdown (S4) and all devices are put into D3. Remote wake from hybrid shutdown (S4) or classic shutdown (S5) is completely unsupported. In Windows 8, NICs are explicitly not armed for wake in both the classic shutdown (S5) and hybrid shutdown (S4) cases because users expect zero power consumption and battery drain in the shutdown state. This behavior removes the possibility of spurious wakes when explicit shutdown was requested. As a result, Wake-On-LAN is only ever supported from sleep (S3) or hibernate (S4) in Windows 8.
    Note that in Windows 8, hybrid shutdown (S4) stops user sessions but the contents of kernel sessions are written to hard disk. This enables faster boot.
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa373229(v=vs.85).aspx
    From the Helix User Guide:
    •Slow blinking: The tablet is in sleep mode.
    •Fast blinking: The tablet is entering hibernation mode or sleep mode.
    That was my reason for clarifying if hybrid-sleep was enabled; since it's the default setting and you noted that the LED was blinking fast. Does the LED ever stop blinking fast?
    There can/may be multiple log entries during a normal sleep operation,  because "the system uses the lowest-powered sleep state supported by all enabled wake-up devices." If one of those devices wakes the system (this does not mean power on) then the logs will report the devices and will likely return to a another level of sleep, but this does not mean full power loss or empty logs.
    If the system has successfully entered sleep state, then you should see the following message in System Event logs. 
    Event 42, Kernel - Power
    This system is entering sleep.
    Sleep Reason: Button or lid
    When the system is successfully woke you will see a System Event Log similar to this:
    Event 1, Power - Troubleshooter
    The system has returned from a low power state.
    Sleep time: 2013-10-08T01:42:25.XXXXXXXX
    Wake time: 2013-10-08T05:53:21.XXXXXXXX
    However, there will be other events in the logs after sleep and prior to this wake period, such as hardware device issues(My helix has Bluetooth device warnings, nfc driver warnings and some other nondescript hardware errors), kernel messages (about boot manager, boot options, etc.).
    Have you changed the behavior of the power button?
    You also can program the power buttons so that by pressing the power button you can shutdown the tablet or put it into sleep or hibernation mode. To achieve this, you need to change your power plan settings. To access power plan settings, do the following:
    From the desktop, tap the battery status icon in the Windows notification area.
    Tap More power options.
    In the navigation panel, tap Choose what the power buttons do
    Follow the onscreen instructions to configure settings.
    Lastly, when you updated to Windows 8.1, did you format the whole C:\ (mSATA) drive?
    Helix: 3697 CTO.
    Thinkpad user since IBM. I do not work for Lenovo or any entity working for Lenovo.

  • Mac Os X Lion Crashes after resuming from Sleep

    Hi Everybody, i'm experiencing an issue on my 13'' MBP Early 2011 (i5 processor, 4GB RAM, 750GB HD SATA). My MBP often got stuc after i resume from my monitor sleep. I'll explain it in a better way: After i resume from sleep, there's at first a black screen in which the mouse can move, after that the mouse becmes the classic loading wheel and it freezes copletely, remaining in this situation. I thought it was a screensaver compatibility issue, but the problem stand still after i uninstalled screensaver and deactivate the screensaver options. I think it's a problem with Lion with the HD, but i have no evidence of it. Can Anyone help?
    Thank you in advance,
    Daniele.

    Whenever someone comes to me with crashing and freezing on waking up I look at 3 things and typically in this order:
    (1) Hard drive - usually if it is the hard drive SMART has already given a warning if the drive is actually failing or running Disk Utility reveals problems - often problems that cannot be fixed. Also, when the crashes are related to the hard drive there may actuallly be nothing wrong with the drive and a simple erase and reinstall will fix it.
    (2) Software issues - the old trick of creating a new account and logging into it to see if the problem is in your account or global helps. Looking in console to see if there's an error message logged just before the crash can be instructive - or not. Often the crash occurs before an error is logged. Sometimes reinstalling the OS is the solution - that's where having a FireWire hard drive is helpful. I can just boot with it and see if the computer still crashes on waking. If not I know to reinstall the OS.
    (3) RAM - marginal and faulty RAM can be the culprit in many cases. The frustrating thing about RAM is that RAM tests seldom give false positives, if the test says you have bad RAM, you do. Unfortunately when the test reveals nothing wrong the RAM might still be defective, just not enough for the test to catch.
    However, past history has led me to put RAM at the top of the list after an OS upgrade. Marginal RAM has been the culprit of many crash on wake problems with previous OS upgrades. I especially recall Leopard and Snow Leopard being affected - at the shop where I sometimes work we did a lot of RAM warranty replacements after those two upgrades. And here at the support forum we saw lots of people complaining of crash on wake problems coming back and saying, "Yep, got my RAM replaced and all is well." So if any of you are like me and upgraded your RAM, if you have the original RAM sitting around swap it in and see if the crashes stop.

  • X220 very slow reconnecting to WiFi when resuming from sleep

    So my X220 with the Intel 6205 card is having issues reconnecting to WiFi when resuming from sleep or hibernation. It takes about a minute for it to do so, though occasionally it will reconnect right away. Maybe 1 out of 20. When doing a cold boot or restart, it connects immediately upon the desktop showing up.
    This was not always the case, in fact when I first got my X220 in June, I have not had this issue.... In fact, I don't know when it started happening, but it was maybe a couple months ago. I just thought it was my old router going bad. Well I got a new router, and it still happens. I have the latest Intel WiFi drivers from Lenovo, and I even tried downgrading to the previous driver from Intel's site. Still the same problem. I tried setting a default profile in access connections, and that does not help. In fact, it behaves the same way if I totally uninstall access connections as well. In fact I tried this on three different brand routers, and I can reproduce it on all of them (Asus, Netgear & TP-Link) so I think this is not a router issue. Other devices in the house reconnect right away with no issues (iPhone 4, PS3, Mac desktop, Dell laptop).
    I currently have BIOS 1.24, but this was happening with 1.21 and 1.23 as well. My X220 originally came with 1.16, and I haven't updated it until 1.21. Unfortunately I don't remember that far back, if the problem started occuring then.
    There was a brief discussion about this in another thread, but it went nowhere so perhaps this will get more attention. At least one other user reported the same issue.
    Here's a clip of exactly what happens. When i press the button or open the lid from sleep, the windows wifi icon will start spinning for a few seconds, then turn into an X. then only about a minute later, does it quickly connect to the wifi and I have full signal. Manually clicking on the icon and selecting the access point does not speed up the process. It will only connect when it wants to, about a minute after resuming from sleep/hibernation.
    http://youtu.be/dmboeA7HBgg
    | X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
    Solved!
    Go to Solution.

    Normally when a laptop running windows tries to connect to a network, it may also seek to identify certain components on the network, for example, asking the router "Who are you?". In your case, maybe the config are corrupted because the network address entries are messed up. Queries send out to the network come back with no replies, and the computer waited for the default time till timeout and it gives up.
    Try this one at a time, reboot, or try all at once and reboot
    TCP/IP stack repair options for use with Vista or 7.
    Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.
    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
    Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
    Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
    Reboot the machine.

  • Airport Card turned off when resuming from sleep - New since 10.6.6

    I use safe sleep regularly, as I use my laptop at both work and home. Ever since the update to 10.6.6 though, I have had to manually turn my Airport connection back on after resuming from sleep.
    Previously, although it was unreliable about connecting to a preferred network (an unrelated, but equally frustrating issue*) at least it would remain on. Now I've had to add the icon to my Menu bar just so I don't have to dig into System Preferences every single time I reawaken my laptop.
    Does anyone know why this is happening, and if there is anything I can do to prevent it? I apologize if this has been asked before, but when I searched I was unable to find anything.
    *This issue is unrelated and not the focus of my post, but if you happen to know about it I would absolutely appreciate your input.
    When resuming from sleep, despite being between 5-20 feet from my preferred router I will often receive a dialog asking me to select from a list of SSIDs and enter a password even though that information is already saved. Then, once I complete this information Airport doesn't actually connect and the only way to resolve the issue is to turn Airport off and then back on. After this, it will automatically connect with no problems and remain connected until I put the computer into Sleep mode again.

    Maybe check in your keychain and verify the password saved is correct for your wireless router?
    Do you broadcast the network name?
    Could you describe "unreliable about connecting to a preferred network"?
    Is "use secure virtual memory" checked in the Security preference pane? If so try unchecking that maybe? If it's a hibernation issue sometimes that could cause weirdness.

  • Ethernet not connecting when resuming from sleep/hibernate

    I use my mac (Win7) in clamshell mode quite often, and I leave the cables connected (ethernet, power, display, etc). I have noticed since installing the 3.0 Boot Camp drivers that the ethernet connection is not recognized after resuming from sleep/hibernate. I need to disconnect the cable and re-plug it in for the system to recognize the network. Anyone else seeing this?

    Look through Power Options for sleep and network. There should be sleep, low power, etc. And if possible, maybe you can manually update drivers from the vendor (not Apple). And if Windows or your update doesn't work as well, then you can just as easy use Device Manager and "rollback" the last driver upgrade - a great feature. Also, use those Create/Restore Check Points.
    I use to have trouble, got tired of having this issue, and bought a new modem to replace my 5 yr old model. Problem gone. Same can happen regarding routers, sometimes a firmware update, but I had one router that had been superceeded by 4th generation and no firmware patch anymore.

  • Screen flickers when resuming from sleep mode

    I have a newly brought T430 laptop with the Nvdia graphics card. Sometimes when I resume from sleep mode, the screen flickers before entering into the desktop view.
    Is this a problem or normal? I hope nothing is wrong with my gpu. Is there a way to check?
    Thanks!

    etresoft wrote:
    It is definitely not a Leopard bug because it has been happening on every portable Mac I've ever had.
    I don't agree. I had no problems at all with my MacBook Pro running Tiger. I initially did an upgrade from Tiger to Leopard and when the problems started I assumed it was a problem with the upgrade. I then completely erased and did a clean install of Leopard. The problem has actually gotten worse since I did the clean re-install.
    etresoft wrote:
    Just close the screen, wait for it to go back to sleep, then open it again. It will probably be fine.
    As I mentioned in my opening post, I've gone through that song and dance more times than I can count. I've closed it, waited for as much as an hour, opened it back up...same problem. I've hard powered it down, closed it, disconnected the AC adapter, removed the battery, opened it, held down the power button for 15 seconds, re-installed the battery, reconnected the AC adapter, pushed the power button, and the display will still be dark. It's sometimes taken as many as 5 or 6 iterations of that process before it will finally reset whatever problem it was having and boot normally with a functioning display.

  • Black screen on resume from sleep using open source AMD/ATI driver

    When waking from sleep using systemctl suspend or pm-suspend , I am presented with a black screen. I can still open programs, type, etc. but cannot see what I am doing. I usually just wind up rebooting from whatever terminal I had open, but again I can't see what I am typing. Upon reboot, the screen starts back up again. Everything else seems to resume from sleep just fine, it's just the screen that won't turn back on.
    I came from Ubuntu and had this same problem there. However, I only had this problem when using the open source xf86-video driver; when using the proprietary drivers, I was able to suspend/resume just fine. So it seems this problem is specific to the open source drivers.
    If I'm using an external monitor, my external monitor will resume just fine after waking from sleep, but the laptop screen will not.
    Googling around shows this is a common problem with AMD/ATI cards, and after a lot of attempts and failures I'm interested in knowing if anyone else has solved this problem.
    What I've tried so far (without success):
    -various quirks included with pm-utils to turn on dpms after resume
    -xrandr after resumption from sleep
    ==xrandr --output LVDS --off (If used without suspending (so while the screen still works) this seems to crash Gnome the first time around, but Gnome automatically restarts. If used a second time, it completely blanks the screen and requires a reboot)
    ==xrandr --output LVDS --mode 1600x900
    -xset dpms force on or xset dpms force off after resumption from sleep
    -vbetool dpms off and vbetool dpms on results in error message "Real mode call failed"
    -scripts using vbetool or xrandr when resuming from sleep
    -switching between virtual consoles and gnome using alt-ctrl-fn-f1 and alt-ctrl-fn-f2 keys
    My setup:
    -HP Envy dv7
    -UEFI dual-boot with Windows 8
    -AMD Radeon HD 7640G
    -xf86-video-ati 1:7.2.0-1 driver
    -Gnome DE using GDM login manager
    Thank you.
    EDIT: I did try using the proprietary drivers for a time, but found I couldn't adjust my brightness. At first I thought working suspension > adjustable brightness, but I quickly changed my mind after one night of trying to work on an unadjustable maximally bright screen.
    Last edited by broahmed (2013-11-23 02:18:57)

    Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
    Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
    John

  • Computer with Z68A-GD65 (G3) mainboard doesn't resume from sleep

    Hi,
    Recently I've been having a lot of trouble with my Z68A-GD65 (G3) / Geforce GTX 550 Ti combination, starting after Microsoft updated my graphic drivers to the latest version.
    BSOD, hangups , mouse freezes were there all the time so I did a few things to make things stable again, installing older drivers and updating the BIOS of the mainboard to the latest I could find , being 7681vP8.zip 
    After this the system became stable again, but I have this weird problem that I never had before:  sleep mode works, and most of the time it resumes, but not after a longer period of sleep, lets say a whole night....
    When I try to resume from sleep mode after a night,  the system boots but I can't see anything on the screen , the graphic card doesn't resume.
    Does anyone know what this could be?

    Matt GB, Certain aspects of OC'ing and updating software are best done manually in any case.
    Your initial disappointment reflects to an extent my own, but with a bit of testing and patience the confidence in the board returned and I am now pretty pleased with the results so far. Please check my feedback in the Beta BIOS thread after the last N31 release.
    May I suggest that you take the time and report your personal findings to MSI technical so that they can address your concerns. Just complaining about what you are unable to achieve serves absolutely no purpose at all. We are all here to contribute to finding solutions.
    >>How to contact MSI.<<

  • P35 - CPU fan reset when resumed from sleep

    Hi,
    I just got S3 sleep to work where it turns off all fans. The problem is that when it resumes from sleep, the CPU fan spins a lot faster than from boot. I've set it to run at 12,5 % as long as temps are under 65c. I'm guessing it runs at about 50 % when resuming from sleep. It does this until I restart the computer.
    Tips?
    /Edit; Just checked with SpeedFan, CPU fan normally runs at 1100 RPM, but after resume it runs at 1800 RPM. Any utility I can use that resets this to 1100 after resume?

    I ended up disabling fan control in BIOS, so that SpeedFan would work in OS. This means that CPU fan runs at 100 % until OS and SpeedFan har loaded up. Tips to fix this through BIOS or whatever are welcome.

  • Lenovo n200 - problems resuming from sleep on Win7

    Ok, so I have a 3000 series n200(the so-called ValueLine nowadays), and I just installed Win7. All good til now. Just that when I resume my laptop from sleep, the screen won't light up. All the other functions seem to start pretty good, but not the display, it remains black, no change. And I don't know for sure if it's sleep or hibernate, just that I'm pressing the power button, so this must mean sleep.
    Oh, and another thing, I cannot find the correct and up-to-date drivers and software for the fingerprint reader on this model for Win7.
    Anybody got any ideas about these 2 issues? Many thx in advance, guys!

    I had that problem on two Lenovo laptops - R500 and now T500, but I only have it when the system goes to sleep because of inactivity, when it goes to sleep on-demand everything works. Both laptops have ATI 3xxx gfx cards and I suspect that that has something to do with it. The solution that works for me is whenever it resumes from sleep with a black screen I wait for it to fully start (about 3-5 secs), then hit Fn+F4 to put it to sleep on-demand and then wake it up again via the power button. It's a long way around but it saves me from rebooting.
    Regarding the fingerprint reader, I don't know what hardware does your laptop have, but if it is AuthenTec AES 2810 you can download W7 driver from http://www.authentec.com/win7beta32.cfm. It works great and uses Windows 7 integrated Biometrics platform instead of the ThinkVantage kludge. If you have 64bit windows just replace 32 with 64 in the link URL.

  • Upon resuming from sleep, the monitor goes black

    the laptop is actually booting, but the screen flashes on for a sec then goes dark.  I can still see the screen and icon to log in, but the backlight is out, and I cannot log in actually.  if I close the lid and wait then open it again, it does it again.  I takes sometimes 5 times for it to finally stay lit and work again.  This also happens if I do a hard boot, sometimes taking up to 8 times with a hard boot.  I thought it might be related to the OS so I installed a partition and installed windows but it happens the same to windows.  It never goes out when I am working on it, only if I let it go to sleep or power it off and then try to resume or turn back on.  Any ideas?

    Fix - *Dont give your iMac a static IP*
    go to your Main or First routers settings and Give the iMac a SET IP so that it never changes. Then renew your DHCP lease and that set IP will come up and stay there. FOREVER!
    I just resumed from sleep and it is not doing it anymore.

Maybe you are looking for