Can't boot into my windows pro 64 bit dvd to do clean install

I am trying to do a clean reinstall of Windows 7 Professional 64 bit (Brazilian Portuguese) I keep getting a request to select a cd-rom type 1 or 2. Neither works.
I have researched this here and on Google. All I find are references to Mac installs and changing the bios settings.
My drives are not set to AHCI - I have boot from CD/DVD first in the boot order. I did the original install of windows 7 64 bit to this same equipment and configuration with this same official windows disk without any problems. I recently began having
problems with the system after almost two years of use - efforts to repair were not only unsuccessful they left the system almost unusable. I am running the OS on a separate partition from my data.
I was planning on booting to the Windows disk and wiping the C: partiton and reinstalling but I am being prevented by a message saying that i need to select a cd-rom boot type 1 or 2. Neither works - it just goes on to boot to the present damaged OS on my
computer. I have tried typing "3" at the message - also didn't work. While I have a backup of my D: drive data I would rather not lose it and have to try to recover that as well.
I would appreciate any help - I find it really strange that the same disk I used to install the system won't work now.

This may or may not be a BIOS related issue, I am only a user - but the Windows installation disk/system is certainly a MAJOR player in this problem. I booted to UBCD and deleted the c: drive to get rid of the old windows install (leaving the 100mb"system"
partition) and tried the boot again. Same problem with the Win 7 64 bit DVD. Except that when I entered "1" and "enter" it a "windows repair" window opened that appeared to be triggered from the 100mb "system" partition.
I shut down and, out of curiosity, I inserted the The Win 7 32 bit DVD and it booted. I cancelled the install and booted the UBCD and deleted the 100mb "system" partition and resized the c: partition and booted the 64 bit install disk again. This
time, when the boot asked for "1 or 2", I entered "1" and it booted and began the install. On the first reset it asked for "1 or 2", I entered "1" and it asked to "enter" if I wanted to boot from the cd/dvd
drive. I believe that I used "esc" and it booted from the hard drive and completed the install. Only the Windows install DVD creates this problem other bootable disks I have don't do this.
Since my original install was from the same disk to a new Hard Drive I didn't have any problem installing. My problems began with the need to reinstall, which is a VERY common problem with Windows. Once I found the workaround, which did not involve the BIOS
but "fooling" the Windows install/system on my official retail copy of Windows, I was able to reinstall.
Since I am using a very common, high end, if old, Intel board and processor I can't believe that others don't encounter these problems and I think that it begs the question to say that the problem is Intel related and to go to them for help.
Anyway, I do appreciate your taking the time to review my problem and trying to help. I have been as detailed as I could above in the hope that this will help any others who are encountering this problem. I would add that I am using Brazilian Portuguese
install disk and I suppose that this could be a solution only for similar disks. From what I have seen on this forum and the internet, it seems to be more generalized.
Thank-you again

Similar Messages

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
Thanks

Hi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can't boot into Windows 8.1 partition after apple store repair

Can't boot into Windows 8.1 partition after apple store repair
I went to the apple store about a week ago to get my screen fixed, and when I get it back I don't have an option to boot into my windows partition. The bootcamp partition is still there, but I can't boot into it. I can still see all of the files on the drive. When I try to boot into windows from the startup disc setting I get "no bootable device — insert boot disk and press any key” on a black screen. I went in for a dead pixel, and the guy at the genius bar ran something on my computer and went into disk utility application. I’m not sure what he was doing, but obviously that’s what messed up my windows partition. How can I be able to boot back into windows? Here's what disk utility looks like on my computer.

Here's the output
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b0 0e 2b |........?......+|
00000020 00 00 00 00 80 00 80 00 ff bf 2e 0f 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 05 92 d3 74 c4 d3 74 aa |...........t..t.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
Here's a better screenshot.

Can't boot into windows 7 anymore......

Hi all, I have a Mac mini late 2012 with windows7 installed through bootcamp5. It has worked flawless until recently, now I can't boot into windows anymore. I've checked in finder and the bootcamp partition is present and also all the files. Before that, I did have some trouble with my LaCie 2big thunderbolt hdd, it kept on saying I had to reformat one of the discs in the drive, but only when used in windows, in OSX there was/are no problems reading the hdd .......
Any idea of how I can make windows bootable again?, do I really have to make a fresh install of windows to make it work??
Any help is very much appreciated
Kindly
Jan

You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Can I boot into Windows XP from a firewire enclosed Hard Drive? Boot Camp

I understand you can install XP (as long as it has service pack 2 or 3) on an Intel Mac using Boot Camp, but I was wondering if it would be possible to take a HD from a PC computer which already has XP installed, and, using an firewire HD enclosure, boot the Mac into XP from that. Would this be feasible?

Yes, but not exactly. The page says:
"Can I install Windows on an external drive?
No. Installing Boot Camp on an external hard drive is not supported."
But I don't want to install Windows, I want to boot my computer into it.
It also says:
"External FireWire disks are not recognized by the Startup Disk control panel in Microsoft Windows. To start up from a bootable external drive, press and hold the Option (Alt) key while the computer starts up, then select the external disk."
I don't mind if external disks won't appear under Windows, as long as I can still boot into it.
I found another helpful post:bootcamp windows 7 Firewire external drive NTFS?
Here someone writes:
"I still use Windows XP with my Mac but still never had such a problem with my two Firewire external HDs (one FW400 and one FW800).
And I did a lot of things with these
Partioned one for use with OSX and Windows (one HFS+ partition; one NTFS partition); copied my complete MP3-collection (180GB) from one external HD to the other; etc.
All without any kind of glitch or slowdown."
So it seems this person was successful in booting XP from an external drive. Windows 7 or Vista on the other hand will encounter problems booting, which that tread explains.
In another thread (Boot camp on an external hard drive) someone wrote:
"I believe there might be a way, I just haven't gotten around to trying this out.
1) use disk utility to partition the external drive to ntfs (i think)
2) attach this disk to a pc and install the OS
3) install refit onto your mac
4) attach the drive via fw800, or even better yet esata, to you mac.
5) Start up your mac
6) choose the win xp option from the boot menu
7) install bootcamp drivers
this seems, in theory, that it should work."
So from what I gather, I think this method would probably work, I just want to know if anyone had any specific knowledge regarding this subject.
From here I only have two questions:
Is it possible to take a working drive from a PC which already has XP installed, and change the format to ntfs under OSX without damaging the drive or OS?
And, would I need a version of XP with service pack 2 or 3, or will anything do, since we are not installing it with Bootcamp, we are only running it under Bootcamp at this point.
Thanks for any help!

Can't get into the Windows Installer

So, now I'm trying to boot into the Windows installer after partitioning my drive with Bootcamp Assistant. I've used this same Windows XP CD on another Intel computer in the past, as well as a real PC without any problems. However, on my Macbook Pro is just hangs right after rebooting. I have tried removing and adding the Windows partition about 4 times now, using both Disk Utility and BootCamp Assistant to no avail. I have also tried repairing permissions using Onyx. Please, any help would be GREATLY appreciated (I would even be OK with reformatting the whole **** drive destructively if need be).

I managed to get past the cursor by chance it seems, however after the initial copying of files before installation I get an error about a missing file which I know is not missing. I give up, Im going to try a complete reformat and attempt it again
EDIT: This is the same problem I am having now: http://discussions.apple.com/thread.jspa?messageID=7809195

Can't boot into anything after EasyBCD's "Write MBR"

After upgrading my windows 8.1 install to windows 10 about a week ago (week ago), I decided that I no longer wanted the Windows/Ubuntu dual boot I had setup. So, in an attempt to delete GRUB and set the bootloader back to the windows bootloader, I downloaded EasyBCD and fiddled with it a bit before finding the "Write MBR" option. I figured that would allow me to boot directly into windows, or at least delete Ubuntu's GRUB Bootloader, so I could use one of my many windows install DVD's to set the bootloader to a windows one. Unfortunately, I'm an idiot, and after doing that, I can't boot into anything. I've tried everything I could think of or find on Google to get it to boot into absolutely ANYTHING. I've tried boot into every one of the boot options, including the main boot menu, but none of them load. instead, it shows me a loading screen that displays some mobo info as if it were loading a boot option I selected, but it hangs there. Maybe it was just taking its sweet little time right? Wrong! I let it sit for hours, still nothin'. HP has a "solution" where you hold the windows key + B for one second as you start up the pc, and it should start a bios recovery. Feeling hopeless, I tried it, hoping that it would do SOMETHING. Of course, it didn't boot into that either. Just a black screen. Finally, I learned that sometimes problems like this could be cause by hardware issues, and a lot of the times its the hard drive. I highly doubted that it was a hardware issue seeing as I bought this PC late last year (around November or December of 2014) but I removed the hard drive just in case and started my computer. Same result. FML. Can someone, anyone, help this poor idiot get his baby up and running again? I don't have the money or the confidence in their abilities to give it to Geek Squad or anyone else for that matter and let them have a go at it, so i'm depending on the internet ((

but if my PC's bootloader or something related is messed up, can the neosmart forums actually help?not trying to be rude or anything, i'm genuinely curious. you see, i cant really load anything, including any recovery disks or USB's, which is why i was hoping that there would be some sort of HP utility that could help me restore my PC back to its previous state. i'll still ask the neosmart forums though. i'm pretty desperate to fix my PC at this point!

Can I boot into a PC laptop on an iMac using Bootcamp through a eSATA to Thunderbolt connection?

Can I boot into a PC laptop on an iMac using Bootcamp through a eSATA to Thunderbolt connection? Work forces you to use their computers, but it would be nice to use an iMac and extra displays while at home.

Set up a VNC connection between the computers.
(51819)

Help when i boot into the windows 7 instal disk it freezes at windows loading files

Help when i boot into the windows 7 instal disk it freezes at windows loading files.

1. Have you tried both Alt keys - maybe your Alt key is dead.
2. Do you have wireless keyboard? Have you tried to change batteries? USB Keyboard?
3. If your Win is installed correctly then you have also installed all windows support software.
There should be Startup manager like on the Mac (next to the clock little bootcamp app or in control pannel) to restart your Mac into the Mac partition.

Can't boot Power Mac G5 up from anything (DVD, USB or HDD)

Hope someone can help me with this one
My mum has an old PowerMac G5, the dual-core 2GHz one (I can't remember what it is exactly) and it won't boot up anymore.
At first I replaced the hard drive because it was making some funny sounds... scratchy-ness.. then with the new hard drive, my dad was able to install 10.3 on it which booted up pretty reliably after reseting the SMU. Then I thought I'd replace the 10.3 installation with 10.5.8, so i tried to install it off a 10.5.8 disk just by booting into to 10.3, opening the disc and clicking the 'Instal Mac OS X' thing, then restarting. But the computer would just keep restarting to 10.3
long story short, the computer won't even turn on now. The light next to the power button doesn't come on, but the fans are on and the hard drive is alive. I've tried booting from the original 10.3 DVD, but that doesn't work either. The DVD drive spins up for like 20-30 seconds, then stops.
I've got one of these: http://www.everymac.com/images/monitor_pictures/apple_cinema_display.jpg and the power button light doesn't come on on that either.
The computer was working fine up until a few days ago.
I've reseated the RAM, reset the SMU, tried booting with C held down. Nothing seems to work.
Thanks in advance

Yeah, the monitor button turns the mac on, but once the comp is on, the light goes off and the screen stays black
I'll give it a go, but I don't believe so.

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

Can OS X Lion Run Windows 7 x64 Bit?

Hi Guys,
"Can OS X Lion Run Windows 7 x64 Bit?"
- I can see nothing in the bootcamp section that states it must be x32 bit?
... Soooo Yea...
- Dave.

Apple told me to NOT download the Boot Camp driver for Windows using the Boot Camp Assistant application in Mac OS X 10.7 Lion. I was told to download Boot Camp Software Update 3.1 for Windows 64-bit from the Apple website or use the ones that were included on the Mac OS X 10.6 disc providing they were at least version 3.1 and install those. Then I was told to run Apple Software Update to see if there were new Boot Camp drivers available and if there were to download and install them and to then run Apple Software Update to see if there was another version after that and if the was to install that one if not then I had the latest version. I take it that the latest version is 3.2 which was released 18 November 2010 since it didn't tell me about a newer version.

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine...
I tried to install driver on connecting PC, i tried to install printer as Local printer with local port - \\WIN7-32bit\HP PSC 1310 Series\ - and i got access denied, and before i reinstall Windows on 64Bit machine its worked correctly... anyone know how to solve this problem ?
*Edited*
When i connect it on 64 Bit machine printer requesting driver *.inf and not specific file...
i try to install 64bit driver on 32 bit machine in sharing options and they didn't support it...

More than likely, you are receiving the access denied error because there may not be a HomeGroup in place.
To handle networks securely with Windows 7, Microsoft took a different approach. A HomeGroup essentially creates a trust among all the devices in that home group. If a device is not in that homegroup, then that system will essentially be denied access.
Click on Install a printer on a home network to get basic steps to install a printer in a network environment.
Click on HomeGroup: recommended links to get more information about Home Groups, including setting one up.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can I boot up an intel imac running os lion from a snowleopard install disk so that I can run my old power pc software

Can I boot up an intel imac running os lion from a snowleopard install disk so that I can run my old power pc software

If the Snow Leopard install disk came with or otherwise is compatible with your iMac, you can boot from it, but that won't allow you to run software (other than the utilities that are part of the installation set). You will have to install Snow Leopard, either on a partition on the iMac's internal hard drive or on an external drive, before you will be able to run applications.
Regards.

Windows 7 upgrade: discs will include the option for a 32 to 64-bit upgrade via a clean install?

I would like to know whether the Lenovo Windows 7 upgrade discs will include the option for a 32 to 64-bit upgrade via a clean install? I called Mentor today and was told the answer is no, but I was hoping someone here could tell me differently.
If "no" is truly the answer, I would like to voice my complaint: The upgrade discs from Microsoft (i.e. the retail upgrade discs) include both the 32 and 64-bit versions, so I don't completely understand why Lenovo's upgrade program doesn't offer the same thing. I purchased my T500 in August, and back then Vista Ultimate 64 was not offered, so I chose Vista Ultimate 32 thinking that I could later upgrade to Windows 7 Ultimate 64. This assumption was based off of the info. on Microsoft's website indicating that all upgrades would contain the 32 and 64-bit versions. I even customized my computer with 4 gigs of RAM thinking that I could take advantage of the extra gig once I installed Windows 7 64.
I don't understand what Lenovo or Mentor Media have to gain by restricting a 32 to 64-bit install. I voiced this opinion to Mentor Media over the phone, who responded by saying that I should be happy since I am receiving a "free" upgrade. I don't think this is an accurate assessment for two reasons: (1) I had to pay $17.03 for shipping, and I still haven't received the upgrade and (2) The total cost of my computer was almost $3,000, and the purchase was made a mere few weeks before Windows 7 was released. $3,000 is a lot of money. I waited for the details of the Windows 7 Upgrade Program to be announced BEFORE purchasing my machine. When I finally bought my computer I accounted Windows 7 into the price I was paying. In addition, when I bought this computer I did so expecting good customer service as a given. Not providing a 64-bit upgrade without a rational explanation as to why does not qualify as appropriate customer service.
As most of you know, 4 gigs of RAM is useless with a 32-bit OS. Also, NOW Lenovo is building new T500s with the option of having Windows 7 Ultimate 64 (why wasn't Vista Ultimate 64 offered when I bought my computer???).  And the price for choosing Windows 7 Ultimate 32 is EQUAL to the price for choosing Windows 7 Ultimate 64, which proves that there is no cost difference. I just want to know what Lenovo has to gain by denying customers a 64-bit upgrade? There would really be no additional cost since as I mentioned before, Microsoft's retail upgrade includes the 32 and 64-bit OS on one disc. If anything I would think that it's costing Lenovo money to strip the 64-bit install from the upgrade discs.
Can anyone please address my problems? Do you think there is anyone at Lenovo I could contact to voice my opinions? I have been a loyal Thinkpad customer for over 5 years now, and I expect better from Lenovo. Thank you for reading!
moderator note: core question add to title, as stated in the forum rules and it will help others too answer your questions.

Daventry wrote:
Is there any way to request a 64-bit OEM? Why should Lenovo care whether I want a 32-bit or 64-bit as long as it's the same edition (Ultimate edition)?
if your system shipped with a 32-bit version of vista then you will be sent 32-bit windows 7 upgrade media.   the reason for this is two-fold.
first, because this is upgrade media, it's impossible to install a 64-bit version of windows over a 32-bit version.   doing so would require a clean installation and upgrade media simply won't allow this.   this is the case with retail media, too.   if you had 32-bit vista installed and wanted to upgrade it to 64-bit using retail media, you'd have to wipe your system or set up a dual-boot.
second, the COA (certificate of authenticity) on the bottom of your system is for vista.   because of this, your new license is of an upgrade from vista to 7.   this is how microsoft licenses it and it is their policy, not lenovo's.   microsoft's policy with OEMs is that you must install vista first, then upgrade to 7 (unless, of course, you purchased your system native with 7 on or after the 22nd).   since your original lenovo preload is of a 32-bit OS, the issue becomes circular and you'll have to refer again to the first reason.
i understand your frustration and wish this stuff were made easier for everyone.   it's repetative reading post after post of people with 4GB installed who don't understand the limitations of a 32-bit environment. i wish both manufacturers and users switched to 64-bit OSes sooner. the same thing happened when the industry went from 16-bit windows 3.11 to 32-bit windows NT4/95 and limitations went from 16KB all the way up to 4GB (which, in 1995, no one thought we'd ever exceed).   the difference is that people were complaining on BBSes over 14.4k modems instead of on GUI-based forums using broadband connections.   times sure have changed.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Can't boot into my windows pro 64 bit dvd to do clean install

Similar Messages

Maybe you are looking for