Can't Boot OS X after Win7 Install

I was running Leopard and partitioned my hard drive using boot camp. I read that you have to be running Snow Leopard to install Windows 7 with bootcamp, so that's probably the problem.
I installed windows 7 just fine but can't boot to OS X. I can't figure out how to boot from a CD either because the option key doesn't bring up anything after a restart. I wouldn't mind just installing Snow Leopard (which I have now) and starting all over again. I've tried running EasyBCD but it can't boot to OS X. Any ideas on what I can do?

You don't need to be running 10.6, but you need Boot Camp 3.0 drivers off that DVD.
Wireless keyboard? a wired keyboard is preferable and needed sometimes.
X on startup will try to boot Mac OS
Try holding C and booting from Windows 7 DVD again; or from SL DVD - and from there you can access Utility menu and Disk Utility
Step one: backup, read the pdf from Boot Camp Aasistant
I prefer cloned backups that can then boot OS X off an external drive

Similar Messages

Can't boot to any OS X Install Disk

I have a strange problem and this is going to be long. I just added a 2007 MacPro to our Apple family and am having an issue that I can not get past. First, I bought it used and the gentleman that sold it to me described what he did to prep it for me. He wanted to make sure that his data was completely gone so he performed a secure erase on all three HD. One 150GB WD Raptor 10000 and two 700 GB Segates 7500. I should mention here that this system has two DVD drives, one an Apple Super Drive, the other an LG BlueRay read write DVD. Once he did the erase, he said he was not able to reinstall because he kept getting a "can not install a lesser OS" type message. So he removed the WD Raptor and cloned it externally then replaced it.
Initially I was getting the ?folder icon on boot for a few seconds then it would seem to find the HD and boot up fine. However, any attempt to boot to any OS X install DVD results in the gray panic screen to reboot. I have the original disks to this system, which are OS X Tiger and I have a retail OS X 10.5 Leopard and neither will boot to do a fresh install.
I have done a PRAM reset and that has gotten rid of the ?folder screen. I have also booted to a Super Duper Boot Backup and performed a restore to the WD Hard Drive, repaired permissions and it boots great! Even reformated the two larger drives with disk utility and all runs extremely well. One other note... I have even been able to run Boot Camp, set up a partition on one of the large Hard Drives and successfully install Windows 7 64 bit Beta. So it does read DVDs.
But, I can not boot of any OS X install disk???? Below is a copy paste of the problem report that is generated after each failed attempt.
Any ideas????
Thu Feb 5 23:35:49 2009
panic(cpu 0 caller 0x001A407F): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000098, CR3: 0x01236000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0f21f004, EDX: 0x0f20fa24
CR2: 0x00000098, EBP: 0x50133a18, ESI: 0xffffffff, EDI: 0x50133a74
EFL: 0x00210206, EIP: 0x7c644bda, CS: 0x00000008, DS: 0x02b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x501337c8 : 0x128cdb (0x3c9a14 0x501337ec 0x131cdf 0x0)
0x50133808 : 0x1a407f (0x3cf788 0x0 0xe 0x3cefb8)
0x50133918 : 0x19ae94 (0x50133930 0xf20f804 0x50133948 0x7c6447a7)
0x50133a18 : 0x7c631bd8 (0xf21f004 0x7c7c3320 0x0 0x50133aac)
0x50133a58 : 0x7c60168c (0x0 0x50133a74 0x0 0x3c3ed4)
0x50133ab8 : 0x7c603765 (0x7c7c3320 0x0 0x68eed000 0x7bf40000)
0x50133b38 : 0x7c5fbbb3 (0x0 0x4ad9b0 0xf3000001 0x79f14000)
0x50133b88 : 0x7c5fcd1e (0xeb00800 0xedb4f80 0x0 0x0)
0x50133bd8 : 0x7c5fce30 (0xeb00800 0xef08500 0x6062213c 0x0)
0x50133c18 : 0x60627155 (0xeb00800 0x1 0x0 0x0)
0x50133c78 : 0x60621065 (0xeb00800 0x5 0x5 0xeb00800)
0x50133c98 : 0x38a1a9 (0xeb00800 0xe998a08 0xe998a08 0x0)
0x50133ce8 : 0x3b032a (0xeb00800 0xe998a08 0xe998a08 0x0)
0x50133d48 : 0x18d624 (0xeb00800 0xe998a08 0x0 0x0)
0x50133db8 : 0x12b498 (0xf223680 0xf196498 0x50133df8 0x11e03b)
0x50133df8 : 0x124af1 (0xf223600 0xe965340 0xf1fa480 0x0) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.3.8)@0x7c5fa000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
dependency: com.apple.iokit.IONDRVSupport(1.4.4)@0x68b33000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
Kernel version:
Darwin Kernel Version 8.7.3: Wed Aug 16 18:54:06 PDT 2006; root:xnu-792.11.5.obj~1/RELEASE_I386

jravin wrote:
I have a strange problem and this is going to be long. I just added a 2007 MacPro to our Apple family and am having an issue that I can not get past. First, I bought it used and the gentleman that sold it to me described what he did to prep it for me. He wanted to make sure that his data was completely gone so he performed a secure erase on all three HD. One 150GB WD Raptor 10000 and two 700 GB Segates 7500. I should mention here that this system has two DVD drives, one an Apple Super Drive, the other an LG BlueRay read write DVD. Once he did the erase, he said he was not able to reinstall because he kept getting a "can not install a lesser OS" type message. So he removed the WD Raptor and cloned it externally then replaced it.
Initially I was getting the ?folder icon on boot for a few seconds then it would seem to find the HD and boot up fine. However, any attempt to boot to any OS X install DVD results in the gray panic screen to reboot. I have the original disks to this system, which are OS X Tiger and I have a retail OS X 10.5 Leopard and neither will boot to do a fresh install.
I have done a PRAM reset and that has gotten rid of the ?folder screen. I have also booted to a Super Duper Boot Backup and performed a restore to the WD Hard Drive, repaired permissions and it boots great! Even reformated the two larger drives with disk utility and all runs extremely well. One other note... I have even been able to run Boot Camp, set up a partition on one of the large Hard Drives and successfully install Windows 7 64 bit Beta. So it does read DVDs.
But, I can not boot of any OS X install disk???? Below is a copy paste of the problem report that is generated after each failed attempt.
Any ideas????
Thu Feb 5 23:35:49 2009
panic(cpu 0 caller 0x001A407F): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000098, CR3: 0x01236000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0f21f004, EDX: 0x0f20fa24
CR2: 0x00000098, EBP: 0x50133a18, ESI: 0xffffffff, EDI: 0x50133a74
EFL: 0x00210206, EIP: 0x7c644bda, CS: 0x00000008, DS: 0x02b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x501337c8 : 0x128cdb (0x3c9a14 0x501337ec 0x131cdf 0x0)
0x50133808 : 0x1a407f (0x3cf788 0x0 0xe 0x3cefb8)
0x50133918 : 0x19ae94 (0x50133930 0xf20f804 0x50133948 0x7c6447a7)
0x50133a18 : 0x7c631bd8 (0xf21f004 0x7c7c3320 0x0 0x50133aac)
0x50133a58 : 0x7c60168c (0x0 0x50133a74 0x0 0x3c3ed4)
0x50133ab8 : 0x7c603765 (0x7c7c3320 0x0 0x68eed000 0x7bf40000)
0x50133b38 : 0x7c5fbbb3 (0x0 0x4ad9b0 0xf3000001 0x79f14000)
0x50133b88 : 0x7c5fcd1e (0xeb00800 0xedb4f80 0x0 0x0)
0x50133bd8 : 0x7c5fce30 (0xeb00800 0xef08500 0x6062213c 0x0)
0x50133c18 : 0x60627155 (0xeb00800 0x1 0x0 0x0)
0x50133c78 : 0x60621065 (0xeb00800 0x5 0x5 0xeb00800)
0x50133c98 : 0x38a1a9 (0xeb00800 0xe998a08 0xe998a08 0x0)
0x50133ce8 : 0x3b032a (0xeb00800 0xe998a08 0xe998a08 0x0)
0x50133d48 : 0x18d624 (0xeb00800 0xe998a08 0x0 0x0)
0x50133db8 : 0x12b498 (0xf223680 0xf196498 0x50133df8 0x11e03b)
0x50133df8 : 0x124af1 (0xf223600 0xe965340 0xf1fa480 0x0) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.3.8)@0x7c5fa000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
dependency: com.apple.iokit.IONDRVSupport(1.4.4)@0x68b33000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
Kernel version:
Darwin Kernel Version 8.7.3: Wed Aug 16 18:54:06 PDT 2006; root:xnu-792.11.5.obj~1/RELEASE_I386
I just did a check as you where smart & put what your problem was telling you
You had shown your Mac is Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.3.8)@0x7c5fa000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
dependency: com.apple.iokit.IONDRVSupport(1.4.4)@0x68b33000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
com.apple.iokit.IOGraphicsFamily(1.4.4)@0x60619000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x6042e000
That Tell's me 100% you do have the same card the
_*(PCI Card: NVIDIA GeForce 8800 GT, display, Slot-1)*_
that needs OS X 10.5.2 or newer to boot from the install DVD. I went though this man, by myself is was not fun call 800-69-2773 (800-MY-Apple) ask for costumer care tell them it is the Old OS & newer GPU not the Mac Pro, So they can't try to say you need Apple Care for what in truth they never told people. I know you will get a replacement Mac OS X Leopard Install DVD 10.5.2 or newer it is white & has Replacement DVD Not For Resale on it.
I am give you my Email if needed at all in this (I know what a mess it is)
hess2 at mac dot com
Hope I helped you,
Thomas
*PCI Card: NVIDIA GeForce 8800 GT, display, Slot-1*
<Edited by Moderator>

HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

Yes, purchase Paragon Camp Tune for the job.

[SOLVED]Can pacman provide some sound after finishing installing

I usually let pacman download and install something in a screen and working on another screens. But I can't know immediately when the instalI finished if I don't return to the screen where pacman is installing something.
Can pacman provide some sound after finishing installing? Or are there any other methods are suitable for this? And I guess tools like wget or axel may need this.
Last edited by ArkChar (2012-12-05 06:30:35)

You probably can make a script that wraps pacman, and plays a sound (ffplay, ffmpeg, mplayer, aplay, whatever) and plays a sound when pacman returns. Better than nothing I guess.
Something like this:
pacmansound
#!/bin/bash
pacman $@
ffplay ~/Music/pacman_done.ogg
I'm not sure if this works, but you get the idea.

Can i adjust the boot camp partition after xp install

can i adjust the boot camp partition after xp install

Hi,
Paragons CampTune http://www.paragon-software.com/home/camptune/ can do this.
Mac OSX and its BootCamp Assistant or Windows cannot.
Regards
Stefan

Can't boot G5 even from OS install disk. Help?

I've trolled the message boards 25 pages deep and searched all the "Can't boot my G5" threads and still haven't found anyone describing what my machine is doing so thought I'd start a new thread in the hopes someone can help me out.
Ok I have a G5 dual processor machine. (Power PC chip, not Intel) Things went bad when I tried to do an Archive and Install of Leopard (OS 10.5) The install looked as normal until I got to one minute left on the install. At that point the install never progressed. I thought maybe it was doing some behind the scenes processing and decided to leave it over night. The next day my machine was still hung on that One minute left. So obviously it was a failure. Of course now the problem is I have an install that never completed of the OS and so that partition is, I assume, unbootable. Wiped away the Tiger OS and did a 99% install of Leopard. So I had to shut down by holding the power button.
I think to myself, "No worries I can just boot from my 2nd partition holding down the Option key to select it on the boot up screen". I always keep a partition with an OS on it for times like these. So I reboot, hold option key, select my other partition, things look OK. I get the grey screen with the Apple logo and I get the wheel animation turning. (Not beachball of death but the typical circular, almost sun ray configuration thing) At this point, usually the screen will go black for a moment before the desktop loads. However, in my case once the screen goes black after the load screen, it stays black. Now let me say the monitor does NOT turn off. There is a definite difference when I manually turn the monitor off. When off it's truly black. But this is like a power on black, not true black. (If you need me to explain this better feel free to ask me to clarify)
So the untouched, pristine Tiger partition boot is a No Go. I figured I'd then give up on trying to put Leopard on my desktop machine (I use it on my laptop) and reinstall the original OS and system software from the system disk that came with my G5. I boot machine holding down eject button, place the disk in, close the drive door and shut down again by holding power button. Reboot holding C key and the same routine happens with booting from the disk. Gray Apple logo screen, sun ray circle moving, screen goes black on the attempted transition to desktop .. but stays black. I also tried booting with my Disk Warrior disk to no avail. Same thing happens. (Also tried booting from disks by selecting them manually from booting with Option key down) At first I wondered if it was a monitor issue. That maybe my desktop was up but there was an issue with the signal being passed to the monitor on the resolution jump. Thought perhaps hitting the Eject key on the keyboard when I had attempted to boot from the partition (not from disk on this test) would tell me if it was a monitor issue. If it was a monitor issue, the disk tray should open. But alas, no.
So since I cannot boot normally from any partition or disk I decided to boot into single-user mode.
I did the fsck -fy thing and it told me everything was ok. I had also previously installed applejack and I ran that and short of correcting a few permissions and dumping some unneeded caches it came back with a system OK.
At my wits end I booted into target disk mode and ran Disk Warrior on both the original half installed OS partition and the back up emergency boot up partition from my laptop. Again, everything OK. Hoped against hope that I could actually install an OS onto my G5 from my laptop but I was only given the option of being able to do it from my laptop with the Leopard disk and it would only allow me to do it if I used Disk Utility to completely format that drive first. No, thanks.
Re-attempt to boot G5. Failure. So now I turn to hardware. Disconnected everything beside the keyboard and mouse. Try again. Fail. Pulled a couple sticks of Crucial memory out of the machine and left the stock RAM. No dice. Pressed the small power unit reset button under the RAM slots. No change. Zapped the PRAM. Still nothing. Try to boot in Safe mode holding down shift key. Doesn't work.
It seems to me if I can't even get the machine to boot from the Install disk that there is something going on that is much more major than software issues.
Bad motherboard? Any ideas? Because I'm all out of ideas.

Brother, Sound74, I thought I was the only one pulling the hair out of my chest one by one the past two days. Your situation is very similar to mine, and I'm just as clueless as you are. I started getting kernel panic screens, then nothing on boot, until finally I brought it to the local genius bar. They ran all the usual software/hardware tests, updated Tiger to 10.4.11, recommended I buy Leopard and do an erase-install. My computer, of course, was working absolutely fine by this point. I bought Leopard, came home, backed everything up, then tried to install the new OS. Like in your case, it just up and quit half-way through. Screen went black and a "No DVI Signal" message came on my display (it does this when I turn it on without first turning on the computer).
So I thought, well, maybe it takes a really long time to erase-install, and the monitor is just waiting for things to kick back in. I've always upgrade-installed before, so I couldn't tell if this was normal or not. But about half an hour later, my fans kicked in so fast I thought I had a P-51 Mustang taking off in my studio. I waited a bit more and finally force-shut-down my system. Not knowing what to expect, I nervously tried to re-boot.
Nothing. Zip. I can't safe boot, I can't boot from the installer disc, etc. The only thing I can do is the option-key thing whereby you choose the startup disc. And of course, it only gives the Leopard install disc as an option, because now the entire HD has been erased! But when I choose the Leopard disc, of course it doesn't work.
So I have a nice $3000 paperweight sitting in my studio. I guess I'll have to bring it back to the Mac store, where if it costs more than $300 to fix, I'm going to say screw it and put that dough toward a new iMac.
Sorry I couldn't provide any helpful info, but I just wanted you to know you're not alone in suffering the slings and arrows of outrageous technology.
Keep me posted on any solutions you discover, and I'll do the same.
Noochy1
PS My applecare expired a month ago! AAAAARRRRGGGHHHH!!! **** Murphy and his stupid laws.

[Solved] Can't boot into Arch after deleting some partitons

About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
I can chroot into Arch and did the following -
grub> find /boot/grub/stage1
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
ed
Done.
grub>
The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
title Arch uuid
#root (hd0,5)
uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
intrd /boot/kernel26.img
title Arch hd
root (hd0,5)
kernel /boot/vmlinuz26 root=/dev/sda6
intrd /boot/kernel26.img
I have a bootinfo script which gives the following (from the chroot environment) -
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
sda6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
mount: /dev/sda6 already mounted or sda6 busy
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
/dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
/dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
/dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
/dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
/dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
/dev/sda4 * 63 417,689 417,627 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
/dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
/dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
/dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
/dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
/dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
/dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
/dev/sda: PTTYPE="dos"
/dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda12 / ext3 (rw,commit=0)
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1 = swap
/dev/sda1 none swap sw 0 0
# /dev/sda3 = root
#UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
/dev/sda3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda4 = boot
# UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
/dev/sda4 /boot ext3 relatime 0 2
# /dev/sda5 = home
# UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
/dev/sda5 /home ext3 relatime 0 2
#/dev/sda6
#UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
/dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
# /dev/sda7
# UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
/dev/sda7 /var ext3 relatime 0 2
# /dev/sda8
/dev/sda8 /opt ext3 relatime 0 2
# /dev/sda10 - Arch
/dev/sda10 /mnt/arch ext3 relatime 0 2
# Not sure what this is doing here
# Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
# /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /dev/sde1
# uuid appears to be 644406B3570C1846 -> ../../sde1
#/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
#1TB-01
UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-02
UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-03
UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 750GB-02 ext3 Partition
# UUID giving problems, trying with dev
# UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
/dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
============================= sda4/grub/menu.lst: =============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-26-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-22-generic
title Ubuntu 10.04.1 LTS, memtest86+
root (hd0,3)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
============================= sda4/grub/grub.cfg: =============================
# DO NOT EDIT THIS FILE
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-26-generic ...'
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-24-generic ...'
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-23-generic ...'
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-22-generic ...'
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-22-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch Linux (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26.img
menuentry "Arch Linux Fallback (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26-fallback.img
#### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# From Arch grub menu.lst
# (0) Arch Linux
#title Arch Linux [/boot/vmlinuz26]
#root (hd0,0)
#kernel /vmlinuz26 root=/dev/sda3 ro
#initrd /kernel26.img
#Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
(hdX,Y)/grub/linux.mod).
#This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
#An example, booting Arch Linux:
#set root=(hd0,5)
#linux /boot/vmlinuz26 root=/dev/sda5
#initrd /boot/kernel26.img
#boot
###menuentry "Arch1" {
###insmod ext2
###set root='(hd0,10)'
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
ID
###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch2" {
###insmod ext2
###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch3" {
###insmod ext2
###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
### END /etc/grub.d/40_custom ###
=================== sda4: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.32-22-generic
.0GB: initrd.img-2.6.32-23-generic
.1GB: initrd.img-2.6.32-24-generic
.1GB: initrd.img-2.6.32-26-generic
.0GB: vmlinuz26
.0GB: vmlinuz-2.6.32-22-generic
.0GB: vmlinuz-2.6.32-23-generic
.1GB: vmlinuz-2.6.32-24-generic
.0GB: vmlinuz-2.6.32-26-generic
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
[/quote]
Output of fdisk -l from chroot is -
[quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000b084
Device Boot Start End Blocks Id System
/dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
/dev/sda2 25414954 1465144064 719864555+ 5 Extended
/dev/sda3 6554520 25414829 9430155 83 Linux
/dev/sda4 * 63 417689 208813+ 83 Linux
/dev/sda5 25414956 1360287809 667436427 83 Linux
/dev/sda6 1360287873 1423198349 31455238+ 83 Linux
/dev/sda7 1423198413 1465144064 20972826 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00025bd3
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953523711 976760832 83 Linux
I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
List of all partitions:
No filesystem could mount root, tried:
Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
I am really lost as to what is going on, which I'm sure is evident.
Thanks a lot
belbo
Last edited by belbo (2011-08-12 13:31:23)

Hi. Unfortunately that didn't help.
So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
[2011-08-08 23:32] ==> Image generation successful
[2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic.
Pacman.log relating to the new kernel package below -
[2011-08-09 00:22] Running 'pacman -Suy'
[2011-08-09 00:22] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:23] Running 'pacman -Suy'
[2011-08-09 00:23] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:26] removed python-mygpoclient (1.5-1)
[2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
[2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
[2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
[2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
[2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
[2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-09 00:26] ==> Building image from preset: 'default'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [autodetect]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-09 00:26] 7079 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] ==> Building image from preset: 'fallback'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-09 00:26] 23360 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] installed linux (3.0.1-1)
I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
If anybody has other ideas I'd really appreciate it.
If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
Any assistance greatly appreciated.
Thanks
belbo
Last edited by belbo (2011-08-08 23:17:49)

IMac won't boot OsX Partition after Bootcamp install/uninstall.

Hello,
I have bought 2 late 2012 21.5 iMacs last year and have used both the same way. Here is what happened with one of them recently.
Fisrt af all I've installed bootcamp 1 year ago in both iMacs without issues and was ok so far, and was using exclusively Windows 7 partition. The trouble iMac started with some startup issues during boot/reboot (screen was frozen with green/grey horizontal lines), but worked fine after following manual start up.
Lately I've been trying to boot from OsX partition and it freezes in the apple logo every time.
I have already done the SMC / PRAM procedures, without success.
I have tried to download and do a fresh OsX install (Mountain Lion, Mavericks and Yosemite). Can't boot from Mavericks / Yosemite flash drive install (both freeze at apple logo - horizontal lines), and only had partial success with one Mountain Lion 10.8.5 flash drive install that booted all right and the first part of the installation process was ok, but after the initial reboot, it happened to freeze the same way before.
The iMac failed to boot in safe mode (stops booting at 25% and then freezes on apple logo), and show no issues with AHT tests.
I can boot in single user mode, but it reboots after a few seconds. I noticed some errors messages during this boot.
It fails to boot in verbose mode, showing a few lines of errors (images attached), and then freezes in a green horizontal line screen.
I can still boot from Bootcamp flash drive and Ubuntu Flash drive, and install both OS. The only issue is with OsX itself. I have used Gparted in Ubuntu to Format the hole partition to HFS+, and can't find any errors in hard drive tests.
I thought about buying a thunderbolt cable and try to do a Clone of my other iMac, but don't know if it will work.
Any other tests/suggestions about this issue?
Regards,

Fixed the problem with this setup
Of course this means i just lost 4GB.
Let me tell the full story.
In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Can't boot from Recovery or USB Install Drive

Hi Folks,
My (mid-2011) MacBook Pro [Mavericks (10.9)] is not booting up – not matter what I try.
I've tried booting into Recovery (using command-R), Internet Recovery, and tonight I finally created a bootable USB install drive – no luck there either (pressing option to get to the startup disk manager). I can select which drive I want to boot from, but after selecting the USB drive and clicking on the arrow, I get to the gray apple screen (with the spinning progress wheel), and then it just stalls on a blank light gray screen (and the fans spin up). I've waited up to 45 minutes in this state, still nothing.
The same thing happens when I try to boot normally. I have Filevault 2 enabled, so I get to the user account screen – but after selecting my account, the machine goes from the gray apple startup screen to the blank gray screen and hangs.
I've tried resetting the NVRAM, booting from an install CD, etc., etc., and nada.
Does anyone have any advice where to go from here? I had hoped the USB install drive would be the answer, but for whatever reason, I'm simply having no luck. Any help would be greatly appreciated – this is my main rig and I can't afford to have it down for much longer…
Thanks so much!

What install "CD"?? (sure it's not a DVD disc) did you try.
Not sure it is related to the Filevault system but if you can't get the Recovery HD partition to boot that may be caused by having Filevault enabled.
Have you tried the Real Online Internet Recovery system? Hold down the Command + Option/Alt + r keys at startup and keep holding them down until you see a globe on the screen. If after you see the globe, or you never get a globe on the screen, and you get that same Grey color on the screen then you more than likely have a hardware problem. You should make an Appointment with your local Apple store Genius Bar for your Mac to be properly diagnosed.

Hardware missing after win7 install

The following is the information about my Laptop:
OS Name            :    Microsoft Windows 7 Ultimate
Version            :    6.1.7600 Build 7600
Other OS Description    :     Not Available
OS Manufacturer        :    Microsoft Corporation
System Name        :    USER-PC
System Manufacturer    :    Hewlett-Packard
System Model        :    Compaq Presario V3780TU
System Type        :    X86-based PC
Processor        :    Intel(R) Core(TM)2 Duo CPU     T5550 @ 1.83GHz, 1833 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date    :    Phoenix F.2A, 25-03-2008
SMBIOS Version        :    2.4
I initially had vista, but the laptop got dead slow and unresponsive, used to show BSOD (blue screen of death) often, used to restart and got heated beyong measure. So I switched over to win7. However, after the install, i found the following unknown devices on my computer.
PCI bus 8, device 9, function 3:
PCI\VEN_1180&DEV_0592&SUBSYS_30CD103C&REV_12
PCI\VEN_1180&DEV_0592&SUBSYS_30CD103C
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
(Ricoh Memory Stick Controller)
PCI bus 8, device 9, function 2
PCI\VEN_1180&DEV_0843&SUBSYS_30CD103C&REV_12
PCI\VEN_1180&DEV_0843&SUBSYS_30CD103C
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
(Ricoh SD/Host Controller)
PCI bus 8, device 9, function 4
PCI\VEN_1180&DEV_0852&SUBSYS_30CD103C&REV_12
PCI\VEN_1180&DEV_0852&SUBSYS_30CD103C
PCI\VEN_1180&DEV_0852&CC_088000
PCI\VEN_1180&DEV_0852&CC_0880
(Ricoh xD-Picture Card Controller or Ricoh xD-Picture Card Host Controller;0852h xd picture card controller)
unknown device on Microsoft ACPI-Compliant System
ACPI\HPQ0007
*HPQ0007
(most probably quick launch buttons driver, though not sure)
With win7, my lappy runs smoothly but the problem somehow is not completely over as sometimes the boot fails, esp if I install any new software; maybe missing drivers are causing problems. If any of you happen to know where I could find their respective drives suited (as to my system), please let me know! I looked, but was not quite that confident so i asked. Kindly help.
Thanks

Hi:
Should be no problem to install the Vista drivers for the 1180 devices:
The 1180's are your missing card reader drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-54958-1&cc=us&dlc=en&lc=en&...=
The ACPI is probably your QLB like you suspected but, you need to run the Windows 7 version of the QLB's.
Try these off a HP 6910p business notebook: I am giving you the link to the oldest version of W7 drivers for them.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul

Can't boot os x after bootcamp

Hello.
The problem:
Yesterday I installed windows 7 on my early 2009 (mavericks) mac pro via boot camp.
I have three HD in my mac. One for os x, one for documents, and one for the windows. Before I start bootcamp I formatted my HD into NTFS for Win.
I run the bootcamp and everything went well, until the standard windows partition screen show up. I select the "bootcamp" HD, but i only can continue the installing if I format the hard drive.
The Win7 run well, but now I can't boot into os x.
When I hold down "options", only the windows appear as a selectable option.
I installed bootcamp on windows manually (4.0.4033 according to Boot Camp: System requirements for Microsoft Windows operating systems)
when I try to restart to osx the bootcamp say "there is no bootable volume".
i only see the "bootcamp" HD, and I can't treat the other two.
What I tried
Resetting NVRAM and PRAM
Holding down various key combinations (Options, Command + R, Options + R)
When I take out the "Machintos hd" a flashing folder pic appears.
I don't have the installation disk for os x, and I don't want to uninstall the os x..
There is any solution for my problem?

1. How many physical drives do you have in the MacPro?
2. Was Windows and OS X installed on the same physical drive?
3. In the case of the Tower MacPro with more than one drive, all drives that are not intended for Windows use must be physically removed from drive bays, before Windows is installed.
4. If you cannot see OS X, use an external disk (Firewire or USB with 16GB or more) and install a fresh copy of OS X and both you MacPro and the the disk with Windows can be corrected, if possible.
5. OSX re-installation leaves you files intact, unless you tell the OS X Installer to erase the designated drive.
6. Step 4 can also uses a USB flash drive, if necessary.
The error message is because a drive which was present when Windows was installed (it is stored in the BCD for W7/W8 or boot manager/loader)is no longer available. It is complaining about it.
If you put this drive back, can you boot into Windows successfully? If yes, can you post a screen shot of Control Panel -> System -> Administrative Tools -> Computer Management -> Disk Management.

Can't boot into anything after EasyBCD's "Write MBR"

After upgrading my windows 8.1 install to windows 10 about a week ago (week ago), I decided that I no longer wanted the Windows/Ubuntu dual boot I had setup. So, in an attempt to delete GRUB and set the bootloader back to the windows bootloader, I downloaded EasyBCD and fiddled with it a bit before finding the "Write MBR" option. I figured that would allow me to boot directly into windows, or at least delete Ubuntu's GRUB Bootloader, so I could use one of my many windows install DVD's to set the bootloader to a windows one. Unfortunately, I'm an idiot, and after doing that, I can't boot into anything. I've tried everything I could think of or find on Google to get it to boot into absolutely ANYTHING. I've tried boot into every one of the boot options, including the main boot menu, but none of them load. instead, it shows me a loading screen that displays some mobo info as if it were loading a boot option I selected, but it hangs there. Maybe it was just taking its sweet little time right? Wrong! I let it sit for hours, still nothin'. HP has a "solution" where you hold the windows key + B for one second as you start up the pc, and it should start a bios recovery. Feeling hopeless, I tried it, hoping that it would do SOMETHING. Of course, it didn't boot into that either. Just a black screen. Finally, I learned that sometimes problems like this could be cause by hardware issues, and a lot of the times its the hard drive. I highly doubted that it was a hardware issue seeing as I bought this PC late last year (around November or December of 2014) but I removed the hard drive just in case and started my computer. Same result. FML. Can someone, anyone, help this poor idiot get his baby up and running again? I don't have the money or the confidence in their abilities to give it to Geek Squad or anyone else for that matter and let them have a go at it, so i'm depending on the internet ((

but if my PC's bootloader or something related is messed up, can the neosmart forums actually help?not trying to be rude or anything, i'm genuinely curious. you see, i cant really load anything, including any recovery disks or USB's, which is why i was hoping that there would be some sort of HP utility that could help me restore my PC back to its previous state. i'll still ask the neosmart forums though. i'm pretty desperate to fix my PC at this point!

Can't open itunes,even after un-installing and then re-installing!

I keep getting the following error message when trying to open itunes on my pc.
'The folder "itunes" cannot be found or created, and is required.The default location for this folder is inside the "my music" folder.'
This error message appeared even after un-installing and re-installing itunes.
I conducted a search for the 'my music' folder,and it came up with nothing.
Please help!

If you truly don't have a folder named C/......./My Music, there are bigger problems with that PC.
That folder is a default windows XP folder and should be there.
The file extensions setting is easy to change. Win Explorer > Tools > Folder options
http://www.fileinfo.com/help/windows-show-extensions.html
If your music folder really doesn't exist, see if you can do the shift-start and CREATE a new library. It will be blank, but at least that will tell us if itunes can even start. It will NOT run without an ITL library file.

Can I remove Adobe 9 after I installed 11.2?

Can I remove Adobe Reader 9 after I installed XI?

You shouldn't have two different versions installed anyway - so yes. You may find it best to uninstall both, then put Reader XI back.

Can't Boot OS X after Win7 Install

Similar Messages

Maybe you are looking for