Can't boot snow leopard from external drive

I have a copy of snow leopard installed on a separate usb hard drive which I use to run some PowerPC programmes under rosetta. I can attach this USB drive to my Mac Pro and also to an Intel Macbook and choose to start up on this external drive without any issues. However when I try restarting my new 2011 iMac on this external usb drive the machine crashes every time with a kernal panic. Is this problem unique to me or does everyone else have this issue with new iMacs. Mine is a 27" 3.4ghz i& with 12ghb ram installed running 10.72. Is their soemthing I can do to resolve this problem?

I have now solved the problem of being able to boot from either Snow Leopard or Lion on a new Mid 2011 iMac. This is how I did it.
1. Attach an external USB drive to an earlier Mac or borrow one from a friend. In my case I used my 2009 Unibody Macbook (which has Lion installed on it but does allow you to install Snow Leopard on an attached device) Put the Snow Leopard install disc in this machine and tell it to install Snow Leopard on your attached USB Drive.
2. Start up the Macbook (or whatever machine you are using) and get it to restart on the attached USB drive so that it boots up in Snow Leopard. Then when Snow Leopard is up and running on the attached external drive, do a software update to bring it up to 10.68 (the current version). This step is important as I found that if I plugged in the external USB drive into the iMac with only operating system 10.6 installed it would cause a kernal panic on start up when I choose to start up on the external USB drive.
3. With Snow Leopard updated to system 10.68 you can now plug it into your iMac and restart the iMac booting into Snow Leopard from the external USB drive. You do this by either going to System Preferences>Startup disk and choosing the external drive, or by holding down the option key when you restart your Mac and choosing the external USB drive.
4. The next step is to make your iMac dual boot now that you know it can run Snow Leopard successfully from an external USB drive. To do this, go into Utilities>Disk Utility and select your main drive. Select the main disk (with Lion on it)  and then choose Partition and choose 2 Partitions. Drag the first partition bundary line down to make the second partition size as small as possible. In my case I had a stock 1TB drive and the smallest partition size it would allow me was 70gb. Create the second partition (assuming you have spare space on your drive to allow this to happen). This will then create a second hard drive icon on your desktop. I renamed mine "Snow Leopard startup".
5. Download the free (and excellent) utility Carbon Copy Cloner and use it to copy your Snow Leopard operating sytem from your attached USB external drive to your new partition.
6. That's it! Now you can choose to start up your iMac from either Lion or Snow Leopard using either method mentioned in 3 above.
7. As a final step I suggest your install your Rosetta only programmes in your new Snow Leopard partition so that you can access them easily and keep them all together.

Similar Messages

  • Can't boot Snow Leopard from USB drive made in Yosemite

    Hi all,
    I have a brand new macbook pro running Yosemite, but some of the software I have will only run in Snow Leopard.
    Running Snow Leopard as a Virtual Machine has been clunky, so I wanted to try an alternative and install Snow Leopard onto an external HD and work from that.
    I got hold of the Snow Leopard dmg file and created a bootable USB thumb drive (I did this within Yosemite) to try to install it onto the external HD. I used the instructions here:
    http://www.maciverse.com/installing-snow-leopard-onto-an-external-hard-drive.htm l
    But when I restart the computer and try and boot from the USB drive, I just get the grey background with dark grey apple symbol, indefinitely. The installation process never commences.
    What am I not doing right?
    Thanks in advance for any insights.

    You can only do what you are trying from a model that can be booted into Snow Leopard. You have a 2014 model that can only be booted by Mavericks or Yosemite. You cannot run Snow Leopard on your machine except in a VM or a Mac from 2010 or earlier.

  • Cannot boot Snow Leopard from external FireWire drive

    I use a Western Digital My Passport Studio 500 GB external drive to back up my MacBook Pro with Time Machine. I had created a 30 GB Leopard boot partition with various utilities and tools; since the small drive goes wherever the laptop goes, I figured it might come in handy to be able to boot the computer in the event something went wrong with its internal 250 GB drive.
    Over the weekend, I upgraded the external drive to Snow Leopard, and now it can no longer be used to boot the laptop. The symptoms are truly weird. Holding down the Option key while rebooting does not show the external drive unless I disconnect and reconnect the FireWire cable. The drive then shows up. I select it, and it appears to begin to boot, then it just sits on the gray screen with the little round thingie turning for a long time (five to ten minutes). Eventually, the system boots from its internal drive. This happens regardless of whether I'm connected by means of FireWire 400 or 800.
    After spending a lot of time looking at the usual suspects (cables, permissions, PRAM, etc.) I reinstalled Sand Leopard (OK, 10.5) and lo and behold, the drive boots again (though for some reason I still have to go through the disconnect/reconnect routine). Clearly, something in the OS has changed with respect to the way booting from external drives is handled.
    On the positive side, I have none of the symptoms described in other threads: Time Machine works flawlessly, and both the boot partition and the Time Machine partition appear on the Snow Leopard desktop every time I connect the drive.
    Does anyone have the same issues? Does anyone know of a workaround?
    Thanks,
    Daniel

    Hi,
    Working from a MacBook Pro 2.4 (Santa Rosa) with 4gb ram, running OS 10.5.7-
    (All external HDs are 7200 rpm)
    Shortly after our fresh install of Snow Leopard onto a new but already tested External 1.5 Seagate Barracuda (with the most current firmware), in an OWC Mercury Elite enclosure-
    We installed Snow Leopard smoothly to that external HD without any issues, and it booted up from that 1.5T external HD, and worked fine.
    Then, still working from the MacBook Pro, I turned on and booted another external HD (a Newertech Guardian Maximus RAID running 10.4.11 via FW800, daisy chained to the 1.5T External with Snow Leopard newly installed.
    Again that's MacBook Pro <FW800> Snowy external HD <FW800> 10.4.11 RAID (booted & working from the RAID).
    But when I tried to bootup up Snow Leopard, after doing the work on the 10.4.11 RAID-
    It would not boot up.
    Though Snowy would appear as an available Start Up disk, each time it was selected as the Boot drive,
    the Internal HD OS 10.5.7 booted instead.
    I changed around the cables and tried repeatedly.
    Same result, no Snowy boot.
    Even after the OS 10.4.11 external RAID was power down, and disconnected.
    After some looking around, I found this forum:
    http://discussions.apple.com/thread.jspa?threadID=2136208&tstart=0
    Got me thinking.
    I tried the USB, and it booted !
    I tried the FW400, and it booted !
    And mysteriously, at this point- I tried the FW800, and it booted !
    And then, the MBP boots seemed to reliably boot from that external, via FW800.
    Bizarre.
    Snow Cat needs to be taught originally how to find FW800 from the bottom up ?
    Turns out, Snow Leopard doesn't like booting,
    if the preceding boot was on the 10.4.11 RAID, and work was done with programs there.
    So, once again, I repeated this process:
    After working with programs on the 10.4.11 external HD,
    the MBP would not boot the Snow Leopard external HD,
    it defaulted to booting from the MBP internal HD OS 10.5 via FW800.
    even though Snowy was selected for Start Up.
    This was the case repeatedly.
    (It would also boot from the 10.4.11 external RAID, if it were selected for Start Up.)
    (In each of these tests below, I only rebooted the computer at each test. I did no work with programs on the various HDs.)
    SO, once again, at this point of the process:
    I plugged in that Snowy external HD via FW400,
    and it booted up fine !
    Then I booted up from the Internal 10.5, and tried to boot Snowy via FW800 again.
    It worked !
    Then I turned on the 10.4.11 RAID external HD, and tried to reboot from the Snowy external HD.
    It worked too !
    Then I booted from the 10.4.11 RAID, it came up fine.
    Then booted from the Snowy, it came up fine.
    Then booted from the Internal HD 10.5, it came up fine.
    Then booted from Snowy again, it came up fine.
    Then I turned off the 10.4.11 HD, booted from Snowy, it came up fine.
    Then booted from the Internal, it came up fine.
    Then tried Snowy one last time, it came up fine.
    Anyway, the issue is:
    It works fine-
    Except when I do work within the programs on the 10.4.11 external RAID.
    Then I have to use FW400 or USB to get it to boot once again . . .
    Regardless of whether the other external HD is removed from the system.
    It's some sort of flaw, and totally repeatable in testing.
    Hopefully, it will be fixed soon.
    Howard

  • Yosemite on internal HD and boot Snow Leopard from external HD clone

    Hey Everyone,
    I recently cloned my Snow Leopard 10.6.8 internal HD to an external FW800 HD which I can boot off. I have backup of everything, both Time Machine and straight backups.
    I am thinking of upgrading to Yosemite and am wondering will I still be able to boot into Snow Leopard from the Clone?
    I had heard somewhere that Yosemite makes some changes to the logic board which makes it troublesome but I am not up to scratch on this stuff.
    My System is an iMac 2011, identifier 12,1 with 2.5GHz i5 and 4Gb Ram(soon to be upgraded to 16Gb)
    Many thanks in advance
    J

    Hello. I have a similar question. I recently purchased a new iMac (21.5-inch, Late 2013, 3.1 GHz Intel Core i7, 16 GB 1600 MHz DDR3) running OS X 10.10.2 Yosemite.
    My issue: I have an external drive that I partitioned into two partitions, one is for all my music, pictures and videos. The other partition drive is Snow Leopard 10.6.3.
    On my old iMAc (still set up and using it) which is a 2007 machine and running Mt. Lion, I was able to select which drive to start from, between Snow Leopard and Mt. Lion.
    This allowed me to keep playing Sid Meier's Civilization III (the last version where you can build a palace).
    Anyway, on the new iMac, when I choose the Snow Leopard disk as startup, and it reboots, I get a gray screen with the apple on it, and nothing happens.
    Is there something else I need to do? Any idea why this does not work as easily as it did on the old machine?
    Thanks.

  • Can't Install Snow Leopard on external drive

    Hey Mac Addicts,
    I'm trying to install Snow Leopard on an external drive (Lacie Triple Rugged, FW800 USB3.0)  but keep on getting "Installation failed, can't copy the support files.
    My drive is partioned in to 5x100GB partitions, GUID partition scheme. I boot from my installation disk, choose my partition and hit install. The DVD spins and spins and eventually give me a failure. I've tried not installing the custom options (Quicktime 7, Rosetta and have even unchecked X11) but still get the same.
    The MacBook Pro I'm trying this from is running 10.6.8 and previous successful attempts at doing this were from 10.6.4, I'm thinking this is the issue, but would rather not have to clean install my machine and try again.
    If anybody has any idea's that'll be marvellous, as I am a little confused and lost, especially as I've done this before.
    All the best and thanks in advance.
    BigMik

    Two things,
    1: Use FIrewire
    2: Use Disk Utility to first Erase with Security Option Zero All Data, the entire drive, then setup the partitions
    3: If it doesn't work, then increase the size of the 10.6 parittion or reducing the partitions until it works.
    4: Also do all this from the Disk Utility on the internal drive, then try again from the 10.6 install disk. Apple might have pulled something.
    Also you can clone your present OS X 10.6 partition using the donationware Carbon Copy Cloner, however the external partition needs to be large enough for all the contents (recommended)
    https://discussions.apple.com/message/16276201#16276201

  • Boot Snow Leopard from Thumb Drive in Single User Mode on Macbook Air

    I'm trying to boot from a thumb drive that I transferred the Snow Leopard .dmg on. My macbook air only lets me get into single user mode. Every time I try to boot or enter safe mode or regular mode, the Macbook Air shuts down.

    I do have the installation media on my usb flash drive. I'm sure it's leopard, and the problem is that I cannot get passed the apple logo on boot. The laptop turns off after trying to finish the boot for twenty seconds. However, I can get into single user mode. I just can't seem to install the media in single user mode due to my lack of know how.

  • Can't run Snow Leopard from CD drive

    I just bought a second hand mac pro 5,1 (mid 2010) with no hard drives and no installation CDs.
    I bought a 120GB Samsung EVO SSD. I am waiting on an IcyDock to connect the SSD to hard drive bay 1.
    In the meantime I'm using an extention sata cable to connect the SSD to the motherboard (HDD bay 1) and powering it via a power adapter to sata power.
    I've formatted the SSD using my 2008 iMac to extended (journaled).
    I've inserted my Snow Leopard disc (that I bought years ago) into the optical drive restarted the mac holding c to boot from CD.
    I hear the disc spinning, the white background with gray apple logo appear but nothing happens. The disc stops spinning. Background stays.
    Am I doing anything wrong?
    Does the macpro side door have to be closed?
    I've contacted apple about needing the original installer discs and they said I could just buy Snow Leopard and use that. I already own it.
    Another symptom: If I unattach the SSD and restart the mac holding the mouse button on, the DVD drive doesn't open. It only opens with the SSD attached.

    While you're waiting:
    Install Snow Leopard into a new partition on your 2008 iMac.
    Upgrade it to 10.6.8.
    Clone it.
    Restore your clone to your SSD for your MacPro.
    Install the SSD into your MacPro.
    Boot it up!

  • Can't boot PB 17" from external drive using Firewire

    Title says it all. I've got a WD My Book 500MHz external drive with Tiger loaded on it. The startup drive panel shows it as a bootable drive, but when I select it and restart, the PB briefly displays the question mark folder and then defaults to the internal HD running Leopard.
    I repaired disk permissions on both drives, but still no success. Any ideas?
    John

    Thanks. According to Western Digital, some versions of this drive are bootable, though the Studio Edition I have is not. See the WD My Book page for a list of what they say are bootable versions.
    That page at the bottom also gives a procedure using Disk Utility to make any My Book bootable. I tried it twice, however, and no go. The issue you raised must be the catch.
    John

  • Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?

    Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?
    Is this because of hardware changes? Or firmware changes? Or is it just and Apple Inc. administrative fiat?

    @Steve Holton: Sorry Steve, but you're wrong about that one . I'm using 10.8 (purchased and downloaded) on the internal HD of this MBP8,3 (2.2 GHz, 17"), and I am also able to boot into 10.7.4 and 10.6.8 from external FW800 partitions.
    However, I DO have problems with my MBP9,1. It came with 10.7.4 installed and ran fine. Then I purchased and installed 10.8. It ran fine but could no longer boot from 10.7.4 on an external partition. I then reinstalled 10.7.4 on the internal HD and discovered that it is still unable to boot (even 10.7.4) from an external FW800 partition.
    One of Apple's Senior Support Advisors has done some remote troubleshooting but the case is still open and unresolved. An earlier Apple Support case suggested that when, I installed the downloaded copy of 10.8, there had been a "firmware update" (behind the scenes) that is now causing the problems with booting from my external partition(s). This apparently is "a bug": it is not what is supposed to happen.
    So - I believe - "the problem" really has nothing to do with hardware capability. It is strictly about Apple's strategy for "managing its future customer base". If you don't like it - use something else - I am seriously considering Ubuntu as an alternative.
    If there's a hidden caveat in all this it's probably "Read Appple's Licence Agreement VERY Carefully".

  • Can't read iPhoto library from external drive

    I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

    Network Drive? a NAS?
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
    Basically, you need to move the library to a correctly formatted disk.

  • Install snow leopard from external hard drive-terminal problems!

    hi everybody ,
    i have a big problem :s
    wanted to restore and getting "Restore Failure Could not find any scan information... then i've followed some terminal commands..finished restoring and couldn't boot cause i only find Macintosh HD when i use "alt option" when i restart my macbook pro and even if i go to "startup Disk" i can find my partition of the external hard drive but when i click on it nd do retart it's can't boot ...another thing is tht m having a slow start and it's ask for my Password (i've no problem with password it just doesn't ask me to enter it before and i have internet and server failure)
    Due to terminal commands?? :((
    Plz help :s

    "How to install Snow Leopard from an External Hard Drive"
    * Launch Disk Utility
    * Select the External Firewire/USB device that you want to use as the boot drive for the upgrade
    * Click “Partition” from the menu options
    * Select 1 Partition, then click “Options” below the partition scheme
    * Select the top option for “GUID Partition Table” – it MUST be GUID to be bootable!
    * Click OK to create the GUID partition (this will reformat the drive, ie: all data is lost)
    * Next, click the “Restore” tab within Disk Utility
    * Select your newly made Snow Leopard 10.6 Install DVD image and restore this image to the GUID partition you just created OR…
    * Alternatively, you can select the Snow Leopard Install DVD and restore directly from the DVD to the GUID partition
    * After the restoration is complete, your GUID partition will now be bootable by Mac OS X!
    * Reboot the Mac holding down the “Option” key to pull up the boot loader, select the Snow Leopard install drive you just created rather than your default Mac OS hard drive
    * Install Snow Leopard as usual!
    Hope this helps!

  • Running Snow Leopard from External Hard Drive

    I have some teacher software that lion won't run.  It was suggested to me to run snow leopard from an external hard drive.  I have an external WD hardrive for mac.  Can someone share with me on how to do it?
    Thanks!

    Have a look here
    http://support.apple.com/kb/HT1948

  • Can't boot install disk from usb drive

    I bought a macbook pro back in late 2007 and up until now im getting ready to sell it. So now while restoring to factory settings, i wiped off the hard drive and i need to reinstall my install discs which i still have. However, the cd drive doenst work on the laptop. It hasnt worked since i can remember. I already imaged the instal disk into a usb flash drive and tried booting from there. When i turn it on and hold "option," it reads the flash drive as a backup, but it wont boot from it. I click the flash drive, and it loads, but then the apple logo gets replaced by a "no symbol."
    I have a new macbook pro, but not a firewire cable or an external cd/dvd drive. Anyone know how i can get the old laptop to boot from the usb?
    BTW, the install cd's are for tiger, but i installed snow leopard when it came out. Im not sure if i still have the cd for snow leopard, but i dont think that would help since the cd drive doenst work. Do i need to buy an external cd drive to reinstall my operating system?

    chonke wrote:
    the install cd's are for tiger, but i installed snow leopard when it came out. Im not sure if i still have the cd for snow leopard
    Well that's your problem you used Tiger and the firmware was changed to prevent booting from the older operating system once you upgraded to Snow Leopard.
    You will need a copy of the Snow Leopard disks, the white one's online at Apple will work
    Then you need to follow this to make a 10.6 install USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Here are the instructions to install Snow Leopard, I advise zero erasing the entire drive first, this will clear any bad sectors and make the install work perfectly when you sell it and not get call back (although the cd drive is dead of course)
    You might be able to extract the free iLife off the Tiger disks, then Software Update fully to bring it up to date using Pacifist from CharlesSoft.
    How to erase and install Snow Leopard 10.6
    BTW, you can't boot/install off a external optical, only internal.

  • Install Mac OS X 10.6 Snow Leopard from USB Drive

    My MacBook Pro (Late 2006 15.4-inch 2.33 GHz Intel Core 2 Duo) has a SuperDrive that does not work.
    I wish to re-install Mac OS X 10.6 Snow Leopard, as this is the latest DVD I possess, to wipe the HDD prior to selling.  It has Lion installed but this was done via the Mac App store and I don't want to sell with any links to my account or as an authorised computer.
    How do I boot the MacBook Pro from a USB stick, wipe the HDD and install Snow Leopard?

    You will still need a Mac and a optical drive, a external one will do. To read the disk to put it on a USB, external opticals are not bootable.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Here is how to remove data off the machine (hold on, extermely paranoid )
    How do I securely delete data from the machine?

  • How can I remove Snow leopard from my Mac, it crash all important programs

    Please tell me how I can remove Snow Leopard from my machine & revert back to Leopard 10.5.8
    Since I loaded Snow leopard, Adobe Illustrator, Photoshop, Quark & Mail all quit over & over again. I never had ANY of these issues before loading snow leopard. I rely daily on the programs I listed. I am not saying once in a while, but constantly; opening the programs, exporting, placing graphics, emailing, you name it, it quits the program I am in. I keep sending apple the crash reports, but I am afraid I have reached my end. (Apple must have a folder fu;l of crashes with my email address in it by now.)
    To maintain my sanity PLEASE tell me there is a way to do this without risking loosing any of my data.
    I do have time machine hooked up.
    Please be a life saver (sanity saver) and tell me how to get Snow Leopard off my machine!!!!!

    First, Welcome to the Discussions,
    Second, there is no way to successfully degrade an OS to a previous version. You would have to install anew a previous OS, thereby erasing all your data. Then you would take that version up as far as you want to go.
    Of course if you've been using Time Machine you can recover to the prior system and retain your files using that.
    Best of all would be to have a firewire external drive and use an app like this to make a clone on. No worries then if one wants to go back before any major changes very precisely.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    Good luck.
    http://support.apple.com/kb/HT1427
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
    Message was edited by: Samsara

Maybe you are looking for