Can't boot usb windows 7 installer early 2008 MBP 15"

So I have figured out the keyboard ribbon issue, now heres the next one. The super drive doesn't work on this MBP, and it will not boot from a USB installer. Which is weird, since thats how I installed Mavericks. I'm trying to put Windows 7 Ultimate on it, so I got the ISO from microsoft and used their USB installer creator. Yes I have a legit key. I'm no pirate.
The EFI boot selection screen doesn't show the windows installer. I also tried using bootcamp utility to set it up. No dice. Am I SOL until I get the superdrive installed, or is there a trick to installing it?

Install ISO means you burned DVD installer and did you reduce burn speed? otherwise it is a bad install.
3rd party updates? for security suite? stick to MS Security Essentials instead.

Similar Messages

Early 2008 MBP, can't install OS X

My Early 2008 MBP has a dual hard drive configuration. The stock HDD has all my documents and data on it, the SSD that used to have OS X installed had to be formatted. I tried to use Recovery Mode to reinstall OS X, but the install screen stops at the very end of the installation and says that it could not download the necessary files for the installation. I have tried installing on both of the hard drives even with previous versions of OS X only to yield the same result.

WiFi only shows when there is no Ethernet cable connected and it shows during the Boot Process so you can chose and log in to your WiFi SSID.
1) Right you more then likely bought it with Lion Pre-Installed. But the Early 2011 models originally had Snow Leopard Pre-Installed until Lion came out. Early 2011 models were released in February 2011. Lion came out in June I think and then the late 2011 models came out in October. The the Early "Mid" year 2011 models came with both version of OS X, Snow Leopard and Lion. Depending on when it was manufactured.
2) if you already downloaded and installed Lion a week, or so, ago why are you doing it again? What problem did or are you having that is making you re-install?
Whatever that problem is may be the ROOT cause of the downloading problem you are now having. Like not being able to write to the drive. A HDD failure.
Do you have an external drive laying around? If so connect that external and point the download to that drive and see if it completes and then starts the install. Back up whatever is on that external.
If the download does complete and the install starts then you know it is a problem with the internal drive.

Can't boot to windows, stuck at black screen (with cursor)

Hi! I'll get straight to my problem: I can't boot to Windows (Windows 10 Technical Preview) anymore after installing VirtualBox (or rather, an Android emulator that installed VirtualBox) on my system. I get stuck, after the loading animation with the blue HP logo, on a black screen (I can move my cursor around) but the login screen never shows up.
The problem.
I'm currently dual-booting linux and windows for several purposes. My laptop came with a Windows 8.1 OS by default. Some time after the Windows 10 Tech Preview came out to public, I upgraded my system to Windows 10 (so my 8.1 is gone now). Everything's going well until I installed this Android emulator (which installed VirtualBox) on Windows 10. Everything seemed fine at first but after rebooting, Windows isn't working anymore. I can still boot to linux, but Windows just won't boot properly.
What I've tried.
I've tried A LOT of things. The problem actually happened twice already (at first I was able to fix it with System Restore but not this time around). I have a Windows 8 USB Recovery Drive at hand, just so I can access a Windows command line. It's not from my system, though. It came with a new windows 8 laptop of a friend so I just borrowed it.
1: System Restore. This worked the first time. But now the restore won't finish and throws an error, telling me that it can't restore my system.
2: Refresh PC. "There was a problem refreshing your PC. No changes were made." or something like that.
3: chkdsk on C:\. It says it changed some files, but it doesn't really fix the problem.
4: sfc /scannow. Again, something happened, but it didn't get fixed.
5: bootrec.exe to fix BCD and MBR. Doesn't work. (as far as I know my sytem is using GPT)
6: Hard reset (remove all power sources then hold power button). Still not working.
7: System Restore again. All the restore points aren't working. It reaches a "Finished" state, but then an error comes up after. It says can't extract a specific file, and the restore point is damaged or might have been deleted during restore.
8: checking and fixing bad sectors (nope, no bad sectors on my hard drive)
9: built-in component tests. It passed all of them, except the battery test (my battery really isn't surviving for any duration longer than 30 minutes, but that shouldn't affect my OS). I didn't try the really long tests since I thought it wouldn't matter as my problem is most probably completely software (since linux is still working).
10: cry. oh please. Windows isn't working. What should I do? (
Things I haven't tried.
1: RAM and CMOS battery reset.
2: Reset PC.
3: Format hard drive.
4: Test hard drive on another laptop's system.
If possible I'd like to avoid getting my hard drive wiped, since I have a lot of stuff to backup (more than 300 GB of files + dozens of linux apps and ppas), and I only have a 32GB USB drive to backup all the files I need).
Thanks for reading.

Sorry for the delay. Wasn't expecting the "road work" signs when attempting to check back with you in the AM here.
As others have already mentioned, the prompt for file systems occurs during text mode setup. Quick or Full? FAT or NTFS? How do you know what to do?
We'll start with file systems, short and sweet. Most any OS can read and write FAT volumes without fail which makes FAT ultra-portable, and the only choice if you want to let Mac OS write documents on your Windows volume. It's also more efficient on drives of 16 GB or less. However, FAT has no folder-level access control, so any file in the system can be manipulated by any user or by any system process. By contrast, NTFS is far more restrictive. It can only be manipulated under Windows, though other systems may be able to read it. Not only do you get the access control that FAT lacks, but you also get superior efficiency on large volumes, plus the power to compress or encrypt folders and files at will (in "business" flavors of Windows only--and yes, Vista Ultimate counts as "business" even though it will be supported much like a "consumer" version).
On format speeds: A quick format is very handy if you have a large partition or a single drive completely dedicated to Windows. Because it completes in 30 seconds or less, it will go a long way toward completing your Windows install. However, in some cases, volumes formatted with a quick format may have reliability issues. They must have fixed this in Vista, because Vista can only format at the "quick" speed.
A full format tests all blocks of a given volume (as opposed to testing an entire disk unless the volume itself is the entire disk) as the file system structure is laid down. Bad blocks are marked as "used" when they are found. This type of format takes much longer as a result of all the testing, but the result is a more stable volume from the start.
Get past the formatting stage, and you'll be right as rain.
Nate

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.M

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

Changed my iMac but Can't Boot from Windows

I'm using iMac 21.5 with Mac OS X 10.6.6
All programs are updated.
I used to have iMac 24, but i removed it's hard drive and installed it on a new iMac 21.5
i can't boot from windows 7.
what should i do ?

Can you boot into safe mode ..... because if you can you can also reach "repair computer"! so reboot your windows partition, as soon as the bios appears start pressing F8 until you see "Advanced Boot Options" when you get there choose, "Repair your Computer" (1st selection on the page) and go to "Startup Repair" .. selecting that will cause Windows to attempt to repair the boot sector of it's partition, if it succeeds you'll be able to boot, if not no data will have been lost.
However please understand that without a backup of your windows partition data loss is a possibility under these circumstances. Windows hard drives almost never boot when moved from one installation to another. Read that last bit twice.
Good luck
Message was edited by: Csound1

Can't boot into Windows 8.1 partition after apple store repair

Can't boot into Windows 8.1 partition after apple store repair
I went to the apple store about a week ago to get my screen fixed, and when I get it back I don't have an option to boot into my windows partition. The bootcamp partition is still there, but I can't boot into it. I can still see all of the files on the drive. When I try to boot into windows from the startup disc setting I get "no bootable device — insert boot disk and press any key” on a black screen. I went in for a dead pixel, and the guy at the genius bar ran something on my computer and went into disk utility application. I’m not sure what he was doing, but obviously that’s what messed up my windows partition. How can I be able to boot back into windows? Here's what disk utility looks like on my computer.

Here's the output
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 b0 0e 2b |........?......+|
00000020 00 00 00 00 80 00 80 00 ff bf 2e 0f 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 05 92 d3 74 c4 d3 74 aa |...........t..t.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
Here's a better screenshot.

Can i convert my windows installations of elements 11 to mac?

can i convert my windows installations of elements 11 to mac?

The Elements serial number is good for both Windows and Mac.
Just download the Elements 11 trial version (Mac version) from Adobe.com or from http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Enter your serial number and you're good to go.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
Thanks

Hi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can't boot into windows 7 anymore......

Hi all, I have a Mac mini late 2012 with windows7 installed through bootcamp5. It has worked flawless until recently, now I can't boot into windows anymore. I've checked in finder and the bootcamp partition is present and also all the files. Before that, I did have some trouble with my LaCie 2big thunderbolt hdd, it kept on saying I had to reformat one of the discs in the drive, but only when used in windows, in OSX there was/are no problems reading the hdd .......
Any idea of how I can make windows bootable again?, do I really have to make a fresh install of windows to make it work??
Any help is very much appreciated
Kindly
Jan

You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

How can I make my 24-inch, Early 2008, iMac faster?

How can I make my 24-inch, Early 2008, iMac faster?

It would help us to help you if we could have some more technical info about your iMac.
If you like, please go ahead and download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic report tool by a regular Apple Support forum user and technical support contributor named Etresoft. Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You.
In addition, your year and model iMac can take a total of 6 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
OWC has the 6 GB RAM modules kit.
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S6GP/

Windows die out because of battery, can't boot to windows again

Windows die out because of battery, can't boot to windows again

Windows die out because of battery, can't boot to windows again

Early 2008 MBP screen not turning on

I have a 15 inch early 2008 MBP that the screen will not turn on. When i power on, the hard drive makes a sound that its turning on, but then nothing happens, there is just a black screen. The indication light is on, but again, nothing on the screen. I have tried pulling out the battery, resetting everything i can reset, but still nothing. Any ideas?

Hi B,
You may have the NVIDIA issue. If you have the GeForce 8600M GT GPU it is covered under the free repair program. Bring the MBP to an Apple Store or AASP for free testing. If Apple's free test confirms the issue, repair is free. Read all about it here: http://support.apple.com/kb/TS2377
There have been stories of, ummm, "uninformed" workers, so print out the article, familiarize yourself with it, and if you meet resistance, politely/firmly stand your ground and ask for someone higher up the food chain if need be. The GPU is part of the logic board, so "repairing" it means replacing the logic board (Some workers have tried to play word games, saying the logic board needed to be replaced so it wasn't a covered repair because it wasn't just the GPU. Grrrrrr!). Good luck!

HI! early 2008 MBP 4,1 startup or power up Failure! HELP! thks!

I have an early 2008 Macbook pro 4,1. The computer was sleeping all night, and when I pull up the screen to use it, the Mac apparently was running but no screen on it, so I try to increase or decrease de light on the screen but nothing happened, so I force it to shut down with the power bottom, then I tried to power it up, and it really does for 2 to 3 seconds, and it shut down... there is nothing at screen. What i did to troubleshoot with no results: press de power bottom for 5 seconds with no mega safe adapter and battery - press de left shift + option + command + power bottom with the megasafe adapter - I did take the HDD - took de RAM memory.
Another thing: When I took the Ram memory the MB stayed beeping like telling me that there was no memory, but it didn’t shut down. I had to shut it down myself...
Any suggestion please!? Thanks a lot!

The early 2008 MBPs had serious videocard problems which you may be experiencing. You will need to go to an Apple Store or service provider to have the MBP tested which may cost you. The problem is that the 4 year extended video card warranty has long expired for all these models so getting a free repair is not likely.
Some discussions to peruse.
https://discussions.apple.com/message/17901599#17901599
http://support.apple.com/kb/TS2377
https://discussions.apple.com/message/16921827#16921827

Can't boot from windows 7 usb installation media

When trying to boot from windows 7 usb installation media no efi boot option availiable. Using "boot from efi file" option whith each and every .efi file on installation media results in a message saying "The selected boot device failed. Press <Enter> to Continue".
USB installation media created using original windows 7 iso image and couple diskpart commands(resulting in clean flash storage with a single active primary partition) plus simple copying of the iso image's contents on usb flash.
Enabling/Disabling SecureBoot doesn't have any impact whatsoever.
Installation boots from aforementioned media successfully when CSM enabled, though i would really prefer installing Windows 7 in uefi mode. Which microsoft claims Windows 7 supports.
Any help or suggestions would be much appreciated. Thanks in advance.
PS: my disappointment in this particular HP notebook is unspeakable. Aside from issue of the current topic, It keeps defaulting to windows boot manager when dual-booting windows & linux no matter what i do, and windows 8.1 Pro is constantly BSODing whenever i try to run fullscreen games on high-performance GPU whith every graphics driver i could possibly install (including both hp's own and amd's). Found silly workarounds for both of these issues, however still hate HP treating it's customers that way.

Booting from USB 2.0 port or DVD with SecureBoot disabled gets me to a screen saying "starting windows", just before the actual setup begins and then system simply hangs. Still unable to install. Thanks for your suggestion though.

Can't boot usb windows 7 installer early 2008 MBP 15"

Similar Messages

Maybe you are looking for