Can't break the chain

Hi, I am in the Sequence Settings tab and am trying to change the "width" and "height" settings. I can't get the chain to unlock the "keep aspect ratio" so I can change only the width setting. How do I get that to unlock? Clicking on it does not work. Nor does any combo of Shift, Control or Alt.

You need to use a CUSTOM Setting to do that.

Similar Messages

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can I break the tool tips (tip strips) into to seveal lines?

I use the tip in "Description and tip..." to display tool tips (tooltips, tip strips, help cues, the little yellow strips with helpful information about a control). Some of the help messages are long, but the tips are still displayed on one line. In some cases the whole text can not be read because the tip is wider than the screen. I would like to be able to specify a maximum width of the tip, or to be able to manually insert line breaks.

Hi Nick
Actually, I write multiline string up to 256 char long in worpad. Then, I copy and paste into de tip dialog from pop up menu and it works fine.
Hope it helps.
Alipio
"Qod natura non dat, Salmantica non praestat"

How can I break the password that is locking the volume on my Ipad?

My daughter locked the volume on her Ipad but doesn't remember the password she used. I'd like to unlock it, as her volume is TOO loud. Can anyone help?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How can I break the iPhone i lost

I lost my iPhone 5 and I already erased it, but I want to breake it in orther that no one can use it again. Is that possible?

No.

I change my passcode yesterday and forgot so how can i break the code in iphone 4

i was using iphone 4 soo yesterday i change my passcode and forgot the code so anyone can help me plz

ishrath shehzard wrote:
... i change my passcode and forgot the code ...
If you cannot remember the passcode, you will need to Restore the device...
1) Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Server 2008R2, Windows updates apply - fail - revert. We can't break the cycle

We have a 2008R2 server running SQL that has for months tried to apply updates, eventually fails, and then reverts.
We've tried to manually go through 1 update at a time, but they all fail and revert. Usually taking hours to go through this process.
We've gone through the steps in this KB article to no avail:
http://support.microsoft.com/kb/2509997/en-us
Thoughts, Suggestions?

Readiness update tool ran, this is the output:
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2014-02-10 20:28
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 491
No errors detected
(w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache

I need to break the install process

Hi,
I recently tried to run an archive and install on my G5 Mac - Dual 2ghz - 1 gb ram OSX Version 10.4.11.
Unfortunately, I am missing the "correct" version of disk 2. As a result, I cannot continue with the install. Nor can I do anything with this drive, since it goes straight into the installer and asks for disk 2.
I can put the drive in another identical Mac G5 and see all of the data on the drive including the "Previous Versions" folder, and the "new" system folder.
If I delete the "new" system folder and put it back into Mac-A I get a Kernal panic - missing drivers screen.
So, either
A: How do I break the boot process to start over with a different set on the original machine; or
B: what file do I need to delete from the hard drive (using the second machine) to allow me to restart the process (using a different OS ver.?
Thanks!

You really can't break the installation process midstream. You can attempt to fix a mistaken install using an Archive and Install, and combo update back to the version you were at last, but that's dependent on their being enough space on your system*:
http://www.macmaps.com/diskfull.html
After an archive and install, you can migrate data back to your new system that is usable. Frequently added drivers and plugins are not usable, but applications may be usable from a previous system.
This is why it is so important you backup your data before installing anything*:
http://www.macmaps.com/backup.html
If you haven't you can backup even a shoddy system and restore elements such as documents, but don't expect anything else to be usable.
- * Links to my pages may give me compensation.

Can I break table columns to allow for gutter???

I am placing a very large Excel table onto my spread. Can I break the columns and thread to a new frame on the next page to allow for gutter? This would be a vertical break rather than a horizontal break acheived by (shift+number panel enter).

Your attachment is still queued. If you *insert* instead of attach your picture (use the camera button at the top of the post window instead of the attach field at the bottom) we would be able to see it.
If your table has too many columns to fit on one page, you can open the text frame all the way across the spread and run your table completely across the spread. You'll have to put an extra, blank column across the dead zone between the pages.
If your table has too many rows to fit on one page, you can thread the text frame to a second frame on the next page (doesn't matter if it's across a spread or not, although keeping it on a spread certainly is easier for the reader).
What you can't do is break rows. ID won't split a row across pages the way Word will.
Hope that helped. If it didn't, insert your picture 'cause that queue can take days.
Ken

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Hi guys, i have bought a jalil break iphone 4 and i don't even know can't do the update, so anyone got idea to fix it up? thank you.

Hi guys, i have bought a jalil break iphone 4 and i don't even know can't do the update, so anyone got idea to fix it up? thank you.

franciskhor wrote:
Hi guys, i have bought a jalil break iphone 4 ...
You will need to look elsewhere
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

Can we stop the process chain in middle of the process ?

hi experts,
Can we stop the process chain in middle of the process after scheduled.
my process chain is like start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
if it is possible what are the steps we fallow pl give me step by step procedure.
thanks & regards.
venkat

stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
for restarting, have a look at this blog.
Restarting Processchains
there he explains how to restart a stopped process chain.
Raghav

How can i find the meta chain name?

My process chains are running based on meta chain option,So how can i find the meta chain name???

Hello
Goto SE16
Table RSPCCHAIN
ut u r local chain name as varient and exe
similerly goback if the chain you get is also a local chain....Until you get only one chain...
Where Used List --
RSPCPROCESSLOG table
You can see the Process Logs at SM37 too based on the Technical name of the Chain you can trace the Meta chian
Thanks
Geeta

How can we change the description and name of Process Chain in Production

Guys,
Can anyone please help me to understand how can we change the name and description of the process chains in Production in SAP BI?
Regards

open the process chain and go to edit mode and then press Ctrl+F6 for a rename... you can only rename the description and not the technical name.
If you want to edit PC in production - esp one which has been transported - go to transport connection and change the object changeability for the same to everything changeable ( right click on the same to get this option )

Go Daddy UCC Certificate: "ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update"

Hello,
I have this issue regarding certificate chains while performing Outlook Anywhere connectivity test
by Microsoft Remote Connectivity Analyzer:
"ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled."
Note: even if I got the error, Outlook Anywhere and
ActiveSync services work fine.
Environment:
- Exchange 2007 with SP3
- Go Daddy Multiple Domains UCC certificate (up to 5 Subject Alternative Names)
I already read and followed instructions on this TechNet post
Can I safely ignore this warning about the SSL cert? Using GoDaddy UCC cert but it is a little bit different by this case.
So after an investigation I understand the issue above is related to SSL certificate
Certification Path (see screenshots below).
NO ERRORS on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Intermediate Certification Authorities
repository
Starfield Technologies (http://www.valicert.com)
is under Trusted Root Certification Authorities repository
ERROR on ExRCA checking
Go Daddy Secure Certification Authority is under Intermediate Certification Authorities
repository
Go Daddy Class 2 Certification Authority is under Trusted Root Certification Authorities
repository
Can you add some useful information ?
I'm opening a support ticket at Go Daddy; I hope they could me some positive feedbacks.
Regards,
Luca Fabbri
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees, and confers no rights.

Strange I have a feeling the exrca tool can't validate the godaddy class2 root authority due some older compability and wants to use the older original root authority valicert owned godaddy. Or when the exrca tool is validating the root CA it only has the
goaddy class2 root ca that was issued by valicert and not the standalone cert when doing the comparision. I sent the question to MS and will let you know when I hear back.
You can get rid of it
https://certs.godaddy.com/anonymous/repository.seam
Download the cert
◦gd_cross_intermediate.crt
Then import it into the trusted root cert authority on your CAS boxes. Then you need to delete the other godaddy class2 root authority. Make sure you see the one you imported both will be named goaddy class2 root authority but one will be issued by valicert.
Re-run the test and it will go away, I also saw the error with my domain as well using godaddy and got rid of it by using the new cert authority.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Can't break the chain

Similar Messages

Maybe you are looking for