Can't bring Monitory out of standby

I can't bring the monitor out of standby (blank screen) with Magic Trackpad or Wireless Keyboard.

Additionally go to: Apple > System Preferences > Bluetooth > click Advanced and make sure that "Allow Bluetooth devices to wake this computer" is checked.

Similar Messages

How to stop mouse bringing pc out of standby (K8N-neo 2) CORRECTION ADDED

I have a problem with a pc running XP-pro on an MSI-k8n-neo motherboard, when i put the pc into standby (S3 str) if you move the mouse while its in this state the pc comes out of standby. This is something i dont want it to do, the mouse by the way is a wireless Tevion laser mouse connected via ps2. I have run the bios set-up and disabled the mouse from bringing the pc out of standby. I have also gone to (from control panel) Mouse / hardware / properties / power management and unchecked " Allow this device to bring computer out of standby ", but the mouse still brings pc out of standby. Anyone know how to stop this happening.
Some more info, the pc connects to the internet via a wireless link which i believe operates at the same frequency as cordless mice. There could be some interference being generated between the two,but i dont see how the mouse can start the pc if i have disabled it from doing so. As i have said the mouse has a ps2 connection which connects to its docking station, the docking station does not have its own dedicated power supply and draws power from the ps2 connection for running and recharging the mouse, even when the pc has been shut down.

I tried moving the mouse base station further away from the wireless antenna but it made no dfference, In saying that though the cable on the mouse base station is very short. Another way of putting the pc in sleep mode was suggested to me and that was to use hibernate instead of standby. I tried it and it works fine. So im gonna stick with it, i would liked to have gotten to the bottom of the mouse problem though. If i do i will post back here.

Can't bring system out of Hibernate mode after snow leopard install

Things work fine until I come back to the mac after it goes into 'suspend mode"... i hit the keyboard to wake it up and all i get is the eternal wheel of death. I have to turn off the mac, then unplug it for a few minutes, then start it up. It takes over 3 minutes to boot ( compared to 32 seconds on my Air).
Is anyoone else experiencing anything similar? Any suggestions?

I am having a similar problem but with an added wrinkle:
If I walk away from my MBP, the screen will eventually go black and I cannot bring it back (sometimes even without the spinning wheel of death) but I notice that the computer is still running hot, which makes no sense at all. I have to manually shut down and wait for the machine to cool in order to get a normal reboot. If I close the machine, there is no problem: the computer cools nicely. (Any ideas? (I did not do a clean install.)
The problem does not occur with my iMac.

Can't bring out the video control penal

When playing the video, the control penal is not displayed. Tried all settings but can't bring it out. Pl. help.

Odd. Try restarting the iPad (hold Home and Sleep until the apple log appears), or a restore via iTunes

Cannot come out of standby w/ wireless keyboard mouse (usb)

For some reason I cannot get my mega 180 to respond to keyboard or mouse activity when in standby (wireless mouse/keyboard via usb). In ther device manager, the options to "allow this device to bring comp out of standby" is grayed out. Any ideas?
Something else I have noticed that might jog someone's brain: I have a touchscreen monitor that connects via a 9 pin adapter (it is made for a serial port) to a usb port. When I bring the computer out of standby by pressing the power button, I lose the touchscreen function, and can only get it back with a reboot.
tia

bios settings
you want s3 bios to turn the most devices off.
probable need to turn apm to disable,
and then enable some sort of wakeup ...kbc (keyboard comand,...wake on usb or something like that.
that worked for my msi board..yours should be similar

How can I bring 2 photos in Creative Cloud to work on? I would like one as a background the other I want to cut something out to put in the background.

How can I bring in 2 photos to use in Creative Cloud to work on? I would like one as a background and the other I would like to cut something out and put it in the background picture. Help Please!

Creative Cloud is not a program, it is a marketing and delivery process
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
So... what is the name of the program you are using?

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

After making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?

Try to position your iphone that the screen is facing away from your skin.
Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
Thats what i do:)

Can I bring up siebel services while DB in read only / Standby Mode

Hi,
I am trying to bring up the siebel services while DB is in read only mode..
Can I bring up siebel services while DB in read only / Standby Mode ???

Hi ,
Not sure. But I think you can, since bringing up the siebel service require some query from DB and some readings from the gateway.
Cheers

TS2771 the blue A apple store icone was wiped out from the first page how can I bring it back to live again

the blue A apple store icone was wiped out from the first page how can I bring it back to live again

See my response to your other post.
B-rock

OSX crashes when coming out of standby with bluetooth mouse connected

Hi everyone,
I recently bought an HP bluetooth mouse for use with my macbook pro as i find the mighty mouse uncomfortable. Problem is if I close the lid and put my mac into standby I cant bring it out again and have to power it down and restart. This only happens when this mouse is connected. How can I stop this from happening? Obviously it's no problem to disable bluetooth before going into standby but sometimes I forget and that becomes a real pain when I want to start up again.
Thanks in advance
Simon

Finally sorted it myself, I needed to disable the option to let bluetooth devices wake the machine.

7.3.2.6 crashes when coming out of standby mode

Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.

Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hello Noushin,
It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
If you're using iOS 7, quit and restart the Contacts app on your iOS device:
Press the Home button twice to see preview screens of the apps you have open.
Find the Contacts preview screen and swipe it up and out of preview to quit the application.
Tap the Home button to return to your Home screen.
Wait a minute before reopening the Contacts app.
Turn iCloud Contacts off and back on:
Tap Settings > iCloud.
Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
Wait a few minutes before turning Contacts back on.
Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT204150 one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

Welcome to the Apple Community.
The first thing you should do is have your friend log out of your account and change your password.
Do you have a back up from when you had the contacts on your phone.

Can i bring a broken ipod to come fix it at the apple store with no charges

Can i bring a broken ipod ro come fix it at the apple store with no charges

If it's physically broken or has damage to it, then it's a paid repair cost.
If it's just not working and has no damage (physical or liquid), they should be able to take care of you unless you are out of warranty.
Go here to check your warranty.
Go here so find an Apple Store for service.(choose your country in the top right)
Go here to look at repair costs. (choose your country at the top)

Can't bring Monitory out of standby

Similar Messages

Maybe you are looking for