Can't bring out the video control penal

When playing the video, the control penal is not displayed. Tried all settings but can't bring it out. Pl. help.

Odd. Try restarting the iPad (hold Home and Sleep until the apple log appears), or a restore via iTunes

Similar Messages

When I am listening to music on my iPod Touch 5th gen and it is locked I try to double click the home button to bring up the music controls, but it does not work. How can I fix this?

So, I locked my iPod while listening to music, then pressed to home button to turn it back on, then I pressed it again twice to bring up the music controls so I could pause the song. The music controls came up, but they didn't control the song I was listening to, also the album artwork wasn't showing. How can I fix this?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

How can i find out the size of video on my iphone 5?

How can i find out the size of video on my iphone 5?

As far as I've known, all iPhones (3G/3GS/4/4S/5) sold in China (probably only in China) have this low battery alert sound.
So called "localization" or what...
Actually many people found it annoying coz it plays even when the phone is switched to SILENT. However no solution has been found so far
PS: reeeeeeeally hope Apple could see this thread and at least give Chinese users an option to switch it off!!
<Edited By Host>

Is there anything I can do to upgrade the video card so I can upgrade to iMovie 2013 or am I out of luck?

Is there anything I can do to upgrade the video card on my iMac so I can upgrade to iMovie 2013?

Check out the short > Cannot Buy iMovie 10.0 from app store...
and long > Getting iMovie 10 to run on old iMac? version.

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can i take out the glitches

the video i recorded has glitches. how can i take out the glitches. or minimize them.

example of a glitch....
Giltch.

How can I edit a still image so that I can float it over the video?

I would like to edit a still image so that I can float it over the video - How would I save the image in Photoshop so that just the image and not the background can be imported into Final Cut and the footage behind it still shows up?
Thanks

You need to either create an Alpha channel or cut out the area of interest and paste it into a transparent Photoshop document. You can save the former as PSD, TIFF or PNG. Save the latter as TIFF with transparency enabled (shows up in TIFF Options at step 2 of the save dialog).

How can I find out the audio sampling rate of BetacamSP tape?

Hi guys
I'm trying to digitize BetacamSP tape. But I'm afraid if I might choose wrong setting...
This tape is from very long time ago so we don't know which audio sampling rate we recorded with..
How can I find out the audio sampling rate of this BetacamSP tape?
Thanks:)

The sampling rate is set by the Sony DVMCDA2 you are using, when the conversion is made from the analog input to the digital (DV) output. You should be outputting standard DV which is 16bit 48khz audio.
Assuming you are in the US, your Easy Setup for FCP should be DV-NTSC, and then open the Log and Capture Pane and set the Capture Settings Device Control to Non-Controlable Device and you should be good to go.
You will have to roll the deck manually and start and end your capture manually.
You can download a user manual for the DVMCDA2 by clicking here.
MtD

How can I find out the first intial row in VA02-output transaction??

How can I find out the first intial row in the screen which appears during sales order change (VA02) >>enter the sales order number >>after the first screen appears >>in the menu bar go to EXTRAS>>OUTPUT>>HEADER>>EDIT??
I have to find out the first row in the OUTPUT column which is empty,then populate it with some data using BDC.
usefull answers will be rewarded.
regards,
Shashank .

Pass the sale order number in the object key of NAST table,
if u get 3 entires, then u need to place ur entry in the fourth row in that table control thru BDC.
I think u got the logic.
Regards,
Sujatha.

How can i get out the reading list???

how can i get out the reading list?

This really needs to be posted in the Safari forum but I will answer it here.
What do you mean by get out? You want to see the list? Clicking on the pair of glasses controls the display of the list. The glasses are in the gray bookmark bar. Click once to open and click again to close the reading list.

Mac book is not working. The logo is there and the sound but the circle keeps spinning. Can only bring up the utlities screen.

My mac book is not working. The sound is there and the logo on start up. The dial keeps spinning and never stops. I can only bring up the utilities screen and then I am stuck. PLEA

Try the tips here:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Especially holding the trackpad mouse button upon restart and resetting the SMC.
If it's stuck in there you might have to make a "guide" out of two thin pieces of plastic. Post back if that's the case.

How can't i import the videos to iMovie?, how can't i import the videos to iMovie?

how can't i import the videos for i movie?

Dear Mr. Chan-please tell us more about your hardware and what kind of movies you are trying to import into iMovie. as far as I know, iMovie only handles a few kinds of movies, mp4, m4v, mov and DV, and that's it. It will NOT convert every kind of movie out there to whatever. try something like handbrake, perian (with QuickTime) or MPEG streamclip to get the movie that you are maybe having trouble with into a more iMovie friendly format
John B

Can I find out the peak of Output 1-2 without having to play whole track?

Can I find out the peak of Output 1-2 without having to play whole track? I am preparing my album for mastering and I was told to have each track peak at no more than -2dB. Is there an offline peak detector or maybe another trick people use?

You should deliver your mixes to the mastering house in 24bit format. They should be converted to 16bit and dithered AFTER the mastering. Also, as long as the mixes are not overloaded, the levels could be handled in mastering also. That's what mastering is about, matching the perceived levels between the tracks. As far as your last question, "Do you just slap a multipressor on the output at that point and call it mastered?" the answer is heck no. I'd suggest selecting some professionally mastered cds in your genre, and put a few into your "mastering song" in logic and use them to compare to your mixes. Play with the mastering tools (multi compressor, EQ, adlimiter, etc) on your tracks and try to bring them into the ballpark with the reference songs. It will take a while to get a handle on it, but with practice, it will get you there.

WHEN IS ADOBE BRINGING OUT THE NEW PAGEMAKER FOR MAC?

Adobe has photoshop elements for those who don't want photoshop. What about pagemaker for those that don't want to drink the In Design cool aid?
Am I really the only one complaining about the untimely death of pagemaker? I am a dual user- I have PC's and Mac's in my house.
I have gone through the transition of Wordstar to Ami Pro to Microsoft word.
I have gone through the transition of Visi Calc (on an apple II) to Lotus 1-2-3 to Excell.
I will be damned if I'm going to switch from Pagemaker to In Design. I've been using pagemaker since 1990. MY GOD THAT'S 20 YEARS!!!! Longer than some of you have been alive. I have a right to claim upgrade fatigue god damn it!!!!!!!!!
I can run pagemaker on a pc. And that's where I go everytime I want to use it. But my main computer is this mac I'm typing on right now.
I WANT TO RUN PAGEMAKER ON A MAC!!!!!! I WANT TO RUN PAGEMAKER ON A MAC!!!!!! I WANT TO RUN PAGEMAKER ON A MAC!!!!!!
Is that too much to ask?
AM I A MONSTER FOR WANTING SOMETHING SO SIMPLE?
It's a great program, it's a fantastic program. Adobe, why do you want to kill it. What did it ever do to you but bring you money. Is that such a crime?

Thanks for the response.
I just might try out page plus- when I absolutely have to. I might not upgrade to Win 7 if it won't support pagemaker.
I love pagemaker! It is completely part of me.
PS:I'm going to have to change that message that automatically appears at the bottom of all my emails.
This email is from me. You know it's true because it says so right here, at the bottom of this email.
Date: Wed, 10 Mar 2010 04:09:36 -0700
From: [email protected]
To: [email protected]
Subject: WHEN IS ADOBE BRINGING OUT THE NEW PAGEMAKER FOR MAC?
Bacause I said so, you may find Bob and Big John's responses to you post a somewhat harsh. I'd call them suscinct and to the point. Nevertheless, they are quite correct. PM is dead. PM will NOT be fixed, upgraded or updated to run on Win Vista, Win 7 or the latest version of Mac OS X. So from that point of view, you HAVE to get over it! Unless of course you continue to run Win 2000 or XP.
Of course, there is always more than one way to skin a cat. One option is to use Win 7's XP mode. I do not have time to go into haow XP Mode works. Suffice to say that you need Win 7 Pro or Ultimate and an Intel or AMD cpu that supports virtualisation. How good is it? Well, I use an acient DOS program. on Win XP mode and it runs perfectly well. In this case I have no choice other than to use a true copy Win XP (which has nver been installed on this PC). XP mode is a perfectly viable alternative to this.
That said, I would NOT run a complex app such as PM on Win XP mode. Not that it would not work, but more from the point of view that XP Mode should be seen as a temporary fix or where an old program has to be used which will NOT gain any upgrades or updates and where NO OTHER alternative program exists, such as my old DOS program.
With PM, there is an upgrade called InDesign. Yes, you may not like this situation, and neither did I a few years ago. However, the writing was on the wall for PM as soon as InDesign was announced in 1999 and launched in 2000. PM was then 'downshifted' into becoming a business publishing platform to compete more with the likes of MS Publisher, hence the more business orientated marketing. As time went on it became clear that the future of Adobe's publishing focus was InDesign, even though I was assured at an Adobe seminar years ago that PM would continue with more InDesign features!
Remember, InDesign was not only a response to the technical challenges og making PM comlient with thae latest Win and Mac OS's, it was also a response to QuarkXpress which had left PM far behind by 1992.
Adobe is not the only answer of course. No one is forcing you to use InDesign. If I were you, I'd strongly consider PagePlus. It runs on Win Vista and 7 and no doubt packs a lot more up to date featutes than PM 7 does right now. It is also updated, upgraded AND supported! Or if you're happy to use what is essentially a drawing program with some DTP options, give CorelDraw a look.
Ian
>

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I should have posted this for you a while ago. My apologies for not doing it sooner. This was passed on to me by another user R C-R
He deserves the credit for this workaround. This is his post from an area in the forum where you have to be level 6 or higher in which to participate.
I am getting the same (global) error using iTunes 10.3.1 on a 2008 MacBook running 10.6.8.
A really, really awkward workaround that works for me (for now) is if you have the URL of the Internet radio server you can go to Advanced > Open Stream... (in iTunes 10.x) or type command + U, enter it there & click OK. The station should play fine in 10.x.
You can get the URL from any version of iTunes that still supports the "radio tuning service" (which I gather is an Apple server thing Apple is no longer supporting for 10.x). Play the station normally from the newer version & type command + I to open the info window. At the bottom of the "Summary" tab you will see the URL. (Annoyingly, you can't copy the text so you will have to write it down.)
Once you have that, you can play the station in 10.x & add it to a playlist for future use.
To check this out, maybe try http://198.27.80.37/stream/mbarsott.pls -- it is a European Jazz station that works fine for me with iTunes 10.3.1.
This workaround does work, but is a bit cumbersome. I'm still holding out hope that it is just a glitch.

Can't bring out the video control penal

Similar Messages

Maybe you are looking for