Can't bring self contained Quicktime movie into DVD Studio Pro?

Is this possible in FCS 1? I'm trying to bring my self contained movie from FCP into DSP so I can encode it (compressor takes FOREVER). Any ideas? Thanks.

If it takes forever in compressor, add extra time for DVDSP!
How big is the file? What format are you encoding in?

Similar Messages

Importing 1080/24p sequence into DVD Studio Pro 4

Perhaps the answer here is as simple as "DVD Studio Pro doesn't do Blu-ray." In any event, I recently got a Sony HXR-NX5U, which, among its many functions, shoots 1080 at 24p, 30p and 60i. Following these instructions from Ken Stone (http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html), I was able to output a 1080/24p movie and burn it to the hybrid format he describes, which plays fine on my PlayStation 3.
However, when I try and bring the files that were created as a result of the "Share" command in FCP 7.0.3 (which are an ac3 file and an H.264 file), DVD Studio Pro will not recognize the H.264 video file and says that it is invalid. I'm assuming that the "Share" command creates these files via Compressor... if I'm wrong, please let me know.
However, if I just do a straight export of my 1080/24p timeline as a QuickTime movie, then DVD Studio Pro will accept the files, marking it with a "yellow" indictator, indicating that it needs to be processed.
What I'm wondering is... is there a way to export using Compressor so that DVD Studio Pro will accept the files? If I just do a straight export from the FCP timeline as a QuickTime movie and let DVD Studio Pro do the encoding, will it remain 24p?
Bear in mind I'm not trying to burn a blu-ray disc.
Thank you!

DVD SP does't do Blu-Ray.
If you have time to kill, do a search on the forum for hours of entertaining reading on this subject.
To create a DVD, use Compressor to generate the m2v and ac3 files needed by DVDSP to author a DVD.
Again, a search of this forum will turn up hundreds of threads - most of which are restating the process for authoring that is spelled out in the manual.
x

How can I cut off part of a movie in DVD Studio Pro created in Quicktime?

I created a project in iMovie, then exported it to a Quicktime file to import into DVD Studio Pro. Now that I have imported it to DVD Studio Pro, it is too big to burn onto 1 disc. I would like to be able to chop off a few minutes of the movie in DVD Studio Pro, but Im not sure how to do it. I am assuming there is some way to chop off part of a movie in the Track editor - can anyone please help with this?
Thanks

Yes, you can trim a track, but it is a rudimentary control, and not frame accurate.
I think Hal has oversimplified: the process is frame accurate - it is just that your choice of edit points is limited to 'I frames' only. 'I frames' occur about every 12 frames, or 1/2 second, for a typical PAL mpeg2 video track, and every 15 frames, or 1/2 second, for a typical NTSC mpeg2 video track.

How can I import .mov file into dvd studio pro?

Hi,
I have a .mov file and want to but a dvd with menu and chapters. But when I try to import the .mov file into dvd studio pro it says Incompatible format. How can I import my .mov file in to dvd studio pro?

Two ways…
Transcode into a codec like Pro Res, import into DVDSP and let it do the encoding.
Or better yet:
Import into Compressor, choose a DVD preset and let Compressor encode. It will make two files, separate video and audio files. Import those into DVDSP.
Good luck.
Russ

IMovei '11 .mov films into DVD Studio Pro 4

I am in the process of moving from iLife to Final Cut Studio Software. I still have some movies in iMovie '11, which I want to burn on DVD. As iDVD is in a non-workable state on my Mac I want to use DVD Studio Pro4. I export the movies using the "Export using Quicktime" option as DVD Studio Pro claims to be able to import any Quicktime movie. However, when I try to import, I get the message that the format is not supported.
Surely there's something I'm missing here. Can anybody shed some light on this matter?

DVD SP does't do Blu-Ray.
If you have time to kill, do a search on the forum for hours of entertaining reading on this subject.
To create a DVD, use Compressor to generate the m2v and ac3 files needed by DVDSP to author a DVD.
Again, a search of this forum will turn up hundreds of threads - most of which are restating the process for authoring that is spelled out in the manual.
x

Best program to create slideshow for inserting into DVD Studio Pro project?

I will be creating my final DVD in DVD Studio Pro soon and want to add an appealing slideshow as well. Before wasting my time, yet again, can somebody suggest the best program to use in order to bring it into DVD Studio Pro please?
Thank you.
Mitaka27

Be aware that a there is a difference between a video that consists of a slideshow, and what DVDs consider a slideshow.
If you want a DVD slideshow, then I suggest taking a look at one of the Lord of the Rings Extended Release DVDs. On the two extra discs with each movie there are plenty of DVD slideshows. With a DVD slideshow you can go forward or back through the slideshow. You can stay on any slide as long as you like. A slide can contain audio. Audio cannot carry over from one slide to another. There is no transitions from one slide to another.
What I suspect is that you want a video that acts like a slideshow. In that case, do not use the slideshows in DVD SP at all. Create your video outside of DVD SP, then just place it in a Track and treat it as any other video.
That being said, do you want a lot of control over how the video slideshow is created, or do you want a program that will do most of the work for you at the expense of not having absolute control over how things are put together? If you want full control then create your video slideshow in FCP/Motion. If you want a program that will do a lot of the work for you, then you should look into iPhoto. It can create some pretty spectacular slideshows very easily, but you will not have the full control you have with FCP.

Why can't I change my subtitles' appearance in DVD Studio Pro?

Hello there.
So, I'm pretty confused. I created an .stl closed caption file in MovieCaptioner which I then imported into DVD Studio Pro. Understandibly (if not, annoyingly), I lost my original subtitle formatting, including font size, color, font, and the black bar I had originally positioned the text over to make it easier to read.
I'm not trying to change the captions within DVD Studio Pro but whenever I select all (or even just select one individual caption) the option to change the coordinates, etc, is greyed out and I can't select anything. And when I hit command + T and change the font, it doesn't do anything to the overall stream. I just want to make the subtitles larger and add a black bar behind them. Not sure what I'm doing wrong..
Thanks in advance!

DVD Studio Pro is only capable of authoring HD DVD, which is an obsolete format, or SD DVD. Unfortunately, it cannot do Blu Ray.
If you want HD, you can make a basic Blu Ray directly from FCPX, or from Compressor, using a Blu Ray burner. If your movie is less than 35 minutes long, you could alternatively make am AVCHD red laser disk, using the Blu Ray template with a DVD optical drive selected as Output Device. (AVCHD disks are HD resolution, but are encoded with somewhat less quality than Blu Ray; nonetheless, they look very good.)
The other HD options for disk delivery rely on third party solutions - including Roxio Toast and Adobe Encore.
Good luck.
Russ

Importing DVD media into DVD Studio Pro 4

Hello all. Here's my quandy.
I recorded some material to a series of DVD's from Betacam masters. The DVD's were recorded on a Sony DVD recorder (dont' know the model off hand) on DVD-R media. I would like to import the material into DVD Studio Pro 4 so I can create a single disc containing all material.
For some reason I cannot import the files from the disc. I used the import command and received confirmation that files were imported but when I tried to play them in the preview window the clip would play for a couple of seconds and then stop cold.
I'm a novice here, so take that into account when telling me what stupid pilot error mistake I'm making. Deal? Thanks.
Marc

What Aldershot said...
If the DVD-R with your clips on was recorded and made into a disc that you can watch in a DVD player then you need to extract the MPEGs from the folders on that disc, which you can then import into DVDSP.
You need to use elementary streams - that is video and audio separate. If you are using MPG files it is likely that they are combined audio and video and will need splitting apart. MPEG Stream clip is one option, another is bbDEMUX which I tend to use more frequently. There are other tools available as well - hunt through Version Tracker or just google for them.
Welcome to the world of DVD!

Is it possible to import a .pdf or .doc file into DVD studio Pro 4?

When I finally finish my 2D animation for my Senior Project and finally make the DVD, I want to include the short story that the animation is based on to the DVD. I want to import it as .pdf or a .doc into DVD Studio Pro 4. What I want to know is, is if this is possible, or if is not, is there another acceptable file format that I can use if .pdf or .doc isn't possible?
Message was edited by: obisgirl

Techincally you can create a link to take it to the file... but there are so many different software DVD players that it doesnt work with 90% of them so its pointless..
as for including your files on the DVD....
First make sure your files are all in one folder called DVD Content or something like that so they know its in that location
then in DVDSP at the top where all the icons are...
hit build and format.
in the general tab you will see...
Disc
Source
DVD-ROM Data
destination
under DVD-ROM Data check the content box.
Choose the folder you have all your files in.
joliet extension support doesnt really matter but i always click it so that windows can identify better what file format it is.
then continue building and formating.
let me know if that works or if you run into an issue.

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

Importing IMovie File into DVD Studio Pro 4

I used to be able to import the index file from an IMovie project into DVD Studio Pro quite happily.
Today the application freezes on the import progress window, with no files appearing in the asset window.
I have to force quit the application to get out of it.
Can anyone advise how to resolve this issue ?
Power Mac G5 - Dual 2GHz Mac OS X (10.4.2)

If you haven't changed anything on your system, then it would appear that you have one of two things.
Most likely, your preference files have be come corrupt, or second, your Application or application resource file for DVD SP have become damaged.
Try first to toss your DVD SP preferences, if this doesn't do it, then you should uninstall DVD SP and then reinstall with all of the updates before trying again.
If you have tried creating a new project from scratch and the problem persists, then read on.
If that doesn't do it, then there's a very slight possiblility, that there may be an issue with the QucikTime files of the OS, and keep in mind, (this is a very remote possibility) you may have to wipe the drive and reinstall the OS and apps. from the original disks, but only after everything else fails, (THIS IS A DRASTIC LAST DITCH EFFORT.)

Importing subtitles into DVD Studio Pro 4 that were created FCP Studio 6

Greetings!
So in all the DVD Studio Pro 4 documentation, I couldn't find any work flow that allowed you to create subtitles, via *Text or Boris 3D Titles* in Final Cut Pro Studio 6 and then export or import your work into DVD Studio Pro to be used in the subtitle fields... Is that possible?
After painstakingly entering in subtitles for a feature film line-by-line, timing them perfectly to picture and making them look beautiful with crisp-text & a slight drop-shadow... It would be wonderful to import those files (as graphics files? DVD Studio Pro can import those...) in our DVD for release, with optional subtitles-- Instead of making/encoding 2 versions; with & without subtitles.
What is the best way to export these files, created for the film subtitling in *Text or Boris 3D Titles* so that we can import them into DVD Studio Pro 4 subtitle tracks... Could they be exported with an Alpha Channel so that the background is transparent? And will this then be excepted into DVD Studio Pro 4 to be placed in the subtitle fields?
Please help us conquer this seemingly-necessary procedure... I would really hate to think that to achieve this task we'd have to re-enter, re-design & re-time ALL subtitles to make our DVD... All of your suggestions would be most appreciated.
Thanks,
Jason

OK-- I love that I've found a way to answer my own question on this forum (but actually I must credit my buddy James for finding out about 'TitleExchange Pro') It looks pretty cool and should do exactly what I've asked about: Exporting/ Importing subtitles made in FCP to DVD SP...
TitleExchange Pro is a unique tool which makes complicated things simple.
If you ever wished to get your titles out of FCP into DVDSP (or another DVD authoring application), get titles into FCP from another source like DVDSP or STL, or ceate a QT with all your FCP subtitles without the need of rendering (and get automatic selection of language) or just "equalize" your FCP titles TEP will be the right tool.
There's a slight catch but it might be worth it, if this works as well as it states...Cost 135 EUR:) You can download a limited demo version that works for 30 days & 50 titles...If anyone wants to give their feedback on this software, please post it here-- We'd all be interested.
Download & more information about this process at: http://www.spherico.de/filmtools/TitleExchange/
Also, check out this video tutorial on the product... It explains exactly how to do the task-at-hand... http://www.studiodaily.com/main/minisites/finalcutpro/f/mtutorials/6851.html
Hope this finds you all well--
Peace,
Jason

Hello. How do I get my FCP sequence into DVD Studio Pro? I've tried exporting as QT movie, then importing as asset, am told format is incompatible.

Trying to get my HD sequence in FCP to burn to DVD. How to accomplish this? I export sequence as Quicktime movie, try to import as as asset, after a couple minutes a window says "format incompatible" or something to that effect.
Also, in FCP the canvas only shows timeline video when it's playing. When stopped, blank screen -- how do I fix this?
Many thanks.

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Can't Import MP4 Files Into DVD Studio Pro

I'm trying to start a DVD Studio Pro 4 project, and have .mp4 video files. When I import them with the Assets>Import tab, they come in as MP4 audio files only, not movie files. The users manual says the integrated encouder auto encodes Quick Time assets into DVD compliant formats with default Compressor settings ... but that is not happening. The MP4s play fine when I double click and open them in Quick Time Player, or post them on line they work fine in a browser. I'm confused, how do I import them to work in DVD Studio Pro? BTW, I did not create them in FCP, nor do I know how to use Compressor yet. I have MPEG Stream Clip but don't know how it would help. Thanks, Tom, Miami.

Use compressor to convert them to m2v and ac3 files before bringing them into DVDSP.
x

Can't bring self contained Quicktime movie into DVD Studio Pro?

Similar Messages

Maybe you are looking for