Can't browse to UCCX 8 appadmin after upgrade:

I just finished installing UCCX 8.02 and can't browse to http://Servername/appadmin. I can reach http://Servername just fine and see the link for Contact Center Express but when I click on it I get a blank page. No errors or nothing.
Is there a process that I should restart or start?
Thanks in advance.
Phil

Hi Phil,
Is UCCX 8.0(2) on a Vmware platform - If yes make sure its running on the following hardware and software platform
========
UCS B200 M1 Blade Server (or)
UCS C210 M1
Supported VMware platform is ESXi 4.0
=============
a) Try the following URL and see if the APPADMIN page pops up
https://X.X.X.X:8443/appadmin/main
b) If this does not help try rebooting the box through CLI - command is "utils system restart"
c) Else upgrade the box to SU1 or open up a case with TAC
From the link below you can download the the SU1 link
===
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=8.0(2)_SU1&mdfid=270569180&sftType=Cisco+Customer+Response+Solution+Software+Releases&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+Customer+Response+Solution+Software&treeMdfId=&treeName=Voice+and+Unified+Communications&modifmdfid=null&imname=&hybrid=null&imst=null&lr=Y
========
Hope this helps
Thank you
Anuj

Similar Messages

Why can't i activate my iphone 3gs after upgrading it to ios 6?

why can't i activate my iphone 3gs after upgrading it to ios 6?
It says,
''There is no sim card installed in the iphone you are attempting to activate''
Thanks for your help in advance!
Kayl07

There are several common causes for this problem:
Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
Your phone is jailbroken or otherwise hacked.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Why can't I access my Gmail account after upgrading to YOSEMITE

Why can't I access my Gmail account after upgrading to Yosemite

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Why can't I use word, excel etc after upgrading OS X lion ?

Why can´t I use word,excel etc after upgrading too OS X Lion ?

Office 2004 is a PowerPC app that requires Rosetta to run. Roseeta and thus all PPC aps are not supported on Lion. Further Office 2008's Installer is a PPC app. Office 2008 will run if installed before installing Lion, but you cannot install it from Original Office 2008 Media after installing Lion.
Steve

Why can't I open my numbers docs after upgrade to 3.0?

why can't I open my numbers docs after upgrade to 3.0? I have downloaded Maverick. I had the same problem with Pages at first. Is there any way to get my spreadsheets back? I'm nervous about upgrades anymore.

If you recently updated to Mavericks and updated the Numbers to 3.0 then it is likely you are trying to open a Numbers 3.0 file with Numbers 2.3.
Numbers 2.3 Numbers 3.0
Be sure you are careful about which version you are launching and using to open files. If you want to be able to open a file in Numbers 2.3 then you should continue using Numbers 2.3 (which is located in the folder "/Applications/iWork '09")
If you already opened a Numbers file in 3.0 and saved if but want to open in 2.3 you can export from Numbers 3.0 by using the menu item "File > Export To > Numbers '09..."

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

TS3649 Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem?

Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem? I've been making slideshows for ages using iPhoto and iDVD and it's suddenly stopped. Urgent help needed.

Are you saying that you cannot export a slideshow from iPhoto to the Desktop and then drag it from the Desktop (or the Movie frolder where it can be stored) into an open iDVD menu window?
Export the slideshow at the large or medium size:
They drag the movie file into the open iDVD window. NOTE: do not move the movie file once it's been added to iDVD. That's why it should be placed in folder where you intend to keep it permanently or at least until the iDVD project is completed and burned to a disk image and then to disk.
OT

Can't browse web sites My IPAD after trying to update to Itune 10

I tried to update to ITUNE 10. Once restarted , I can access my home WIFI network but can't browse the internet web sites at all , please help since MY IPAD now is useless!!

OMG , it took me 5 seconds to reset my router and got my IPAD starting all over again!!

Can't log in to Google/Gmail after upgrade to 10.6.3

Hi All,
I just upgraded to 10.6.3 and thought all was well until I tried logging in to my Gmail/Google account.
After entering my login info I got a redirect to a Google page telling me my browser cookie settings weren't correct and to clear the cache.
I cleared the browser cache, checked cookie settings, repaired permissions and rebooted, but I still can't login with Safari. The login screen keeps reloading and asking for my password.
I can log in with Chrome and FireFox. And Mail seems to be working well (set up to retrieve my Gmail messages). But I need to have web access to various Google services.
Has anyone else experience this after upgrading to 10.6.3? Any ideas on how to fix this?
Thanks

HI,
I responded to you over here: http://discussions.apple.com/thread.jspa?messageID=11427835#11427835
Carolyn

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Can no longer sync Ipod to Itunes after upgrading to Itunes 7

I can no longer sync Ipod to Itunes since upgrading to Itunes 7. When I try it freezes my Itunes and I have to force quit the application. Anyone else know how to solve this? Anyone else having this problem?
Powerbook G4 Mac OS X (10.4.9)

I have the 3rd generation IPod and I thought it happened when I dropped it, but after thinking about it it did happen the same time I switched to itunes v7.
I have to stop the auto-sync and have the ipod completely restored each time. So when I want to update my ipod I have make it an hour adventure.

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

Can't browse to UCCX 8 appadmin after upgrade:

Similar Messages

Maybe you are looking for